Fix ordering of link creation between node->prev and prev->next in
osq_lock(). A case in which the status of optimistic spin queue is
CPU6->CPU2 in which CPU6 has acquired the lock. At this point if CPU0
comes in to acquire osq_lock, it will update the tail count. After tail
count update if CPU2 starts to unqueue itself from optimistic spin queue,
it will find updated tail count with CPU0 and update CPU2 node->next to
NULL in osq_wait_next(). If reordering of following stores happen then
prev->next where prev being CPU2 would be updated to point to CPU0 node:
node->prev = prev;
WRITE_ONCE(prev->next, node);
At this point if next instruction
WRITE_ONCE(next->prev, prev);
in CPU2 path is committed before the update of CPU0 node->prev = prev then
CPU0 node->prev will point to CPU6 node. At this point if CPU0 path's
node->prev = prev is committed resulting in change of CPU0 prev back to
CPU2 node. CPU2 node->next is NULL currently, so if CPU0 gets into unqueue
path of osq_lock it will keep spinning in infinite loop as condition
prev->next == node will never be true.
Change-Id: I48d847096daf3c228de90ae1cd2a6415b7bde65a
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
The legacy detection workaround change restricts DCP to 1.5A draw,
regardless of legacy/non-legacy type. This was to prevent a legacy
(non-compliant) cable, incorrectly detected as non-legacy cable from
drawing more than 1.5A.
The issue with legacy bit is that hardware could end up reporting
non-legacy for a legacy cable (not the other way round). We want to
ensure that for non-compliant legacy cable SDP/CDP current limits
are honoured and that for a Rp = 10k legacy cable VBUS shouldn't go
higher than 5V.
This cap of 1.5A on DCP is not necessary. Moreover AICL will limit the
current if needed.
To realize this force the Rp based current whenever DCP or float
is seen via the LEGACY_UNKNOWN_VOTER. LEGACY_UNKNOWN_VOTER is not
removed unless a confirmed hvdcp or pd is seen.
Change-Id: I89505e9db4f045aaf71ab0ee534de783ea4d2df3
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
MHI change requires all work to be finished before returning from
the ERROR, SHUTDOWN and DISABLE callbacks. Call mhi xprt enable and
disable functions directly instead of deferring the work. Remove
calls to mhi_close_channel to prevent calling MHI after the disable
callback.
CRs-Fixed: 1095436
Change-Id: I37910cfd3b51693b1f3bc84815d95595602690e8
Signed-off-by: Chris Lew <clew@codeaurora.org>
The MHI driver is changing their APIs to use the device
node during registration. This change accommodates the
API changes and callback state changes.
CRs-Fixed: 1095436
Change-Id: I1899d97d676c28b89bb5f85c1a92732f6cfec904
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
In kernel version 4.1, tracefs was separated from debugfs into its
own filesystem. Prior to this split, files in
/sys/kernel/debug/tracing could be labeled during filesystem
creation using genfscon or later from userspace using setxattr. This
change re-enables support for genfscon labeling.
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
(cherry picked from commit 6a3911837da0a90ed599fd0a9836472f5e7ddf1b)
Change-Id: I98ad8c829302346705c1abcdc8f019f479fdefb6
Bug: 62413700
Excessive logging due to several successive memory allocation failure
may cause a watchdog bite. Hence, this change adds ratelimit to logging
on memory allocation failure.
Change-Id: I8e5d78918a32c48ef7fa587f3dc63cbd1f065d5f
Signed-off-by: Deepak Kumar <dkumar@codeaurora.org>
The debug option to always ON the GPU clocks does not check the regulator
state. If the user tries to set this option while GPU is in Slumber state
then enabling clocks will fail.
Make sure we enable the GPU regulators before enabling its clocks.
Change-Id: Id77773224c674fe2e1b6179a039750b24e5e5f87
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
prepare_to_wait() will enqueue the thread on the given queue
and put it into the given execution state,
which is TASK_INTERRUPTIBLE.
Further processing in function, calls mutex_lock(),
will go into a new version of the going-to-sleep code,
changing the task state.
