[ Upstream commit 8309f86cd41e8714526867177facf7a316d9be53 ]
Since the clocksource watchdog will only detect broken TSC after the
fact, all TSC based clocks will likely have observed non-continuous
values before/when switching away from TSC.
Therefore only thing to fully avoid random clock movement when your
BIOS randomly mucks with TSC values from SMI handlers is reporting the
TSC as unstable at boot.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dea20579a69ab68cdca6adf79bb7c0c162eb9b72 ]
staging: wlan-ng: prism2mgmt.c: This patches fixes a double endian conversion.
cpu_to_le16() was called twice first in prism2mgmt_scan and again inside
hfa384x_drvr_setconfig16() for the same variable, hence it was swapped
twice. Incidentally, it also fixed the following sparse warning:
drivers/staging/wlan-ng/prism2mgmt.c:173:30: warning: incorrect type in assignment (different base types)
drivers/staging/wlan-ng/prism2mgmt.c:173:30: expected unsigned short [unsigned] [usertype] word
drivers/staging/wlan-ng/prism2mgmt.c:173:30: got restricted __le16 [usertype] <noident>
Unfortunately, only compile tested.
Signed-off-by: Andrea della Porta <sfaragnaus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2fe4bff3516924a37e083e3211364abe59db1161 ]
Currently the following errors are seen:
[ 14.015056] mc13xxx 0-0008: Failed to read IRQ status: -6
[ 27.321093] mc13xxx 0-0008: Failed to read IRQ status: -6
[ 27.411681] mc13xxx 0-0008: Failed to read IRQ status: -6
[ 27.456281] mc13xxx 0-0008: Failed to read IRQ status: -6
[ 30.527106] mc13xxx 0-0008: Failed to read IRQ status: -6
[ 36.596900] mc13xxx 0-0008: Failed to read IRQ status: -6
Also when reading the interrupts via 'cat /proc/interrupts' the
PMIC GPIO interrupt counter does not stop increasing.
The reason for the storm of interrupts is that the PUS field of
register IOMUXC_SW_PAD_CTL_PAD_CSI0_DAT5 is currently configured as:
10 : 100k pullup
and the PMIC interrupt is being registered as IRQ_TYPE_LEVEL_HIGH type,
which is the correct type as per the MC34708 datasheet.
Use the default power on value for the IOMUX, which sets PUS field as:
00: 360k pull down
This prevents the spurious PMIC interrupts from happening.
Commit e1ffceb078 ("ARM: imx53: qsrb: fix PMIC interrupt level")
correctly described the irq type as IRQ_TYPE_LEVEL_HIGH, but
missed to update the IOMUX of the PMIC GPIO as pull down.
Fixes: e1ffceb078 ("ARM: imx53: qsrb: fix PMIC interrupt level")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 216c4e9db4c9d1d2a382b42880442dc632cd47d9 ]
In the current code we accidentally return the successful result from
idr_alloc() instead of a negative error pointer. The caller is looking
for an error pointer and so it treats the returned value as a valid
pointer.
This one might be a bit serious because if it lets people get around the
kernel's protection for remapping NULL. I'm not sure.
Fixes: 75d2364ea0 (PowerCap: Add class driver)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0c2aa0e4b308815e877601845c1a89913f9bd2b9 ]
The GISB bus can support addresses beyond 32-bits. So this commit
corrects support for reading a captured 64-bit address into a 64-bit
variable by obtaining the high bits from the ARB_ERR_CAP_HI_ADDR
register (when present) and then outputting the full 64-bit value.
It also removes unused definitions.
Fixes: 44127b771d ("bus: add Broadcom GISB bus arbiter timeout/error handler")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 856c7ccb9ce7a061f04bdf586f649cb93654e294 ]
This commit corrects the bug introduced in commit f80835875d
("bus: brcmstb_gisb: Look up register offsets in a table") such
that gisb_write() translates the register enumeration into an
offset from the base address for writes as well as reads.
Fixes: f80835875d ("bus: brcmstb_gisb: Look up register offsets in a table")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cd1230070ae1c12fd34cf6a557bfa81bf9311009 ]
In fs/cifs/smb2pdu.h, we have:
#define SMB2_SHARE_TYPE_DISK 0x01
#define SMB2_SHARE_TYPE_PIPE 0x02
#define SMB2_SHARE_TYPE_PRINT 0x03
Knowing that, with the current code, the SMB2_SHARE_TYPE_PRINT case can
never trigger and printer share would be interpreted as disk share.
So, test the ShareType value for equality instead.
