Correct the right voting for IPA_cfg to reflect
the bus scaling on svs/nominal/turbo modes.
Change-Id: Ieee8276f000c2eb43951e64eee8f07295a351558
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Enable SMMU on IPA3 and put in stage1-bypass mode to
not do the memory mapping.
Change-Id: Id2811c67a423c82201993b3119647a3d4caf4517
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
For the audio get calibration ioctl compare the allocated
buffer size to the size of the header and cal type header
to ensure the buffer is big enough.
Change-Id: I851b4454e8420706ad3263d67e892720d46e5718
Signed-off-by: Ben Romberger <bromberg@codeaurora.org>
FG GEN3 peripheral is present on pmicobalt and it provides the
battery parameters like current, voltage, resistance and
temperature for the clients that depend on them. Add FG GEN3
device on pmicobalt to support that.
Change-Id: I7ebb6a50564abc8e607f688d59690c55c10e2dc9
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
GEN3 FG (fuel gauge) is a new hardware peripheral which cannot
be supported along with existing GEN1/GEN2 FG supported under
qpnp-fg.c. Some of the differences are listed below.
- No conventional memory access for accessing SRAM
- No OTP region for battery profile
- FTRIM registers will be loaded to SRAM
- SRAM partitioning and address format got changed completely
- Battery id detection done by RR_ADC
- Encoding/Decoding changes for battery parameters
Hence add a new driver to support this GEN3 FG. This driver
reads the battery parameters like voltage, current, temperature,
resistance etc. acquired by the FG hardware and expose to the
userspace through a power supply class device.
Change-Id: Ibcd6e49c7dc7c3520527bcf9553296e846fb7458
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
As part of clock test, prepare and unprepare functions are
triggered for all the registered clock's. If clock is
is not used in a flavor of target then pinctrl
pointer is not valid. Hence check for pinctrl before accessing.
CRs-Fixed: 1018208
Change-Id: I3afc0d86476f7a447237180fa411858782d3df1b
Signed-off-by: Yeleswarapu Nagaradhesh <nagaradh@codeaurora.org>
hdcp_library_register API now accepts device type.
Based on the device type passed, hdcp driver would
open the corresponding device session in trusted application.
CRs-Fixed: 1027136
Change-Id: Ia1a72138967a3806253f8431b36af71eaabe816d
Signed-off-by: Shivaprasad Hongal <shongal@codeaurora.org>
Set the default panel for qrd platform as 2k truly panel.
Change-Id: I13034d549833d68941f84fb9639946ecbe7e6107
Signed-off-by: Ingrid Gallardo <ingridg@codeaurora.org>
If we have hit fatal errors and are not able to recover using
a reset, crash the system instead of proceeding and causing
further system failures.
Change-Id: I01820e4e8d3d3b603f16b615ae475095c3a417dd
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
There are events doing probe/remove operations that
shouldn't be swapped. Strict the order by setting
max_active to 1 and adding the WQ_UNBOUND flag.
Change-Id: If65c952622bbaa3f71de6d02c81dbbba5ccead4e
CRs-Fixed: 1046131
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
The global buffers are allocated through cma, which can
be very limited on some targets. Add a flag to allocate
a global buffer through our page allocator.
CRs-Fixed: 1024295
Change-Id: Ie796b03ce152774535f593acdf00e900109d303a
Signed-off-by: Harshdeep Dhatt <hdhatt@codeaurora.org>
on embedded data path, memory leaked on exception
data packets. Free the skb before returning.
Change-Id: I01434ce0b58b5162c8e7aec1d43a7c66a7eaac44
CRs-Fixed: 1037824
Signed-off-by: Sunil Paidimarri <hisunil@codeaurora.org>
Add h264 8x8 transform mode support for Client to
enable or disable it when required.
