* refs/heads/tmp-24ac44d
Linux 4.4.66
ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
ARCv2: save r30 on kernel entry as gcc uses it for code-gen
nfsd: check for oversized NFSv2/v3 arguments
Input: i8042 - add Clevo P650RS to the i8042 reset list
p9_client_readdir() fix
MIPS: Avoid BUG warning in arch_check_elf
MIPS: KGDB: Use kernel context for sleeping threads
ALSA: seq: Don't break snd_use_lock_sync() loop by timeout
ALSA: firewire-lib: fix inappropriate assignment between signed/unsigned type
ipv6: check raw payload size correctly in ioctl
ipv6: check skb->protocol before lookup for nexthop
macvlan: Fix device ref leak when purging bc_queue
ip6mr: fix notification device destruction
netpoll: Check for skb->queue_mapping
net: ipv6: RTF_PCPU should not be settable from userspace
dp83640: don't recieve time stamps twice
tcp: clear saved_syn in tcp_disconnect()
sctp: listen on the sock only when it's state is listening or closed
net: ipv4: fix multipath RTM_GETROUTE behavior when iif is given
l2tp: fix PPP pseudo-wire auto-loading
l2tp: take reference on sessions being dumped
net/packet: fix overflow in check for tp_reserve
net/packet: fix overflow in check for tp_frame_nr
l2tp: purge socket queues in the .destruct() callback
net: phy: handle state correctly in phy_stop_machine
net: neigh: guard against NULL solicit() method
sparc64: Fix kernel panic due to erroneous #ifdef surrounding pmd_write()
sparc64: kern_addr_valid regression
xen/x86: don't lose event interrupts
usb: gadget: f_midi: Fixed a bug when buflen was smaller than wMaxPacketSize
regulator: core: Clear the supply pointer if enabling fails
RDS: Fix the atomicity for congestion map update
net_sched: close another race condition in tcf_mirred_release()
net: cavium: liquidio: Avoid dma_unmap_single on uninitialized ndata
MIPS: Fix crash registers on non-crashing CPUs
md:raid1: fix a dead loop when read from a WriteMostly disk
ext4: check if in-inode xattr is corrupted in ext4_expand_extra_isize_ea()
drm/amdgpu: fix array out of bounds
crypto: testmgr - fix out of bound read in __test_aead()
clk: sunxi: Add apb0 gates for H3
ARM: OMAP2+: timer: add probe for clocksources
xc2028: unlock on error in xc2028_set_config()
f2fs: do more integrity verification for superblock
net: pppolac/pppopns: Add back the msg_flags
Conflicts:
drivers/regulator/core.c
Change-Id: I8e7b279efa442a0338ee735d27ff3ebe866a8dee
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
This reverts commit 566b44214c (smb138x:
introduce support for smb1355).
This is not required since smb1355 support is moved to its own driver.
Change-Id: Ibad8595c09a865e273adb6f30d6a75f931220131
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
This reverts commit 0f0e36134d ("smb138x:
use chg src bit to disable parallel charger)
This is not required, since smb1355 support is moved to its own driver.
Change-Id: I1bd454030d29195f03be132d167ec8294169b9d5
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Support faking input current limited state. This is very helpful
in testing/debugging the software based vbus changing algorithms.
Change-Id: I7cf548c94397ee680c9d65343c49ec7b16873e88
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Add POWER_SUPPLY_PROP_REAL_TYPE property for usb_psy to present its real
charger type. POWER_SUPPLY_PROP_TYPE in usb_psy is always set to
POWER_SUPPLY_TYPE_USB_PD for healthd to recognize it as an AC charger.
Also add usb_port_psy with POWER_SUPPLY_TYPE_USB type is added for healthd
to recognize it as an USB host. Their ONLINE properties will be updated
according to the VBUS status, type-c mode and real charger type.
With this type being set statically, update the usb phy and pd policy
engine code to look at real type.
Change-Id: I90aa69325cc82b09dfb513c0eeecbc61e092a57f
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Current driver implementation uses global variables to create
minidump elf header.
Move all elf global variables into a structure, and also replace
'msm_minidump_enabled' API with 'minidump_enabled' global variable.
And also add minidump_table address in elf, which would be useful
for parsers to get memory dump table addresses without vmlinux symbols.
Change-Id: I8829d88ce234179f429ae9537a3582df794c2cdf
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Current implementation uses pr_info to print error messages.
Update driver prints log level with pr_err instead of
pr_info, and also update with proper error number for
minidump table update failure return.