That, of course, may well interfere with the outer
sleeping code.
So, nesting of sleeping primitives in this way is discouraged.
And new warning was added to point out this kind of nesting.
Fix the nesting of sleeping primitives with the new solution
provide in linux kernel.
Change-Id: Id1a5f64472cd2d63e679706c6482db98f89ec765
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
Resolve memory out of bound access by correcting the
length of the buffer to be copied.
Change-Id: I2cc74a664399913acf67464a5f6827b100522676
Signed-off-by: Revathi Uddaraju <revathiu@codeaurora.org>
Currently, there is possibility of out-of-bound accesses during
handling of data in non-hdlc path. The patch adds proper protection
when processing non-hdlc packet information to fix the issue.
CRs-Fixed: 2029216
Change-Id: I07c466f85bd8ac08226948fea86b1d8567e68431
Signed-off-by: Hardik Arya <harya@codeaurora.org>
The pointer req_frm is coming from userspace, it may overflow stream_info.
Adding a bound check to prevent the same.
CRs-fixed: 2008683
Change-Id: I8682e09ff2ab7ba490bbbd9e20db978493c5f3e4
Signed-off-by: Senthil Kumar Rajagopal <skrajago@codeaurora.org>
Signed-off-by: Andy Sun <bins@codeaurora.org>
Live Lock due to task spinning while unqueue of CPU osq_node
from optimistic_spin_queue. Task T1 had decremented mutex count to
acquire the lock on CPU0. Before setting owner it got preempted. On
CPU1 task T2 acquired osq_lock and started spinning on owner of mutex
with preemption disabled. CPU1 runq has one task, so need_resched will
not be set. On CPU0 task T3 tried to acquire osq_lock to spin on the
same mutex. At this time following scenario causes soft lockup:
After preemption of task T1, RT task T3 tried to acquire the same
mutex. It will start spinning on the osq_lock until the lock is available
or need_resched is set. For RT task, need_resched will not be set. Task T3
will not be able to bail out of the infinite loop.
Change-Id: Ifd7506047119a22e14b15459ac6b04b410ba1c84
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Current upstream parser only handles RGB deep color
modes.
Add support in the SDE EDID parser module to parse
HDMI VSDB block and indicate support for YUV 420
deep color modes in the sink.
Change-Id: If6c007263094e7716a29cae503d3e3471ae04306
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add default value support for plane enum property which caller is
able to pass in different default value when initialize the enum
property list.
Change-Id: I57595bf7c42b0e528a18ab0951655a169b00d611
Signed-off-by: Jin Li <jinl@codeaurora.org>
Signed-off-by: Yunyun Cao <yunyunc@codeaurora.org>
Conntrack, if enabled, verifies complete checksum on all tcp
packets. If a packet is corrupted, it sets ip_summed field
to CHECKSUM_COMPLETE and checksum valid field to false.
With these changes such packet will be dropped.
Packets that are corrupted can go into userspace even when
the checksum is wrong. The io_vec library pushes the data into
pipe before checking the checksum. If the checksum is wrong,
the copied data is not reverted. Users observe corrupted data
in the application memory due to such corrupted packets.
This fix is to plug one such hole.
This change might be redundant on kernels after v4.9.
Change-Id: Iffface598d0fa2b25fb9c20c7aa6443aab9d8aea
Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org>
Neighbour index of step table possibly have same position,
so i2c operation reported invalid size parameters.
we add protection condition to return success value.
Change-Id: I7dab8f44a99c7c3c7d6996c8decb8bcd09c246c9
Signed-off-by: penliu <pengfeiliu@codeaurora.org>
Sysfs attribute "inactivity_timer" not being used anymore so remove that
entry from sysfs.
CRs-Fixed: 2048725
Change-Id: I30d2d4a3cb9899b7975a6395eab90337fc006488
Signed-off-by: Arumuga Durai A <cadurai@codeaurora.org>
The PM_QOS_CPU_DMA_LATENCY QOS request attached to an IRQ is ignored
if the IRQ is affined to an isolated CPU. As isolated CPUs enter
deep sleep state, it is better not to affine IRQs to those CPUs.