CRs-Fixed: 1045849
Change-Id: I365a3acd2b3375f093da39e68a98a2a4d35c2287
Signed-off-by: Deepak Kushwah <dkushwah@codeaurora.org>
Add APIs to send and receive vendor defined messages (VDM) over
USB PD. A handler for a standard or vendor ID (SVID) can register
callbacks to be notified of reception of VDM messages. One
use case is for another kernel driver, such as DisplayPort, to be
able to be notified when an Alternate Mode adapter is connected
to the Type-C port in order to enter modal operation. SVID
handlers should maintain their own state and timer resources
in order to comply with the Power Delivery Specification.
Change-Id: Ibe26e6deeca587f21f8121f6f32cf7cc0a5c3e23
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
This allows runtime suspend to kick in upon all the
children of usb device are suspended. It saves power
when usb audio device is connected but not data transfer
is taking place.
CRs-Fixed: 1003807
Change-Id: I227a74c029f10ffda9ceccc10322ad71e7fd0435
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Enable TMC-ETF as the default sink for CoreSight logging.
Change-Id: Ifc867e83746f51abc8d990a334d3f5642efc9c33
Signed-off-by: Satyajit Desai <sadesai@codeaurora.org>
The gdsc_bimc_smmu might take longer than the default time of
100usecs to enable. Add the qcom,gds-timeout property to it
to make this time configurable.
CRs-Fixed: 1045876
Change-Id: I94411718f6715860358b4e8eff9262c4034a5e17
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
When there is a transition between on/off of destination scaling, the
layer mixer and control path width/height parameters need to be updated
accordingly from the user space. Scaling coefficients and detail
enhancer parameters update should not affect the LM width/height.
CRs-Fixed: 1035873
Change-Id: Ieb6668a1cedd53a17d2cbc13f40a8463c0280769
Signed-off-by: Benjamin Chan <bkchan@codeaurora.org>
Using 1 millisecond Rx polling sleep makes the cpu wake up too often,
results in more power consumption.
Using 3 milliseconds is helping on MSM8940 in terms of both
power and performance. Give provision to change the polling time via
device tree entry and use 3 milliseconds for MSM8940.
And also give provision to modify the rx polling timeout via
debugfs entry for testing purposes.
Change-Id: I88de436b29c3000dcebeec4da607dff42d0609fe
Acked-by: Mohammad Javid <mjavid@qti.qualcomm.com>
Signed-off-by: Utkarsh Saxena <usaxena@codeaurora.org>
This is the initial commit from thirt party project.
Git-commit: bedea8a0819fc95acd0222e21e61203c8a08bb16
Git-repo: https://github.com/synaptics-touch/synaptics-dsx-i2c/
Change-Id: I892bc03122b096b43fc7f6b757b1161470597ddb
Signed-off-by: Alexandra Chin <alexandra.chin@tw.synaptics.com>
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
(cherry picked from commit 7d4470e29ce77e62acc14a21210e88207e4692b5)
* msm-4.4/tmp-2bf7955:
Linux 4.4.8
Revert "usb: hub: do not clear BOS field during reset device"
usbvision: fix crash on detecting device with invalid configuration
staging: android: ion: Set the length of the DMA sg entries in buffer
Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"
Revert "PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"
Revert "x86/PCI: Don't alloc pcibios-irq when MSI is enabled"
HID: usbhid: fix inconsistent reset/resume/reset-resume behavior
HID: wacom: fix Bamboo ONE oops
ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock
ALSA: usb-audio: Add a quirk for Plantronics BT300
ALSA: usb-audio: Add a sample rate quirk for Phoenix Audio TMX320
ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T460s
ALSA: hda - fix front mic problem for a HP desktop
