This change adds the secure context bank child node in mdss
driver, this is required for having both the secure and non-secure
smmu context bank support in the driver. This change also renames
the child nodes to avoid compilation issues on the builds where
fb driver mdss device file is also present. As a part of this
change the smmu driver registration is called as a part of
msm driver probe.
CRs-Fixed: 2053654
Change-Id: I90cd31fd792b0fd9772689dc6561bb0b429e1e3a
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
64K page pool is currently unused because it doesn't have
any reserved pages and also dynamic page allocation for
this pool is disabled.
Add qcom,mempool-allocate property to allow pool to grow
dynamically and hence being used.
Change-Id: Ie7c41939f45af58ca1ac7a8f07ea29605aced798
Signed-off-by: Deepak Kumar <dkumar@codeaurora.org>
Enable secondary USB port for HDK660 platform which use
host only mode.
Remove TCSR_QUSB2_PHY_CLAMP_DIG_N_1P8 resource entry for SDM660
which is not required to set now during disconnect as writing to this
register causes USB3.0 port and USB2.0 ports working independently.
Change-Id: I936a4012c30e0cd84144b12e34fb780cada541ae
Signed-off-by: Liangliang Lu <luliang@codeaurora.org>
Mhi node needs additional information for driver
probe to get success. This generic node is not
required and hence disable unwanted dtsi node for
msm8996.
Change-Id: I4dffd3d668ac065fc800e5e7d3b52fdf2733e03f
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
Update CCI voltage regulator voltage range to reflect the
corresponding change in pm8996_l17 on MSM8996pro.
CRs-Fixed: 1047744
Change-Id: I96c2070841b044f3ddfd19cad47f3cbc38452b6d
Signed-off-by: Shiju Mathew <shijum@codeaurora.org>
This is to support CVBS video input via adv7481 device on
MSM8996 Automotive.
CRs-Fixed: 1029211
Change-Id: I15ada5b7d69ad0759f0d4025a575598909548b7a
Signed-off-by: Shiju Mathew <shijum@codeaurora.org>
Add voltage regulator configuration support for
adv7481 CCI on MSM8996 Mojave platform.
CRs-Fixed: 1021381
Change-Id: I9194d7b3b4f73afcfa37779ed4266e71b1876f56
Signed-off-by: Shiju Mathew <shijum@codeaurora.org>
Add platform specific data for bridge abstraction
driver on MSM8996 auto.
CRs-Fixed: 998927
Change-Id: Ib354ce35acc69d0d636c68b29a9d59956f8ff55b
Signed-off-by: Shiju Mathew <shijum@codeaurora.org>
Create bridge abstraction driver to provide a framework that can be
used to abstract different types of bridge chips under a common API.
The framework also allows multiple drivers to control different
functional aspects of a bridge chip.
The bridge abstraction driver is limited to bridge chips that deal
with converting audio/video data from one protocol to a different one.
Change-Id: Ib42365fb41afda8029f4f6e9b1ec27549d885659
Signed-off-by: Domi Papoi <dpapoi@codeaurora.org>
Specify a 2 A PWM vs AUTO mode load current threshold for the
BoB regulator. Also specify the initial mode as AUTO.
Consumer that require the BoB to be in PWM mode should request
2000000 uA or more.
CRs-Fixed: 2054771
Change-Id: I2d2687a9b2204f677818b639fb6650084cffd84a
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
The panel used for msm8998 SKUK HDK is a special panel, brightness needs
to be sent with HS state to ensure that can be received successfully.
Change-Id: I4c0c13002de01aaea9e66e6cc011761234318a76
Signed-off-by: Yahui Wang <yahuiw@codeaurora.org>
Ensuring the CB size to be 128MB aligned, the bitmap will be page
aligned i.e a 4k bitmap page can represent 4*1024*8 4k page i.e
128MB memory. Hence a 128MB aligned memory will always have bitmap
at page boundary.
Change-Id: I42e07e5b6b7a8a03e4c3abd2a37f5b1c7de15669
Signed-off-by: Deepak Kushwah <dkushwah@codeaurora.org>
Add vmem clock config entries to msm8996 vmem device to fix
vmem probe failure. This will allow venus to use vmem that will
improve video usecase performance.