Change-Id: Ieab4a04eca222b91159208b21bc9e14390ecd62e
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Userspace can set the default IRQ affinity setting by writing into
/proc/irq/default_smp_affinity file. When an IRQ affinity is
broken during isolation/hotplug,override the affinity to online and
un-isolated CPUs from the default affinity CPUs. If no such CPU
is available, then only override with cpu_online_mask.
Change-Id: I7578728ed0d7c17c5890d9916cfd6451d1968568
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
With commit bfc60d474137 ("genirq: Use irq_set_affinity_locked to change
irq affinity"), affinity listeners receive the notification when the irq
affinity is changed during migration. If there is no online and
un-isolated CPU available from the user specified affinity, the affinity
is overridden with all online and un-isolated CPUs. The same cpumask is
notified to PM QOS affinity listener which applies PM_QOS_CPU_DMA_LATENCY
vote to all those CPUs. As the low level irqchip driver sets affinity to
only one CPU, do the same while overriding the affinity during migration.
Change-Id: I0bcb75dd356658da100fbeeefd33ef8b121f4d6d
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Add support of cnss_utils for WLAN. Export APIs to WLAN
host driver which are used to set/get WLAN related
information. These information could be retrived later
when WLAN driver is reloaded.
CRs-Fixed: 2060693
Change-Id: I2c8c36602ec8af133946ff00c41ce648a2628041
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Add matrix limiter to ADM. Limiter is used to
prevent saturation when mixing multiple audio
streams. It should be applied after ADM open
but before ADM matrix map.
Change-Id: I6787fe869e8ceee13694245b744ecd74c3a49682
CRs-Fixed: 2064258
Signed-off-by: Ben Romberger <bromberg@codeaurora.org>
When write masters are reloaded pingpong status regi-
-ster will not be reset. Instead, it would be holding
a stale data, until new axi_done irq is interrupted.
So, place a check to validate the pingpong register
value based on the reloaded status of write masters.
Change-Id: Id14b886154f8a8ef8d5c05338023d8172d6925d0
Signed-off-by: Lokesh Kumar Aakulu <lkumar@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=Dwzp
-----END PGP SIGNATURE-----
Merge 4.4.75 into android-4.4
Changes in 4.4.75
fs/exec.c: account for argv/envp pointers
autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL
lib/cmdline.c: fix get_options() overflow while parsing ranges
KVM: PPC: Book3S HV: Preserve userspace HTM state properly
CIFS: Improve readdir verbosity
HID: Add quirk for Dell PIXART OEM mouse
signal: Only reschedule timers on signals timers have sent
powerpc/kprobes: Pause function_graph tracing during jprobes handling
Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
time: Fix clock->read(clock) race around clocksource changes
target: Fix kref->refcount underflow in transport_cmd_finish_abort
iscsi-target: Reject immediate data underflow larger than SCSI transfer length
drm/radeon: add a PX quirk for another K53TK variant
drm/radeon: add a quirk for Toshiba Satellite L20-183
drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating
drm/amdgpu: adjust default display clock
USB: usbip: fix nonconforming hub descriptor
rxrpc: Fix several cases where a padded len isn't checked in ticket decode
of: Add check to of_scan_flat_dt() before accessing initial_boot_params
mtd: spi-nor: fix spansion quad enable
powerpc/slb: Force a full SLB flush when we insert for a bad EA
usb: gadget: f_fs: avoid out of bounds access on comp_desc
net: phy: Initialize mdio clock at probe function
net: phy: fix marvell phy status reading
nvme/quirk: Add a delay before checking for adapter readiness
nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too
Linux 4.4.75
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
debug offset comes from the user and can hold any value which can
cause unaligned access. This change fixes the unaligned access
problem on debug offset by properly aligning it.
Change-Id: Ie4de9a12433f6ffd568c6c86928b71a5537b0dff
Signed-off-by: Harsh Sahu <hsahu@codeaurora.org>
The PM_QOS_CPU_DMA_LATENCY vote attached to an IRQ is discarded,
if it is affined to an isolated CPU. So we need atleast 1 CPU
in online and un-isolate state. The scheduler rejects isolating
a CPU if it is the only online and un-isolated CPU in the system.
