Synchronize camera_v4l2_open and camera_v4l2_close to avoid use
after free.
Change-Id: I1a203ae0753b265594f616496ab8c57e0521fd9f
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
In SDM636 target CPU frequency corners are updated this
calls for a change in memlat and mincpu node cpufreq to
DDR mapping.
Change-Id: Ief1bf8c3b177b35e6ad178656c736b68401a1845
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
As per the hardware documentation, operating limits of WLED is
from 0.4% to 100%. Cap the lower limit to 0.4% to ensure proper
operation.
Change-Id: I7ee2684ea2186d4fdda5cea9a4d421b429a6d4fd
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
During Modem graceful shutdown, QMI messages from WLAN FW can
still be delivered to host even after icnss receives Modem
shutdown notification from SSR framework. So prevent processing
any such messages from FW after Modem shutdown.
CRs-Fixed: 2095386
Change-Id: Ice21d043393b0f7b97aaccd68e1b28702cc9e393
Signed-off-by: Sameer Thalappil <sameert@codeaurora.org>
The invalid slave_info is used by msm_sensor_driver_probe.
This causes crash when ioctl VIDIOC_MSM_SENSOR_INIT_CFG is
called repeatedly.
CRs-fixed: 2090483
Change-Id: I467c0a19d84658fb33da9677dcb904ebf49e4800
Signed-off-by: Rahul Sharma <sharah@codeaurora.org>
Change IPA firmware loading on MDM devices to use
Linux PIL instead of manual loading.
Loading with PIL is more secure. Firmware needs
to be signed and then authenticated by Trust Zone.
Change-Id: If8bda76795dcd000327c6f6345a9b38474b609fd
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
Adding a NULL check before disable regulator to make sure
that its not released before
Change-Id: I21ff1649db3e00588f1c320418fca270bc0264bc
Signed-off-by: Vijay kumar Tumati <vtumati@codeaurora.org>
spcom_device_poll() return POLLERR rather than -EINVAL.
Change-Id: Ifce0fa9c6a0a5136ae1d109543a9345ad77359bf
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
Update the TUNE2 parameter by adjusting the programmed tune2 value
with the correction value, if mentioned in dtsi to improve rise/fall times.
In case efuse register value is zero after correction, write previous TUNE2
register value as it is instead of writing hardcoded value. And correction
value should be between [-10 5] in order to take into consideration while
updating TUNE2 register with fused value.
Change-Id: Iaf61705bfd0c7b2cb62de8816c912f05876f001c
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Remove cdsp pil node and corresponding carveout region,
also add 1MB buffer at MBA boundary for sdm636.
Change-Id: I6adb0f2ed37559b91d0b607c729e66142f49e86f
Signed-off-by: Jitendra Sharma <shajit@codeaurora.org>
Add socinfo support and CPU IDs for SDM636
and SDA636 SOCs.
Change-Id: If14654c3fb93a52e4db0270e60cb6e6371ef077f
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Add the required device tree files to support all the platforms
with SDM636 and SDA636.
Change-Id: Iff673b1626acb2bb83c0b7706b118e24919c3934
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Add support for downmix mixer control for multi channel primary and
interactive for a stereo device concurrent use case in which
primary is expected to be downmix accordingly mix matrix coefficientsw.
Change-Id: I8d6e72cdac1eea6cdfbc9922e484abaeb36021db
CRs-Fixed: 2093120
Signed-off-by: Varun Balaraj <varunb@codeaurora.org>
Clients can register and deregister to BAM based on usecase.
IPC Log pages are created during clients registration to BAM.
Update support to destroy log pages during BAM deregistration.
Change-Id: I1da266c61ebd57d6cfead6fc5b64a05be5620cf4
Signed-off-by: Rama Krishna Phani A <rphani@codeaurora.org>
Create support for early mounting of system and vendor partitions
in the kernel on msm8996 platforms.
Change-Id: I3caf26d3e2a371ccd63a2823fe3e487461a8dd08
Signed-off-by: Anthony Mah <amah@codeaurora.org>
The TX FIFO write reg and the RX FIFO read reg are controlled
by this processor. Keep track of the state of these two indexes
to reduce the amount of SPI reads.
CRs-Fixed: 2093123
Change-Id: I4ffa0e08bce6dabd57f33a13fef8107211ce3f09
Signed-off-by: Chris Lew <clew@codeaurora.org>
Fix the error return path in qcom_step_chg_init() to free up the
allocated memory and registered wake source.
Change-Id: I8f93246d27f79a7c759b3afc4a4544d9ffca7a80
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
the invalid data of sensor_init_cfg_data, is used by
msm_sensor_driver_probe. This cause crash when ioctl
VIDIOC_MSM_SENSOR_INIT_CFG repeatedly and aggressively.
Change-Id: Idffcd3b82b9590dbfdcaf14b80668cc894178f54
Signed-off-by: Haibin Liu <haibinl@codeaurora.org>