Change-Id: I27667715c71b361b9ee0f7856c94242d3ca21014
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=eMmm
-----END PGP SIGNATURE-----
Merge 4.4.66 into android-4.4
Changes in 4.4.66:
f2fs: do more integrity verification for superblock
xc2028: unlock on error in xc2028_set_config()
ARM: OMAP2+: timer: add probe for clocksources
clk: sunxi: Add apb0 gates for H3
crypto: testmgr - fix out of bound read in __test_aead()
drm/amdgpu: fix array out of bounds
ext4: check if in-inode xattr is corrupted in ext4_expand_extra_isize_ea()
md:raid1: fix a dead loop when read from a WriteMostly disk
MIPS: Fix crash registers on non-crashing CPUs
net: cavium: liquidio: Avoid dma_unmap_single on uninitialized ndata
net_sched: close another race condition in tcf_mirred_release()
RDS: Fix the atomicity for congestion map update
regulator: core: Clear the supply pointer if enabling fails
usb: gadget: f_midi: Fixed a bug when buflen was smaller than wMaxPacketSize
xen/x86: don't lose event interrupts
sparc64: kern_addr_valid regression
sparc64: Fix kernel panic due to erroneous #ifdef surrounding pmd_write()
net: neigh: guard against NULL solicit() method
net: phy: handle state correctly in phy_stop_machine
l2tp: purge socket queues in the .destruct() callback
net/packet: fix overflow in check for tp_frame_nr
net/packet: fix overflow in check for tp_reserve
l2tp: take reference on sessions being dumped
l2tp: fix PPP pseudo-wire auto-loading
net: ipv4: fix multipath RTM_GETROUTE behavior when iif is given
sctp: listen on the sock only when it's state is listening or closed
tcp: clear saved_syn in tcp_disconnect()
dp83640: don't recieve time stamps twice
net: ipv6: RTF_PCPU should not be settable from userspace
netpoll: Check for skb->queue_mapping
ip6mr: fix notification device destruction
macvlan: Fix device ref leak when purging bc_queue
ipv6: check skb->protocol before lookup for nexthop
ipv6: check raw payload size correctly in ioctl
ALSA: firewire-lib: fix inappropriate assignment between signed/unsigned type
ALSA: seq: Don't break snd_use_lock_sync() loop by timeout
MIPS: KGDB: Use kernel context for sleeping threads
MIPS: Avoid BUG warning in arch_check_elf
p9_client_readdir() fix
Input: i8042 - add Clevo P650RS to the i8042 reset list
nfsd: check for oversized NFSv2/v3 arguments
ARCv2: save r30 on kernel entry as gcc uses it for code-gen
ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
Linux 4.4.66
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We recently renamed CONFIG_UID_CPUTIME, but didn't update all the
defconfigs.
Change-Id: Ic52f904d6ada3d0e32a8278ec95f7b34b29f96b9
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Fix the compilation issue seen due to the regulator framework
changes from 3.10 to 4.4 kernel. Also remove the redundant error
messages during the memory allocation failures.
Change-Id: I4887c2d3acaff562fb41e6c2eaeb2c1ef2c1bde5
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
During Mini dump collection, cache dump needs extra memory
and time hence disable it in perf builds.
Change-Id: I68aae6edf676c27b8443fdcc88ece05fa3a26748
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
After cold boot calibration WLAN FW send pin connect result to
platform driver through qmi indication message. To avoid uninitialized
access of pin connect result structure member initialize it properly.
CRs-Fixed: 2042000
Change-Id: I5654583e890f9ee67ddcc632aecd9ecb8a160062
Signed-off-by: Hardik Kantilal Patel <hkpatel@codeaurora.org>
This patch helps dump the full 64k per ring preemption
record to GPU snapshot which is collected during GPU
recovery step. We use the general object snapshot section
type to store these records and we only collect the preemption
records if preemption was going to kick in, which is when
the number of rings is greater than one.
Change-Id: I1872bc14c6b39c8c4963ce9c98e96b03cbfec907
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
On 4.4 kernel, 'commit 364549ddc2 ("mmc: core: Remove
redundant ->power_restore() callback for MMC")' removed
power_restore callback for MMC since mmc_reset is
implemented. Hence use reset instead of power_restore in
mmc_cmdq_hw_reset. Also modify the caller function mmc_cmdq_hw_reset
to properly use the mmc_reset.
Change-Id: Ia06d579401b6a083b164dff7a253d1eb3caef1a3
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
The eMMC HW reset may be implemented either via the host ops ->hw_reset()
callback or through DT and the eMMC pwrseq. Additionally some eMMC cards
don't support HW reset.
To allow a reset to be done for the different combinations of mmc hosts
and eMMC/MMC cards, let's implement a fallback via trying a regular power
cycle. This improves the mmc block layer retry mechanism of failing I/O
requests.