Add the same check for CPU hotplug.
Change-Id: I5bdfe6e3bb0352ed3ae5a2de90097b73d248f3fc
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
commit b5a10c5f7532b7473776da87e67f8301bbc32693 upstream.
Commit 54adc01055b7 ("nvme/quirk: Add a delay before checking for adapter
readiness") introduced a quirk to adapters that cannot read the bit
NVME_CSTS_RDY right after register NVME_REG_CC is set; these adapters
need a delay or else the action of reading the bit NVME_CSTS_RDY could
somehow corrupt adapter's registers state and it never recovers.
When this quirk was added, we checked ctrl->tagset in order to avoid
quirking in probe time, supposing we would never require such delay
during probe. Well, it was too optimistic; we in fact need this quirk
at probe time in some cases, like after a kexec.
In some experiments, after abnormal shutdown of machine (aka power cord
unplug), we booted into our bootloader in Power, which is a Linux kernel,
and kexec'ed into another distro. If this kexec is too quick, we end up
reaching the probe of NVMe adapter in that distro when adapter is in
bad state (not fully initialized on our bootloader). What happens next
is that nvme_wait_ready() is unable to complete, except if the quirk is
enabled.
So, this patch removes the original ctrl->tagset verification in order
to enable the quirk even on probe time.
Fixes: 54adc01055b7 ("nvme/quirk: Add a delay before checking for adapter readiness")
Reported-by: Andrew Byrne <byrneadw@ie.ibm.com>
Reported-by: Jaime A. H. Gomez <jahgomez@mx1.ibm.com>
Reported-by: Zachary D. Myers <zdmyers@us.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: Jeffrey Lien <Jeff.Lien@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[mauricfo: backport to v4.4.70 without nvme quirk handling & nvme_ctrl]
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Tested-by: Narasimhan Vaidyanathan <vnarasimhan@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54adc01055b75ec8769c5a36574c7a0895c0c0b2 upstream.
When disabling the controller, the specification says the register
NVME_REG_CC should be written and then driver needs to wait the
adapter to be ready, which is checked by reading another register
bit (NVME_CSTS_RDY). There's a timeout validation in this checking,
so in case this timeout is reached the driver gives up and removes
the adapter from the system.
After a firmware activation procedure, the PCI_DEVICE(0x1c58, 0x0003)
(HGST adapter) end up being removed if we issue a reset_controller,
because driver keeps verifying the NVME_REG_CSTS until the timeout is
reached. This patch adds a necessary quirk for this adapter, by
introducing a delay before nvme_wait_ready(), so the reset procedure
is able to be completed. This quirk is needed because just increasing
the timeout is not enough in case of this adapter - the driver must
wait before start reading NVME_REG_CSTS register on this specific
device.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
[mauricfo: backport to v4.4.70 without nvme quirk handling & nvme_ctrl]
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Tested-by: Narasimhan Vaidyanathan <vnarasimhan@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 898805e0cdf7fd860ec21bf661d3a0285a3defbd upstream.
The Marvell driver incorrectly provides phydev->lp_advertising as the
logical and of the link partner's advert and our advert. This is
incorrect - this field is supposed to store the link parter's unmodified
advertisment.
This allows ethtool to report the correct link partner auto-negotiation
status.
Fixes: be937f1f89 ("Marvell PHY m88e1111 driver fix")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb1a619735b4660f21bce3e728b937640024b4ad upstream.
USB PHYs need the MDIO clock divisor enabled earlier to work.
Initialize mdio clock divisor in probe function. The ext bus
bit available in the same register will be used by mdio mux
to enable external mdio.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Fixes: ddc24ae1 ("net: phy: Broadcom iProc MDIO bus driver")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7f73850bb4fac1e2209a4dd5e636d39be92f42c upstream.
