Shortly we will want to load a percpu variable in the return from
userspace path. We can save an instruction by folding the addition of
the percpu offset into the load instruction, and this patch adds a new
helper to do so.
At the same time, we clean up this_cpu_ptr for consistency. As with
{adr,ldr,str}_l, we change the template to take the destination register
first, and name this dst. Secondly, we rename the macro to adr_this_cpu,
following the scheme of adr_l, and matching the newly added
ldr_this_cpu.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bug: 38331309
Change-Id: Iaaf4ea9674ab89289badee216b5305204172895e
(cherry picked from commit 1b7e2296a822dfd2349960addc42a139360ce769)
Signed-off-by: Zubin Mithra <zsm@google.com>
In the absence of CONFIG_THREAD_INFO_IN_TASK, core code maintains
thread_info::cpu, and low-level architecture code can access this to
build raw_smp_processor_id(). With CONFIG_THREAD_INFO_IN_TASK, core code
maintains task_struct::cpu, which for reasons of hte header soup is not
accessible to low-level arch code.
Instead, we can maintain a percpu variable containing the cpu number.
For both the old and new implementation of raw_smp_processor_id(), we
read a syreg into a GPR, add an offset, and load the result. As the
offset is now larger, it may not be folded into the load, but otherwise
the assembly shouldn't change much.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bug: 38331309
Change-Id: I154927b0f9fc0ebbbed88c9958408bbb19cf09de
(cherry picked from commit 57c82954e77fa12c1023e87210d2ede77aaa0058)
Signed-off-by: Zubin Mithra <zsm@google.com>
Subsequent patches will make smp_processor_id() use a percpu variable.
This will make smp_processor_id() dependent on the percpu offset, and
thus we cannot use smp_processor_id() to figure out what to initialise
the offset to.
Prepare for this by initialising the percpu offset based on
current::cpu, which will work regardless of how smp_processor_id() is
implemented. Also, make this relationship obvious by placing this code
together at the start of secondary_start_kernel().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bug: 38331309
Change-Id: I43304d06602216fbb5b968ff83e0face11e238f5
(cherry picked from commit 580efaa7ccfb8c0790dce4396434f0e5ac8d86ee)
Signed-off-by: Zubin Mithra <zsm@google.com>
When returning from idle, we rely on the fact that thread_info lives at
the end of the kernel stack, and restore this by masking the saved stack
pointer. Subsequent patches will sever the relationship between the
stack and thread_info, and to cater for this we must save/restore sp_el0
explicitly, storing it in cpu_suspend_ctx.
As cpu_suspend_ctx must be doubleword aligned, this leaves us with an
extra slot in cpu_suspend_ctx. We can use this to save/restore tpidr_el1
in the same way, which simplifies the code, avoiding pointer chasing on
the restore path (as we no longer need to load thread_info::cpu followed
by the relevant slot in __per_cpu_offset based on this).
This patch stashes both registers in cpu_suspend_ctx.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This is a modification of Mark Rutland's original patch. The differences
from the original patch are as follows :-
- NR_CTX_REGS is set to 13 instead of 12
- x13 and x14 are used as temporary registers to hold sp_el0 and
tpidr_el1 instead of x11 and x12.
- The values are temporarily stashed at offset 88 and 96 of
cpu_suspend_ctx instead of 80 and 88.
The original patch would not apply cleanly and these changes were made
to resolve this.
Bug: 38331309
Change-Id: I4e72aebd51e99d3767487383c14a1ba784312bf1
(cherry picked from commit 623b476fc815464a0241ea7483da7b3580b7d8ac)
Signed-off-by: Zubin Mithra <zsm@google.com>
When CONFIG_THREAD_INFO_IN_TASK is selected, task stacks may be freed
before a task is destroyed. To account for this, the stacks are
refcounted, and when manipulating the stack of another task, it is
necessary to get/put the stack to ensure it isn't freed and/or re-used
while we do so.
This patch reworks the arm64 stack walking code to account for this.