Change-Id: I5cafd54327cde22ea9599543382f1b294272a42c
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
[Ulf: Rewrote changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Git-commit: 4e6c71788d6bb0e5438fc9211fa6e52dcca01474
Git-repo: git://git.linaro.org/people/ulf.hansson/mmc.git
[vviswana@codeaurora.org: resolve trivial merge conflicts]
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
This is snapshot of the OnSemi NCP6335D driver as of msm-3.10
'commit 156ba1726643 ("regulator: onsemi-ncp6335d: Add i2c retry logic")'.
Change-Id: I4cf0acd272fcf498462d4397385cd62f144eadf8
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
commit 34a477e5297cbaa6ecc6e17c042a866e1cbe80d6 upstream.
On x86-32, with CONFIG_FIRMWARE and multiple CPUs, if you enable function
graph tracing and then suspend to RAM, it will triple fault and reboot when
it resumes.
The first fault happens when booting a secondary CPU:
startup_32_smp()
load_ucode_ap()
prepare_ftrace_return()
ftrace_graph_is_dead()
(accesses 'kill_ftrace_graph')
The early head_32.S code calls into load_ucode_ap(), which has an an
ftrace hook, so it calls prepare_ftrace_return(), which calls
ftrace_graph_is_dead(), which tries to access the global
'kill_ftrace_graph' variable with a virtual address, causing a fault
because the CPU is still in real mode.
The fix is to add a check in prepare_ftrace_return() to make sure it's
running in protected mode before continuing. The check makes sure the
stack pointer is a virtual kernel address. It's a bit of a hack, but
it's not very intrusive and it works well enough.
For reference, here are a few other (more difficult) ways this could
have potentially been fixed:
- Move startup_32_smp()'s call to load_ucode_ap() down to *after* paging
is enabled. (No idea what that would break.)
- Track down load_ucode_ap()'s entire callee tree and mark all the
functions 'notrace'. (Probably not realistic.)
- Pause graph tracing in ftrace_suspend_notifier_call() or bringup_cpu()
or __cpu_up(), and ensure that the pause facility can be queried from
real mode.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net>
Cc: linux-acpi@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/5c1272269a580660703ed2eccf44308e790c7a98.1492123841.git.jpoimboe@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ecd43afdbe72017aefe48080631eb625e177ef4d upstream.
This is not exposed to userspace debugers yet, which can be done
independently as a seperate patch !
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6838a29ecb484c97e4efef9429643b9851fba6e upstream.
A client can append random data to the end of an NFSv2 or NFSv3 RPC call
without our complaining; we'll just stop parsing at the end of the
expected data and ignore the rest.
Encoded arguments and replies are stored together in an array of pages,
and if a call is too large it could leave inadequate space for the
reply. This is normally OK because NFS RPC's typically have either
short arguments and long replies (like READ) or long arguments and short
replies (like WRITE). But a client that sends an incorrectly long reply
can violate those assumptions. This was observed to cause crashes.
Also, several operations increment rq_next_page in the decode routine
before checking the argument size, which can leave rq_next_page pointing
well past the end of the page array, causing trouble later in
svc_free_pages.
So, following a suggestion from Neil Brown, add a central check to
enforce our expectation that no NFSv2/v3 call has both a large call and
a large reply.
As followup we may also want to rewrite the encoding routines to check
more carefully that they aren't running off the end of the page array.
We may also consider rejecting calls that have any extra garbage
appended. That would be safer, and within our rights by spec, but given
the age of our server and the NFS protocol, and the fact that we've
never enforced this before, we may need to balance that against the
possibility of breaking some oddball client.
Reported-by: Tuomas Haanpää <thaan@synopsys.com>
Reported-by: Ari Kauppi <ari@synopsys.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c5bb4ac2b76d2a09256aec8a7d584bf3e2b0466 upstream.
Clevo P650RS and other similar devices require i8042 to be reset in order
to detect Synaptics touchpad.
Reported-by: Paweł Bylica <chfast@gmail.com>
Tested-by: Ed Bordin <edbordin@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71d6ad08379304128e4bdfaf0b4185d54375423e upstream.
Don't assume that server is sane and won't return more data than
asked for.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c46f59e90226fa5bfcc83650edebe84ae47d454b upstream.
arch_check_elf contains a usage of current_cpu_data that will call
smp_processor_id() with preemption enabled and therefore triggers a
"BUG: using smp_processor_id() in preemptible" warning when an fpxx
executable is loaded.
As a follow-up to commit b244614a60ab ("MIPS: Avoid a BUG warning during
prctl(PR_SET_FP_MODE, ...)"), apply the same fix to arch_check_elf by
using raw_current_cpu_data instead. The rationale quoted from the previous
commit:
"It is assumed throughout the kernel that if any CPU has an FPU, then
all CPUs would have an FPU as well, so it is safe to perform the check
with preemption enabled - change the code to use raw_ variant of the
check to avoid the warning."
