* msm-4.4/tmp-510d0a3f:
Linux 4.4.11
nf_conntrack: avoid kernel pointer value leak in slab name
drm/radeon: fix DP link training issue with second 4K monitor
drm/i915/bdw: Add missing delay during L3 SQC credit programming
drm/i915: Bail out of pipe config compute loop on LPT
drm/radeon: fix PLL sharing on DCE6.1 (v2)
Revert "[media] videobuf2-v4l2: Verify planes array in buffer dequeueing"
Input: max8997-haptic - fix NULL pointer dereference
get_rock_ridge_filename(): handle malformed NM entries
tools lib traceevent: Do not reassign parg after collapse_tree()
qla1280: Don't allocate 512kb of host tags
atomic_open(): fix the handling of create_error
regulator: axp20x: Fix axp22x ldo_io voltage ranges
regulator: s2mps11: Fix invalid selector mask and voltages for buck9
workqueue: fix rebind bound workers warning
ARM: dts: at91: sam9x5: Fix the memory range assigned to the PMC
vfs: rename: check backing inode being equal
vfs: add vfs_select_inode() helper
perf/core: Disable the event on a truncated AUX record
regmap: spmi: Fix regmap_spmi_ext_read in multi-byte case
pinctrl: at91-pio4: fix pull-up/down logic
spi: spi-ti-qspi: Handle truncated frames properly
spi: spi-ti-qspi: Fix FLEN and WLEN settings if bits_per_word is overridden
spi: pxa2xx: Do not detect number of enabled chip selects on Intel SPT
ALSA: hda - Fix broken reconfig
ALSA: hda - Fix white noise on Asus UX501VW headset
ALSA: hda - Fix subwoofer pin on ASUS N751 and N551
ALSA: usb-audio: Yet another Phoneix Audio device quirk
ALSA: usb-audio: Quirk for yet another Phoenix Audio devices (v2)
crypto: testmgr - Use kmalloc memory for RSA input
crypto: hash - Fix page length clamping in hash walk
crypto: qat - fix invalid pf2vf_resp_wq logic
s390/mm: fix asce_bits handling with dynamic pagetable levels
zsmalloc: fix zs_can_compact() integer overflow
ocfs2: fix posix_acl_create deadlock
ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang
net/route: enforce hoplimit max value
tcp: refresh skb timestamp at retransmit time
net: thunderx: avoid exposing kernel stack
net: fix a kernel infoleak in x25 module
uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h MIME-Version: 1.0
bridge: fix igmp / mld query parsing
net: bridge: fix old ioctl unlocked net device walk
VSOCK: do not disconnect socket when peer has shutdown SEND only
net/mlx4_en: Fix endianness bug in IPV6 csum calculation
net: fix infoleak in rtnetlink
net: fix infoleak in llc
net: fec: only clear a queue's work bit if the queue was emptied
netem: Segment GSO packets on enqueue
sch_dsmark: update backlog as well
sch_htb: update backlog as well
net_sched: update hierarchical backlog too
net_sched: introduce qdisc_replace() helper
gre: do not pull header in ICMP error processing
net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case
samples/bpf: fix trace_output example
bpf: fix check_map_func_compatibility logic
bpf: fix refcnt overflow
bpf: fix double-fdput in replace_map_fd_with_map_ptr()
net/mlx4_en: fix spurious timestamping callbacks
ipv4/fib: don't warn when primary address is missing if in_dev is dead
net/mlx5e: Fix minimum MTU
net/mlx5e: Device's mtu field is u16 and not int
openvswitch: use flow protocol when recalculating ipv6 checksums
atl2: Disable unimplemented scatter/gather feature
vlan: pull on __vlan_insert_tag error path and fix csum correction
net: use skb_postpush_rcsum instead of own implementations
cdc_mbim: apply "NDP to end" quirk to all Huawei devices
bpf/verifier: reject invalid LD_ABS | BPF_DW instruction
net: sched: do not requeue a NULL skb
packet: fix heap info leak in PACKET_DIAG_MCLIST sock_diag interface
route: do not cache fib route info on local routes with oif
decnet: Do not build routes to devices without decnet private data.
