Commit graph

3261 commits

Author SHA1 Message Date
Sebastian Hesselbarth
15f18591d6 ARM: kirkwood: move device tree nodes to DT irqchip and clocksource
With recent support for true irqchip and clocksource drivers for Orion
SoCs, now make use of it on DT enabled Kirkwood boards.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-25 21:07:03 +00:00
Sebastian Hesselbarth
953b710cd5 ARM: dove: move device tree nodes to DT irqchip and clocksource
With recent support for true irqchip and clocksource drivers for Orion
SoCs, now make use of it on DT enabled Dove boards.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-25 21:06:58 +00:00
Sebastian Hesselbarth
99d6455b8e ARM: orion5x: add gigabit ethernet and mvmdio device tree nodes
This patch adds mv643xx_eth and mvmdio device tree nodes for DT enabled
Orion5x boards. Phy nodes are also added with reg property set on a
per-board basis.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-25 20:54:10 +00:00
Sebastian Hesselbarth
876e233335 ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes
This patch adds mv643xx_eth and mvmdio device tree nodes for DT enabled
Kirkwood boards. Phy nodes are also added with reg property set on a
per-board basis.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-25 20:54:04 +00:00
Sebastian Hesselbarth
4c3f6b868c ARM: dove: add gigabit ethernet and mvmdio device tree nodes
This patch adds orion-eth and mvmdio device tree nodes for DT enabled
Dove boards. As there is only one ethernet controller on Dove, a default
phy node is also added with a note to set its reg property on a per-board
basis.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-25 20:53:57 +00:00
Arnaud Ebalard
4a9f4c7f63 arm: kirkwood: readynas duo v2: Add GMT G762 Fan Controller
Now that GMT G762 PWM Fan Controller is available upstream, let's add
missing bindings in Netgear ReadyNAS Duo v2 .dts file.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-25 16:23:48 +00:00
Emilio López
b9614183f7 ARM: sunxi: make the leds' names conform to the current naming convention
Quoting from Documentation/leds/leds-class.txt:

    LED Device Naming
    =================

    Is currently of the form:

    "devicename:colour:function"

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-07-24 09:06:57 +02:00
Amit Daniel Kachhap
5c7311b5de ARM: dts: Add device tree node for exynos5440 TMU controller
This patch adds device node for TMU controller. There are 3
instances of the controllers so 3 nodes are created.

Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Reviewed-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24 14:27:26 +09:00
Tomasz Figa
15dfdfad2d ARM: dts: Add basic dts for Exynos4412-based Trats 2 board
This patch introduces device tree sources for Samsung Trats 2 board
based on Exynos4412 SoC.

