Currently the read of battery's voltage_max property (FV) and battery's
current_max property (FCC) returns the value of DEFAULT_VOTER voter.
But such a voter doesn't exist on battery's voltage_max property. Fix it
by returning the value voted by BATT_PROFILE_VOTER.
Change-Id: I2dac98f2ce9a423d5045788dbe120591f10c5a9e
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Currently main charger ends up voting to disable parallel(USBIN_I_VOTER)
if the settled current is less than 1.4Amps. It could be that the
parallel path is drawing some current and the draw is higher than
1.4Amps.
Move this disabling to battery, where the parallel charger's input current
is taken in to consideration.
Also while voting to disable, make sure that the main's input is limited.
If there is more room for ICL to increase that means more power could be
drawn from the charger and so we must keep the parallel charging enabled.
If the ICL ceiling itself if 1.4Amps then disable parallel charging,
because even if ICL has room to increase it wont cross 1.4Amps.
The main's input limited state is set while AICL steps up - this
ensures that we keep parallel disabled while AICL is running and settled
is less than 1.4Amps.
When the charger is removed, the main's input limited status is unset,
however we want to keep the parallel charger disabled. In such situations
the main's settled current is 0mA - use this to vote for disabling
parallel charging.
For any ICL change vote request:
Disable parallel using USBIN_I_VOTER if requested current is less than
1.4Amps and to un-vote (i.e. when ICL vote is higher than 1.4Amps) rely
on event from AICL done or status_change delayed work.
Note that USBIN_I_VOTER is effective only for non-QC chargers. For QC
chargers USBIN_V_VOTER continues to keep charging enabled since parallel
need not be disabled is a lower current is requested with a QC charger.
Change-Id: I61d7cd161a87de2904470b2d870058a0fe199116
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Secure decode doesn't need userptr and uses ion fd instead. We were
conducting userptr validation regardless of the decode mode (secure/
unsecure). This forced user to populate userptr with a dummy value
during QBUF in secure mode decode on both output and capture ports
to avoid a userptr validation fail.
CRs-Fixed: 2049213
Change-Id: I0060efb52792201a2634072f648a537ebb02d17c
Signed-off-by: Prabhakar Reddy Krishnappa <prkrishn@codeaurora.org>
There can be a case of race in the call to tmc_etr_bam_disable(). The call
from usb_notifier() to tmc_etr_bam_disable() is within a lock
'drvdata->mem_lock' but the call from tmc_disable is not under any lock
which can lead to race.
This patch adds the missing lock.
CRs-Fixed: 2047196
Change-Id: I3986b498ae8e2b2ddfe8f5b3315fdefab197d11c
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Fixes compiler warning when a logical-not on a variable
is applied while comparing it with value zero.
Change-Id: I92aa16bd0d57a0d59ecd26eef1ac92220332998d
Signed-off-by: Sudarshan Rajagopalan <sudaraja@codeaurora.org>
When driver calls ops_bus_request with high bandwidth requirement,
affinity of wil6210 interrupt is set to first big core. However this
setting is not cleared when driver lowers bandwidth requirement.
This causes WARN_ON_ONCE(desc->affinity_hint) upon wil6210 rmmod.
Fix this by clearing affinity hint upon low bandwidth request.
Change-Id: I87b6b7ec9b369b84a9d3724d92a821a1302d1f83
Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Update HDMI drift mixer controls name to be aligned with
drift mixer controls for other devices(speaker, BT).
CRs-Fixed: 2036899
Change-Id: If7aa29ea9511b65de71ff12143a1c34d977de2b8
Signed-off-by: Manish Dewangan <manish@codeaurora.org>
Initialize mutex before using in irq handler.
CRs-fixed: 2047720
Change-Id: I5ebfbc22f2a64dde239fcbb13eb26be50543b484
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
CONFIG_TIMER_STATS is no longer needed and the kconfig option
will be removed in subsequent commits.
Change-Id: I380f9f925332c594c9d500312a06713170e48505
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
The specific voltage levels for the vdda33 regulator may vary
depending on the target. Add an optional device tree property to
allow specifying a 3-tuple of voltages for minimum, operating
and maximum voltage levels. The minimum level is used when simply
powering on, whereas the operating level is used when initializing
the PHY.
Change-Id: Ia5d301efdb6964434a01264e7aa19421a41e98ca
Signed-off-by: Jack Pham <jackp@codeaurora.org>
This change initializes the tmp array elements to
ensure no use of uninitialized variable. This was caught
through Static Analysis
Change-Id: Ibc01493e9f0ce1a492579b568fa7362cb3c3b1d7
Signed-off-by: Vijay Ganti <viganti@codeaurora.org>
The range checking between "WCD_CPE_IMAGE_FNAME_MAX" and
"copy_count" is off-by-one due to the size of array
"core->dyn_fname" is "WCD_CPE_IMAGE_FNAME_MAX". Subtract
one from the range checking to fix this issue.
Change-Id: I87fd55206f79ad7b13c3878f6642bf5579303b17
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add device tree to support guest virtual machine on
msm kernel.
CRs-Fixed: 2000645
Change-Id: I4ca06c28c349dd533057b24fe6794a7c11a84cc6
Signed-off-by: Atul Raut <araut@codeaurora.org>
Exceeding sink hard reset count means no PD session active. Hence vote
to turn off PD phy regulator by closing the PD phy.
Change-Id: I2aaa3c9c7b651aec77e67139e3cdcbbf9437f091
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