parisc: Use generic extable search and sort routines
arm64: kasan: Use actual memory node when populating the kernel image shadow
arm64: mm: treat memstart_addr as a signed quantity
arm64: lse: deal with clobbered IP registers after branch via PLT
arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly
arm64: kasan: Fix zero shadow mapping overriding kernel image shadow
arm64: consistently use p?d_set_huge
arm64: fix KASLR boot-time I-cache maintenance
arm64: hugetlb: partial revert of 66b3923a1a0f
arm64: make irq_stack_ptr more robust
arm64: efi: invoke EFI_RNG_PROTOCOL to supply KASLR randomness
efi: stub: use high allocation for converted command line
efi: stub: add implementation of efi_random_alloc()
efi: stub: implement efi_get_random_bytes() based on EFI_RNG_PROTOCOL
arm64: kaslr: randomize the linear region
arm64: add support for kernel ASLR
arm64: add support for building vmlinux as a relocatable PIE binary
arm64: switch to relative exception tables
extable: add support for relative extables to search and sort routines
scripts/sortextable: add support for ET_DYN binaries
arm64: futex.h: Add missing PAN toggling
arm64: make asm/elf.h available to asm files
arm64: avoid dynamic relocations in early boot code
arm64: avoid R_AARCH64_ABS64 relocations for Image header fields
arm64: add support for module PLTs
arm64: move brk immediate argument definitions to separate header
arm64: mm: use bit ops rather than arithmetic in pa/va translations
arm64: mm: only perform memstart_addr sanity check if DEBUG_VM
arm64: User die() instead of panic() in do_page_fault()
arm64: allow kernel Image to be loaded anywhere in physical memory
arm64: defer __va translation of initrd_start and initrd_end
arm64: move kernel image to base of vmalloc area
arm64: kvm: deal with kernel symbols outside of linear mapping
arm64: decouple early fixmap init from linear mapping
arm64: pgtable: implement static [pte|pmd|pud]_offset variants
arm64: introduce KIMAGE_VADDR as the virtual base of the kernel region
arm64: add support for ioremap() block mappings
arm64: prevent potential circular header dependencies in asm/bug.h
of/fdt: factor out assignment of initrd_start/initrd_end
of/fdt: make memblock minimum physical address arch configurable
arm64: Remove the get_thread_info() function
arm64: kernel: Don't toggle PAN on systems with UAO
arm64: cpufeature: Test 'matches' pointer to find the end of the list
arm64: kernel: Add support for User Access Override
arm64: add ARMv8.2 id_aa64mmfr2 boiler plate
arm64: cpufeature: Change read_cpuid() to use sysreg's mrs_s macro
arm64: use local label prefixes for __reg_num symbols
arm64: vdso: Mark vDSO code as read-only
arm64: ubsan: select ARCH_HAS_UBSAN_SANITIZE_ALL
arm64: ptdump: Indicate whether memory should be faulting
arm64: Add support for ARCH_SUPPORTS_DEBUG_PAGEALLOC
arm64: Drop alloc function from create_mapping
arm64: prefetch: add missing #include for spin_lock_prefetch
arm64: lib: patch in prfm for copy_page if requested
arm64: lib: improve copy_page to deal with 128 bytes at a time
arm64: prefetch: add alternative pattern for CPUs without a prefetcher
arm64: prefetch: don't provide spin_lock_prefetch with LSE
arm64: allow vmalloc regions to be set with set_memory_*
arm64: kernel: implement ACPI parking protocol
arm64: mm: create new fine-grained mappings at boot
arm64: ensure _stext and _etext are page-aligned
arm64: mm: allow passing a pgdir to alloc_init_*
arm64: mm: allocate pagetables anywhere
arm64: mm: use fixmap when creating page tables
arm64: mm: add functions to walk tables in fixmap
arm64: mm: add __{pud,pgd}_populate
arm64: mm: avoid redundant __pa(__va(x))
arm64: mm: add functions to walk page tables by PA
arm64: mm: move pte_* macros
arm64: kasan: avoid TLB conflicts
arm64: mm: add code to safely replace TTBR1_EL1
arm64: add function to install the idmap
arm64: unmap idmap earlier
arm64: unify idmap removal
arm64: mm: place empty_zero_page in bss
arm64: mm: specialise pagetable allocators
asm-generic: Fix local variable shadow in __set_fixmap_offset
Eliminate the .eh_frame sections from the aarch64 vmlinux and kernel modules
arm64: Fix an enum typo in mm/dump.c
arm64: kasan: ensure that the KASAN zero page is mapped read-only
arch/arm64/include/asm/pgtable.h: add pmd_mkclean for THP
arm64: hide __efistub_ aliases from kallsyms
Linux 4.4.10
drm/i915/skl: Fix DMC load on Skylake J0 and K0
lib/test-string_helpers.c: fix and improve string_get_size() tests
ACPI / processor: Request native thermal interrupt handling via _OSC
drm/i915: Fake HDMI live status
drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
drm/i915: Fix eDP low vswing for Broadwell
drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume
drm/radeon: make sure vertical front porch is at least 1
iio: ak8975: fix maybe-uninitialized warning
iio: ak8975: Fix NULL pointer exception on early interrupt
drm/amdgpu: set metadata pointer to NULL after freeing.