When CONFIG_THREAD_INFO_IN_TASK is not selected these perform no
refcounting, and this should only be a structural change that does not
affect behaviour.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bug: 38331309
Change-Id: I89c4f53c4fea0d0be2f88221489c0c7f43366810
(cherry picked from commit 9bbd4c56b0b642f04396da378296e68096d5afca)
Signed-off-by: Zubin Mithra <zsm@google.com>
The walk_stackframe functions is architecture-specific, with a varying
prototype, and common code should not use it directly. None of its
current users can be built as modules. With THREAD_INFO_IN_TASK, users
will also need to hold a stack reference before calling it.
There's no reason for it to be exported, and it's very easy to misuse,
so unexport it for now.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bug: 38331309
Change-Id: Ibe0dca36cc7d35f92c6bc13b373755d82f0eb9ef
(cherry picked from commit 2020a5ae7c8c2c8504565004915017507b135c63)
Signed-off-by: Zubin Mithra <zsm@google.com>
In arm64's die and __die routines we pass around a thread_info, and
subsequently use this to determine the relevant task_struct, and the end
of the thread's stack. Subsequent patches will decouple thread_info from
the stack, and this approach will no longer work.
To figure out the end of the stack, we can use the new generic
end_of_stack() helper. As we only call __die() from die(), and die()
always deals with the current task, we can remove the parameter and have
both acquire current directly, which also makes it clear that __die
can't be called for arbitrary tasks.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bug: 38331309
Change-Id: Ie1a96a0a8e244d458a7f147001b64216403e07c4
(cherry picked from commit 876e7a38e8788773aac768091aaa3b42e470c03b)
Signed-off-by: Zubin Mithra <zsm@google.com>
We define current_stack_pointer in <asm/thread_info.h>, though other
files and header relying upon it do not have this necessary include, and
are thus fragile to changes in the header soup.
Subsequent patches will affect the header soup such that directly
including <asm/thread_info.h> may result in a circular header include in
some of these cases, so we can't simply include <asm/thread_info.h>.
Instead, factor current_thread_info into its own header, and have all
existing users include this explicitly.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bug: 38331309
Change-Id: I4d6bc27bef686d0dade1d6abe1ce947cf6c4dfb3
(cherry picked from commit a9ea0017ebe8889dfa136cac2aa7ae0ee6915e1f)
Signed-off-by: Zubin Mithra <zsm@google.com>
Subsequent patches will move the thread_info::{task,cpu} fields, and the
current TI_{TASK,CPU} offset definitions are not used anywhere.
This patch removes the redundant definitions.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This is a modification of Mark Rutland's original patch. Guards to
check if CONFIG_THREAD_INFO_IN_TASK is used has been inserted.
Bug: 38331309
Change-Id: I95903e0f862fc5dcf89e51926afa22389f2f7cee
(cherry picked from commit 3fe12da4c7fa6491e0fb7c5371716ac7f8ea80a5)
Signed-off-by: Zubin Mithra <zsm@google.com>
We have a comment claiming __switch_to() cares about where cpu_context
is located relative to cpu_domain in thread_info. However arm64 has
never had a thread_info::cpu_domain field, and neither __switch_to nor
cpu_switch_to care where the cpu_context field is relative to others.
Additionally, the init_thread_info alias is never used anywhere in the
kernel, and will shortly become problematic when thread_info is moved
into task_struct.
This patch removes both.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bug: 38331309
Change-Id: Ia4769ddcc6fc556e9eb6193d64fc99fe2d9e39ab
(cherry picked from commit dcbe02855f048fdf1e13ebc697e83c8d297f9f5a)
Signed-off-by: Zubin Mithra <zsm@google.com>
When CONFIG_THREAD_INFO_IN_TASK is selected, the current_thread_info()
macro relies on current having been defined prior to its use. However,
not all users of current_thread_info() include <asm/current.h>, and thus
current is not guaranteed to be defined.
When CONFIG_THREAD_INFO_IN_TASK is not selected, it's possible that
get_current() / current are based upon current_thread_info(), and
<asm/current.h> includes <asm/thread_info.h>. Thus always including
<asm/current.h> would result in circular dependences on some platforms.