Fixes: faaf946a7d ("CIFS: Add tree connect/disconnect capability for SMB2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1c4d5f51a812a82de97beee24f48ed05c65ebda5 ]
There are several paths in vmxnet3, where settings changes cause the
adapter to be brought down and back up (vmxnet3_set_ringparam among
them). Should part of the reset operation fail, these paths call
vmxnet3_force_close, which enables all napi instances prior to calling
dev_close (with the expectation that vmxnet3_close will then properly
disable them again). However, vmxnet3_force_close neglects to clear
VMXNET3_STATE_BIT_QUIESCED prior to calling dev_close. As a result
vmxnet3_quiesce_dev (called from vmxnet3_close), returns early, and
leaves all the napi instances in a enabled state while the device itself
is closed. If a device in this state is activated again, napi_enable
will be called on already enabled napi_instances, leading to a BUG halt.
The fix is to simply enausre that the QUIESCED bit is cleared in
vmxnet3_force_close to allow quesence to be completed properly on close.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Shrikrishna Khare <skhare@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 67325e988faea735d663799b6d152b5f4254093c ]
The PR KVM implementation of the PAPR HPT hypercalls (H_ENTER etc.)
access an image of the HPT in userspace memory using copy_from_user
and copy_to_user. Recently, the declarations of those functions were
annotated to indicate that the return value must be checked. Since
this code doesn't currently check the return value, this causes
compile warnings like the ones shown below, and since on PPC the
default is to compile arch/powerpc with -Werror, this causes the
build to fail.
To fix this, we check the return values, and if non-zero, fail the
hypercall being processed with a H_FUNCTION error return value.
There is really no good error return value to use since PAPR didn't
envisage the possibility that the hypervisor may not be able to access
the guest's HPT, and H_FUNCTION (function not supported) seems as
good as any.
The typical compile warnings look like this:
CC arch/powerpc/kvm/book3s_pr_papr.o
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c: In function ‘kvmppc_h_pr_enter’:
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:53:2: error: ignoring return value of ‘copy_from_user’, declared with attribute warn_unused_result [-Werror=unused-result]
copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg));
^
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:74:2: error: ignoring return value of ‘copy_to_user’, declared with attribute warn_unused_result [-Werror=unused-result]
copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE);
^
... etc.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d899520b0431e70279bfb5066ecb6dc91d0b7072 ]
One of Elan modules with sample version is 0x74 and hw_version is 0x03 has
a bug in absolute mode implementation, so let it run in default PS/2
relative mode.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c5928551fd41b2eecdad78fa2be2a4a13ed5fde9 ]
Before trying to properly initialize the touchpad and generate bunch of
errors, let's first see it there is anything at the given address. If we
get error, fail silently with -ENXIO.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0fe20fafd1791f993806d417048213ec57b81045 ]
Currently rcode is being initialized to NX_RCODE_SUCCESS and later it
is checked to see if it is not NX_RCODE_SUCCESS which is never true. It
appears that there is an unintentional missing assignment of rcode from
the return of the call to netxen_issue_cmd() that was dropped in
an earlier fix, so add it in.
Detected by CoverityScan, CID#401900 ("Logically dead code")
Fixes: 2dcd5d95ad ("netxen_nic: fix cdrp race condition")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8d66c30b12ed3cb533696dea8b9a9eadd5da426a ]
The qca_spi driver causes alignment issues on ARM devices.
So fix this by using netdev_alloc_skb_ip_align().
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06ecf ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f36ea50ca0043e7b1204feaf1d2ba6bd68c08d36 ]
When formatting NVMe to 512B/4K + T10 DIf/DIX, dd with split op returns
"Input/output error". Looks block layer split the bio after calling
bio_integrity_prep(bio). This patch fixes the issue.
Below is how we debug this issue:
(1)format nvme to 4K block # size with type 2 DIF
(2)dd with block size bigger than 1024k.
oflag=direct
dd: error writing '/dev/nvme0n1': Input/output error
We added some debug code in nvme device driver. It showed us the first
op and the second op have the same bi and pi address. This is not
correct.
1st op: nvme0n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400,
dsmgmt=0x0, AT=0x0 & RT=0x505
Guard 0x00b1, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828
2nd op: nvme0n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0,
AT=0x0 & RT=0x605 ==> This op fails and subsequent 5 retires..
Guard 0x00b1, AT 0x0000, RT physical 0x00000605 RT virtual 0x00002828
With the fix, It showed us both of the first op and the second op have
correct bi and pi address.