ALSA: hda - Fix headset support and noise on HP EliteBook 755 G2
ALSA: hda - Fixup speaker pass-through control for nid 0x14 on ALC225
mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers
perf: Cure event->pending_disable race
perf: Do not double free
arm64: replace read_lock to rcu lock in call_step_hook
Btrfs: fix file/data loss caused by fsync after rename and new inode
iommu: Don't overwrite domain pointer when there is no default_domain
ext4: ignore quota mount options if the quota feature is enabled
ext4: add lockdep annotations for i_data_sem
btrfs: fix crash/invalid memory access on fsync when using overlayfs
nfs: use file_dentry()
fs: add file_dentry()
sd: Fix excessive capacity printing on devices with blocks bigger than 512 bytes
iio: gyro: bmg160: fix endianness when reading axes
iio: gyro: bmg160: fix buffer read values
iio: accel: bmc150: fix endianness when reading axes
iio: st_magn: always define ST_MAGN_TRIGGER_SET_STATE
usb: renesas_usbhs: fix to avoid using a disabled ep in usbhsg_queue_done()
usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transfer
usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler()
mac80211: fix txq queue related crashes
mac80211: fix unnecessary frame drops in mesh fwding
mac80211: fix ibss scan parameters
mac80211: avoid excessive stack usage in sta_info
mac80211: properly deal with station hashtable insert errors
virtio: virtio 1.0 cs04 spec compliance for reset
rbd: use GFP_NOIO consistently for request allocations
pcmcia: db1xxx_ss: fix last irq_to_gpio user
v4l: vsp1: Set the SRU CTRL0 register when starting the stream
coda: fix error path in case of missing pdata on non-DT platform
au0828: Fix dev_state handling
au0828: fix au0828_v4l2_close() dev_state race condition
pinctrl: freescale: imx: fix bogus check of of_iomap() return value
pinctrl: nomadik: fix pull debug print inversion
pinctrl: sunxi: Fix A33 external interrupts not working
pinctrl: sh-pfc: only use dummy states for non-DT platforms
pinctrl: pistachio: fix mfio84-89 function description and pinmux.
MIPS: Fix MSA ld unaligned failure cases
KVM: x86: reduce default value of halt_poll_ns parameter
KVM: x86: Inject pending interrupt even if pending nmi exist
cdc-acm: fix NULL pointer reference
USB: uas: Add a new NO_REPORT_LUNS quirk
USB: uas: Limit qdepth at the scsi-host level
mpls: find_outdev: check for err ptr in addition to NULL check
ipv6: Count in extension headers in skb->network_header
ip6_tunnel: set rtnl_link_ops before calling register_netdevice
ipv6: l2tp: fix a potential issue in l2tp_ip6_recv
ipv4: l2tp: fix a potential issue in l2tp_ip_recv
tuntap: restore default qdisc
tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter
rtnl: fix msg size calculation in if_nlmsg_size()
bridge: Allow set bridge ageing time when switchdev disabled
ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates
qmi_wwan: add "D-Link DWM-221 B1" device id
xfrm: Fix crash observed during device unregistration and decryption
ppp: take reference on channels netns
ipv4: initialize flowi4_flags before calling fib_lookup()
ipv4: fix broadcast packets reception
bonding: fix bond_get_stats()
net: bcmgenet: fix dma api length mismatch
qlge: Fix receive packets drop.
tcp/dccp: remove obsolete WARN_ON() in icmp handlers
ppp: ensure file->private_data can't be overridden
ath9k: fix buffer overrun for ar9287
farsync: fix off-by-one bug in fst_add_one
mlx4: add missing braces in verify_qp_parameters
net: Fix use after free in the recvmmsg exit path
ipv4: Don't do expensive useless work during inetdev destroy.