To ensure both cases work, this patch includes <asm/current.h>, but only
when CONFIG_THREAD_INFO_IN_TASK is selected.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bug: 38331309
Change-Id: Ia981a829798d60a54d4e3eb679d8e24b01228357
(cherry picked from commit dc3d2a679cd8631b8a570fc8ca5f4712d7d25698)
Signed-off-by: Zubin Mithra <zsm@google.com>
Since commit f56141e3e2 ("all arches, signal: move restart_block
to struct task_struct"), thread_info and restart_block have been
logically distinct, yet struct restart_block is still defined in
<linux/thread_info.h>.
At least one architecture (erroneously) uses restart_block as part of
its thread_info, and thus the definition of restart_block must come
before the include of <asm/thread_info>. Subsequent patches in this
series need to shuffle the order of includes and definitions in
<linux/thread_info.h>, and will make this ordering fragile.
This patch moves the definition of restart_block out to its own header.
This serves as generic cleanup, logically separating thread_info and
restart_block, and also makes it easier to avoid fragility.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bug: 38331309
Change-Id: I4283c87072c092179e2b6c02cbf7248b4a1c2d22
(cherry picked from commit 53d74d056a4e306a72b8883d325b5d853c0618e6)
Signed-off-by: Zubin Mithra <zsm@google.com>
get_task_struct(tsk) no longer pins tsk->stack so all users of
to_live_kthread() should do try_get_task_stack/put_task_stack to protect
"struct kthread" which lives on kthread's stack.
TODO: Kill to_live_kthread(), perhaps we can even kill "struct kthread" too,
and rework kthread_stop(), it can use task_work_add() to sync with the exiting
kernel thread.
Message-Id: <20160629180357.GA7178@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jann Horn <jann@thejh.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/cb9b16bbc19d4aea4507ab0552e4644c1211d130.1474003868.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bug: 38331309
Change-Id: I2872658e56dcb1ab4173c490ef8f52affa54a404
(cherry picked from commit 23196f2e5f5d810578a772785807dcdc2b9fdce9)
Signed-off-by: Zubin Mithra <zsm@google.com>
There are a few places in the kernel that access stack memory
belonging to a different task. Before we can start freeing task
stacks before the task_struct is freed, we need a way for those code
paths to pin the stack.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jann Horn <jann@thejh.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/17a434f50ad3d77000104f21666575e10a9c1fbd.1474003868.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bug: 38331309
Change-Id: I414853e9b72ecb0967d5e1cbfc77b4929bf3f4f5
(cherry picked from commit c6c314a613cd7d03fb97713e0d642b493de42e69)
Signed-off-by: Zubin Mithra <zsm@google.com>
If an arch opts in by setting CONFIG_THREAD_INFO_IN_TASK_STRUCT,
then thread_info is defined as a single 'u32 flags' and is the first
entry of task_struct. thread_info::task is removed (it serves no
purpose if thread_info is embedded in task_struct), and
thread_info::cpu gets its own slot in task_struct.
This is heavily based on a patch written by Linus.
Originally-from: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jann Horn <jann@thejh.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a0898196f0476195ca02713691a5037a14f2aac5.1473801993.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bug: 38331309
Change-Id: I25e5a830f2ada5e74fa93661e97e5e701b1b70d2
(cherry picked from commit c65eacbe290b8141554c71b2c94489e73ade8c8d)
Signed-off-by: Zubin Mithra <zsm@google.com>
We currently show:
task: <current> ti: <current_thread_info()> task.ti: <task_thread_info(current)>"
"ti" and "task.ti" are redundant, and neither is actually what we want
to show, which the the base of the thread stack. Change the display to
show the stack pointer explicitly.
Link: http://lkml.kernel.org/r/543ac5bd66ff94000a57a02e11af7239571a3055.1468523549.git.luto@kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 38331309
Change-Id: I7d4b915d38770d0c9384695b2064e4c66b22e94e
(cherry picked from commit 8b70ca65616b3588ea1907e87f0df6d2530350df)
Signed-off-by: Zubin Mithra <zsm@google.com>
The INIT_TASK() initializer was similarly confused about the stack vs
thread_info allocation that the allocators had, and that were fixed in
commit b235beea9e99 ("Clarify naming of thread info/stack allocators").
