To avoid running into issues with the MMNOC RCG being enabled due
to an enable request from a non-linux entity whilst the linux code
has disabled its parents, park the RCG at CXO when its disabled.
Change-Id: Ib55bb7a202736a207bb8cb94c20b5030af5bea49
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
KTM right now won't update the mitigation frequency cap to LMH DCVSh if
all the cores in a cluster are offline. It will notify the LMH DCVSh
when at least one core is online. Due to race condition, there is a
possibility that this update can be missed or cores will be running
unmitigated for a short duration after being online.
LMH DCVSh hardware can accept the frequency cap even when the cores are
offline and apply the cap later when the cores are brought back online.
So in KTM update the LMH DCVSh hardware, even if the cores are offline
to avoid any race condition.
Change-Id: Idc04c35a9c5de66cfd8edb4150106ed65f9f4bf1
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Adding a check in gettimeofday api for timer rollover
condition.
Change-Id: I50c36e5983f05700e49987f6e24c1b17f38a9e1f
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Add new GPU ID: A508 and corresponding VBIF and initial
settings on SDM630.
Change-Id: If1cd782beb50098a69a9d05acb083ef4b0465766
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
TZ is called to restore key configuration in case of UFS reset
Change-Id: Id434e7f9ec6befdce97f52fd350957b66adcb15f
Signed-off-by: Andrey Markovytch <andreym@codeaurora.org>
Null terminate cpr4_mmss_regulator_match_table with
'{}', to fix the error reported from KASAN.
Change-Id: Ib991fe5ce57e9e12132c3c836e1e807cb0afad22
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Add proper status flag in wcn3990 wlan module device node to
enable the ath10k SNOC platform driver probe for the APQ8998
target. The wcn3990 wlan module doesn't have any register
resource to request so remove invalid register base address
from the device node handle.
CRs-Fixed: 2003852
Change-Id: I554063ac8d8da3c4bbca29a2ba8e216323c7a9e0
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Slimbus is used as audio transport for Bluetooth & FM between sdm630 &
wcn3990. Add device tree entry for wcn3990 slimbus slave device in sdm630.
Change-Id: Ie5ee241e0a952b61e84682a289c69d10877cedd1
Signed-off-by: Rupesh Tatiya <rtatiya@codeaurora.org>
Enable CONFIG_FREE_PAGES_RDONLY for 32bit sdm660, that
marks freed kernel pages as read-only.
Change-Id: I532dc10fc6aee5200275550eb1df7d1e6cf195e9
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
CONFIG_FREE_PAGES_RDONLY, which marks freed kernel pages
as read-only missed the Kconfig and an interface to mark
pages as read-only for 32 bit system. Add them.
Change-Id: Ibb5020a44323fb50febd66e16ca448da8ecb352c
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
Align arm32 and arm64 sdm660 defconfig with respect to
iommu configs and remove cma size selection as it is to be
moved to device tree.
Change-Id: I5c5f88c05dce9f58d29d56d9cfea2b0d785d665a
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
CTS malloc tests on Android 'N' expects higher entropy in
mmap returned address. Present value of mmap random bits
is not providing enough variations for 32 bit tasks.
Increase mmap_rnd_bits for 32bit and mmap_rnd_compat_bits
for 64bit targets to value of 16.
Change-Id: I1cb88cb1f1fc2a8dc7e27eb54b8c0b2a3eb37843
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
CONFIG_RODATA allows strict kernel mapping permissions to
be followed and accordingly maps regions as read-only,
not-executable etc. correspondingly. CONFIG_RODATA however
assumes all memory regions to be SECTION_SIZE aligned and
section mapped for performance reasons.
With CONFIG_FORCE_PAGES, we force all kernel mappings as
page mapped thus breaking CONFIG_RODATA.
Provide provision to apply permissions at page (pte)
level, if CONFIG_RODATA does not find section mapping.
Change-Id: I8dbf5c3741836bc63a231d8a471cf0306662993b
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
sched_group_upmigrate tunable can accept values greater than
100%. Don't limit it to 100% while doing the auto adjustment.
Change-Id: I3d1c1e84f2f4dec688235feb1536b9261a3e808b
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
If disconnect happens before connect_work start executing, then
there is a chance that connect_work returns with port_usb NULL.
Due to this, port->is_connected will be NULL and disconnect_work
returns with this check, but not decremented pm_usage count, which
is incremented before scheduling connect_work in ipa_data_connect.
Hence fix this by decrementing pm_usage count in connect_work if
port_usb is NULL.
Change-Id: Ic60f2addcf07375429e0858d3c7a376a35132750
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Use NOM ACC settings up to TURBO voltage corner for APC0/1 for
sdm660.
CRs-Fixed: 2003900
Change-Id: Id1c82a7e1681e028d0426fe0565d88faa6588ab5
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
The highmem code provides kmap_flush_unused to ensure all kmap
mappings are really removed if they are unused. This code does not
handle kmap_atomic mappings since they are managed separately.
This prevents an issue for any code which relies on having absolutely
no mappings for a particular page. Rather than pay the penalty of
having CONFIG_DEBUG_HIGHMEM on all the time, add functionality
to remove the kmap_atomic mappings in a similar way to kmap_flush_unused.
Change-Id: Ieb25da809b377b1fae1629e2cb75f8aebc1c1bca
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Configure the size of the default CMA region to 32 MB in
DT for sdm630.
Configuring the default CMA region in the DT is cleaner
than using CONFIG_CMA_SIZE_MBYTES since it is easier to
configure per target and the alloc ranges can be specified
in DT.
Change-Id: I329ae0aa9cffeed7c30e44749c15fbb83c58b599
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
This config is already enabled in all other variants but missed
in the 32 bit debug defconfig.
Change-Id: I7b1cb538eaf63305eba171c7453c1459c802eb41
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Power supply framework expects all registered power_supply
entities(except "battery" psy) to support ONLINE property.
"usb-main" psy doesn't support ONLINE property and prints
error for unsupported properties in get_property function.
Update error prints to debug in get-property function of
"usb-main" to prevent log flooding.
Change-Id: I270a93fe2e48d368f13e74e63c48613c1a4fb693
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
