Add support for the msm8996 CV2X board that uses an mdm9650
module as endpoint for CV2X radio functionality. The msm8996
is responsible for running the CV2X application stack and
providing external debug and control access to the system.
Change-Id: I575f565580e8f81f15a9017a97aa064e7f2c6088
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Currently the handler skips calling the update function
but uses the final result from the votable not_ok_to_qnovo_votable.
Fix it by calling the update function so it gets a chance to vote on
not_ok_to_qnovo_votable.
Moreover do not return early from ptrain_done handler without setting
QNI_PT_VOTER's vote on pt_dis_votable. This is a self clearing bit and
unless QNI_PT_VOTER's bit is removed, the next restart may not trickle
down to hw.
Change-Id: I0a860287b638d20b6a4aa05c7bb25e9b81a980d2
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Usually, DC path is connected to a wireless charger. It is advisable
to disable qnovo when charging wirelessly.
Disable qnovo for dc path unless a property in device tree is set to
specifically enable qnovo for dc path.
Change-Id: I4ca475f30ca0a564f533b4ed8bcd55cfb5da291f
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
If a charger was already present at bootup, we may not delay the start
of qnovo by 15 seconds.
Fix it by setting the chg_ready votable to false during init.
Change-Id: Icf185763576f65028cf2ef0d1c0bbcf6570460ba
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
While shutting down set the not_ok_to_qnovo votable to true, so that
we skip measuring ESR if a pulse train done interrupt triggers right
during the shutdown.
Change-Id: If3a0a8e9b1d60920cbbedc16af91c05caec8dcb2
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Sometimes we observe that the ptrain_en bit is reset back to 0 while
in restart work.
Set it again if so.
Change-Id: I15d46f96a8b751f0386677e3b6876eec8bba9a1f
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
If for some reasons like ioctl fuss test or reading dpcd caps failed,
max lane count supported might be zero. In such cases handle link clk
calculation gracefully.
Change-Id: I7cb08abce76025930681f6532c03708793d3acc4
Signed-off-by: Narender Ankam <nankam@codeaurora.org>
Mount QT800S suspend and resume actions to early fb event,
so speed up touch response.
Change-Id: I1ca610131e94af806dab4dfa8709fdd9c0556971
Signed-off-by: Jin Fu <jinf@codeaurora.org>
Revert this change to avoid TZ dependency in OTA upgrades.
This reverts commit 46756eb931
Change-Id: I2227d1dfa19fa75ea25d42702a9757043b8d63dd
Signed-off-by: Tharun Kumar Merugu <mtharu@codeaurora.org>
Synchronize camera_v4l2_open and camera_v4l2_close to avoid use
after free.
Change-Id: I1a203ae0753b265594f616496ab8c57e0521fd9f
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
In SDM636 target CPU frequency corners are updated this
calls for a change in memlat and mincpu node cpufreq to
DDR mapping.
Change-Id: Ief1bf8c3b177b35e6ad178656c736b68401a1845
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
As per the hardware documentation, operating limits of WLED is
from 0.4% to 100%. Cap the lower limit to 0.4% to ensure proper
operation.
Change-Id: I7ee2684ea2186d4fdda5cea9a4d421b429a6d4fd
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
During Modem graceful shutdown, QMI messages from WLAN FW can
still be delivered to host even after icnss receives Modem
shutdown notification from SSR framework. So prevent processing
any such messages from FW after Modem shutdown.
CRs-Fixed: 2095386
Change-Id: Ice21d043393b0f7b97aaccd68e1b28702cc9e393
Signed-off-by: Sameer Thalappil <sameert@codeaurora.org>
The invalid slave_info is used by msm_sensor_driver_probe.
This causes crash when ioctl VIDIOC_MSM_SENSOR_INIT_CFG is
called repeatedly.
CRs-fixed: 2090483
Change-Id: I467c0a19d84658fb33da9677dcb904ebf49e4800
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
Change IPA firmware loading on MDM devices to use
Linux PIL instead of manual loading.
Loading with PIL is more secure. Firmware needs
to be signed and then authenticated by Trust Zone.
Change-Id: If8bda76795dcd000327c6f6345a9b38474b609fd
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
Adding a NULL check before disable regulator to make sure
that its not released before
Change-Id: I21ff1649db3e00588f1c320418fca270bc0264bc
Signed-off-by: Vijay kumar Tumati <vtumati@codeaurora.org>
spcom_device_poll() return POLLERR rather than -EINVAL.
Change-Id: Ifce0fa9c6a0a5136ae1d109543a9345ad77359bf
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
Update the TUNE2 parameter by adjusting the programmed tune2 value
with the correction value, if mentioned in dtsi to improve rise/fall times.
In case efuse register value is zero after correction, write previous TUNE2
register value as it is instead of writing hardcoded value. And correction
value should be between [-10 5] in order to take into consideration while
updating TUNE2 register with fused value.
Change-Id: Iaf61705bfd0c7b2cb62de8816c912f05876f001c
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Remove cdsp pil node and corresponding carveout region,
also add 1MB buffer at MBA boundary for sdm636.
Change-Id: I6adb0f2ed37559b91d0b607c729e66142f49e86f
Signed-off-by: Jitendra Sharma <shajit@codeaurora.org>
Add socinfo support and CPU IDs for SDM636
and SDA636 SOCs.
Change-Id: If14654c3fb93a52e4db0270e60cb6e6371ef077f
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Add the required device tree files to support all the platforms
with SDM636 and SDA636.
Change-Id: Iff673b1626acb2bb83c0b7706b118e24919c3934
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Add support for downmix mixer control for multi channel primary and
interactive for a stereo device concurrent use case in which
primary is expected to be downmix accordingly mix matrix coefficientsw.
Change-Id: I8d6e72cdac1eea6cdfbc9922e484abaeb36021db
CRs-Fixed: 2093120
Signed-off-by: Varun Balaraj <varunb@codeaurora.org>
Clients can register and deregister to BAM based on usecase.
IPC Log pages are created during clients registration to BAM.
Update support to destroy log pages during BAM deregistration.
Change-Id: I1da266c61ebd57d6cfead6fc5b64a05be5620cf4
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
