Reset the freeze vote after modem SSR to allow IPA clock gating.
Change-Id: Ice78831abc52aed44d640109e1453da7e2af9702
CRs-Fixed: 2002197
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Add new sdhci host_op for updating ice configuration while sending
request through cmdq. Adding provision for supporting the ice
context configuration for ICE HCI.
Change-Id: I0e7299cfb1064c117aa94fb2416cc5cc4f1ec5f6
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Factor out the logic of getting ice config parameters from
sdhci_msm_ice_cfg().
With ICE2.0, same sdhci_msm_ice_cfg function is being called from cmdq
and noncq. But with ICE3.0 support, cmdq needs a separate host op.
Since this logic of getting ice config is common for noncq and cmdq,
by having it in separate function, same can be reused
in cmdq host op as-well.
Change-Id: If2cf26667acd54cb7ee7bd6283d8f24fcbf60791
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Factor out the logic of updating the SDHC ICE config registers
from sdhci_msm_ice_cfg().
For ICE3.0, different set of SDHC ICE registers are need to be updated.
So having this logic in separate functions, we can have logical
separation for ICE2.0 and ICE3.0.
Change-Id: Ib3d3f9701875000985dc9382bdcdf5fb0e872a43
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
KTM won't apply a frequency mitigation request for an offline cluster.
Instead when the CPU is brought back online, the cpufreq will ask for
new request and KTM will limit the frequency at that time. With the LMH
DCVSh doing the frequency mitigation, the frequency request is not
applied when the CPU comes back online.
For targets with LMH DCVSh frequency mitigation, apply the latest
frequency mitigation request when the CPU comes back online.
Change-Id: If280e4e19fc5dd717aae4f0992d2e2950c057c57
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
This enables CCID bridge between CCID Host and CCID
daemon in userspace.
Change-Id: Ie68bf6c98b53d992f43b2a4daa168a8b3caac5b6
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
This allows ccid device to enumerate using usb compostion
driver supporting config file system. Also fix compliation
errors.
Change-Id: I363b8f967781ab162fbd7ded0b397c86cf3d3fc5
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
During U1 exit, the controller might send LFPS ping at the same
time when the P1 to P0 transition occurs(GUSB3PIPECTL[27] = '0').
The de-assertion of the pipe_TxElecIdle signal during the
pipe_PowerDown signal transition violates the PIPE specification.
Fix this by setting GUSB3PIPECTL[27] = '1' so that there is no
pipe_PowerDown transition during U1 exit. This fix is applicable
for DWC3 revision 3.10 or older.
Change-Id: I7708d42c0f8b67d315be59e9ff9f04ccb74b9b5c
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Modified size and alignment in adsp-region node to allow for
HLOS memory to be used for growing of heap and for loading
shared objects on DSP.
Change-Id: I41e95100d67141e30f02f4e718f66e3b2dfe157b
Acked-by: Ashwini Patil <aapatil@qti.qualcomm.com>
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
In case of device shutdown DMA memory allocation might
fail with GFP_KERNEL flag. This failure might occur
since the calling process received SIGKILL.In order to
avoid that scenario perform the DMA allocation with atomic
flag.
CRs-Fixed: 1116368
Signed-off-by: Amir Levy <alevy@codeaurora.org>
Change-Id: Id4d29d0f4a25f5630911db79c236fb08da752be4
WCN3990 target uses different bit filed for ce
gather support.
Populate valid src descriptor buffers and gather
flag for WCN3990 target.
CRs-Fixed: 1115328
Change-Id: Ia7e73bd3009823357bb7df06eddb4903efb47286
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Up-streamed driver uses NAPI in rx data path. Add napi
implementation in snoc layer.
CRs-Fixed: 1112504
Change-Id: I33d3405ee99233af474f8bc236c43898086f044c
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Add WCN3990 wlan module startup, power up and power down
sequence. Register interrupt handler and tasklet for each
copy engine interrupt line.
Add WCN3990 bus layer private API to configure and flush
the Tx/Rx copy engine pipe.
CRs-Fixed: 1112504
Change-Id: I9f0e2f080c8c92d0db5df465d3e79de058451b28
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
RF clock of wcn3990 follows SW_CTRL pin. Enable this configuration for
lower power with BT/FM use cases.
CRs-Fixed: 2000919
Change-Id: I547d27a1d22824fa39578b65fdfffa6ce52c00cf
Signed-off-by: Rupesh Tatiya <rtatiya@codeaurora.org>
