After the crashdumper runs once, and the user sets the
snapshot_crashdumper sysfs node to 0, it is possible that stale data
is saved off into the snapshot. Check the value of the sysfs node at
the appropriate place to force a re-read of the data through the
legacy path.
Change-Id: Icf27c39b68d786003c33fd0eb22bd3e8b9a036be
Signed-off-by: Lynus Vaz <lvaz@codeaurora.org>
To prevent un-initialized address returning from MHI
state transition lookup table, move mhi_states_transition_str
array out of stack
CRs-Fixed: 2111049
Change-Id: Ife5f907a711cc0c615161f2b2a677275d6773686
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
When using debugfs dev_boot node to trigger firmware download,
debug state should be set as well so that subsequence shutdown
and powerup can be handled correctly.
Change-Id: Id85d28dca104f8938d78655d682a0a7d1491c04c
CRs-fixed: 2059087
Signed-off-by: Yue Ma <yuem@codeaurora.org>
This reverts commit c5616f2f874faa20b59b116177b99bf3948586df.
If we re-init the per-cpu boostgroup spinlock every time that
we add a new boosted cgroup, we can easily wipe out (reinit)
a spinlock struct while in a critical section. We should only
be setting up the per-cpu boostgroup data, and the spin_lock
initialization need only happen once - which we're already
doing in a postcore_initcall.
For example:
-------- CPU 0 -------- | -------- CPU1 --------
cgroupX boost group added |
schedtune_enqueue_task |
acquires(bg->lock) | cgroupY boost group added
| for_each_cpu()
| raw_spin_lock_init(bg->lock)
releases(bg->lock) |
BUG (already unlocked) |
|
This results in the following BUG from the debug spinlock code:
BUG: spinlock already unlocked on CPU#5, rcuop/6/68
CRs-fixed: 2113062
Change-Id: I1cd780d9ba5801cf99bfe46504b18a88e45f17a8
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
Adding capability to read OIS data, provided in the driver
register settings.
CRs-Fixed: 2114654
Change-Id: Ie10b55f597a4daa29267c6d4333ce9d9c7702d63
Signed-off-by: Xu Han <hanxu@codeaurora.org>
Added feature to configure video h/w to send empty output buffer
for skipped frame due to rate control.
Change-Id: Id47344c3bae216fec6384ff205bcb658ec27cb06
Signed-off-by: Shiju Mathew <shijum@codeaurora.org>
Support primary TDM interface dai link and export kcontrols to update
primary TDM interface slot configuration.
CRs-fixed: 2095930
Change-Id: I693b99f295f6476c96d681e10459842c0011467f
Signed-off-by: Cong Tang <congt@codeaurora.org>
Platform driver only forces FW assert for supported devices.
Return proper error code for nonsupported devices so that WLAN
host driver can handle properly.
Change-Id: Iaf88f64564b14425404404db6a7789a7913db74f
CRs-fixed: 2059087
Signed-off-by: Yue Ma <yuem@codeaurora.org>
ION page pool and cma shrinkers return the total pooled
memory instead of the freed. This can result in an early
exit of ION page pool shrinker thus giving back less memory
to the system. For cma shrinker this change doesn't have an
effect since the callers of shrink_slab currently ignores
the return value.
Change-Id: I0b3727807d9a5f020623766d27da360d077395f3
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Sde client customization is disabled by previous commit which
is propagated from other branch. After disabling this, 4K display
on HDMI can not be up. This is because when creating drm plane in kernel,
sde client customization will directly set possible_crtcs per plane
reporting to user space. When disabling it, user space's sdm strategy
could not get and assign correct pipes for 4K display.
Change-Id: Ie6a870c352533060f7c810bdb5c99b7c1534117d
CRs-fixed: 2107328
Signed-off-by: Guchun Chen <guchunc@codeaurora.org>
This patch disables Rx and Tx engine properly while going to suspend or
shutdown. There are chances when BT SOC or client is going bad and
disrupts the UART SW state machine.
