This enables the WA for vph_pwr_2p5_ok signal remaining invalid.
CRs-Fixed: 1053543
Change-Id: I58c23adace7c4c29f352edb706666effe69dc8ad
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
The LCDB module does not sample the vph_pwr_2p5_ok signal if it drops
low when the module is off. It will continue with the last known
state of vph_pwr_2p5_ok which could cause a problem if vph_pwr_2p5_ok
is indeed low. Fix this by re-enabling of the module to activate
the vph_pwr_2p5_ok signal sampling.
CRs-Fixed: 1053543
Change-Id: If0950140cae12c92bb6be428b22400b492f823e4
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Provide means to set ship mode on smb138x charger. While in parallel
charger mode make the main charger set ship mode on smb138x before
calling ship mode on itself.
Change-Id: I9b96b425829520d95632aa32d2297940cca5e254
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
When HDMI controller is configured as non-DVI with CEA mode, SDE
driver needs to program AVI, VSIF and SPD information into HW to
generate correct info frame.
CRs-Fixed: 2010135
Change-Id: Ib218761c63b13aa229fc24519ceb9ccd0bd34ce2
Signed-off-by: Jin Li <jinl@codeaurora.org>
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Add a private HDMI bridge implementation for SDE. This is
intended to support new HDMI features specific to SDE driver.
CRs-Fixed: 2010135
Change-Id: I0269b1ff79d8be4f48643a9e4e904427791ac1ac
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
For modem SSR, APPS needs to halt modem consumer channels after
shutdown to make sure GSI FW does not access any modem's memory.
Change-Id: I6889a2ad509e0b1104ef8c3f65f24fe39b10745d
CRs-Fixed: 2008582
Acked-by: Ady Abrahan <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Expose a new API from GSI driver to allow client driver to
disable channel for other Execution Environment.
This API will be used as part of SSR cleanup.
Change-Id: I3b9400643aff76ca2195a597aba9ea18aab3085e
CRs-Fixed: 2008582
Acked-by: Ady Abrahan <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
When the PD voltage changes AICL needs to be rerun to increase the input
current. Do it.
Change-Id: Ifa49547037d17c3ec2f01b6ac70faa310585825a
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
Enable watchdog node for sdm630 which is used to detect system hang.
Change-Id: Idfb307dd991e17e0030921e03c6f8a04afb9bc1d
Signed-off-by: Saranya Chidura <schidura@codeaurora.org>
Added CONFIG_CORESIGHT_CTI and CONFIG_CORESIGHT_CTI_SAVE_DISABLE
in perf_defconfig of SDM660 to enable cti without save-restore
functionality for CPU cores.
Change-Id: I19a2fb8a3097bac910bb5e50c9a80d84f03098d3
Signed-off-by: Saranya Chidura <schidura@codeaurora.org>
Added CONFIG_CORESIGHT_CTI_SAVE_DISABLE in kconfig of
coresight to choose CTI without save-restore functionality
for CPU cores.
Change-Id: I48128fbeda293a73d78946b8c222b5d0393c7595
Signed-off-by: Saranya Chidura <schidura@codeaurora.org>
To avoid running into issues with the MMNOC RCG being enabled due
to an enable request from a secure world entity whilst the HLOS code
has disabled its parents, park the RCG at CXO when its disabled.
Change-Id: I98e2efaed01ee4e92a457c56f2e276985882dbbb
Signed-off-by: Taniya Das <tdas@codeaurora.org>
If the RCG frequency table does not have CXO as one of its supported
frequencies, and if a client calls clk_enable on it prior to setting
its rate, the current RCG code would configure it to the lowest
supported frequency instead which would then lead the subsequent
call to update the configuration to fail because the parent PLLs are
not active. Correct this behavior. Also update the index in case cxo_f
frequency table is used for rcg configure.
Change-Id: Ib2c09f9f503724bafd32b963b5b0ea84da7c4b7b
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Not all MHI hardware channels support burst mode, add
support to enable burst mode per channel basis.
CRs-Fixed: 1027069
Change-Id: Icd3061f1a1a4b4b3dab8f9fe3b989a8afefd18b2
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
Add support for new MHI hardware channel 102 to be
use by MHI clients as ADPL channel.
CRs-Fixed: 1027069
Change-Id: Ib3c2019fc269064d097bb7f40f01d4580e63a603
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
