Make change to improve input validation on request and response
buffers' address and length for qseecom_send_service_cmd.
Change-Id: I047e3264333d767541e43b7dadd1727232fd48ef
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Ignore MSA0 dump collection during graceful shutdown. Collect
ramdump only when modem is really crashed.
CRs-Fixed: 1110935
Change-Id: Ic2fbfec320eb516224daad9ae78be07c61376cfc
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Add an API that can trigger WLAN PDR. WLAN host driver can use
this API to trigger PDR in the cases where it fails to communicate
with FW over it's native copy engine interface.
CRs-Fixed: 1110381
Change-Id: I7a076ba023b3e48c9e5473ec4895f50c71816831
Signed-off-by: Sameer Thalappil <sameert@codeaurora.org>
Fix checkpatch warnings and other style issues in the regulator
debugfs functions. Refactor the code to remove unnecessary error
checks as well as a shared buffer and mutex. Rename variables
and functions to better follow the naming conventions found in
the core.c file. Update the conditions used for allowing the
creation of 'voltage' and 'load' debugfs files.
Change-Id: I59881078ce9e908de11e74d15372edf233eb17b0
Signed-off-by: David Collins <collinsd@codeaurora.org>
Add debugfs support of configuring fw features dynamically.
CRs-Fixed: 1107443
Change-Id: I0021ac61467174c794fa8f6ef130479b166c1425
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Add support of WLAN FW rejuvenation. After receiving FW
rejuvenate indication, ICNSS will start WLAN FW rejuvenation
and ack back to FW.
CRs-Fixed: 1107443
Change-Id: I127e86d8467f64534f096d58424e687d4231d7a5
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Update WLFW service with FW rejuvenate related messages.
These messages are used to trigger WLAN FW rejuvenation
and update FW dynamic feature mask to FW.
CRs-Fixed: 1107443
Change-Id: If91c78b5325b177195bdcb8159542d50bd0dd01d
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Save pdaf buf address in sof event and send it with stats
notify event.
Change-Id: If147a229f3f007f30ef563469d11b678b887ed57
Signed-off-by: Shubhraprakash Das <sadas@codeaurora.org>
Signed-off-by: Junzhe Zou <jnzhezou@codeaurora.org>
Existing SDE HW interrupt was based on mdp/kms and is not
sufficient for supporting the SDE HW interrupt manipulation.
Changes are for enabling full SDE interrupt support and hiding
HAL interface implementation details from crtc/encoder.
Change-Id: I917a153d12bbb6b84758591ba69fe15181af7791
Signed-off-by: Ben Chan <bkchan@codeaurora.org>
Signed-off-by: Krishna Srinivas Kundurthi <kskund@codeaurora.org>
Cleanup the display probing logic now that the common display
interface is available.
Change-Id: I3a6f815d8e7ab7f22e719eaf7ef4c8150470d54f
Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org>
Signed-off-by: Krishna Srinivas Kundurthi <kskund@codeaurora.org>
Call panels via common display-manager interface rather than directly.
Change-Id: I4fe86b6b206929217c0cf807a93287140d507e6c
Signed-off-by: Clarence Ip <cip@codeaurora.org>
Signed-off-by: Krishna Srinivas Kundurthi <kskund@codeaurora.org>
Add support in encoder for programming early fetch in the
vertical front porch.
Change-Id: I60fcf4a4e6aea80292b590ee14506579123f372d
Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org>
Signed-off-by: Krishna Srinivas Kundurthi <kskund@codeaurora.org>
Split SDE encoder into virtual and physical encoders. Virtual
encoders are containers, one per logical display that contain
one or more physical encoders. Physical encoders manage the
INTF hardware.
Change-Id: I6342511c59568c76278a519b84f93338157e59fa
Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org>
Signed-off-by: Krishna Srinivas Kundurthi <kskund@codeaurora.org>
Controller Instance ID differentiates between INTFs of the same type.
E.g. which DSI INTF is primary, which is secondary.