The task ->stack pointer only incidentally ends up having the same value
as the thread_info, and in fact that will change.
So fix the initial task struct initializer to point to 'init_stack'
instead of 'init_thread_info', and make sure the ia64 definition for
that exists.
This actually makes the ia64 tsk->stack pointer be sensible for the
initial task, but not for any other task. As mentioned in commit
b235beea9e99, that whole pointer isn't actually used on ia64, since
task_stack_page() there just points to the (single) allocation.
All the other architectures seem to have copied the 'init_stack'
definition, even if it tended to be generally unusued.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 38331309
Change-Id: Ia96e9225b07e38df2f4af2b9a7eb2aa972d8845a
(cherry picked from commit 7f1a00b6fcd0e3c19beba2e92d157dc0c2cf3494)
Signed-off-by: Zubin Mithra <zsm@google.com>
We've had the thread info allocated together with the thread stack for
most architectures for a long time (since the thread_info was split off
from the task struct), but that is about to change.
But the patches that move the thread info to be off-stack (and a part of
the task struct instead) made it clear how confused the allocator and
freeing functions are.
Because the common case was that we share an allocation with the thread
stack and the thread_info, the two pointers were identical. That
identity then meant that we would have things like
ti = alloc_thread_info_node(tsk, node);
...
tsk->stack = ti;
which certainly _worked_ (since stack and thread_info have the same
value), but is rather confusing: why are we assigning a thread_info to
the stack? And if we move the thread_info away, the "confusing" code
just gets to be entirely bogus.
So remove all this confusion, and make it clear that we are doing the
stack allocation by renaming and clarifying the function names to be
about the stack. The fact that the thread_info then shares the
allocation is an implementation detail, and not really about the
allocation itself.
This is a pure renaming and type fix: we pass in the same pointer, it's
just that we clarify what the pointer means.
The ia64 code that actually only has one single allocation (for all of
task_struct, thread_info and kernel thread stack) now looks a bit odd,
but since "tsk->stack" is actually not even used there, that oddity
doesn't matter. It would be a separate thing to clean that up, I
intentionally left the ia64 changes as a pure brute-force renaming and
type change.
Acked-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 38331309
Change-Id: I870b5476fc900c9145134f9dd3ed18a32a490162
(cherry picked from commit b235beea9e996a4d36fed6cfef4801a3e7d7a9a5)
Signed-off-by: Zubin Mithra <zsm@google.com>
Otherwise, lower_fs->ioctl() fails due to inode_owner_or_capable().
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Bug: 63260873
Change-Id: I623a6c7c5f8a3cbd7ec73ef89e18ddb093c43805
-----BEGIN PGP SIGNATURE-----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=l+tE
-----END PGP SIGNATURE-----
Merge 4.4.80 into android-4.4
Changes in 4.4.80
af_key: Add lock to key dump
pstore: Make spinlock per zone instead of global
net: reduce skb_warn_bad_offload() noise
powerpc/pseries: Fix of_node_put() underflow during reconfig remove
crypto: authencesn - Fix digest_null crash
md/raid5: add thread_group worker async_tx_issue_pending_all
drm/vmwgfx: Fix gcc-7.1.1 warning
drm/nouveau/bar/gf100: fix access to upper half of BAR2
KVM: PPC: Book3S HV: Context-switch EBB registers properly
KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exit
KVM: PPC: Book3S HV: Reload HTM registers explicitly
KVM: PPC: Book3S HV: Save/restore host values of debug registers
Revert "powerpc/numa: Fix percpu allocations to be NUMA aware"
Staging: comedi: comedi_fops: Avoid orphaned proc entry
drm/rcar: Nuke preclose hook
drm: rcar-du: Perform initialization/cleanup at probe/remove time
drm: rcar-du: Simplify and fix probe error handling
perf intel-pt: Fix ip compression
perf intel-pt: Fix last_ip usage
perf intel-pt: Use FUP always when scanning for an IP