1st op: nvme2n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400,
dsmgmt=0x0, AT=0x0 & RT=0x505
Guard 0x5ccb, AT 0x0000, RT physical 0x00000505 RT virtual
0x00002828
2nd op: nvme2n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0,
AT=0x0 & RT=0x605
Guard 0xab4c, AT 0x0000, RT physical 0x00000605 RT virtual
0x00003028
Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 560d388950ceda5e7c7cdef7f3d9a8ff297bbf9d ]
cifs_relock_file() can perform a down_write() on the inode's lock_sem even
though it was already performed in cifs_strict_readv(). Lockdep complains
about this. AFAICS, there is no problem here, and lockdep just needs to be
told that this nesting is OK.
=============================================
[ INFO: possible recursive locking detected ]
4.11.0+ #20 Not tainted
---------------------------------------------
cat/701 is trying to acquire lock:
(&cifsi->lock_sem){++++.+}, at: cifs_reopen_file+0x7a7/0xc00
but task is already holding lock:
(&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&cifsi->lock_sem);
lock(&cifsi->lock_sem);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by cat/701:
#0: (&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310
stack backtrace:
CPU: 0 PID: 701 Comm: cat Not tainted 4.11.0+ #20
Call Trace:
dump_stack+0x85/0xc2
__lock_acquire+0x17dd/0x2260
? trace_hardirqs_on_thunk+0x1a/0x1c
? preempt_schedule_irq+0x6b/0x80
lock_acquire+0xcc/0x260
? lock_acquire+0xcc/0x260
? cifs_reopen_file+0x7a7/0xc00
down_read+0x2d/0x70
? cifs_reopen_file+0x7a7/0xc00
cifs_reopen_file+0x7a7/0xc00
? printk+0x43/0x4b
cifs_readpage_worker+0x327/0x8a0
cifs_readpage+0x8c/0x2a0
generic_file_read_iter+0x692/0xd00
cifs_strict_readv+0x29f/0x310
generic_file_splice_read+0x11c/0x1c0
do_splice_to+0xa5/0xc0
splice_direct_to_actor+0xfa/0x350
? generic_pipe_buf_nosteal+0x10/0x10
do_splice_direct+0xb5/0xe0
do_sendfile+0x278/0x3a0
SyS_sendfile64+0xc4/0xe0
entry_SYSCALL_64_fastpath+0x1f/0xbe
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f4b23de3dda1536590787c9e5c3d16b8738ab108 ]
It turns out the Linux server has a bug in its implementation of
supattr_exclcreat; it returns the set of all attributes, whether
or not they are supported by minor version 1.
In order to avoid a regression, we therefore apply the supported_attrs
as a mask on top of whatever the server sent us.
Reported-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d04a4c76f71dd5335f8e499b59617382d84e2b8d ]
The perf tool assumes that kernel symbols are never present at address
zero. In fact it assumes if functions that map symbols to addresses
return zero, that the symbol was not found.
Given that s390's _text symbol historically is located at address zero
this yields at least a couple of false errors and warnings in one of
perf's test cases about not present symbols ("perf test 1").
To fix this simply move the _text symbol to address 0x200, just behind
the initial psw and channel program located at the beginning of the
kernel image. This is now hard coded within the linker script.
I tried a nicer solution which moves the initial psw and channel
program into an own section. However that would move the symbols
within the "real" head.text section to different addresses, since the
".org" statements within head.S are relative to the head.text
section. If there is a new section in front, everything else will be
moved. Alternatively I could have adjusted all ".org" statements. But
this current solution seems to be the easiest one, since nobody really
cares where the _text symbol is actually located.
Reported-by: Zvonko Kosic <zkosic@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8896c23d2ef803f1883fea73117a435925c2b4c4 ]
alloc_pidmap() advances pid_namespace::last_pid. When first pid
allocation fails, then next created process will have pid 2 and
pid_ns_prepare_proc() won't be called. So, pid_namespace::proc_mnt will
never be initialized (not to mention that there won't be a child
reaper).
I saw crash stack of such case on kernel 3.10:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: proc_flush_task+0x8f/0x1b0
Call Trace:
release_task+0x3f/0x490
wait_consider_task.part.10+0x7ff/0xb00
do_wait+0x11f/0x280
SyS_wait4+0x7d/0x110
We may fix this by restore of last_pid in 0 or by prohibiting of futher
allocations. Since there was a similar issue in Oleg Nesterov's commit
314a8ad0f1 ("pidns: fix free_pid() to handle the first fork failure").
and it was fixed via prohibiting allocation, let's follow this way, and
do the same.
