Use the same FG ESR timer value (96) for charging and
discharging. This is to avoid the frequent periodic spur
seen in the RF performance with charger connected.
CRs-Fixed: 2046553
Change-Id: I9d1ad61f75f553bf527906715699817236f44b01
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Kconfig doesn't have the CONFIG_ part of the option, so don't use
it here. This fixes a kconfig warning about missing a dependency
for "CONFIG_SPI" which doesn't exist because it's supposed to be
"SPI".
Change-Id: Ie449ff250dd87b0a445d34ee079082c6e91f147c
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
When the USB_ID line is pulled low for a very short time there is a
possibility that the SW misses rising edge(removal) event. This may
lead to the state where charger is stuck in the boost-mode forever.
Fix this my adding a SW based glitch logic which checks for the
USB_ID after a SW debounce time and then notifies its presence/removal to
the USB driver.
CRs-Fixed: 2044958
Change-Id: I31974f7d68b435bbef329278cedbd726ada02e3f
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
In case of emmc5.0 cards where HS400 mode and CMD5(awake) partial
init is enabled -> mmc_partial_init is broken and gives below errors.
Fix this by adding calibration logic in case of HS400 mode.
NOTE: In HS400 mode tuning is only performed once during bootup (in
HS200 mode).
Post to that it is always DLL calibration which is performed (in
system/runtime resume).
So even for below issue since timing is already changed using
cached_ios, then do the calibration using ->execute_tuning.
<dmesg errors w/o patch>
root@msm8996:/ # [ 76.011036] mmc0: mmc_runtime_suspend:
[ 77.315903] mmc0: mmc_runtime_resume:
[ 77.367866] mmc0: mmc_partial_init: starting partial init
[ 77.376225] mmc0: mmc_test_awake_ext_csd: mmc_get_ext_csd failed
(-110)
[ 77.382190] mmc0: mmc_partial_init: done partial init (-110)
[ 77.387536] mmc0: _mmc_resume: awake failed (-110), fallback to full
init
[ 77.394405] mmc0: mmc_init_card:
[ 77.402762] mmc0: mmc_init_card: mmc_send_op_cond() fails -110
[ 77.407573] mmc0: MMC card re-init failed rc = -110 (retries = 3)
[ 77.507261] mmc0: _mmc_resume: awake failed (-110), fallback to full
init
[ 77.513293] mmc0: mmc_init_card:
<dmesg with patch>
[ 74.002624] mmc0: mmc_runtime_resume:
[ 74.056089] mmc0: mmc_partial_init: starting partial init
[ 74.067143] mmc0: mmc_partial_init: done partial init (0)
Change-Id: I0e55efb7863b75bd584843c3fc920c845996eb5c
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
For a BADD 3.0 device, the Data Endpoint wMaxPacketSize
of an Alt Setting must be one of the values mentioned in
the specifications. Similarly, the unit IDs of the source
units of any entity is prescribed by the specs. Add
support for checking the error(default) branches in the
relevant switch cases and accordingly handle them.
Change-Id: Ib88eee21df012089d41c4e78a161ddc6767e1bd4
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Verify cid variable before accessing it and
initialize invoket variable before bailing out.
Change-Id: Idec133bf8ba1a000b83f92bb567f0b75bbdab340
Signed-off-by: Tharun Kumar Merugu <mtharu@codeaurora.org>
The patch updates the client's free memory
count variable after the successful allocation.
CRs-Fixed: 2046258
Change-Id: Ibae317596557e23d2b2278daf433bd293a8bd0be
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
Protect polling interval update event in the governor
with mutex lock.
This will avoid parallel execution of update interval event
on different cores, resulting in memory poison overwritten.
CRs-Fixed: 2035633
Change-Id: Ib919d9774317bc01e3cf581c169c5d18555f484f
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
There could be clocks where the clock operations of set_rate_and_parent
would be defined to take care of setting rate and updating parent.
Move the vdd voting logic to ensure the vdd levels are voted prior to
updating rate and parent.
Change-Id: I57f903f95f290627d676afd567a6e6d21decf4a3
Signed-off-by: Taniya Das <tdas@codeaurora.org>
In commit d70b0a18f6 ("scsi: ufs: add command
logging infrastructure"), cmd_id is not initialized
and lrbp->cmd is explicitly dereferenced without
checking NULL. Fix them by initializing cmd_id with
an initial value 0 and checking NULL for lrbp->cmd.
Change-Id: I6f66066adc8d53e3615df50ac49dd313f6d7ea8e
Signed-off-by: Can Guo <cang@codeaurora.org>
When a GP application is loaded and the crypto engine is accessed,
a NOC error will happen if CE clock is not enabled. Thus, add bus
scaling support for GP operations.
Change-Id: I59d63be9e08b2c135edc6ec224ec1a355434e1ec
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
This allows to instantiate two dial up network interfaces and
one NMEA interface.
Change-Id: I59f5d93a5e9360628d8004508162dcdb42f6520d
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
DMA clients may opt to clear cpu virtual address mapping
on alloc. On free when dma buffer is given back to cpu,
ensure that it is always remapped in cpu address space.
Change-Id: I67f9616d9bee8cf07cbe81468ebf174d2599f4c5
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