Companion descriptor is only used for SuperSpeed endpoints,
if the endpoints are HighSpeed or FullSpeed, the Companion
descriptor will not allocated, so we can only access it if
gadget is SuperSpeed.
I can reproduce this issue on Rockchip platform rk3368 SoC
which supports USB 2.0, and use functionfs for ADB. Kernel
build with CONFIG_KASAN=y and CONFIG_SLUB_DEBUG=y report
the following BUG:
==================================================================
BUG: KASAN: slab-out-of-bounds in ffs_func_set_alt+0x224/0x3a0 at addr ffffffc0601f6509
Read of size 1 by task swapper/0/0
============================================================================
BUG kmalloc-256 (Not tainted): kasan: bad access detected
----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Allocated in ffs_func_bind+0x52c/0x99c age=1275 cpu=0 pid=1
alloc_debug_processing+0x128/0x17c
___slab_alloc.constprop.58+0x50c/0x610
__slab_alloc.isra.55.constprop.57+0x24/0x34
__kmalloc+0xe0/0x250
ffs_func_bind+0x52c/0x99c
usb_add_function+0xd8/0x1d4
configfs_composite_bind+0x48c/0x570
udc_bind_to_driver+0x6c/0x170
usb_udc_attach_driver+0xa4/0xd0
gadget_dev_desc_UDC_store+0xcc/0x118
configfs_write_file+0x1a0/0x1f8
__vfs_write+0x64/0x174
vfs_write+0xe4/0x200
SyS_write+0x68/0xc8
el0_svc_naked+0x24/0x28
INFO: Freed in inode_doinit_with_dentry+0x3f0/0x7c4 age=1275 cpu=7 pid=247
...
Call trace:
[<ffffff900808aab4>] dump_backtrace+0x0/0x230
[<ffffff900808acf8>] show_stack+0x14/0x1c
[<ffffff90084ad420>] dump_stack+0xa0/0xc8
[<ffffff90082157cc>] print_trailer+0x188/0x198
[<ffffff9008215948>] object_err+0x3c/0x4c
[<ffffff900821b5ac>] kasan_report+0x324/0x4dc
[<ffffff900821aa38>] __asan_load1+0x24/0x50
[<ffffff90089eb750>] ffs_func_set_alt+0x224/0x3a0
[<ffffff90089d3760>] composite_setup+0xdcc/0x1ac8
[<ffffff90089d7394>] android_setup+0x124/0x1a0
[<ffffff90089acd18>] _setup+0x54/0x74
[<ffffff90089b6b98>] handle_ep0+0x3288/0x4390
[<ffffff90089b9b44>] dwc_otg_pcd_handle_out_ep_intr+0x14dc/0x2ae4
[<ffffff90089be85c>] dwc_otg_pcd_handle_intr+0x1ec/0x298
[<ffffff90089ad680>] dwc_otg_pcd_irq+0x10/0x20
[<ffffff9008116328>] handle_irq_event_percpu+0x124/0x3ac
[<ffffff9008116610>] handle_irq_event+0x60/0xa0
[<ffffff900811af30>] handle_fasteoi_irq+0x10c/0x1d4
[<ffffff9008115568>] generic_handle_irq+0x30/0x40
[<ffffff90081159b4>] __handle_domain_irq+0xac/0xdc
[<ffffff9008080e9c>] gic_handle_irq+0x64/0xa4
...
Memory state around the buggy address:
ffffffc0601f6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0601f6480: 00 00 00 00 00 00 00 00 00 00 06 fc fc fc fc fc
>ffffffc0601f6500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffffc0601f6580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffffc0601f6600: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Jerry Zhang <zhangjerry@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Note this patch is not upstream. The bug fix was fixed differently in
upstream prior to the bug being identified.]
The SLB miss handler calls slb_allocate_realmode() in order to create an
SLB entry for the faulting address. At the very start of that function
we check that the faulting Effective Address (EA) is less than
PGTABLE_RANGE (ignoring the region), ie. is it an address which could
possibly fit in the virtual address space.
For an EA which fails that test, we branch out of line (to label 8), but
we still go on to create an SLB entry for the address. The SLB entry we
create has a VSID of 0, which means it will never match anything in the
hash table and so can't actually translate to a physical address.