Link: http://lkml.kernel.org/r/149201021004.4863.6762095011554287922.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Andrei Vagin <avagin@virtuozzo.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit efda760fe95ea15291853c8fa9235c32d319cd98 ]
As reported by David Jeffery: "a signal was sent to lockd while lockd
was shutting down from a request to stop nfs. The signal causes lockd
to call restart_grace() which puts the lockd_net structure on the grace
list. If this signal is received at the wrong time, it will occur after
lockd_down_net() has called locks_end_grace() but before
lockd_down_net() stops the lockd thread. This leads to lockd putting
the lockd_net structure back on the grace list, then exiting without
anything removing it from the list."
So, perform the final locks_end_grace() from the the lockd thread; this
ensures it's serialized with respect to restart_grace().
Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 48f5bccc60675f8426a6159935e8636a1fd89f56 ]
When users set flow control using ethtool the bits are set properly in the
CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n
Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size
reset value. When receive flow control is enabled on a port, the port's
associated FIFO block allocation must be adjusted. The port RX allocation
must increase to accommodate the flow control runout. The TRM recommends
numbers of 5 or 6.
Hence, apply required Port FIFO configuration to
Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during
interface initialization.
Cc: Schuyler Patton <spatton@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aeca3a77b1e0ed06a095933b89c86aed007383eb ]
The zero padding that is added to NTB's does
not zero the memory correctly.
This is because the skb_put modifies the value
of skb_out->len which results in the memset
command not setting any memory to zero as
(ctx->tx_max - skb_out->len) == 0.
I have resolved this by storing the size of
the memory to be zeroed before the skb_put
and using this in the memset call.
Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit df5303a8aa9a0a6934f4cea7427f1edf771f21c2 ]
Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.
This was found with the future CONFIG_FORTIFY_SOURCE feature.
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9e4eb1ce472fbf7b007f23c88ec11c37265e401c ]
Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.
This was found with the future CONFIG_FORTIFY_SOURCE feature.
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f8860ce836f2d502b07ef99559707fe55d90f5bc ]
If ieee80211_hw_restart() is called during authentication, the
authentication process will continue, causing the driver to be called
in a wrong state. This ultimately causes an oops in the iwlwifi
driver (at least).
This fixes bugzilla 195299 partly.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195299
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d90c902449a7561f1b1d58ba5a0d11728ce8b0b2 ]
The sadb_x_sec_len is stored in the unit 'byte divided by eight'.
So we have to multiply this value by eight before we can do
size checks. Otherwise we may get a slab-out-of-bounds when
we memcpy the user sec_ctx.
Fixes: df71837d50 ("[LSM-IPSec]: Security association restriction.")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 55d694275f41a1c0eef4ef49044ff29bc3999490 ]
Let the target core check the CMD_T_ABORTED flag instead of the SRP
target driver. Hence remove the transport_check_aborted_status()
call. Since state == SRPT_STATE_CMD_RSP_SENT is something that really
should not happen, do not try to recover if srpt_queue_response() is
called for an I/O context that is in that state. This patch is a bug
fix because the srpt_abort_cmd() call is misplaced - if that function
is called from srpt_queue_response() it should either be called
before the command state is changed or after the response has been
sent.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: David Disseldorp <ddiss@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0048fdd06614a4ea088f9fcad11511956b795698 ]
If the server returns NFS4ERR_CONN_NOT_BOUND_TO_SESSION because we
are trunking, then RECLAIM_COMPLETE must handle that by calling
nfs4_schedule_session_recovery() and then retrying.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 42fc6c6cb1662ba2fa727dd01c9473c63be4e3b6 ]
Andrey Konovalov reported the following warning while fuzzing the kernel
with syzkaller:
WARNING: kernel stack regs at ffff8800686869f8 in a.out:4933 has bad 'bp' value c3fc855a10167ec0
The unwinder dump revealed that RBP had a bad value when an interrupt
occurred in csum_partial_copy_generic().
That function saves RBP on the stack and then overwrites it, using it as
a scratch register. That's problematic because it breaks stack traces
if an interrupt occurs in the middle of the function.
Replace the usage of RBP with another callee-saved register (R15) so
stack traces are no longer affected.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: linux-sctp@vger.kernel.org
Cc: netdev <netdev@vger.kernel.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Link: http://lkml.kernel.org/r/4b03a961efda5ec9bfe46b7b9c9ad72d1efad343.1493909486.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 758929005f06f954b7e1c87a1c9fdb44157b228f ]
Function devm_regmap_init_mmio() returns an ERR_PTR on error. However,
in function snvs_rtc_probe() its return value is checked against NULL.
This patch fixes it by checking the return value with IS_ERR().
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3d05f3aed5d721c2c77d20288c29ab26c6193ed5 ]
On mainline, there is no functional difference, just less code, and
symmetric lock/unlock paths.