perf intel-pt: Ensure never to set 'last_ip' when packet 'count' is zero
xfs: don't BUG() on mixed direct and mapped I/O
nfc: fdp: fix NULL pointer dereference
net: phy: Do not perform software reset for Generic PHY
isdn: Fix a sleep-in-atomic bug
isdn/i4l: fix buffer overflow
ath10k: fix null deref on wmi-tlv when trying spectral scan
wil6210: fix deadlock when using fw_no_recovery option
mailbox: always wait in mbox_send_message for blocking Tx mode
mailbox: skip complete wait event if timer expired
mailbox: handle empty message in tx_tick
mpt3sas: Don't overreach ioc->reply_post[] during initialization
kaweth: fix firmware download
kaweth: fix oops upon failed memory allocation
sched/cgroup: Move sched_online_group() back into css_online() to fix crash
PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
RDMA/uverbs: Fix the check for port number
libnvdimm, btt: fix btt_rw_page not returning errors
ipmi/watchdog: fix watchdog timeout set on reboot
dentry name snapshots
v4l: s5c73m3: fix negation operator
Make file credentials available to the seqfile interfaces
/proc/iomem: only expose physical resource addresses to privileged users
vlan: Propagate MAC address to VLANs
pstore: Allow prz to control need for locking
pstore: Correctly initialize spinlock and flags
pstore: Use dynamic spinlock initializer
net: skb_needs_check() accepts CHECKSUM_NONE for tx
sched/cputime: Fix prev steal time accouting during CPU hotplug
xen/blkback: don't free be structure too early
xen/blkback: don't use xen_blkif_get() in xen-blkback kthread
tpm: fix a kernel memory leak in tpm-sysfs.c
tpm: Replace device number bitmap with IDR
x86/mce/AMD: Make the init code more robust
r8169: add support for RTL8168 series add-on card.
ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flags
ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output
net/mlx4: Remove BUG_ON from ICM allocation routine
drm/msm: Ensure that the hardware write pointer is valid
drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set
vfio-pci: use 32-bit comparisons for register address for gcc-4.5
irqchip/keystone: Fix "scheduling while atomic" on rt
ASoC: tlv320aic3x: Mark the RESET register as volatile
spi: dw: Make debugfs name unique between instances
ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL
irqchip/mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
openrisc: Add _text symbol to fix ksym build error
dmaengine: ioatdma: Add Skylake PCI Dev ID
dmaengine: ioatdma: workaround SKX ioatdma version
dmaengine: ti-dma-crossbar: Add some 'of_node_put()' in error path.
ARM64: zynqmp: Fix W=1 dtc 1.4 warnings
ARM64: zynqmp: Fix i2c node's compatible string
ARM: s3c2410_defconfig: Fix invalid values for NF_CT_PROTO_*
ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
usb: gadget: Fix copy/pasted error message
Btrfs: adjust outstanding_extents counter properly when dio write is split
tools lib traceevent: Fix prev/next_prio for deadline tasks
xfrm: Don't use sk_family for socket policy lookups
perf tools: Install tools/lib/traceevent plugins with install-bin
perf symbols: Robustify reading of build-id from sysfs
video: fbdev: cobalt_lcdfb: Handle return NULL error from devm_ioremap
vfio-pci: Handle error from pci_iomap
arm64: mm: fix show_pte KERN_CONT fallout
nvmem: imx-ocotp: Fix wrong register size
sh_eth: enable RX descriptor word 0 shift on SH7734
ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion
HID: ignore Petzl USB headlamp
scsi: fnic: Avoid sending reset to firmware when another reset is in progress
scsi: snic: Return error code on memory allocation failure
ASoC: dpcm: Avoid putting stream state to STOP when FE stream is paused
Linux 4.4.80
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 9f169b9f52a4afccdab7a7d2311b0c53a78a1e6b ]
When multiple front-ends are using the same back-end, putting state of a
front-end to STOP state upon receiving pause command will result in backend
stream getting released by DPCM framework unintentionally. In order to
avoid backend to be released when another active front-end stream is
present, put the stream state to PAUSED state instead of STOP state.
