The SPMI based PMICs have the HIGH and LOW GPIO output
strength mappings interchanged, fix them.
Keep the mapping same for older SSBI based PMICs.
CRs-Fixed: 2246473
Change-Id: I4ec78469c436b54642ee67108943c82fba46e1c4
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Add DT node for early domain driver for
msm8996 and remove reserved memory node
for lk_pool as it will be populated by
bootloader if early domain is enabled.
Change-Id: Idd364e2bfab97af78292b1e6a6e172a7b7c4c3a0
Signed-off-by: Vivek Kumar <vivekuma@codeaurora.org>
Invalid type conversion with x64 bit command VIDIOC_MSM_LASER_LED_CFG
passed in,for which the type should be "msm_laser_led_cfg_data_t"
Change-Id: I43e112224c612fb5390fa5fc23e8ae9c0e553288
CRs-Fixed: 2299699
Signed-off-by: Abhishek Abbanaveni <aabban@codeaurora.org>
Signed-off-by: E V Ravi <evenka@codeaurora.org>
There is a possibility of use-after-free and
double free because of not marking buffer as
NULL after freeing. The patch marks buffer
as NULL after freeing in error case.
Change-Id: Iacf8f8a4a4e644f48c87d5445ccd594766f2e156
Signed-off-by: Hardik Arya <harya@codeaurora.org>
Remove CONFIG_USELIB configuration to make kernel compliance
with android Vendor test suite.
Change-Id: I7ca9bbff514f318e595d44e56611b4f1fe6e8c65
Signed-off-by: Venkata Rao Kakani <vkakani@codeaurora.org>
habmm_socket_recv() can return -EINTR which indicate that
the operation must be restarted.
Change-Id: I0860a9593303c7bf1fea5e0349595c4b2fb085eb
Signed-off-by: Youssef Youssef <yyoussef@codeaurora.org>
There is a need to pin the interrupts and rx worker thread to a
specific cpu set for power and performance. Add support to define
the cpu set in device tree. This change does not include any hotplug
support.
Change-Id: Ibe651e987e72f5119e9e8453d87fa8059219ec1f
Signed-off-by: Chris Lew <clew@codeaurora.org>
If we dont lock with spinlock before calling serial_clock_vote
in serial_clock_vote few global parameters may change values,
to avoid the race condition added hci_ibs_lock spinlock before
calling serial_clock_vote
Change-Id: I040d7ef0d998a60a274bf8d89649785db007afa3
Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
Change 5G regdomain to FCC13 of country CL.
Change country CR to all bandwitch support.
Update DFS pattern and regdomain of country IN.
Update max tx power of country JP.
Add regdomain info of country MM.
Remove regdomain of country PS.
Update DFS pattern of country SA to ETSI-302502.
Change-Id: I34c2cc0b4737eaf3ddaa011f796df952b900bef8
CRs-Fixed: 2349775
Signed-off-by: Will Huang <wilhuang@codeaurora.org>
In soundwire controller, bank switch happen twice
for a playback session with stereo speakers. Ensure
the setting of div2 applied to inactive bank before
bank switch occurs to avoid impact based on bank chosen.
Change-Id: I033b19e78309485ca9da85ec67b54409e6fe22cc
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
If user passes an aribitary command with _IOC_DIR(cmd) == _IOC_NONE,
"arg" should point to any arbitrary address.
Check for invalid command and return error.
Change-Id: If60191a07bb80939af2d471a5acf1b17dd68aa58
CRs-Fixed: 2299567
Signed-off-by: Abhishek Abbanaveni <aabban@codeaurora.org>
Upon driver unbind usb_free_all_descriptors() function frees all
speed descriptor pointers without setting them to NULL. In case
gadget speed changes (i.e from super speed plus to super speed)
after driver unbind only upto super speed descriptor pointers get
populated. Super speed plus desc still holds the stale (already
freed) pointer. As a result next composition switch results into
double free of super speed plus descriptor. Fix this issue by
setting all descriptor pointers to NULL after freeing them in
usb_free_all_descriptors(). Also clean up gsi_unbind() which is
setting up descriptor pointers to NULL already.