bridge: allow zero ageing time
rocker: set FDB cleanup timer according to lowest ageing time
mlxsw: spectrum: Check requested ageing time is valid
macvtap: always pass ethernet header in linear
qlcnic: Fix mailbox completion handling during spurious interrupt
qlcnic: Remove unnecessary usage of atomic_t
sh_eth: advance 'rxdesc' later in sh_eth_ring_format()
sh_eth: fix NULL pointer dereference in sh_eth_ring_format()
bpf: avoid copying junk bytes in bpf_get_current_comm()
packet: validate variable length ll headers
ax25: add link layer header validation function
net: validate variable length ll headers
ppp: release rtnl mutex when interface creation fails
tcp: fix tcpi_segs_in after connection establishment
udp6: fix UDP/IPv6 encap resubmit path
usbnet: cleanup after bind() in probe()
cdc_ncm: toggle altsetting to force reset before setup
vxlan: fix missing options_len update on RX with collect metadata
ipv6: re-enable fragment header matching in ipv6_find_hdr
qmi_wwan: add Sierra Wireless EM74xx device ID
tipc: Revert "tipc: use existing sk_write_queue for outgoing packet chain"
mld, igmp: Fix reserved tailroom calculation
sctp: lack the check for ports in sctp_v6_cmp_addr
net: fix bridge multicast packet checksum validation
net: qca_spi: clear IFF_TX_SKB_SHARING
net: qca_spi: Don't clear IFF_BROADCAST
net: vrf: Remove direct access to skb->data
net: jme: fix suspend/resume on JMC260
ipv4: only create late gso-skb if skb is already set up with CHECKSUM_PARTIAL
tunnel: Clear IPCB(skb)->opt before dst_link_failure called
tcp: convert cached rtt from usec to jiffies when feeding initial rto
xen/events: Mask a moving irq
drm/amdgpu/gmc: use proper register for vram type on Fiji
drm/amdgpu/gmc: move vram type fetching into sw_init
drm/radeon: add a dpm quirk for all R7 370 parts
drm/radeon: add another R7 370 quirk
drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2G D5
drm/udl: Use unlocked gem unreferencing
drm/dp: move hw_mutex up the call stack
arm64: opcodes.h: Add arm big-endian config options before including arm header
compiler-gcc: disable -ftracer for __noclone functions
libnvdimm, pfn: fix uuid validation
libnvdimm: fix smart data retrieval
powerpc/mm: Fixup preempt underflow with huge pages
mm: fix invalid node in alloc_migrate_target()
ALSA: hda - Apply fix for white noise on Asus N550JV, too
ALSA: hda - Fix white noise on Asus N750JV headphone
ALSA: hda - Asus N750JV external subwoofer fixup
ALSA: timer: Use mod_timer() for rearming the system timer
parisc: Unbreak handling exceptions from kernel modules
parisc: Fix kernel crash with reversed copy_from_user()
parisc: Avoid function pointers for kernel exception routines
PKCS#7: pkcs7_validate_trust(): initialize the _trusted output argument
hwmon: (max1111) Return -ENODEV from max1111_read_channel if not instantiated
Linux 4.4.7
perf/x86/intel: Fix PEBS data source interpretation on Nehalem/Westmere
perf/x86/intel: Use PAGE_SIZE for PEBS buffer size on Core2
perf/x86/intel: Fix PEBS warning by only restoring active PMU in pmi
perf/x86/pebs: Add workaround for broken OVFL status on HSW+
sched/cputime: Fix steal time accounting vs. CPU hotplug
scsi_common: do not clobber fixed sense information
PM / sleep: Clear pm_suspend_global_flags upon hibernate
intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
mtd: onenand: fix deadlock in onenand_block_markbad
mm/page_alloc: prevent merging between isolated and other pageblocks
ocfs2/dlm: fix BUG in dlm_move_lockres_to_recovery_list
ocfs2/dlm: fix race between convert and recovery
Input: ati_remote2 - fix crashes on detecting device with invalid descriptor
Input: ims-pcu - sanity check against missing interfaces
Input: synaptics - handle spurious release of trackstick buttons, again
writeback, cgroup: fix use of the wrong bdi_writeback which mismatches the inode
writeback, cgroup: fix premature wb_put() in locked_inode_to_wb_and_lock_list()
ACPI / PM: Runtime resume devices when waking from hibernate
ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator
ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator
nfsd: fix deadlock secinfo+readdir compound