On PREEMPT_RT builds, this fixes the following warning, seen by
Alexander GQ Gerasiov, due to the sleeping nature of spinlocks.
BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:993
in_atomic(): 0, irqs_disabled(): 1, pid: 58, name: kworker/u12:1
CPU: 5 PID: 58 Comm: kworker/u12:1 Tainted: G W 4.9.20-rt16-stand6-686 #1
Hardware name: Supermicro SYS-5027R-WRF/X9SRW-F, BIOS 3.2a 10/28/2015
Workqueue: writeback wb_workfn (flush-253:0)
Call Trace:
dump_stack+0x47/0x68
? migrate_enable+0x4a/0xf0
___might_sleep+0x101/0x180
rt_spin_lock+0x17/0x40
add_stripe_bio+0x4e3/0x6c0 [raid456]
? preempt_count_add+0x42/0xb0
raid5_make_request+0x737/0xdd0 [raid456]
Reported-by: Alexander GQ Gerasiov <gq@redlab-i.ru>
Tested-by: Alexander GQ Gerasiov <gq@redlab-i.ru>
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 842be75c77cb72ee546a2b19da9c285fb3ded660 ]
Due to the way I did the RX bitrate conversions in mac80211 with
spatch, going setting flags to setting the value, many drivers now
don't set the bandwidth value for 20 MHz, since with the flags it
wasn't necessary to (there was no 20 MHz flag, only the others.)
Rather than go through and try to fix up all the drivers, instead
renumber the enum so that 20 MHz, which is the typical bandwidth,
actually has the value 0, making those drivers all work again.
If VHT was hit used with a driver not reporting it, e.g. iwlmvm,
this manifested in hitting the bandwidth warning in
cfg80211_calculate_bitrate_vht().
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull f2fs update from Jaegeuk Kim:
"In this round, we've mainly focused on performance tuning and critical
bug fixes occurred in low-end devices. Sheng Yong introduced
lost_found feature to keep missing files during recovery instead of
thrashing them. We're preparing coming fsverity implementation. And,
we've got more features to communicate with users for better
performance. In low-end devices, some memory-related issues were
fixed, and subtle race condtions and corner cases were addressed as
well.
Enhancements:
- large nat bitmaps for more free node ids
- add three block allocation policies to pass down write hints given by user
- expose extension list to user and introduce hot file extension
- tune small devices seamlessly for low-end devices
- set readdir_ra by default
- give more resources under gc_urgent mode regarding to discard and cleaning
- introduce fsync_mode to enforce posix or not
- nowait aio support
- add lost_found feature to keep dangling inodes
- reserve bits for future fsverity feature
- add test_dummy_encryption for FBE
Bug fixes:
- don't use highmem for dentry pages
- align memory boundary for bitops
- truncate preallocated blocks in write errors
- guarantee i_times on fsync call
- clear CP_TRIMMED_FLAG correctly
- prevent node chain loop during recovery
- avoid data race between atomic write and background cleaning
- avoid unnecessary selinux violation warnings on resgid option
- GFP_NOFS to avoid deadlock in quota and read paths
- fix f2fs_skip_inode_update to allow i_size recovery
In addition to the above, there are several minor bug fixes and clean-ups"
Cherry-pick from origin/upstream-f2fs-stable-linux-4.4.y:
42bf67fc54 f2fs: remain written times to update inode during fsync
6cb5aa02bf f2fs: make assignment of t->dentry_bitmap more readable
a8d07f1f9c f2fs: truncate preallocated blocks in error case
86444d6006 f2fs: fix a wrong condition in f2fs_skip_inode_update
db2188a687 f2fs: reserve bits for fs-verity
ee2e74b3f0 f2fs: Add a segment type check in inplace write
0192e0a450 f2fs: no need to initialize zero value for GFP_F2FS_ZERO
49338842e9 f2fs: don't track new nat entry in nat set
d6a69d5e65 f2fs: clean up with F2FS_BLK_ALIGN
2c8834a7a2 f2fs: check blkaddr more accuratly before issue a bio