CRs-Fixed: 2044371
Change-Id: Id7f2797b12d93ef6d4a55cf50babdd25214747ee
Signed-off-by: Shiju Mathew <shijum@codeaurora.org>
* refs/heads/tmp-9bc4622:
Linux 4.4.70
drivers: char: mem: Check for address space wraparound with mmap()
nfsd: encoders mustn't use unitialized values in error cases
drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2
PCI: Freeze PME scan before suspending devices
PCI: Fix pci_mmap_fits() for HAVE_PCI_RESOURCE_TO_USER platforms
tracing/kprobes: Enforce kprobes teardown after testing
osf_wait4(): fix infoleak
genirq: Fix chained interrupt data ordering
uwb: fix device quirk on big-endian hosts
metag/uaccess: Check access_ok in strncpy_from_user
metag/uaccess: Fix access_ok()
iommu/vt-d: Flush the IOTLB to get rid of the initial kdump mappings
staging: rtl8192e: rtl92e_get_eeprom_size Fix read size of EPROM_CMD.
staging: rtl8192e: fix 2 byte alignment of register BSSIDR.
mm/huge_memory.c: respect FOLL_FORCE/FOLL_COW for thp
xc2028: Fix use-after-free bug properly
arm64: documentation: document tagged pointer stack constraints
arm64: uaccess: ensure extension of access_ok() addr
arm64: xchg: hazard against entire exchange variable
ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
ARM: dts: at91: sama5d3_xplained: fix ADC vref
powerpc/64e: Fix hang when debugging programs with relocated kernel
powerpc/pseries: Fix of_node_put() underflow during DLPAR remove
powerpc/book3s/mce: Move add_taint() later in virtual mode
cx231xx-cards: fix NULL-deref at probe
cx231xx-audio: fix NULL-deref at probe
cx231xx-audio: fix init error path
dvb-frontends/cxd2841er: define symbol_rate_min/max in T/C fe-ops
zr364xx: enforce minimum size when reading header
dib0700: fix NULL-deref at probe
s5p-mfc: Fix unbalanced call to clock management
gspca: konica: add missing endpoint sanity check
ceph: fix recursion between ceph_set_acl() and __ceph_setattr()
iio: proximity: as3935: fix as3935_write
ipx: call ipxitf_put() in ioctl error path
USB: hub: fix non-SS hub-descriptor handling
USB: hub: fix SS hub-descriptor handling
USB: serial: io_ti: fix div-by-zero in set_termios
USB: serial: mct_u232: fix big-endian baud-rate handling
USB: serial: qcserial: add more Lenovo EM74xx device IDs
usb: serial: option: add Telit ME910 support
USB: iowarrior: fix info ioctl on big-endian hosts
usb: musb: tusb6010_omap: Do not reset the other direction's packet size
ttusb2: limit messages to buffer size
mceusb: fix NULL-deref at probe
usbvision: fix NULL-deref at probe
net: irda: irda-usb: fix firmware name on big-endian hosts
usb: host: xhci-mem: allocate zeroed Scratchpad Buffer
xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton
usb: host: xhci-plat: propagate return value of platform_get_irq()
sched/fair: Initialize throttle_count for new task-groups lazily
sched/fair: Do not announce throttled next buddy in dequeue_task_fair()
fscrypt: avoid collisions when presenting long encrypted filenames
f2fs: check entire encrypted bigname when finding a dentry
fscrypt: fix context consistency check when key(s) unavailable
net: qmi_wwan: Add SIMCom 7230E
ext4 crypto: fix some error handling
ext4 crypto: don't let data integrity writebacks fail with ENOMEM
USB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDs
USB: serial: ftdi_sio: fix setting latency for unprivileged users
pid_ns: Fix race between setns'ed fork() and zap_pid_ns_processes()
pid_ns: Sleep in TASK_INTERRUPTIBLE in zap_pid_ns_processes
iio: dac: ad7303: fix channel description
of: fix sparse warning in of_pci_range_parser_one
proc: Fix unbalanced hard link numbers
cdc-acm: fix possible invalid access when processing notification
drm/nouveau/tmr: handle races with hw when updating the next alarm time
drm/nouveau/tmr: avoid processing completed alarms when adding a new one
drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm
drm/nouveau/tmr: ack interrupt before processing alarms
drm/nouveau/therm: remove ineffective workarounds for alarm bugs
drm/amdgpu: Make display watermark calculations more accurate
drm/amdgpu: Avoid overflows/divide-by-zero in latency_watermark calculations.
ath9k_htc: fix NULL-deref at probe
ath9k_htc: Add support of AirTies 1eda:2315 AR9271 device
s390/cputime: fix incorrect system time
s390/kdump: Add final note
regulator: tps65023: Fix inverted core enable logic.