nfsd4: fix bad bounds checking
iser-target: Rework connection termination
iser-target: Separate flows for np listeners and connections cma events
iser-target: Add new state ISER_CONN_BOUND to isert_conn
iser-target: Fix identification of login rx descriptor type
target: Fix target_release_cmd_kref shutdown comp leak
clk: bcm2835: Fix setting of PLL divider clock rates
clk: rockchip: add hclk_cpubus to the list of rk3188 critical clocks
clk: rockchip: rk3368: fix hdmi_cec gate-register
clk: rockchip: rk3368: fix parents of video encoder/decoder
clk: rockchip: rk3368: fix cpuclk core dividers
clk: rockchip: rk3368: fix cpuclk mux bit of big cpu-cluster
mmc: sdhci: Fix override of timeout clk wrt max_busy_timeout
mmc: sdhci: fix data timeout (part 2)
mmc: sdhci: fix data timeout (part 1)
mmc: mmc_spi: Add Card Detect comments and fix CD GPIO case
mmc: block: fix ABI regression of mmc_blk_ioctl
ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list
MAINTAINERS: Update mailing list and web page for hwmon subsystem
kbuild/mkspec: fix grub2 installkernel issue
scripts/kconfig: allow building with make 3.80 again
scripts/coccinelle: modernize &
bitops: Do not default to __clear_bit() for __clear_bit_unlock()
tracing: Fix trace_printk() to print when not using bprintk()
tracing: Fix crash from reading trace_pipe with sendfile
tracing: Have preempt(irqs)off trace preempt disabled functions
IB/ipoib: fix for rare multicast join race condition
drm/amdgpu: include the right version of gmc header files for iceland
drm/amdgpu: disable runtime pm on PX laptops without dGPU power control
drm/radeon: Don't drop DP 2.7 Ghz link setup on some cards.
drm/radeon: disable runtime pm on PX laptops without dGPU power control
iwlwifi: mvm: Fix paging memory leak
ipr: Fix regression when loading firmware
ipr: Fix out-of-bounds null overwrite
rapidio/rionet: fix deadlock on SMP
fs/coredump: prevent fsuid=0 dumps into user-controlled directories
fuse: Add reference counting for fuse_io_priv
fuse: do not use iocb after it may have been freed
md: multipath: don't hardcopy bio in .make_request path
md/raid5: preserve STRIPE_PREREAD_ACTIVE in break_stripe_batch_list
raid10: include bio_end_io_list in nr_queued to prevent freeze_array hang
RAID5: revert e9e4c377e2 to fix a livelock
RAID5: check_reshape() shouldn't call mddev_suspend
md/raid5: Compare apples to apples (or sectors to sectors)
raid1: include bio_end_io_list in nr_queued to prevent freeze_array hang
xfs: fix two memory leaks in xfs_attr_list.c error paths
quota: Fix possible GPF due to uninitialised pointers
ARC: bitops: Remove non relevant comments
ARC: [BE] readl()/writel() to work in Big Endian CPU configuration
xtensa: clear all DBREAKC registers on start
xtensa: fix preemption in {clear,copy}_user_highpage
xtensa: ISS: don't hang if stdin EOF is reached
splice: handle zero nr_pages in splice_to_pipe()
vfs: show_vfsstat: do not ignore errors from show_devname method
of: alloc anywhere from memblock if range not specified
net: mvneta: enable change MAC address when interface is up
cgroup: ignore css_sets associated with dead cgroups during migration
Bluetooth: Fix potential buffer overflow with Add Advertising
Bluetooth: Add new AR3012 ID 0489:e095
watchdog: rc32434_wdt: fix ioctl error handling
watchdog: don't run proc_watchdog_update if new value is same as old
ia64: define ioremap_uc()
mm: memcontrol: reclaim and OOM kill when shrinking memory.max below usage
mm: memcontrol: reclaim when shrinking memory.high below usage
bcache: fix cache_set_flush() NULL pointer dereference on OOM
bcache: fix race of writeback thread starting before complete initialization
bcache: cleaned up error handling around register_cache()
IB/srpt: Simplify srpt_handle_tsk_mgmt()
brd: Fix discard request processing
jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount path
tools/hv: Use include/uapi with __EXPORTED_HEADERS__
ALSA: hda - Fix unconditional GPIO toggle via automute
ALSA: hda - fix the mic mute button and led problem for a Lenovo AIO
ALSA: hda - Don't handle ELD notify from invalid port
ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41.