drm/amdgpu: make sure vertical front porch is at least 1
gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading
nvmem: mxs-ocotp: fix buffer overflow in read
USB: serial: cp210x: add Straizona Focusers device ids
USB: serial: cp210x: add ID for Link ECU
ata: ahci-platform: Add ports-implemented DT bindings.
libahci: save port map for forced port map
powerpc: Fix bad inline asm constraint in create_zero_mask()
ACPICA: Dispatcher: Update thread ID for recursive method calls
x86/sysfb_efi: Fix valid BAR address range check
ARC: Add missing io barriers to io{read,write}{16,32}be()
ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
propogate_mnt: Handle the first propogated copy being a slave
fs/pnode.c: treat zero mnt_group_id-s as unequal
x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
MAINTAINERS: Remove asterisk from EFI directory names
writeback: Fix performance regression in wb_over_bg_thresh()
batman-adv: Reduce refcnt of removed router when updating route
batman-adv: Fix broadcast/ogm queue limit on a removed interface
batman-adv: Check skb size before using encapsulated ETH+VLAN header
batman-adv: fix DAT candidate selection (must use vid)
mm: update min_free_kbytes from khugepaged after core initialization
proc: prevent accessing /proc/<PID>/environ until it's ready
Input: zforce_ts - fix dual touch recognition
HID: Fix boot delay for Creative SB Omni Surround 5.1 with quirk
HID: wacom: Add support for DTK-1651
xen/evtchn: fix ring resize when binding new events
xen/balloon: Fix crash when ballooning on x86 32 bit PAE
xen: Fix page <-> pfn conversion on 32 bit systems
ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernel
ARM: EXYNOS: Properly skip unitialized parent clock in power domain on
mm/zswap: provide unique zpool name
mm, cma: prevent nr_isolated_* counters from going negative
Minimal fix-up of bad hashing behavior of hash_64()
MD: make bio mergeable
tracing: Don't display trigger file for events that can't be enabled
mac80211: fix statistics leak if dev_alloc_name() fails
ath9k: ar5008_hw_cmn_spur_mitigate: add missing mask_m & mask_p initialisation
lpfc: fix misleading indentation
clk: qcom: msm8960: Fix ce3_src register offset
clk: versatile: sp810: support reentrance
clk: qcom: msm8960: fix ce3_core clk enable register
clk: meson: Fix meson_clk_register_clks() signature type mismatch
clk: rockchip: free memory in error cases when registering clock branches
soc: rockchip: power-domain: fix err handle while probing
clk-divider: make sure read-only dividers do not write to their register
CNS3xxx: Fix PCI cns3xxx_write_config()
mwifiex: fix corner case association failure
ata: ahci_xgene: dereferencing uninitialized pointer in probe
nbd: ratelimit error msgs after socket close
mfd: intel-lpss: Remove clock tree on error path
ipvs: drop first packet to redirect conntrack
ipvs: correct initial offset of Call-ID header search in SIP persistence engine
ipvs: handle ip_vs_fill_iph_skb_off failure
RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chips
Revert: "powerpc/tm: Check for already reclaimed tasks"
arm64: head.S: use memset to clear BSS
efi: stub: define DISABLE_BRANCH_PROFILING for all architectures
arm64: entry: remove pointless SPSR mode check
arm64: mm: move pgd_cache initialisation to pgtable_cache_init
arm64: module: avoid undefined shift behavior in reloc_data()
arm64: module: fix relocation of movz instruction with negative immediate
arm64: traps: address fallout from printk -> pr_* conversion