Signed-off-by: Patrick Lai <plai@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0371adcdaca92912baaa3256ed13e058a016e62d ]
If a call to mempool_create_slab_pool() in snic_probe() returns NULL,
return -ENOMEM to indicate failure. mempool_creat_slab_pool() only fails
if it cannot allocate memory.
https://bugzilla.kernel.org/show_bug.cgi?id=189061
Reported-by: bianpan2010@ruc.edu.cn
Signed-off-by: Burak Ok <burak-kernel@bur0k.de>
Signed-off-by: Andreas Schaertl <andreas.schaertl@fau.de>
Acked-by: Narsimhulu Musini <nmusini@cisco.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9698b6f473555a722bf81a3371998427d5d27bde ]
This fix is to avoid calling fnic_fw_reset_handler through
fnic_host_reset when a finc reset is alreay in progress.
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 08f9572671c8047e7234cbf150869aa3c3d59a97 ]
This headlamp contains a dummy HID descriptor which pretends to be
a mouse-like device, but can't be used as a mouse at all.
Reported-by: Lukas Ocilka <lukas.ocilka@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 13a6c8328e6056932dc680e447d4c5e8ad9add17 ]
Testing EP_FLAG_RUNNING in snd_complete_urb() before running the completion
logic allows us to save a few cpu cycles by returning early, skipping the
pending urb in case the stream was stopped; the stop logic handles the urb
and sets the completion callbacks to NULL.
Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 71eae1ca77fd6be218d8a952d97bba827e56516d ]
The RX descriptor word 0 on SH7734 has the RFS[9:0] field in bits 16-25
(bits 0-15 usually used for that are occupied by the packet checksum).
Thus we need to set the 'shift_rd0' field in the SH7734 SoC data...
Fixes: f0e81fecd4 ("net: sh_eth: Add support SH7734")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 14ba972842f9e84e6d3264bc0302101b8a792288 ]
All i.MX6 SoCs have an OCOTP Controller with 4kbit fuses. The i.MX6SL is
an exception and has only 2kbit fuses.
In the TRM for the i.MX6DQ (IMX6QDRM - Rev 2, 06/2014) the fuses size is
described in chapter 46.1.1 with:
"32-bit word restricted program and read to 4Kbits of eFuse OTP(512x8)."
In the TRM for the i.MX6SL (IMX6SLRM - Rev 2, 06/2015) the fuses size is
described in chapter 34.1.1 with:
"32-bit word restricted program and read to 2 kbit of eFuse OTP(128x8)."
Since the Freescale Linux kernel OCOTP driver works with a fuses size of
2 kbit for the i.MX6SL, it looks like the TRM is wrong and the formula
to calculate the correct fuses size has to be 256x8.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6ef4fb387d50fa8f3bffdffc868b57e981cdd709 ]
Recent changes made KERN_CONT mandatory for continued lines. In the
absence of KERN_CONT, a newline may be implicit inserted by the core
printk code.
In show_pte, we (erroneously) use printk without KERN_CONT for continued
prints, resulting in output being split across a number of lines, and
not matching the intended output, e.g.
[ff000000000000] *pgd=00000009f511b003
, *pud=00000009f4a80003
, *pmd=0000000000000000
Fix this by using pr_cont() for all the continuations.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4dcd19bfabaee8f9f4bcf203afba09b98ccbaf76 ]
Here, If devm_ioremap will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference.
This error check will avoid NULL pointer dereference.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7934c98a6e04028eb34c1293bfb5a6b0ab630b66 ]
Markus reported that perf segfaults when reading /sys/kernel/notes from
a kernel linked with GNU gold, due to what looks like a gold bug, so do
some bounds checking to avoid crashing in that case.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Report-Link: http://lkml.kernel.org/r/20161219161821.GA294@x4
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ryhgs6a6jxvz207j2636w31c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 30a9c6444810429aa2b7cbfbd453ce339baaadbf ]
Those are binaries as well, so should be installed by:
make -C tools/perf install-bin'
too.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-3841b37u05evxrs1igkyu6ks@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c86d77743a54fb2d8a4d18a037a074c892bb3be upstream.