ALSA: pcm: Avoid "BUG:" string for warnings again
ALSA: hda - Apply reboot D3 fix for CX20724 codec, too
mtip32xx: Cleanup queued requests after surprise removal
mtip32xx: Implement timeout handler
mtip32xx: Handle FTL rebuild failure state during device initialization
mtip32xx: Handle safe removal during IO
mtip32xx: Fix for rmmod crash when drive is in FTL rebuild
mtip32xx: Print exact time when an internal command is interrupted
mtip32xx: Remove unwanted code from taskfile error handler
mtip32xx: Fix broken service thread handling
mtip32xx: Avoid issuing standby immediate cmd during FTL rebuild
media: v4l2-compat-ioctl32: fix missing length copy in put_v4l2_buffer32
coda: fix first encoded frame payload
bttv: Width must be a multiple of 16 when capturing planar formats
adv7511: TX_EDID_PRESENT is still 1 after a disconnect
saa7134: Fix bytesperline not being set correctly for planar formats
8250: use callbacks to access UART_DLL/UART_DLM
net: irda: Fix use-after-free in irtty_open()
tty: Fix GPF in flush_to_ldisc(), part 2
staging: comedi: ni_mio_common: fix the ni_write[blw]() functions
staging: android: ion_test: fix check of platform_device_register_simple() error code
staging: comedi: ni_tiocmd: change mistaken use of start_src for start_arg
HID: fix hid_ignore_special_drivers module parameter
HID: multitouch: force retrieving of Win8 signature blob
HID: i2c-hid: fix OOB write in i2c_hid_set_or_send_report()
HID: logitech: fix Dual Action gamepad support
tpm: fix the cleanup of struct tpm_chip
tpm_eventlog.c: fix binary_bios_measurements
tpm_crb: tpm2_shutdown() must be called before tpm_chip_unregister()
tpm: fix the rollback in tpm_chip_register()
mei: bus: check if the device is enabled before data transfer
X.509: Fix leap year handling again
crypto: marvell/cesa - forward devm_ioremap_resource() error code
crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
crypto: keywrap - memzero the correct memory
crypto: ccp - memset request context to zero during import
crypto: ccp - Don't assume export/import areas are aligned
crypto: ccp - Limit the amount of information exported
crypto: ccp - Add hash state import and export support
Bluetooth: btusb: Add a new AR3012 ID 13d3:3472
Bluetooth: btusb: Add a new AR3012 ID 04ca:3014
Bluetooth: btusb: Add new AR3012 ID 13d3:3395
ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call
ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk()
ALSA: usb-audio: add Microsoft HD-5001 to quirks
ALSA: usb-audio: Add sanity checks for endpoint accesses
ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk()
Input: powermate - fix oops with malicious USB descriptors
pwc: Add USB id for Philips Spc880nc webcam
USB: option: add "D-Link DWM-221 B1" device id
USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devices
USB: serial: cp210x: Adding GE Healthcare Device ID
USB: cypress_m8: add endpoint sanity check
USB: digi_acceleport: do sanity checking for the number of ports
USB: mct_u232: add sanity checking in probe
USB: usb_driver_claim_interface: add sanity checking
USB: iowarrior: fix oops with malicious USB descriptors
USB: cdc-acm: more sanity checking
USB: uas: Reduce can_queue to MAX_CMNDS
usb: hub: fix a typo in hub_port_init() leading to wrong logic
usb: retry reset if a device times out
dm: fix rq_end_stats() NULL pointer in dm_requeue_original_request()
dm cache: make sure every metadata function checks fail_io
dm thin metadata: don't issue prefetches if a transaction abort has failed
dm: fix excessive dm-mq context switching
dm snapshot: disallow the COW and origin devices from being identical
libnvdimm: Fix security issue with DSM IOCTL.