However that SLB entry will be inserted in the SLB, and so needs to be
managed properly like any other SLB entry. In particular we need to
insert the SLB entry in the SLB cache, so that it will be flushed when
the process is descheduled.
And that is where the bugs begin. The first bug is that slb_finish_load()
uses cr7 to decide if it should insert the SLB entry into the SLB cache.
When we come from the invalid EA case we don't set cr7, it just has some
junk value from userspace. So we may or may not insert the SLB entry in
the SLB cache. If we fail to insert it, we may then incorrectly leave it
in the SLB when the process is descheduled.
The second bug is that even if we do happen to add the entry to the SLB
cache, we do not have enough bits in the SLB cache to remember the full
ESID value for very large EAs.
For example if a process branches to 0x788c545a18000000, that results in
a 256MB SLB entry with an ESID of 0x788c545a1. But each entry in the SLB
cache is only 32-bits, meaning we truncate the ESID to 0x88c545a1. This
has the same effect as the first bug, we incorrectly leave the SLB entry
in the SLB when the process is descheduled.
When a process accesses an invalid EA it results in a SEGV signal being
sent to the process, which typically results in the process being
killed. Process death isn't instantaneous however, the process may catch
the SEGV signal and continue somehow, or the kernel may start writing a
core dump for the process, either of which means it's possible for the
process to be preempted while its processing the SEGV but before it's
been killed.
If that happens, when the process is scheduled back onto the CPU we will
allocate a new SLB entry for the NIP, which will insert a second entry
into the SLB for the bad EA. Because we never flushed the original
entry, due to either bug one or two, we now have two SLB entries that
match the same EA.
If another access is made to that EA, either by the process continuing
after catching the SEGV, or by a second process accessing the same bad
EA on the same CPU, we will trigger an SLB multi-hit machine check
exception. This has been observed happening in the wild.
The fix is when we hit the invalid EA case, we mark the SLB cache as
being full. This causes us to not insert the truncated ESID into the SLB
cache, and means when the process is switched out we will flush the
entire SLB. Note that this works both for the original fault and for a
subsequent call to slb_allocate_realmode() from switch_slb().
Because we mark the SLB cache as full, it doesn't really matter what
value is in cr7, but rather than leaving it as something random we set
it to indicate the address was a kernel address. That also skips the
attempt to insert it in the SLB cache which is a nice side effect.
Another way to fix the bug would be to make the entries in the SLB cache
wider, so that we don't truncate the ESID. However this would be a more
intrusive change as it alters the size and layout of the paca.
This bug was fixed in upstream by commit f0f558b131db ("powerpc/mm:
Preserve CFAR value on SLB miss caused by access to bogus address"),
which changed the way we handle a bad EA entirely removing this bug in
the process.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 807c16253319ee6ccf8873ae64f070f7eb532cd5 upstream.
With the S25FL127S nor flash part, each writing to the configuration
register takes hundreds of ms. During that time, no more accesses to
the flash should be done (even reads).
This commit adds a wait loop after the register writing until the flash
finishes its work.
This issue could make rootfs mounting fail when the latter was done too
much closely to this quad enable bit setting step. And in this case, a
driver as UBIFS may try to recover the filesystem and may broke it
completely.
Signed-off-by: Joël Esponde <joel.esponde@honeywell.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ec754410cb3e931a6c4920b1a150f21a94a2bf4 upstream.
An empty __dtb_start to __dtb_end section might result in
initial_boot_params being null for arch/mips/ralink. This showed that the
boot process hangs indefinitely in of_scan_flat_dt().
Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14605/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f2f97656ada8d811d3c1bef503ced266fcd53a0 upstream.
This fixes CVE-2017-7482.
When a kerberos 5 ticket is being decoded so that it can be loaded into an
rxrpc-type key, there are several places in which the length of a
variable-length field is checked to make sure that it's not going to
overrun the available data - but the data is padded to the nearest
four-byte boundary and the code doesn't check for this extra. This could
lead to the size-remaining variable wrapping and the data pointer going
over the end of the buffer.