arm64: ftrace: fix a stack tracer's output under function graph tracer
arm64: pass a task parameter to unwind_frame()
arm64: ftrace: modify a stack frame in a safe way
arm64: remove irq_count and do_softirq_own_stack()
arm64: hugetlb: add support for PTE contiguous bit
arm64: Use PoU cache instr for I/D coherency
arm64: Defer dcache flush in __cpu_copy_user_page
arm64: reduce stack use in irq_handler
arm64: Documentation: add list of software workarounds for errata
arm64: mm: place __cpu_setup in .text
arm64: cmpxchg: Don't incldue linux/mmdebug.h
arm64: mm: fold alternatives into .init
arm64: Remove redundant padding from linker script
arm64: mm: remove pointless PAGE_MASKing
arm64: don't call C code with el0's fp register
arm64: when walking onto the task stack, check sp & fp are in current->stack
arm64: Add this_cpu_ptr() assembler macro for use in entry.S
arm64: irq: fix walking from irq stack to task stack
arm64: Add do_softirq_own_stack() and enable irq_stacks
arm64: Modify stack trace and dump for use with irq_stack
arm64: Store struct thread_info in sp_el0
arm64: Add trace_hardirqs_off annotation in ret_to_user
arm64: ftrace: fix the comments for ftrace_modify_code
arm64: ftrace: stop using kstop_machine to enable/disable tracing
arm64: spinlock: serialise spin_unlock_wait against concurrent lockers
arm64: enable HAVE_IRQ_TIME_ACCOUNTING
arm64: fix COMPAT_SHMLBA definition for large pages
arm64: add __init/__initdata section marker to some functions/variables
arm64: pgtable: implement pte_accessible()
arm64: mm: allow sections for unaligned bases
arm64: mm: detect bad __create_mapping uses
Linux 4.4.9
extcon: max77843: Use correct size for reading the interrupt register
stm class: Select CONFIG_SRCU
megaraid_sas: add missing curly braces in ioctl handler
sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race
thermal: rockchip: fix a impossible condition caused by the warning
unbreak allmodconfig KCONFIG_ALLCONFIG=...
jme: Fix device PM wakeup API usage
jme: Do not enable NIC WoL functions on S0
bus: imx-weim: Take the 'status' property value into account
ARM: dts: pxa: fix dma engine node to pxa3xx-nand
ARM: dts: armada-375: use armada-370-sata for SATA
ARM: EXYNOS: select THERMAL_OF
ARM: prima2: always enable reset controller
ARM: OMAP3: Add cpuidle parameters table for omap3430
ext4: fix races of writeback with punch hole and zero range
ext4: fix races between buffered IO and collapse / insert range
ext4: move unlocked dio protection from ext4_alloc_file_blocks()
ext4: fix races between page faults and hole punching
perf stat: Document --detailed option
perf tools: handle spaces in file names obtained from /proc/pid/maps
perf hists browser: Only offer symbol scripting when a symbol is under the cursor
mtd: nand: Drop mtd.owner requirement in nand_scan
mtd: brcmnand: Fix v7.1 register offsets
mtd: spi-nor: remove micron_quad_enable()
serial: sh-sci: Remove cpufreq notifier to fix crash/deadlock
ext4: fix NULL pointer dereference in ext4_mark_inode_dirty()
x86/mm/kmmio: Fix mmiotrace for hugepages
perf evlist: Reference count the cpu and thread maps at set_maps()
drivers/misc/ad525x_dpot: AD5274 fix RDAC read back errors
rtc: max77686: Properly handle regmap_irq_get_virq() error code
rtc: rx8025: remove rv8803 id
rtc: ds1685: passing bogus values to irq_restore
rtc: vr41xx: Wire up alarm_irq_enable
rtc: hym8563: fix invalid year calculation
PM / Domains: Fix removal of a subdomain
PM / OPP: Initialize u_volt_min/max to a valid value