aic7xxx: Fix queue depth handling
be2iscsi: set the boot_kset pointer to NULL in case of failure
scsi: storvsc: fix SRB_STATUS_ABORTED handling
sd: Fix discard granularity when LBPRZ=1
aacraid: Set correct msix count for EEH recovery
aacraid: Fix memory leak in aac_fib_map_free
aacraid: Fix RRQ overload
sg: fix dxferp in from_to case
x86/mm: TLB_REMOTE_SEND_IPI should count pages
x86/iopl: Fix iopl capability check on Xen PV
x86/iopl/64: Properly context-switch IOPL on Xen PV
x86/apic: Fix suspicious RCU usage in smp_trace_call_function_interrupt()
x86/irq: Cure live lock in fixup_irqs()
PCI: ACPI: IA64: fix IO port generic range check
PCI: Disable IO/MEM decoding for devices with non-compliant BARs
pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsing
s390/pci: enforce fmb page boundary rule
s390/cpumf: add missing lpp magic initialization
s390: fix floating pointer register corruption (again)
EDAC, amd64_edac: Shift wrapping issue in f1x_get_norm_dct_addr()
EDAC/sb_edac: Fix computation of channel address
sched/preempt, sh: kmap_coherent relies on disabled preemption
sched/cputime: Fix steal_account_process_tick() to always return jiffies
Thermal: Ignore invalid trip points
perf tools: Fix python extension build
perf tools: Fix checking asprintf return value
perf tools: Dont stop PMU parsing on alias parse error
perf/core: Fix perf_sched_count derailment
KVM: VMX: fix nested vpid for old KVM guests
KVM: VMX: avoid guest hang on invalid invvpid instruction
KVM: VMX: avoid guest hang on invalid invept instruction
KVM: fix spin_lock_init order on x86
KVM: i8254: change PIT discard tick policy
KVM: x86: fix missed hardware breakpoints
x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs
perf/x86/intel: Add definition for PT PMI bit
x86/entry/compat: Keep TS_COMPAT set during signal delivery
x86/microcode: Untangle from BLK_DEV_INITRD
x86/microcode/intel: Make early loader look for builtin microcode too
mmc: sh_mmcif: Correct TX DMA channel allocation
mmc: sh_mmcif: rework dma channel handling
ASoC: samsung: pass DMA channels as pointers
regulator: core: Fix nested locking of supplies
regulator: core: avoid unused variable warning
s390/cpumf: Fix lpp detection
cpufreq: dt: No need to allocate resources anymore
cpufreq: dt: No need to fetch voltage-tolerance
cpufreq: dt: Use dev_pm_opp_set_rate() to switch frequency
cpufreq: dt: Reuse dev_pm_opp_get_max_transition_latency()
cpufreq: dt: Unsupported OPPs are already disabled
cpufreq: dt: Pass regulator name to the OPP core
cpufreq: dt: OPP layers handles clock-latency for V1 bindings as well
cpufreq: dt: Rename 'need_update' to 'opp_v1'
cpufreq: dt: Convert few pr_debug/err() calls to dev_dbg/err()
cpufreq-dt: fix handling regulator_get_voltage() result
cpufreq-dt: Supply power coefficient when registering cooling devices
PM / OPP: Rename structures for clarity
PM / OPP: Fix incorrect comments
PM / OPP: Initialize regulator pointer to an error value
PM / OPP: Initialize u_volt_min/max to a valid value
PM / OPP: Fix NULL pointer dereference crash when disabling OPPs
PM / OPP: Add dev_pm_opp_set_rate()
PM / OPP: Manage device clk
PM / OPP: Parse clock-latency and voltage-tolerance for v1 bindings
PM / OPP: Introduce dev_pm_opp_get_max_transition_latency()
PM / OPP: Introduce dev_pm_opp_get_max_volt_latency()
PM / OPP: Disable OPPs that aren't supported by the regulator