Currently support includes:
 - eMMC,
 - main PMIC (max77686),
 - serial ports,
 - GPIO keys,
 - touchscreen.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24 13:41:51 +09:00
Kukjin Kim
a94f56abae ARM: dts: re-ordering exynos dtbs in Makefile
Re-ordering in alphabetical.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24 13:33:46 +09:00
Mark Brown
21274841d0 ARM: dts: Add WM1811A audio CODEC to Arndale bindings
The default audio module for the Arndale has a WM1811A on it. Add this to
the device tree bindings.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24 10:55:16 +09:00
Mark Brown
c1f2d53fc8 ARM: dts: Hook up supplies for Arndale S5M8767
As part of this add nodes for the main wall supply as well as bucks 7
and 8 which are used to drop that down for several of the LDOs.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24 10:55:16 +09:00
Mark Brown
aa3edb65fe ARM: dts: Put Arndale fixed voltage regulators on a simple-bus
Fixed voltage regulators (and other similar free standing things) are
supposed to go on a simple-bus for DT correctness reasons.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24 10:55:16 +09:00
Mark Brown
d40f314949 ARM: dts: Hook up IRQ for PMIC on Arndale
The out of tree code configures a pullup on the line indicating that it
is an active low interrupt.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24 10:55:16 +09:00
Olof Johansson
d757380c11 The imx fixes for 3.11:
* A few device tree source fixes regarding pinctrl, clock, and pwm
   backlight.
 * Fixes imx28 and imx51 audio driver failure caused by sgtl5000 codec
   driver change by supplying the correct clock for codec.
 * imx6q emi_sel clock muxing and imx6q-iomuxc-gpr macro fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJR5B55AAoJEFBXWFqHsHzOEGoH/2DesLDZkQbUCn+w7Z3H7HYi
 QAPeG1F/Ke3cBSaT+v/Z+46MgmU2gyQkxk08GRtPuVAZwCuWxSUN1H6+yakeBdHb
 XGXR25RbbASIpYdYnC37eKiU2itiBmD7CRbWJ5xPHEluAgr47vr3OKfls6laii3b
 nSM4sKz45PxBJ55M0qcE+A6oVdf9c+G0vm0aX14xEiLEUghB/U0KNKWp+B63hwfh
 tg11gNwr2dO8jv51xpwJXH17juoZ46srOzmxERJm3j08JSz/tJSvIQajSsg54aLT
 pAxToPAeuGGga5+7AanGT+repzZdd74Lp3U/lGw6WpaxLOpFf5Am3841O8qqCLw=
 =q0LM
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes

From Shawn Guo, imx fixes for 3.11:

- A few device tree source fixes regarding pinctrl, clock, and pwm
  backlight.
- Fixes imx28 and imx51 audio driver failure caused by sgtl5000 codec
  driver change by supplying the correct clock for codec.
- imx6q emi_sel clock muxing and imx6q-iomuxc-gpr macro fixes

* tag 'imx-fixes-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: dts: imx51-babbage: Pass a real clock to the codec
  ARM i.MX53: mba53: Fix PWM backlight DT node
  ARM: imx: fix vf610 enet module clock selection
  ARM: mxs: saif0 is the clock provider to sgtl5000
  ARM: i.MX6Q: correct emi_sel clock muxing
  ARM i.MX6Q: Fix IOMUXC GPR1 defines for ENET_CLK_SEL and IPU1/2_MUX
  ARM: i.MX27: Typo fix
  ARM: imx27: Fix documentation for SPLL clock
  ARM i.MX53: Fix UART pad configuration
2013-07-22 19:58:02 -07:00
Olof Johansson
9d0b375089 Merge tag 'omap-for-v3.11/fixes-against-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
Omap fixes mostly to deal with the dropping of platform data for omap4,
and to make v7_defconfig bootable on omap4 SDP with nfsroot.

* tag 'omap-for-v3.11/fixes-against-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Provide alias to USB PHY clock
  ARM: dts: Add missing vmmc2 regulator for twl
  ARM: multi_v7: Enabled omap4430 sdp nfsroot
2013-07-22 19:54:22 -07:00
Srinivas Kandagatla
334ab91d58 ARM: dts: STi: Fix pinconf setup for STiH416 serial2
This patch fixes a bug in pinctrl setup of serial2 device, Some of the
pins in the pinctrl node of serial2 do not belong to that
pin-controller. This patch divides them in the pins into there
respective pin controller nodes.

Without this patch serial on StiH416-B2000 Board will not work as it
fails with:

"st-pinctrl pin-controller-rear.3: failed to get pin(99) name
st-pinctrl pin-controller-rear.3: maps: function serial2 group serial2-0
num 4
pinconfig core: failed to register map default (3): no group/pin given"

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-22 19:34:55 -07:00
Laurent Pinchart
466f302e07 ARM: shmobile: lager-reference: Add LED6-LED8 to the device tree
LED6 to LED8 are GPIO LEDs. Add corresponding DT nodes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-23 10:05:34 +09:00
Magnus Damm
cbc60e7c04 ARM: shmobile: Add EMEV2 and KZM9D to ARCH_SHMOBILE_MULTI
Enable build of EMEV2 and KZM9D DT Reference in
case of ARCH_MULTIPLATFORM and ARCH_SHMOBILE_MULTI.