Change-Id: I4f28294c165bb3b5dc9feb4f22d819f527ad4d50
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Remove the out of bound access vulnerability in the qce
driver reachable via ioctl.
Change-Id: I4320cd27334eaae975f4a6ad07fb7b2e5ebccffd
Signed-off-by: Monika Singh <monising@codeaurora.org>
HDR info frames were not disabled after a hotplug and app closure
or in the event of an unexpected termination of the userspace driver.
Fixed the issue by resetting to HDR_DISABLE state in hdmi bridge disable.
Change-Id: Iead5cfe11512a8c49b6a2183561de427ce16f393
Signed-off-by: Navid Bahrani <nbahrani@codeaurora.org>
Currently, masks will be cleared during logging mode
switch if physical USB disconnection will happen in
concurrency. There is no need to clear the masks in
logging switch case. The patch ensures that masks
will be cleared only in valid cases.
Change-Id: I68f5335c4fa8fe06ba1f686f29336a8150991368
Signed-off-by: Mohit Aggarwal <maggarwa@codeaurora.org>
Added the new bootmarkers in struct boot_stats for
bootloader_checksum_start and bootloader_checksum_end
to match the exact order of entries defined in the
bootloader enum bs_entry. And also moved the
bootloader_early_camera_start entry to the bottom
to match the same.
Change-Id: I1fa19aa21b658d8fdf7dcf5bba6658c40420d426
Signed-off-by: E V Ravi <evenka@codeaurora.org>
For checking memory leak issue, which was already enabled
in LA 1.2 SP.
Change-Id: I6d9beeadb98bbda84d61821e6f5bfc61d28f9316
Signed-off-by: Nijun Gong <ngong@codeaurora.org>
Device assert in ep empty
affecting LPM scenario.
Remove device assert in ep empty check.
which is not really required since IPA BAM
reset is taken care.
Change-Id: I57ae9ada7f15c335a181247675f10b607774fd14
Signed-off-by: Mohammed <mjavid@codeaurora.org>
usb3 phy is needed when core is operating at super speed or
higher. Do not turn on usb3 phy clocks even when core is
programmed to work at high speed only mode. While at it,
remove redundant module parameter to control max speed. Speed
can be controlled using existing sysfs entry.
Example: To set High speed only:
echo "high" > /sys/devices/platform/soc/<devname>/speed
To set super speed:
echo "super" > /sys/devices/platform/soc/<devname>/speed
Change-Id: I24a9a869d97e6efc3ebc0d7a1374805139c65648
Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Current code checks IN_P3 status (i.e. USB is into U3 or not) with
dwc3_prepare_suspend() API using in_host_mode or vbus_active flag.
With data role swap transition (e.g. dfp -> ufp case), in_host_mode
flag sets to false and vbus_active flag sets to true due to quick
calling of stop host and start peripheral mode from policy engine.
This results into USB doesn't go into LPM with stop host mode (i.e.
USB LPM is aborted due to vbus_active flag seen as true) which
results into no USB enumeration in start peripheral mode. Current
code doesn't perform block reset while stopping USB host mode
functionality. Hence to invoke USB core and PHYs related reset and
init functionality allow USB LPM by replacing vbus_active check with
in_device_mode flag which provides status of USB controller's data
role while going into USB LPM. Start peripheral mode brings USB
out of LPM which performs POR functionality.
Change-Id: I2bbb804bce5f910826ba30a3dda4317bbdb2e1f1
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Add a vote for csi1 clks for early rear view camera for
automotive.
Change-Id: Ie89a99e0333d3755f025297fb7f815bbbdc3e9d9
Signed-off-by: Jeff Bernard <jbernard@codeaurora.org>
Ensure camera driver waits for early camera
handoff from LK to avoid hardware contention.
Change-Id: If301b63b34331285ac3d126543ca3c1d5cae6ba4
Signed-off-by: E V Ravi <evenka@codeaurora.org>