KVM: X86: Fix read out-of-bounds vulnerability in kvm pio emulation
KVM: x86: Fix load damaged SSEx MXCSR register
ima: accept previously set IMA_NEW_FILE
mwifiex: pcie: fix cmd_buf use-after-free in remove/reset
rtlwifi: rtl8821ae: setup 8812ae RFE according to device type
md: update slab_cache before releasing new stripes when stripes resizing
dm space map disk: fix some book keeping in the disk space map
dm thin metadata: call precommit before saving the roots
dm bufio: make the parameter "retain_bytes" unsigned long
dm cache metadata: fail operations if fail_io mode has been established
dm bufio: check new buffer allocation watermark every 30 seconds
dm bufio: avoid a possible ABBA deadlock
dm raid: select the Kconfig option CONFIG_MD_RAID0
dm btree: fix for dm_btree_find_lowest_key()
infiniband: call ipv6 route lookup via the stub interface
tpm_crb: check for bad response size
ARM: tegra: paz00: Mark panel regulator as enabled on boot
USB: core: replace %p with %pK
char: lp: fix possible integer overflow in lp_setup()
watchdog: pcwd_usb: fix NULL-deref at probe
USB: ene_usb6250: fix DMA to the stack
usb: misc: legousbtower: Fix memory leak
usb: misc: legousbtower: Fix buffers on stack
ANDROID: uid_sys_stats: defer io stats calulation for dead tasks
ANDROID: AVB: Fix linter errors.
ANDROID: AVB: Fix invalidate_vbmeta_submit().
ANDROID: sdcardfs: Check for NULL in revalidate
Linux 4.4.69
ipmi: Fix kernel panic at ipmi_ssif_thread()
wlcore: Add RX_BA_WIN_SIZE_CHANGE_EVENT event
wlcore: Pass win_size taken from ieee80211_sta to FW
mac80211: RX BA support for sta max_rx_aggregation_subframes
mac80211: pass block ack session timeout to to driver
mac80211: pass RX aggregation window size to driver
Bluetooth: hci_intel: add missing tty-device sanity check
Bluetooth: hci_bcm: add missing tty-device sanity check
Bluetooth: Fix user channel for 32bit userspace on 64bit kernel
tty: pty: Fix ldisc flush after userspace become aware of the data already
serial: omap: suspend device on probe errors
serial: omap: fix runtime-pm handling on unbind
serial: samsung: Use right device for DMA-mapping calls
arm64: KVM: Fix decoding of Rt/Rt2 when trapping AArch32 CP accesses
padata: free correct variable
CIFS: add misssing SFM mapping for doublequote
cifs: fix CIFS_IOC_GET_MNT_INFO oops
CIFS: fix mapping of SFM_SPACE and SFM_PERIOD
SMB3: Work around mount failure when using SMB3 dialect to Macs
Set unicode flag on cifs echo request to avoid Mac error
fs/block_dev: always invalidate cleancache in invalidate_bdev()
ceph: fix memory leak in __ceph_setxattr()
fs/xattr.c: zero out memory copied to userspace in getxattr
ext4: evict inline data when writing to memory map
IB/mlx4: Reduce SRIOV multicast cleanup warning message to debug level
IB/mlx4: Fix ib device initialization error flow
IB/IPoIB: ibX: failed to create mcg debug file
IB/core: Fix sysfs registration error flow
vfio/type1: Remove locked page accounting workqueue
dm era: save spacemap metadata root after the pre-commit
crypto: algif_aead - Require setkey before accept(2)
block: fix blk_integrity_register to use template's interval_exp if not 0
KVM: arm/arm64: fix races in kvm_psci_vcpu_on
KVM: x86: fix user triggerable warning in kvm_apic_accept_events()
um: Fix PTRACE_POKEUSER on x86_64
x86, pmem: Fix cache flushing for iovec write < 8 bytes
selftests/x86/ldt_gdt_32: Work around a glibc sigaction() bug
x86/boot: Fix BSS corruption/overwrite bug in early x86 kernel startup
usb: hub: Do not attempt to autosuspend disconnected devices
usb: hub: Fix error loop seen after hub communication errors
usb: Make sure usb/phy/of gets built-in
usb: misc: add missing continue in switch
staging: comedi: jr3_pci: cope with jiffies wraparound
staging: comedi: jr3_pci: fix possible null pointer dereference
staging: gdm724x: gdm_mux: fix use-after-free on module unload
staging: vt6656: use off stack for out buffer USB transfers.
staging: vt6656: use off stack for in buffer USB transfers.