PM / OPP: get/put regulators from OPP core
cpufreq: cpufreq-dt: avoid uninitialized variable warnings:
PM / OPP: Use snprintf() instead of sprintf()
PM / OPP: Set cpu_dev->id in cpumask first
PM / OPP: Fix parsing of opp-microvolt and opp-microamp properties
PM / OPP: Parse 'opp-<prop>-<name>' bindings
PM / OPP: Parse 'opp-supported-hw' binding
PM / OPP: Add missing doc comments
PM / OPP: Rename OPP nodes as opp@<opp-hz>
PM / OPP: Remove 'operating-points-names' binding
PM / OPP: Add {opp-microvolt|opp-microamp}-<name> binding
PM / OPP: Add "opp-supported-hw" binding
PM / OPP: Add debugfs support
arm64: vdso: Mark vDSO code as read-only
Conflicts:
drivers/staging/android/ion/ion.c
mm/page_alloc.c
CRs-Fixed: 1010239
Change-Id: Id59539cad642885e1e41340cebae4159ba1f7eaf
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
Make get_service_location() asynchronous, which was a blocking call
before. This also means every client will have it's own thread and
doesn't need to create thread on their end.
CRs-Fixed: 1045353
Change-Id: Ibcccf56d41779b808d1835f62969e3c9365939e8
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
To minimize spinlock, the qce50 client is assumed that it can only issue
request to qce50 driver one at a time. After a request is issued to
qce50 from qcrypto. Without waiting for completion, other requests can
still be issued until the maximum limit of outstanding requests
in qce50 reaches.
To cut down the chance of udp socket receive buffer overflow the following
schemes are provided -
The number of bunched requests in qce50 is based on the data length of
the current request to cut down delay for smaller packets. In turn,
with smaller delay, the number of completed requests to process in
seq_response() completion function is less.
The scheduling of qcrypto requests are changed from least use to
round robin. This way, the distribution of requests to each engine
is more even. As the result, reordering of completed requests will
be less. Completed requests to handle in completion callback is less
at a time.
Change-Id: I723bac2f9427cddb5248101c9ac3f2b595ad0379
Acked-by: Che-Min Hsieh <cheminh@qti.qualcomm.com>
Signed-off-by: Sivanesan Rajapupathi <srajap@codeaurora.org>
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Enable EOB event notification from GSI in order to receive completion
events on partial packets, which are split to multiple buffers.
This change is fixing few bugs in the handling of such a scenario.
CRs-Fixed: 1043511
Change-Id: I830dba8f4e47e3383b09639416fc704caa94cdf2
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Add active and sleep sets for the DP Aux input lanes, HPD and
the USB-type-C orientation detection GPIO.
These GPIOs are needed to enable display on the DP interface.
Change-Id: I4d743246dfe74a80ecce283b6056baf153e588f9
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Build kryo-l2-accessors only for MSM8996. This will avoid
compilation errors while building for 32-bit.
Change-Id: I3433623797abbefc5f19991c215260d1df11e42a
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Currently on msm-4.4 kernel, MSM8996 clock files are built when
ARCH_QCOM is enabled. Compile 8996 clock files only when
ARCH_MSM8996 is enabled, to avoid any issue when compiling for
other targets.
Change-Id: I58440ae6cf7f02b7137312c38219efeaccf06b58
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