misc: mic/scif: fix wrap around tests
misc/bmp085: Enable building as a module
lib/mpi: Endianness fix
fbdev: da8xx-fb: fix videomodes of lcd panels
scsi_dh: force modular build if SCSI is a module
paride: make 'verbose' parameter an 'int' again
regulator: s5m8767: fix get_register() error handling
irqchip/mxs: Fix error check of of_io_request_and_map()
irqchip/sunxi-nmi: Fix error check of of_io_request_and_map()
spi/rockchip: Make sure spi clk is on in rockchip_spi_set_cs
locking/mcs: Fix mcs_spin_lock() ordering
regulator: core: Fix nested locking of supplies
regulator: core: Ensure we lock all regulators
regulator: core: fix regulator_lock_supply regression
Revert "regulator: core: Fix nested locking of supplies"
videobuf2-v4l2: Verify planes array in buffer dequeueing
videobuf2-core: Check user space planes array in dqbuf
USB: usbip: fix potential out-of-bounds write
cgroup: make sure a parent css isn't freed before its children
mm/hwpoison: fix wrong num_poisoned_pages accounting
mm: vmscan: reclaim highmem zone if buffer_heads is over limit
numa: fix /proc/<pid>/numa_maps for THP
mm/huge_memory: replace VM_NO_THP VM_BUG_ON with actual VMA check
memcg: relocate charge moving from ->attach to ->post_attach
cgroup, cpuset: replace cpuset_post_attach_flush() with cgroup_subsys->post_attach callback
slub: clean up code for kmem cgroup support to kmem_cache_free_bulk
workqueue: fix ghost PENDING flag while doing MQ IO
x86/apic: Handle zero vector gracefully in clear_vector_irq()
efi: Expose non-blocking set_variable() wrapper to efivars
efi: Fix out-of-bounds read in variable_matches()
IB/security: Restrict use of the write() interface
IB/mlx5: Expose correct max_sge_rd limit
cxl: Keep IRQ mappings on context teardown
v4l2-dv-timings.h: fix polarity for 4k formats
vb2-memops: Fix over allocation of frame vectors
ASoC: rt5640: Correct the digital interface data select
ASoC: dapm: Make sure we have a card when displaying component widgets
ASoC: ssm4567: Reset device before regcache_sync()
ASoC: s3c24xx: use const snd_soc_component_driver pointer
EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callback
toshiba_acpi: Fix regression caused by hotkey enabling value
i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
i2c: cpm: Fix build break due to incompatible pointer types
perf intel-pt: Fix segfault tracing transactions
drm/i915: Use fw_domains_put_with_fifo() on HSW
drm/i915: Fixup the free space logic in ring_prepare
drm/amdkfd: uninitialized variable in dbgdev_wave_control_set_registers()
drm/i915: skl_update_scaler() wants a rotation bitmask instead of bit number
drm/i915: Cleanup phys status page too
pwm: brcmstb: Fix check of devm_ioremap_resource() return code
drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()
drm/dp/mst: Restore primary hub guid on resume
drm/dp/mst: Validate port in drm_dp_payload_send_msg()
drm/nouveau/gr/gf100: select a stream master to fixup tfb offset queries
drm: Loongson-3 doesn't fully support wc memory
drm/radeon: fix vertical bars appear on monitor (v2)
drm/radeon: forbid mapping of userptr bo through radeon device file
drm/radeon: fix initial connector audio value
drm/radeon: add a quirk for a XFX R9 270X
drm/amdgpu: fix regression on CIK (v2)
amdgpu/uvd: add uvd fw version for amdgpu
drm/amdgpu: bump the afmt limit for CZ, ST, Polaris
drm/amdgpu: use defines for CRTCs and AMFT blocks
drm/amdgpu: when suspending, if uvd/vce was running. need to cancel delay work.