USB: Proper handling of Race Condition when two USB class drivers try to call init_usb_class simultaneously
USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit
usb: host: xhci: print correct command ring address
iscsi-target: Set session_fall_back_to_erl0 when forcing reinstatement
target: Convert ACL change queue_depth se_session reference usage
target/fileio: Fix zero-length READ and WRITE handling
target: Fix compare_and_write_callback handling for non GOOD status
xen: adjust early dom0 p2m handling to xen hypervisor behavior
ANDROID: AVB: Only invalidate vbmeta when told to do so.
ANDROID: sdcardfs: Move top to its own struct
ANDROID: lowmemorykiller: account for unevictable pages
ANDROID: usb: gadget: fix NULL pointer issue in mtp_read()
ANDROID: usb: f_mtp: return error code if transfer error in receive_file_work function
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
Conflicts:
drivers/usb/gadget/function/f_mtp.c
fs/ext4/page-io.c
net/mac80211/agg-rx.c
Change-Id: Id65e75bf3bcee4114eb5d00730a9ef2444ad58eb
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
Commit c20c74d49c ("ARM: dts: msm: Remove TCSR_QUSB2_PHY_CLAMP_DIG_N_1P8
for SDM660") is added to remove enabling/disabling clamp during
disconnect/connect. But it is required to enable clamp input to QUSB2PHY,
whenever 0.9V LDO is collapsed. Hence revert the change to add dtsi
property for enable/disable clamp.
Change-Id: I12009bd56d214499a73f7ea3e73d1c979c107ac9
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
With kernel4.4 upgrade, USB probe failed on auto CDP board.
Refer to the adp dts, add this change for solving ADB problem.
Change-Id: I5260826a382d27a78288012ec84cd98fd68f7db9
Signed-off-by: Yimin Peng <yiminp@codeaurora.org>
IOMMU driver takes vote on regulator for every unmap, attach or
detach call and removes it once done.
This is an overhead if GPU is in power collapse mode and huge
number of unmap calls are pending from a given context. It would
end up in turning ON/OFF the regulator those many times.
To optimize this, do a deferred regulator disable about 80ms so that
all subsequent requests to regulator enable will be just refcounted.
Change-Id: I816156f1bdf34a2c0cb8171c2ca1df6b3ae8fe72
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Enable CEC notifier support in CEC adapter driver, so the
adapter could get notification whenever physical address
is available. This removes the requirement for userspace
to manually set physical address.
CRs-Fixed: 2041335
Change-Id: I337c189d625922391374d3cdeb1f2840ad829cd7
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Align partial update roi start and height to 256 pixels
for nt35597 panel.
Change-Id: I56e78d1adab769c4d226d88cfb5badcfe7eb6dc2
Signed-off-by: Animesh Kishore <animeshk@codeaurora.org>
Specify a 2 A PWM vs AUTO mode load current threshold for the
PMI8998 BoB regulator. Also specify the initial mode as AUTO.
Consumer that require the BoB to be in PWM mode should request
2000000 uA or more.
CRs-Fixed: 2054771
Change-Id: Icb6ff634359c8ae12c36dcda127bffa247c6eb71
Signed-off-by: David Collins <collinsd@codeaurora.org>
Neutrino reset GPIO need to be be disabled at bootup.
It will be enabled by driver in its probe.
CRs-Fixed: 1072096
Change-Id: Ie4a0428523b0764e0234f0ae51a90c250166cca9
Signed-off-by: Jaiju Yesudasan <cjaijuy@codeaurora.org>
Add CEC device which provides HDMI CEC support for msm8998.
CEC is a protocol that provides high-level control functions
for the communication between various audiovisual devices.
CRs-Fixed: 2041335
Change-Id: If65798efa28e4b1eaeff5b6fa9b6f92318e7c91f
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
The virtual planes are used to support wider HDMI display. Enable
them on msm8996 auto platforms in order to support 4K HDMI display.
Change-Id: I61bf00975ffac73c37f66dbc47dcc11b31df45df
Signed-off-by: Thomas (Wonyoung) Yun <wyun@codeaurora.org>
Sigdet under low power (LP) mode will use a less accurate local reference
generation, which is expected to have a little more variation than a
precise reference (normal mode). Update PCIe PHY sigdet to use normal
mode instead of LP to increase accuracy and make sigdet more robust.
Change-Id: If9cad9ac9b5a6a736e3af653ac3b3b5e30cfefb4
Signed-off-by: Tony Truong <truong@codeaurora.org>