Change-Id: Icc47df59a24faa2a019ab190d6c835a0ac93024d
Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org>
Signed-off-by: Krishna Srinivas Kundurthi <kskund@codeaurora.org>
Implement basic crtc, encoder, and plane support that
implements DRM atomic call sequence, queries hardware, and
enumerates resources as DRM objects. This includes basic
color format support, as well as querying of displays
to create appropriate encoders, crtcs. Also includes
supporting clock control logic.
Change-Id: I25a9c74b92262d81986b3441c89d51bff2d14dbb
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Signed-off-by: Krishna Srinivas Kundurthi <kskund@codeaurora.org>
Add msm_smmu driver to support mapping buffers to
arm smmu memory. msm_smmu adds the hooks to support
drm hooks. Current change only supports the unsecure
domain memory. msm_gem object is also updated to attach
the new msm_smmu driver.
Change-Id: I4899bd74d8b41b864ed5e0dec2da11e929c7fa95
Signed-off-by: Adrian Salido-Moreno <adrianm@codeaurora.org>
Signed-off-by: Krishna Srinivas Kundurthi <kskund@codeaurora.org>
The change adds a synchronization mechanism to avoid concurrent
access to the TZ App.
CRs-Fixed: 1110588
Change-Id: I1ec37133eb7fe8c3fda498e6fe6661198163e07d
Signed-off-by: Alexander Kolesnikov <akolesni@codeaurora.org>
For all rpm clocks, max rate request is going to RPM
during handoff which always shows max requested rate
value from APSS so fix the same.
Change-Id: I4f184ea053fc1a40830eb9f555c24fdf17ba3fa1
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Update qrng block address and interrupt number for crypto hardware
for SDM660.
Change-Id: I5f0066a1d2086830747156d8c65746a2dac87feb
Signed-off-by: Brahmaji K <bkomma@codeaurora.org>
Enable watchdog node for sdm660 which is
used to detect system hang.
Change-Id: I463f7320a068b678370b295558689c37d8073fb7
CRs-fixed: 1056777
Signed-off-by: Amey Telawane <ameyt@codeaurora.org>
If download mode disabled, msm-poweroff driver compilation will
throw errors.
Fix them by moving download mode support under the flag.
Change-Id: I7a3f946d72cb4e500e3e762e4a6a5f2c8b90cb8c
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Add device nodes for I2C, SPI, UART and also Audio and QCA slimbus
which are disabled by default. Need to enable along with slave instances.
Change-Id: I8e9486b6774a993c14c1363adaa62435e8c0d58b
Signed-off-by: Shrey Vijay <shreyv@codeaurora.org>
For set rate, dp_pixel_clk_src rcg requires the correct parent
source to configured so add support for the same.
Change-Id: I9c8ae2904b47dbe0bc6845e2ca38fbd2f126a7e5
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Use correct property name for passing voltage values for voting
core_ldo which is required for QMP PHY.
Change-Id: I042905f5971c653f580a6f4388555744ff3160cc
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Update vdd-current-level as per latest hardware documentation
and interrupt related properties of sdhc2 for sdm660.
Change-Id: I93fa440bc7ae0f72cb19949fdb9e4c5f6322d253
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
There are few compiler errors and warnings when CFS_BANDWIDTH
config is enabled but not SCHED_HMP.
Change-Id: Idaf4a7364564b6faf56df2eb3a1a74eeb242d57e
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
HMP scheduler boost feature related functions are referred in SMP
load balancer. Add the nop functions for the same to fix the
compiler errors with !SCHED_HMP.
Change-Id: I1cbcf67f728c2cbc7c0f47e8eaf1f4165649dce8
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
PMI GPIO1 is used to enable and disable WLED for msm8998 QVR,
we should also invert the gpio level according to HW design.
CRs-Fixed: 1101647
Change-Id: If29e41d12a697d7fd6671f1134a1e798c80c3523
Signed-off-by: Yahui Wang <yahuiw@codeaurora.org>
Added attributes for forcing a buffer mapped as coherent or
non-coherent by using the DMA_ATTR_FORCE_COHERENT and
DMA_ATTR_FORCE_NON_COHERENT.