iommu/dma: Restore scatterlist offsets correctly
iommu/amd: Fix checking of pci dma aliases
pinctrl: single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffs
pinctrl: mediatek: correct debounce time unit in mtk_gpio_set_debounce
xen kconfig: don't "select INPUT_XEN_KBDDEV_FRONTEND"
Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay
Input: gtco - fix crash on detecting device without endpoints
netlink: don't send NETLINK_URELEASE for unbound sockets
nl80211: check netlink protocol in socket release notification
powerpc: Update TM user feature bits in scan_features()
powerpc: Update cpu_user_features2 in scan_features()
powerpc: scan_features() updates incorrect bits for REAL_LE
crypto: talitos - fix AEAD tcrypt tests
crypto: talitos - fix crash in talitos_cra_init()
crypto: sha1-mb - use corrcet pointer while completing jobs
crypto: ccp - Prevent information leakage on export
iwlwifi: mvm: fix memory leak in paging
iwlwifi: pcie: lower the debug level for RSA semaphore access
s390/pci: add extra padding to function measurement block
cpufreq: intel_pstate: Fix processing for turbo activation ratio
Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control"
Revert "drm/radeon: disable runtime pm on PX laptops without dGPU power control"
drm/i915: Fix race condition in intel_dp_destroy_mst_connector()
drm/qxl: fix cursor position with non-zero hotspot
drm/nouveau/core: use vzalloc for allocating ramht
futex: Acknowledge a new waiter in counter before plist
futex: Handle unlock_pi race gracefully
asm-generic/futex: Re-enable preemption in futex_atomic_cmpxchg_inatomic()
ALSA: hda - Add dock support for ThinkPad X260
ALSA: pcxhr: Fix missing mutex unlock
ALSA: hda - add PCI ID for Intel Broxton-T
ALSA: hda - Keep powering up ADCs on Cirrus codecs
ALSA: hda/realtek - Add ALC3234 headset mode for Optiplex 9020m
ALSA: hda - Don't trust the reported actual power state
x86 EDAC, sb_edac.c: Repair damage introduced when "fixing" channel address
x86/mm/xen: Suppress hugetlbfs in PV guests
arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission
arm64: Honour !PTE_WRITE in set_pte_at() for kernel mappings
sched/cgroup: Fix/cleanup cgroup teardown/init
dmaengine: pxa_dma: fix the maximum requestor line
dmaengine: hsu: correct use of channel status register
dmaengine: dw: fix master selection
debugfs: Make automount point inodes permanently empty
lib: lz4: fixed zram with lz4 on big endian machines
dm cache metadata: fix cmd_read_lock() acquiring write lock
dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros
usb: gadget: f_fs: Fix use-after-free
usb: hcd: out of bounds access in for_each_companion
xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers
usb: xhci: fix wild pointers in xhci_mem_cleanup
xhci: resume USB 3 roothub first
usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host
assoc_array: don't call compare_object() on a node
ARM: OMAP2+: hwmod: Fix updating of sysconfig register
ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
ARM: mvebu: Correct unit address for linksys
ARM: dts: AM43x-epos: Fix clk parent for synctimer
KVM: arm/arm64: Handle forward time correction gracefully
kvm: x86: do not leak guest xcr0 into host interrupt handlers
x86/mce: Avoid using object after free in genpool
block: loop: fix filesystem corruption in case of aio/dio
block: partition: initialize percpuref before sending out KOBJ_ADD
Conflicts:
arch/arm64/Kconfig
arch/arm64/include/asm/cputype.h
arch/arm64/include/asm/hardirq.h
arch/arm64/include/asm/irq.h
arch/arm64/kernel/cpu_errata.c
arch/arm64/kernel/cpuinfo.c
arch/arm64/kernel/setup.c
arch/arm64/kernel/smp.c
arch/arm64/kernel/stacktrace.c
arch/arm64/mm/init.c
arch/arm64/mm/mmu.c
arch/arm64/mm/pageattr.c
mm/memcontrol.c
CRs-Fixed: 1054234
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
Change-Id: I2a7a34631ffee36ce18b9171f16d023be777392f
Currently, glitch removal is enabled by default when the PWM
channel is configured. However, that adds delay to the PWM
output which is undesirable for longer PWM period. Disable the
glitch removal when PWM is configured and enable it after the
PWM is enabled.
CRs-Fixed: 1009283
Change-Id: Ibf4abb99e5e3e7aa9a9212b57094876f6ec6e9f0
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Currently, PWM period is configured only when the client request
to configure period explicitly. However, there are requirements
to get it configured during bootup based upon the device tree
configuration. Add support for it.
While at it, add some pr_debug statements to the driver so that
it can provide some useful log of PWM specific calculations
runtime.