1.Do not allow double resource_vote and hence pipe connect at port open.
2.While going to suspend, close the HW resources forcibly to prevent
UART from going bad for the subsequent resume cycle.
3.Stop Rx engine gracefully even if clocks are off to obey the framework.
4.During resource unvote, if runtime PM is disabled then go for forced
suspend.
5.In case of fatal error, stop further IPC logging.
6.Add relevant log if the Rx pipe is not empty at the time disconnecting.
7.Prevent Rx byte entering in case of back to back loopback test, as
this causes data mismatch.
8.Add the logs correctly just after reading the status instead doing it
later which doesn't get logged in case of any failure.
Change-Id: I9426e9ae8c5b07d74e95ec37651ece0d46928104
Signed-off-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
The export of save_stack_trace_tsk() was previously backported to
msm-4.9, without a backported flag to detect support. Define a new
backport flag, so kernel modules can use this function when it is
exported.
Change-Id: Iec65e6f9fed0a9bf686f5e5c8ba4f59691eb1ee0
CRs-Fixed: 2105458
Signed-off-by: Dustin Brown <dustinb@codeaurora.org>
Prevent deadlock between tasklet and delete_stream by stopping
irq during delete_stream.
Change-Id: I4aba47b5cab2722c352139f793b75d7c86cd49d8
CRs-fixed: 2076578
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
Adding new submodule for lased LED and APIs to
support register WRITE/READ operations.
Change-Id: I7e6dc27a01985c223be791b16e6b7da4bbc1be74
Signed-off-by: Vijay kumar Tumati <vtumati@codeaurora.org>
PCIe WAKE for msm8998 is set to pull-down. This configuration
can cause the wake signal to be trigerred in some scenarios.
WAKE gpio should be always pull-up for preventing false wakes.
Change-Id: I893ef8908437d2118238c6fd45809703b1f5e3bb
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Currently, ESR extraction control is configured from two paths.
First is invoked when Qnovo is enabled or disabled. Second is
invoked when the pulse train is done and ESR measurement is
requested. When the latter is run, there is a sleep time of 1.5
seconds that is essential for allowing FG to do ESR measurement.
However in that time window, if Qnovo is disabled for some reason
then ESR extraction control will be kept disabled unexpectedly.
Fix this by protecting both the paths using a mutex lock as well
as checking for qnovo enable status before disabling ESR
extraction control after measuring ESR.
Change-Id: Ib93539071724a1ce59d198074854a8a9c5fd3ab3
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
With support for new AKM suites (example FILS-SHA256), the KEK length
can now be more than NL80211_KEK_LEN and the KCK length can be zero.
Add changes in cfg80211 to specify the length of KEK, and make KCK
optional. Make NL80211_REKEY_DATA_KEK as NLA_BINARY to enforce a maximum
length check.
Also add macro CFG80211_REKEY_DATA_KEK_LEN to indicate support for
including KEK length in rekey data.
CRs-Fixed: 2087759
Change-Id: Ica8dbb8614e0a9c3905e125b4a5254e43821984e
Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org>
During system suspend/resume or WLAN interface up/down
by the network subsystem the ath10k SNOC WLAN driver
configure WLAN enable/disable cmd with the WLAN firmware
over QMI interface. The WLAN enable/disable cmd configuration
with the WLAN firmware during system suspend is preventing
the system suspend.
Register PM event notifier for the ath10k SNOC platform
driver and synchronize the WLAN HIF power down/up
configuration, WLAN enable/disable cmd configuration
with WLAN firmware according to the system power state.
CRs-Fixed: 2110607
Change-Id: I5eeda967ae11c21ab5164c18b3e0a3bf668c916a
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Use NL80211_CMD_UPDATE_CONNECT_PARAMS to update new ERP information,
Association IEs and the Authentication type to driver / firmware which
will be used in subsequent roamings.
CRs-Fixed: 2087764
Change-Id: Ic296b66a39b9ceb8de992a9f37112439389946a2
Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org>