On IPv4-mapped IPv6 addresses sk_family is AF_INET6,
but the flow informations are created based on AF_INET.
So the routing set up 'struct flowi4' but we try to
access 'struct flowi6' what leads to an out of bounds
access. Fix this by using the family we get with the
dst_entry, like we do it for the standard policy lookup.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 074859184d770824f4437dca716bdeb625ae8b1c ]
Currently, the sched:sched_switch tracepoint reports deadline tasks with
priority -1. But when reading the trace via perf script I've got the
following output:
# ./d & # (d is a deadline task, see [1])
# perf record -e sched:sched_switch -a sleep 1
# perf script
...
swapper 0 [000] 2146.962441: sched:sched_switch: swapper/0:0 [120] R ==> d:2593 [4294967295]
d 2593 [000] 2146.972472: sched:sched_switch: d:2593 [4294967295] R ==> g:2590 [4294967295]
The task d reports the wrong priority [4294967295]. This happens because
the "int prio" is stored in an unsigned long long val. Although it is
set as a %lld, as int is shorter than unsigned long long,
trace_seq_printf prints it as a positive number.
The fix is just to cast the val as an int, and print it as a %d,
as in the sched:sched_switch tracepoint's "format".
The output with the fix is:
# ./d &
# perf record -e sched:sched_switch -a sleep 1
# perf script
...
swapper 0 [000] 4306.374037: sched:sched_switch: swapper/0:0 [120] R ==> d:10941 [-1]
d 10941 [000] 4306.383823: sched:sched_switch: d:10941 [-1] R ==> swapper/0:0 [120]
[1] d.c
---
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>
#include <linux/types.h>
#include <linux/sched.h>
struct sched_attr {
__u32 size, sched_policy;
__u64 sched_flags;
__s32 sched_nice;
__u32 sched_priority;
__u64 sched_runtime, sched_deadline, sched_period;
};
int sched_setattr(pid_t pid, const struct sched_attr *attr, unsigned int flags)
{
return syscall(__NR_sched_setattr, pid, attr, flags);
}
int main(void)
{
struct sched_attr attr = {
.size = sizeof(attr),
.sched_policy = SCHED_DEADLINE, /* This creates a 10ms/30ms reservation */
.sched_runtime = 10 * 1000 * 1000,
.sched_period = attr.sched_deadline = 30 * 1000 * 1000,
};
if (sched_setattr(0, &attr, 0) < 0) {
perror("sched_setattr");
return -1;
}
for(;;);
}
---
Committer notes:
Got the program from the provided URL, http://bristot.me/lkml/d.c,
trimmed it and included in the cset log above, so that we have
everything needed to test it in one place.
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/866ef75bcebf670ae91c6a96daa63597ba981f0d.1483443552.git.bristot@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c2931667c83ded6504b3857e99cc45b21fa496fb ]
Currently how btrfs dio deals with split dio write is not good
enough if dio write is split into several segments due to the
lack of contiguous space, a large dio write like 'dd bs=1G count=1'
can end up with incorrect outstanding_extents counter and endio
would complain loudly with an assertion.
This fixes the problem by compensating the outstanding_extents
counter in inode if a large dio write gets split.
Reported-by: Anand Jain <anand.jain@oracle.com>
Tested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 43aef5c2ca90535b3227e97e71604291875444ed ]
This fixes an error message that was probably copied and pasted. The same
message is used for both the in and out endpoints, so it makes it impossible
to know which one actually failed because both cases say "IN".
Make the out endpoint error message say "OUT".
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c2a6bbaf0c5f90463a7011a295bbdb7e33c80b51 ]
The way acpi_find_child_device() works currently is that, if there
are two (or more) devices with the same _ADR value in the same
namespace scope (which is not specifically allowed by the spec and
the OS behavior in that case is not defined), the first one of them
found to be present (with the help of _STA) will be returned.