CRs-Fixed: 984628
Change-Id: I50de4488c32ef78efec1587305c56ab06fb32fed
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Currently, DTEST configuration is supported only based on the
DTEST line and output values for LPG subtype. Though this will
help configuring DTEST mode for PWM subtype, input validation
has to be fixed for supporting the latter properly. Add support
for that.
Also, rename the "lpg-dtest-line" device tree property to
"dtest-line" as this will apply for both LPG and PWM subtypes.
CRs-Fixed: 949595
Change-Id: I96bf477a14bb135cf9196532cf4bf39a45c9ff77
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
commit c5857e3f94ab2719dfac649a146cb5dd6f21fcf3 upstream.
The change fixes potential oops while accessing iomem on invalid address
if devm_ioremap_resource() fails due to some reason.
The devm_ioremap_resource() function returns ERR_PTR() and never returns
NULL, which makes useless a following check for NULL.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Fixes: 3a9f595702 ("pwm: Add Broadcom BCM7038 PWM controller support")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change to using upstream spmi bus architecture. All the spmi devices,
marked by spmi-dev-container, become platform devices.
spmi-slave-container devices become spmi_devices each representing
a slave. The read/write functions use regmap api's instead of calls to
spmi_ext_register_read/write() implemented by the spmi bus. This
regmap is instantiated per slave.
The spmi bus helper functions like spmi_get_irq get changed to their
platform bus equivalents.
Change Kconfig files include
* Remove dependence on OF_SPMI, MSM_QPNP_INT
* There were few places where an earlier commit
dcc2aedc80746acee589e4b47d3e6adf5d3ec253
missed adding dependence on SPMI along with MSM_SPMI.
Fix them.
* Add depends on ARCH_MSM. ARCH_MSM is used for internal builds.
Change the nodes in DTSI files to confirm to the modified drivers.
Update their binding docs to drop spmi-dev-container and
spmi-slave-container;
Finally update defconfig to use upstream SPMI.
Change-Id: Ic85bff27c09c84b152cb38acbc3cadd05c0ec57a
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
This snapshot is taken as of msm-3.18 commit
9da4ddc (Merge "clk: msm: clock-gcc: Associate gfx rail
voting with gfx3d branch")
Change-Id: Idd2f467f1f1863a156d1757589dfe78158f0e43f
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
This round contains a couple of new drivers for the Marvell Berlin
family of SoCs, various SoCs from Renesas and Broadcom as well as the
backlight PWM present on MediaTek SoCs.
Further existing drivers are extended to support a wider range of
hardware.
The remaining patches are minor fixes and cleanups across the board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=gwbt
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This round contains a couple of new drivers for the Marvell Berlin
family of SoCs, various SoCs from Renesas and Broadcom as well as the
backlight PWM present on MediaTek SoCs.
Further existing drivers are extended to support a wider range of
hardware.
The remaining patches are minor fixes and cleanups across the board.
Note that one of the patches included in this pull request is against
arch/unicore32. I've included it here because I couldn't get a
response from Guan Xuetao and I consider the change low-risk.
Equivalent patches have been merged and tested in Samsung and PXA
trees. The goal is to finally get rid of legacy code paths that have
repeatedly been causing headaches"
* tag 'pwm/for-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits)
pwm: sunxi: Fix whitespace issue
pwm: sysfs: Make use of the DEVICE_ATTR_[RW][WO] macro's
pwm: sysfs: Remove unnecessary temporary variable
unicore32: nb0916: Use PWM lookup table
pwm: pwm-rcar: Revise the device tree binding document about compatible
pwm: Return -ENODEV if no PWM lookup match is found
pwm: sun4i: Add support for PWM controller on sun5i SoCs
pwm: Set enable state properly on failed call to enable
pwm: lpss: Add support for runtime PM
pwm: lpss: Add more Intel Broxton IDs
pwm: lpss: Support all four PWMs on Intel Broxton
pwm: lpss: Add support for multiple PWMs
pwm-pca9685: enable ACPI device found on Galileo Gen2
pwm: Add MediaTek display PWM driver support
dt-bindings: pwm: Add MediaTek display PWM bindings
pwm: tipwmss: Enable on TI DRA7x and AM437x
pwm: atmel-hlcdc: add sama5d2 SoC support.
pwm: Add Broadcom BCM7038 PWM controller support
Documentation: dt: add Broadcom BCM7038 PWM controller binding
pwm: Add support for R-Car PWM Timer
...