IS_ENABLED() is leaves the clock-emev2.c file out
in case of COMMON_CLK=y.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-23 09:52:25 +09:00
Laurent Pinchart
1469273960 ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree
LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:41 +09:00
Laurent Pinchart
f8f77ce940 ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT
Create two GPIO-controlled fixed-voltage regulators in the
kzm9g-reference DT and remove manual configuration of the corresponding
GPIOs from board code.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:40 +09:00
Laurent Pinchart
ec028600f4 ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree
Replace the pinctrl mappings in board code by device tree mappings.
For devices that are still instantiated from board code reference the
mappings as the default pin controller state to apply them at boot time.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:40 +09:00
Laurent Pinchart
80d1126fae ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree
LED2 to LED4 are GPIO LEDs. Add corresponding DT nodes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:39 +09:00
Laurent Pinchart
c4a003f607 ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree
Replace the pinctrl mappings in board code by device tree mappings.
For devices that are still instantiated from board code reference the
mappings as the default pin controller state to apply them at boot time.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:39 +09:00
Laurent Pinchart
0a4f788961 ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree
LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:38 +09:00
Laurent Pinchart
14d0a2b796 ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT
Reference the st1232 reset GPIO from the device tree and remove it from
board code.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:38 +09:00
Laurent Pinchart
f46a6b0f6a ARM: shmobile: armadillo-reference: Add st1232 pin mappings
Add pin mappings for the st1232 device to the device tree and reference
them as the default state for the device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:37 +09:00
Laurent Pinchart
5d244563da ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree
Replace the pinctrl mappings in board code by device tree mappings.
For devices that are still instantiated from board code reference the
mappings as the default pin controller state to apply them at boot time.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:37 +09:00
Laurent Pinchart
3f59007e8e ARM: shmobile: sh73a0: Add pin control device to device tree
Add a pfc node to the sh73a0 device tree and remove manual pinmux
initialization from the corresponding board files.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:36 +09:00
Laurent Pinchart
871e4b3e9e ARM: shmobile: sh7372: Add pin control device to device tree
Add a pfc node to the sh7372 device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:36 +09:00
Laurent Pinchart
f98e10c88a ARM: shmobile: r8a7790: Add GPIO controller devices to device tree
Add GPIO controller nodes to the r8a7790 core device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:35 +09:00
Laurent Pinchart
9694c77804 ARM: shmobile: r8a7790: Add pin control device to device tree
Add a pfc node to the r8a7790 device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:35 +09:00
Laurent Pinchart
f5c771b561 ARM: shmobile: r8a7779: Add GPIO controller devices to device tree
Add GPIO controller nodes to the r8a7779 core device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:34 +09:00
Laurent Pinchart
3ab03d01a9 ARM: shmobile: r8a7779: Add pin control device to device tree
Add a pfc node to the r8a7779 device tree and remove manual pinmux
initialization from the corresponding board files.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:34 +09:00
Laurent Pinchart
aaf7eda80c ARM: shmobile: r8a7778: Add GPIO controller devices to device tree
Add GPIO controller nodes to the r8a7778 core device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:33 +09:00
Laurent Pinchart
0697ccc054 ARM: shmobile: r8a7778: Add pin control device to device tree
Add a pfc node to the r8a7778 device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:33 +09:00
Laurent Pinchart
f36218d25f ARM: shmobile: r8a7740: Add pin control device to device tree
Add a pfc node to the r8a7740 device tree and remove manual pinmux
initialization from the corresponding board files.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:12:32 +09:00
Laurent Pinchart
803d319cb2 ARM: shmobile: r8a73a4: Add pin control device to device tree
Add a pfc node to the r8a73a4 device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[g.liakhovetski+renesas@gmail.com use 2 nodes for address and size]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22 10:11:51 +09:00
Barry Song
c8078de853 arm/dts: sirf: fix the pingroup name mismatch between drivers and dts
in drivers/pinctrl/sirf, pingroup name is cko0 and cko1, but in dts, they
are cko0 and cko1_rst. this patch fixes the error in dts.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-22 00:53:32 +02:00
Qipan Li
d58e9a02e1 pinctrl: sirf: add usp0_uart_nostreamctrl pin group for usp-uart without flowctrl
this patch adds the lost pin group which supports to let USP0 to simulate
a UART without hardware flow control.

Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-22 00:52:19 +02:00
Joseph Lo
4a7658fec6 ARM: tegra: dalmore: add PM configurations for PMC
Adding the PM configurations for PMC to support platform suspend.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 10:08:28 -06:00
Laxman Dewangan
c321d968ab ARM: tegra: enable palmas device for dalmore
Make the entry of Dalmore Power Management Unit device TPS65913
in dalmore DTS file. The Palma driver support this device.

Enable following submodule of the TPS65913:
- GPIO driver
- RTC driver.
- Power regulator driver.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
[swarren, fixed indentation and DT node sort order]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 09:30:05 -06:00
Rohit Vaswani
a39a9f7b66 ARM: msm: dts: Fix the gpio register address for msm8960
Fix the the gpio reg address for the device tree entry.

Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-07-18 12:56:10 -07:00
Nicolas Ferre
69b90f1aad ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port C
Device Tree "num-ports" property of USB host node has to be
set to maximum number of ports available.
The possibility to activate a particular port is done by specifying the proper
gpio configuration for its vbus.

This patch fixes the USB host node by configuring the 3 ports available on the
product and letting "port A" available for USB gadget usage.

Reported-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Bo Shen <voice.shen@atmel.com>
2013-07-18 18:32:46 +02:00
Simon Horman
6dace67f9b ARM: shmobile: lager: Add DT reference
This is sufficient to allow boot of the Lager board with
a console without boards-lager.c compiled into the kernel.
This is an example of a minimal but still useful initialisation
of the board using DT as much as possible.

As such it is the same as the boot of Lager that can be achieved
without a board file. The intention of adding this file
is to facilitate further work to allow board specific devices to be
initialised via DT.

Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17 14:30:03 +09:00
Guennadi Liakhovetski
b88cf6f732 ARM: shmobile: ape6evm-reference: add CPUFreq support
Add CPUFreq support to ape6evm-reference, using a max8973 regulator, that
is supplying V_DVFS for the 4 CA15 cores on r8a73a4.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17 14:28:31 +09:00
Guennadi Liakhovetski
69f366615e ARM: shmobile: ape6evm: add DT reference
This patch adds a sample DT-based APE6EVM "reference" implementation. The
use of platform-specific C-code should be avoided with this configuration
as much as possible.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17 14:28:31 +09:00
Magnus Damm
66a5cab04d ARM: shmobile: Add SMSC ethernet chip to KZM9D DT reference
Add support for the SMSC ethernet controller found
on the KZM9D board to the KZM9D DT Reference code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17 10:06:47 +09:00
Magnus Damm
03393e8fe6 ARM: shmobile: KZM9D DT reference implementation
Add a DT reference implementation for the KZM9D board.

Only DT devices are used in this case. UART, STI, GPIO
and SMP / GIC are all provided by emev2.dtsi.

There is still a board specific C file used for enabling
legacy SH clocks. This file will be removed after we have
moved over to common clocks.

Signed-off-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: Do not include trailing blank line in
 board-kzm9d-reference.c ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17 10:06:46 +09:00
Guennadi Liakhovetski
8c9b1aa418 ARM: shmobile: r8a7790: add MMCIF and SDHI DT templates
This adds DT templates for all MMCIF and SDHI controllers on r8a7790.
They are added with status="disabled". To use them platform-specific
DTs have to enable the required ones.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17 10:06:46 +09:00