Change-Id: Ifecad81dd96b99ab63854bddce378ff775c22d38
Acked-by: Viswanatham Paduchuri <vpaduchu@qti.qualcomm.com>
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
This reverts commit c996cdd384 ("USB: rndis:
Free the rndis response queue during REMOTE_NDIS_RESET_MSG"). RNDIS host
sends GET_ENCAP_RESP for every RESP_AVAILABLE_NOTIFICATION from device.
As result if REMOTE_NDIS_RESET_MSG comes device rndis driver frees all the
previous responses and once notify request gets completed for previous
RNDIS request message it sends reset message completion resonse. When
response available request corresponding to RNDIS reset message gets
completed host RNDIS driver sends GET_ENCAP_RESP and device sends stall
because all RNDIS responses are freed due to RNDIS reset message.
Change-Id: I8a785d1ea8175c5c6aa08cda5cdd00cfd0c561b5
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
When SSR happens at WLAN driver, the cfg80211 stop AP can fail at driver.
Make sure that the beacon interval is reset, even when this API fails.
Change-Id: I459f55ce5f4bc44c4d0e20170bd50a83c2d609b4
Signed-off-by: Sameer Thalappil <sameert@codeaurora.org>
CRs-fixed: 1078172
When rotator job finished, driver needs to send out done signaling to
notify fbdev driver to perform a commit. However, there are occasions
that the SMMU disabling take quite long time and delaying the fbdev
commit time. To reduce this unpredict latency, move the SMMU disabling
much later in the rotator done handling, and also remove unnecessary
SMMU disabling call during commit phase.
CRs-Fixed: 1100633
Change-Id: I76ad017661aa6f760a2adc3579f59a7b66ab8e40
Signed-off-by: Benjamin Chan <bkchan@codeaurora.org>
If read function is waiting for interrupt and after that
NFCC goes to recovery, MW will call ioctl (0) and ioctl (1),
In ioctl (0) call we are disabling interrupt so read function
was waiting for interrupt and ioctl call has disabled interrupt,
now there is no possibility interrupt will be enabled again
because only read function enables the interrupt.
Enabled interrupt in ioctl (1) so that we can receive data
after reset/recovery.
Change-Id: I1677a50129534b1eaa4b8c20820a15db299cd9c1
Signed-off-by: Gaurav Singhal <gsinghal@codeaurora.org>
Vote minimum possible voltage corner on system regulator in
regulator disable path when the CPR controller manages an
underlying LDO of type LDO300.
Also, fix the regulator get failure print when vdd-supply
not specified for CPRh controllers.
CRs-Fixed: 1108988
Change-Id: Ic1c7b6fd4bf93dd213b2f639aa21b47890906478
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Properly initialize local variable in the SDE rotator WB done handler.
Under error condition, it is possible that the handler access the
uninitialized variable.
CRs-Fixed: 1110015
Change-Id: I4c76fd6400c528f5dd7773aa9b3718dd86b2b01a
Signed-off-by: Benjamin Chan <bkchan@codeaurora.org>
Some platforms don't configure qcom,secondary-pon-reset like 8998.
So set boot_reason when "qcom,system-reset" node exists to avoid
setting a wrong value to boot_reason.
CRs-Fixed: 1102732
Change-Id: I9e9ff2f2d0ffac6baa5d0663664001eb30638e87
Signed-off-by: Mao Jinlong <c_jmao@codeaurora.org>
Add IPA stats support on AP+STA mode for V2 driver
when CNE queries. Also add metering funtionality
on WIFI interface to stop the data transfer
when quota reached on WIFI-case.
Change-Id: I51a771423e6a35ea0453b978be484d0464bddf14
Acked-by: Chaitanya Pratapa <cpratapa@qti.qualcomm.com>
Signed-off-by: Utkarsh Saxena <usaxena@codeaurora.org>