6ab573a9d9 f2fs: Set GF_NOFS in read_cache_page_gfp while doing f2fs_quota_read
7419dcb8be f2fs: introduce a new mount option test_dummy_encryption
9321e22c03 f2fs: introduce F2FS_FEATURE_LOST_FOUND feature
8a57196158 f2fs: release locks before return in f2fs_ioc_gc_range()
739ace131c f2fs: align memory boundary for bitops
4c55abe4f8 f2fs: remove unneeded set_cold_node()
30654507e0 f2fs: add nowait aio support
d909e94106 f2fs: wrap all options with f2fs_sb_info.mount_opt
5738be52b3 f2fs: Don't overwrite all types of node to keep node chain
0bdeb167c8 f2fs: introduce mount option for fsync mode
6bc490f0ee f2fs: fix to restore old mount option in ->remount_fs
0c9c3e0344 f2fs: wrap sb_rdonly with f2fs_readonly
6c6611223a f2fs: avoid selinux denial on CAP_SYS_RESOURCE
076a6f32fe f2fs: support hot file extension
58edcdbca6 f2fs: fix to avoid race in between atomic write and background GC
1e0aeb0af9 f2fs: do gc in greedy mode for whole range if gc_urgent mode is set
10b2d001d6 f2fs: issue discard aggressively in the gc_urgent mode
a5052f32b9 f2fs: set readdir_ra by default
1aa536a624 f2fs: add auto tuning for small devices
0ffdffc8f1 f2fs: add mount option for segment allocation policy
b798298912 f2fs: don't stop GC if GC is contended
766d232169 f2fs: expose extension_list sysfs entry
98b329de50 f2fs: fix to set KEEP_SIZE bit in f2fs_zero_range
4d409fa334 f2fs: introduce sb_lock to make encrypt pwsalt update exclusive
1f6bac14c1 f2fs: remove redundant initialization of pointer 'p'
946aefc754 f2fs: flush cp pack except cp pack 2 page at first
e5081a52ac f2fs: clean up f2fs_sb_has_xxx functions
a292477154 f2fs: remove redundant check of page type when submit bio
190e64a819 f2fs: fix to handle looped node chain during recovery
889d980876 f2fs: handle quota for orphan inodes
92b12bb1a2 f2fs: support passing down write hints to block layer with F2FS policy
22fa74c2b0 f2fs: support passing down write hints given by users to block layer
180900373e f2fs: fix to clear CP_TRIMMED_FLAG
0671fae134 f2fs: support large nat bitmap
eceb943d5d f2fs: fix to check extent cache in f2fs_drop_extent_tree
2e2a339c98 f2fs: restrict inline_xattr_size configuration
41dda11641 f2fs: fix heap mode to reset it back
39575737bb f2fs: fix potential corruption in area before F2FS_SUPER_OFFSET
7e0e7995ee fscrypt: fix build with pre-4.6 gcc versions
31d3279a4f fscrypt: fix up fscrypt_fname_encrypted_size() for internal use
82bec88856 fscrypt: define fscrypt_fname_alloc_buffer() to be for presented names
168a907828 fscrypt: calculate NUL-padding length in one place only
042ae9f4cf fscrypt: move fscrypt_symlink_data to fscrypt_private.h
f9550c24c2 fscrypt: remove fscrypt_fname_usr_to_disk()
7ac4756a24 f2fs: switch to fscrypt_get_symlink()
6b76f58e24 f2fs: switch to fscrypt ->symlink() helper functions
fd457d2c4e fscrypt: new helper function - fscrypt_get_symlink()
a1cdacb7ae fscrypt: new helper functions for ->symlink()
7f43602f4d fscrypt: trim down fscrypt.h includes
d9cadc11bd fscrypt: move fscrypt_is_dot_dotdot() to fs/crypto/fname.c
e6fe930580 fscrypt: move fscrypt_valid_enc_modes() to fscrypt_private.h
efefa434f4 fscrypt: move fscrypt_operations declaration to fscrypt_supp.h
7ed178bc8a fscrypt: split fscrypt_dummy_context_enabled() into supp/notsupp versions
3f16e09dad fscrypt: move fscrypt_ctx declaration to fscrypt_supp.h
8216a0b51a fscrypt: move fscrypt_info_cachep declaration to fscrypt_private.h
dfe0b3b1b6 fscrypt: move fscrypt_control_page() to supp/notsupp headers
3a2c791778 fscrypt: move fscrypt_has_encryption_key() to supp/notsupp headers
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAlrJ5kIACgkQONu9yGCS
aT5KzBAAngMB1SWSsr5BFdDMJ+hr8pWpmNiZYOrAUgc+DqTxCqI4DSc1xVroeZf3