This covers the majority of cases, but is not sufficient if some of
the devices in question have a _HID (or _CID) returning some valid
ACPI/PNP device IDs (which is disallowed by the spec) and the
ASL writers' expectation appears to be that the OS will match
devices without a valid ACPI/PNP device ID against a given bus
address first.
To cover this special case as well, modify find_child_checks()
to prefer devices without ACPI/PNP device IDs over devices that
have them.
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3ef01c968fbfb21c2f16281445d30a865ee4412c ]
NF_CT_PROTO_DCCP/SCTP/UDPLITE were switched from tristate to boolean so
defconfig needs to be adjusted to silence warnings:
warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c415f9e8304a1d235ef118d912f374ee2e46c45d ]
The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core
which fixes some silicon bugs that needed software workarounds
in Version 1.0 that was used on Zynq systems.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Cc: Rob Herring <robh+dt@kernel.org>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4ea2a6be9565455f152c12f80222af1582ede0c7 ]
The patch removes these warnings reported by dtc 1.4:
Warning (unit_address_vs_reg): Node /amba_apu has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg): Node /memory has a reg or ranges
property, but no unit name
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 34a31f0af84158955a9747fb5c6712da5bbb5331 ]
The Skylake ioatdma is technically CBDMA 3.2+ and contains the same hardware
bits with some additional 3.3 features, but it's not really 3.3 where the
driver is concerned.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 086cc1c31a0ec075dac02425367c871bb65bc2c9 ]
The build robot reports:
.tmp_kallsyms1.o: In function `kallsyms_relative_base':
>> (.rodata+0x8a18): undefined reference to `_text'
This is when using 'make alldefconfig'. Adding this _text symbol to mark
the start of the kernel as in other architecture fixes this.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Acked-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 88e20c74ee020f9e0c99dfce0dd9aa61c3f0cca0 ]
The ICOLL controller doesn't provide any facility to configure the
wakeup sources. That's the reason why this implementation lacks
the irq_set_wake implementation. But this prevent us from properly
entering power management states like "suspend to idle".
So enable the flags IRQCHIP_SKIP_SET_WAKE and
IRQCHIP_MASK_ON_SUSPEND to let the irqchip core allows and handles
the power management.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Link: https://lkml.kernel.org/r/1482863397-11400-1-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a1792cda51300e15b03549cccf0b09f3be82e697 ]
The clk_ref_div is not configured in the correct position of the
register. The patch fixes that clk_ref_div, Pre-Scalar, is assigned
the wrong value.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 13288bdf4adbaa6bd1267f10044c1bc25d90ce7f ]
Some system have multiple dw devices. Currently the driver uses a
fixed name for the debugfs dir. Append dev name to the debugfs dir
name to make it unique.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 63c3194b82530bd71fd49db84eb7ab656b8d404a ]
The RESET register only have one self clearing bit and it should not be
cached. If it is cached, when we sync the registers back to the chip we
will initiate a software reset as well, which is not desirable.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2f884e6e688a0deb69e6c9552e51aef8b7e3f5f1 ]
The below call chain generates "scheduling while atomic" backtrace and
causes system crash when Keystone 2 IRQ chip driver is used with RT-kernel:
gic_handle_irq()
|-__handle_domain_irq()
|-generic_handle_irq()
|-keystone_irq_handler()
|-regmap_read()
|-regmap_lock_spinlock()
|-rt_spin_lock()
The reason is that Keystone driver dispatches IRQ using chained IRQ handler
and accesses I/O memory through syscon->regmap(mmio) which is implemented
as fast_io regmap and uses regular spinlocks for synchronization, but
spinlocks transformed to rt_mutexes on RT.
Hence, convert Keystone 2 IRQ driver to use generic irq handler instead of
chained IRQ handler. This way it will be compatible with RT kernel where it
will be forced thread IRQ handler while in non-RT kernel it still will be
executed in HW IRQ context.
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Suman Anna <s-anna@ti.com>
Link: https://lkml.kernel.org/r/20161208233310.10329-1-grygorii.strashko@ti.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