Fixes: 46490b5725 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks")
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15951/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 162b270c664dca2e0944308e92f9fcc887151a72 upstream.
KGDB is a kernel debug stub and it can't be used to debug userland as it
can only safely access kernel memory.
On MIPS however KGDB has always got the register state of sleeping
processes from the userland register context at the beginning of the
kernel stack. This is meaningless for kernel threads (which never enter
userland), and for user threads it prevents the user seeing what it is
doing while in the kernel:
(gdb) info threads
Id Target Id Frame
...
3 Thread 2 (kthreadd) 0x0000000000000000 in ?? ()
2 Thread 1 (init) 0x000000007705c4b4 in ?? ()
1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201
Get the register state instead from the (partial) kernel register
context stored in the task's thread_struct for resume() to restore. All
threads now correctly appear to be in context_switch():
(gdb) info threads
Id Target Id Frame
...
3 Thread 2 (kthreadd) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903
2 Thread 1 (init) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903
1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201
Call clobbered registers which aren't saved and exception registers
(BadVAddr & Cause) which can't be easily determined without stack
unwinding are reported as 0. The PC is taken from the return address,
such that the state presented matches that found immediately after
returning from resume().
Fixes: 8854700115 ("[MIPS] kgdb: add arch support for the kernel's kgdb core")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15829/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e7655fd4f47c23e5249ea260dc802f909a64611 upstream.
The snd_use_lock_sync() (thus its implementation
snd_use_lock_sync_helper()) has the 5 seconds timeout to break out of
the sync loop. It was introduced from the beginning, just to be
"safer", in terms of avoiding the stupid bugs.
However, as Ben Hutchings suggested, this timeout rather introduces a
potential leak or use-after-free that was apparently fixed by the
commit 2d7d54002e39 ("ALSA: seq: Fix race during FIFO resize"):
for example, snd_seq_fifo_event_in() -> snd_seq_event_dup() ->
copy_from_user() could block for a long time, and snd_use_lock_sync()
goes timeout and still leaves the cell at releasing the pool.
For fixing such a problem, we remove the break by the timeout while
still keeping the warning.
Suggested-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dfb00a56935186171abb5280b3407c3f910011f1 upstream.
An abstraction of asynchronous transaction for transmission of MIDI
messages was introduced in Linux v4.4. Each driver can utilize this
abstraction to transfer MIDI messages via fixed-length payload of
transaction to a certain unit address. Filling payload of the transaction
is done by callback. In this callback, each driver can return negative
error code, however current implementation assigns the return value to
unsigned variable.
This commit changes type of the variable to fix the bug.
Reported-by: Julia Lawall <Julia.Lawall@lip6.fr>
Fixes: 585d7cba5e ("ALSA: firewire-lib: add helper functions for asynchronous transactions to transfer MIDI messages")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 105f5528b9bbaa08b526d3405a5bcd2ff0c953c8 ]
In situations where an skb is paged, the transport header pointer and
tail pointer can be the same because the skb contents are in frags.
This results in ioctl(SIOCINQ/FIONREAD) incorrectly returning a
length of 0 when the length to receive is actually greater than zero.
skb->len is already correctly set in ip6_input_finish() with
pskb_pull(), so use skb->len as it always returns the correct result
for both linear and paged data.
Signed-off-by: Jamie Bainbridge <jbainbri@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 199ab00f3cdb6f154ea93fa76fd80192861a821d ]
Andrey reported a out-of-bound access in ip6_tnl_xmit(), this
is because we use an ipv4 dst in ip6_tnl_xmit() and cast an IPv4
neigh key as an IPv6 address:
neigh = dst_neigh_lookup(skb_dst(skb),
&ipv6_hdr(skb)->daddr);
if (!neigh)
goto tx_err_link_failure;
addr6 = (struct in6_addr *)&neigh->primary_key; // <=== HERE
addr_type = ipv6_addr_type(addr6);
if (addr_type == IPV6_ADDR_ANY)
addr6 = &ipv6_hdr(skb)->daddr;
memcpy(&fl6->daddr, addr6, sizeof(fl6->daddr));
Also the network header of the skb at this point should be still IPv4
for 4in6 tunnels, we shold not just use it as IPv6 header.
This patch fixes it by checking if skb->protocol is ETH_P_IPV6: if it
is, we are safe to do the nexthop lookup using skb_dst() and
ipv6_hdr(skb)->daddr; if not (aka IPv4), we have no clue about which
dest address we can pick here, we have to rely on callers to fill it
from tunnel config, so just fall to ip6_route_output() to make the
decision.
Fixes: ea3dc9601b ("ip6_tunnel: Add support for wildcard tunnel endpoints.")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