HeL2p/hqQfrBeKGsff3a67o3iJi3irCIkZY9wR1x1o7hssPPpvKMfjh2Grde/Heo
TrxdtpZam2yt8A2WHFkbqfdWoo19Rmb4L7rNcthk4U2Ya+UxiI5oW2E6VNPd0pcM
p+tvneRuh7zZmJffI9IYz6eaSHWXe6txr/5lPf6i4wsWyK5IdWNnGegtXqNkyN5O
OumvKJZTYp6+2YS7ORGrDBtZO2oLnJSCc1XMjQNfc6VkQ94moMFMMSC6o5dWjxJ4
OtRvZ85N+NeetszDp0Koqe4DsXzdiI4O8skVaS3H7AsC9IyG7u89+RBCjYRYgERm
yUclnLiZysU1foCH6jP+fO2Tg0uGdV5Xv1eK9IyHfdxxfMUWeXtKnn3pkD9RgxP0
XdOEaG2cH3AJTvBzsagYQ9woWr/yIluN2BtMDhd7L80JiVZzDatDUJLoeGVZNj3Z
dw3O/vKmZEDAB/rbtiiNZDSpxRtAjuC23yDRzoUuc0s76HfeRK344qrQcChNofsQ
3QYpY+HoSmPbdqvbnP+o3otWS01rY4nOlw3Dd0gFAnYgVPahVDN1I9PUVe47vbKX
vph82ZUrUJpAGm2JmHUTLOZMAEgHRH26gG5lsXsRG+TvFV1bUuA=
=nbr3
-----END PGP SIGNATURE-----
Merge 4.4.127 into android-4.4
Changes in 4.4.127
mtd: jedec_probe: Fix crash in jedec_read_mfr()
ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent()
ALSA: pcm: potential uninitialized return values
perf/hwbp: Simplify the perf-hwbp code, fix documentation
partitions/msdos: Unable to mount UFS 44bsd partitions
usb: gadget: define free_ep_req as universal function
usb: gadget: change len to size_t on alloc_ep_req()
usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_align
usb: gadget: align buffer size when allocating for OUT endpoint
usb: gadget: f_hid: fix: Prevent accessing released memory
kprobes/x86: Fix to set RWX bits correctly before releasing trampoline
ACPI, PCI, irq: remove redundant check for null string pointer
writeback: fix the wrong congested state variable definition
PCI: Make PCI_ROM_ADDRESS_MASK a 32-bit constant
dm ioctl: remove double parentheses
Input: mousedev - fix implicit conversion warning
netfilter: nf_nat_h323: fix logical-not-parentheses warning
genirq: Use cpumask_available() for check of cpumask variable
cpumask: Add helper cpumask_available()
selinux: Remove unnecessary check of array base in selinux_set_mapping()
fs: compat: Remove warning from COMPATIBLE_IOCTL
jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp
frv: declare jiffies to be located in the .data section
audit: add tty field to LOGIN event
tty: provide tty_name() even without CONFIG_TTY
netfilter: ctnetlink: Make some parameters integer to avoid enum mismatch
selinux: Remove redundant check for unknown labeling behavior
arm64: avoid overflow in VA_START and PAGE_OFFSET
xfrm_user: uncoditionally validate esn replay attribute struct
RDMA/ucma: Check AF family prior resolving address
RDMA/ucma: Fix use-after-free access in ucma_close
RDMA/ucma: Ensure that CM_ID exists prior to access it
RDMA/ucma: Check that device is connected prior to access it
RDMA/ucma: Check that device exists prior to accessing it
RDMA/ucma: Don't allow join attempts for unsupported AF family
RDMA/ucma: Introduce safer rdma_addr_size() variants
net: xfrm: use preempt-safe this_cpu_read() in ipcomp_alloc_tfms()
xfrm: Refuse to insert 32 bit userspace socket policies on 64 bit systems
netfilter: bridge: ebt_among: add more missing match size checks
netfilter: x_tables: add and use xt_check_proc_name
Bluetooth: Fix missing encryption refresh on Security Request
llist: clang: introduce member_address_is_nonnull()
scsi: virtio_scsi: always read VPD pages for multiqueue too
usb: dwc2: Improve gadget state disconnection handling
USB: serial: ftdi_sio: add RT Systems VX-8 cable
USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
USB: serial: cp210x: add ELDAT Easywave RX09 id
mei: remove dev_err message on an unsupported ioctl
media: usbtv: prevent double free in error case
parport_pc: Add support for WCH CH382L PCI-E single parallel port card.
crypto: ahash - Fix early termination in hash walk
crypto: x86/cast5-avx - fix ECB encryption when long sg follows short one
fs/proc: Stop trying to report thread stacks
staging: comedi: ni_mio_common: ack ai fifo error interrupts.
Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list
Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad
vt: change SGR 21 to follow the standards
Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition
ARM: dts: dra7: Add power hold and power controller properties to palmas
ARM: dts: am57xx-beagle-x15-common: Add overide powerhold property
md/raid10: reset the 'first' at the end of loop
net: hns: Fix ethtool private flags
nospec: Move array_index_nospec() parameter checking into separate macro
nospec: Kill array_index_nospec_mask_check()
Revert "PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()"
Revert "ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin"
Revert "ARM: dts: omap3-n900: Fix the audio CODEC's reset pin"
Revert "cpufreq: Fix governor module removal race"
Revert "mtip32xx: use runtime tag to initialize command header"
spi: davinci: fix up dma_mapping_error() incorrect patch
net: cavium: liquidio: fix up "Avoid dma_unmap_single on uninitialized ndata"
Revert "ip6_vti: adjust vti mtu according to mtu of lower device"
Linux 4.4.127
Change-Id: Ia3b9ed0a5b2ea6c682386dbee5337ed8413d1a53
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit 2fe832c678 which is
commit 53c81e95df1793933f87748d36070a721f6cb287 upstream.
Ben writes that there are a number of follow-on patches needed to fix
this up, but they get complex to backport, and some custom fixes are
needed, so let's just revert this and wait for a "real" set of patches
to resolve this to be submitted if it is really needed.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Petr Vorel <pvorel@suse.cz>
Cc: Alexey Kodanev <alexey.kodanev@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes up commit 1d1cb76252 which was
commit 8e6ce7ebeb34f0992f56de078c3744fb383657fa upstream.
Ben writes:
This goto should not have been changed, as no DMA mapping has been
attempted at this point in the function.
This seems to have been fixed upstream by commit 6a885b60dad2 "liquidio:
Introduce new octeon2/3 header". I leave it to you to work out how it
should be fixed in 4.4-stable.
Fix this up by hand, as the referenced patch isn't worthy of being
backported.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11dd9e2c48, which is commit
c5a2a394835f473ae23931eda5066d3771d7b2f8 upstream had an error in it.
Ben writes:
The '!' needs to be deleted. This appears to have been fixed upstream
by:
commit 8aedbf580d21121d2a032e4c8ea12d8d2d85e275
Author: Fabien Parent <fparent@baylibre.com>
Date: Thu Feb 23 19:01:56 2017 +0100
spi: davinci: Use SPI framework to handle DMA mapping
which is not suitable for stable.
So I'm just fixing this up directly.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 9bf9e352ed which was
commit a4e84aae8139aca9fbfbced1f45c51ca81b57488 upstream.
Ben writes:
MQ IO schedulers were introduced in 4.11, so this shouldn't be
needed in older branches. It also causes a performance
regression (fixed upstream). Please revert this for 4.4 and
4.9.
So let's revert it!
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3f7dfb7fcf which was
commit a8b149d32b663c1a4105273295184b78f53d33cf upstream.
The backport was not correct, so just drop it entirely.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ffa0a82528 which was
commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 upstream.
It requires a driver that was not merged until 4.16, so remove it from
this stable tree as it is pointless.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 59df934af7 which was
comit e153db03c6b7a035c797bcdf35262586f003ee93 upstream.
It requires a driver that was not merged until 4.16, so remove it from
this stable tree as it is pointless.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 4fbe422076 which was
commit fda78d7a0ead144f4b2cdb582dcba47911f4952c upstream.
The dependancy tree is just too messy here, just drop it from this
kernel as it's not really needed here.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: David Arcari <darcari@redhat.com>
Cc: Myron Stowe <mstowe@redhat.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d91c1d2c80cb70e2e553845e278b87a960c04da upstream.
There are multiple problems with the dynamic sanity checking in
array_index_nospec_mask_check():
* It causes unnecessary overhead in the 32-bit case since integer sized
@index values will no longer cause the check to be compiled away like
in the 64-bit case.
* In the 32-bit case it may trigger with user controllable input when
the expectation is that should only trigger during development of new
kernel enabling.
* The macro reuses the input parameter in multiple locations which is
broken if someone passes an expression like 'index++' to
array_index_nospec().
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/151881604278.17395.6605847763178076520.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fa80c503b484ddc1abbd10c7cb2ab81f3824a50 upstream.
For architectures providing their own implementation of
array_index_mask_nospec() in asm/barrier.h, attempting to use WARN_ONCE() to
complain about out-of-range parameters using WARN_ON() results in a mess
of mutually-dependent include files.
Rather than unpick the dependencies, simply have the core code in nospec.h
perform the checking for us.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1517840166-15399-1-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d61d263c8d82db7c4404a29ebc29674b1c0c05c9 upstream.
The driver implementation returns support for private flags, while
no private flags are present. When asked for the number of private
flags it returns the number of statistic flag names.
Fix this by returning EOPNOTSUPP for not implemented ethtool flags.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