Fix this by making the various variable-length data checks use the padded
length.
Reported-by: 石磊 <shilei-c@360.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.c.dionne@auristor.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec963b412a54aac8e527708ecad06a6988a86fb4 upstream.
Fix up the root-hub descriptor to accommodate the variable-length
DeviceRemovable and PortPwrCtrlMask fields, while marking all ports as
removable (and leaving the reserved bit zero unset).
Also add a build-time constraint on VHCI_HC_PORTS which must never be
greater than USB_MAXCHILDREN (but this was only enforced through a
KConfig constant).
This specifically fixes the descriptor layout whenever VHCI_HC_PORTS is
greater than seven (default is 8).
Fixes: 04679b3489 ("Staging: USB/IP: add client driver")
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
[ johan: backport to v4.4, which uses VHCI_NPORTS ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52b482b0f4fd6d5267faf29fe91398e203f3c230 upstream.
Increase the default display clock on newer asics to
accomodate some high res modes with really high refresh
rates.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=93826
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05b4017b37f1fce4b7185f138126dd8decdb381f upstream.
We were using the wrong structure which lead to an overflow
on some boards.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=101387
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit abb85a9b512e8ca7ad04a5a8a6db9664fe644974 upstream.
When iscsi WRITE underflow occurs there are two different scenarios
that can happen.
Normally in practice, when an EDTL vs. SCSI CDB TRANSFER LENGTH
underflow is detected, the iscsi immediate data payload is the
smaller SCSI CDB TRANSFER LENGTH.
That is, when a host fabric LLD is using a fixed size EDTL for
a specific control CDB, the SCSI CDB TRANSFER LENGTH and actual
SCSI payload ends up being smaller than EDTL. In iscsi, this
means the received iscsi immediate data payload matches the
smaller SCSI CDB TRANSFER LENGTH, because there is no more
SCSI payload to accept beyond SCSI CDB TRANSFER LENGTH.
However, it's possible for a malicous host to send a WRITE
underflow where EDTL is larger than SCSI CDB TRANSFER LENGTH,
but incoming iscsi immediate data actually matches EDTL.
In the wild, we've never had a iscsi host environment actually
try to do this.
For this special case, it's wrong to truncate part of the
control CDB payload and continue to process the command during
underflow when immediate data payload received was larger than
SCSI CDB TRANSFER LENGTH, so go ahead and reject and drop the
bogus payload as a defensive action.
Note this potential bug was originally relaxed by the following
for allowing WRITE underflow in MSFT FCP host environments:
commit c72c525022
Author: Roland Dreier <roland@purestorage.com>
Date: Wed Jul 22 15:08:18 2015 -0700
target: allow underflow/overflow for PR OUT etc. commands
Cc: Roland Dreier <roland@purestorage.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73d4e580ccc5c3e05cea002f18111f66c9c07034 upstream.
This patch fixes a se_cmd->cmd_kref underflow during CMD_T_ABORTED
when a fabric driver drops it's second reference from below the
target_core_tmr.c based callers of transport_cmd_finish_abort().
Recently with the conversion of kref to refcount_t, this bug was
manifesting itself as:
[705519.601034] refcount_t: underflow; use-after-free.
[705519.604034] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 20116.512 msecs
[705539.719111] ------------[ cut here ]------------
[705539.719117] WARNING: CPU: 3 PID: 26510 at lib/refcount.c:184 refcount_sub_and_test+0x33/0x51
Since the original kref atomic_t based kref_put() didn't check for
underflow and only invoked the final callback when zero was reached,
this bug did not manifest in practice since all se_cmd memory is
using preallocated tags.
To address this, go ahead and propigate the existing return from
transport_put_cmd() up via transport_cmd_finish_abort(), and
change transport_cmd_finish_abort() + core_tmr_handle_tas_abort()
callers to only do their local target_put_sess_cmd() if necessary.
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Tested-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Gary Guo <ghg@datera.io>
Tested-by: Chu Yuan Lin <cyl@datera.io>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