This patch changes no code, it just fixes the whitespacing. Operators
should be separated from operands by a single space.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
For the npwm property the PWM sysfs interface already made use of the
DEVICE_ATTR_RO macro. This patch expands this to the other sysfs
properties so that the code base is concise and makes use of this
helpful macro.
This has the advantage of slightly reducing the code size, improving
readability and no longer using magic values for permissions.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Use the result of pwm_is_enabled() directly instead of storing it in a
temporary variable.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
When looking up a PWM using the lookup table, assume that all entries
will have been added already, so failure to find a match means that no
corresponding entry has been registered.
This fixes an issue where -EPROBE_DEFER would be returned if the PWM
lookup table is empty. After this fix, -EPROBE_DEFER is reserved for
situations where no provider has yet registered for a matching entry.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The PWM controller on sun5i SoCs is identical to the one found on sun7i
SoCs. On the A13 package only one of the 2 pins is routed to the outside,
so only advertise one PWM channel there.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The pwm_enable() function didn't clear the enabled bit if a call to the
driver's ->enable() callback returned an error. The result was that the
state of the PWM core was wrong. Clearing the bit when enable returns
an error ensures the state is properly set.
Tested-by: Jonathan Richardson <jonathar@broadcom.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
[thierry.reding@gmail.com: add missing kerneldoc for the lock]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To be able to save some power when PWM is not in use, add support for
runtime PM for this driver. This also allows the platform to transition to
low power S0ix states when the system is idle.
Signed-off-by: Huiquan Zhong <huiquan.zhong@intel.com>
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add more Intel Broxton ACPI and PCI IDs to the driver supported devices
list.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Intel Broxton has similar PWM than Intel Braswell but instead of one it has
four PWMs included in one PCI/ACPI device. This patch adds support for all
the four PWMs and changes the PCI part of the driver to use
'pwm_lpss_bxt_info' instead.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
New Intel SoCs such as Broxton will have four PWMs per PCI (or ACPI)
device. Each PWM has 1k of register space allocated from the parent device.
Add support for this.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
There is a chip connected to i2c bus on Intel Galileo Gen2 board. Enable it via
ACPI ID INT3492.
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add display PWM driver support to modify backlight for MT8173 and
MT6595. The PWM has one channel to control the brightness of the
display. When the (high_width / period) is closer to 1, the screen
is brighter; otherwise, it is darker.
Signed-off-by: YH Huang <yh.huang@mediatek.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
TIPWMSS is present on TI's DRA7x and AM437x SoCs. Enable its usage.
Instead of adding each SoC individually, use the more generic symbol
ARCH_OMAP2PLUS instead.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add sama5d2 hlcdc backlight PWM support. This chip doesn't have to deal with an
errata, so it's a simple addition of the mfd compatible string.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add support for the BCM7038-style PWM controller found in all BCM7xxx STB SoCs.
This controller has a hardcoded 2 channels per controller, and cascades a
variable frequency generator on top of a fixed frequency generator which offers
a range of a 148ns period all the way to ~622ms periods.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Commit dca1a4b5ff ("clk: at91: keep slow clk enabled to prevent system
hang") added a workaround for the slow clock as it is not properly handled
by its users.
Get and use the slow clock as it is necessary for the timer counters.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
This patch adds support for R-Car SoCs PWM Timer. The PWM timer of
R-Car H2 has 7 channels. So, we can use the channels if we describe
device tree nodes.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add a PWM controller driver for the Marvell Berlin SoCs. This PWM
controller has 4 channels.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This platform driver has a OF device ID table but the OF module alias
information is not created so module autoloading won't work.
This patch adds the missing MODULE_DEVICE_TABLE() for OF to export that
information so modules have the correct aliases built-in and autoloading
works correctly.
A longer explanation by Javier Canillas can be found here:
https://lkml.org/lkml/2015/7/30/519
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This set of changes introduces the beginnings of a new API that's based
around the concept of states that can be atomically applied. Drivers go
to various lengths to implement something similar, which indicates that
the core should really be providing the necessary framework.
On top of that, there is a bit of cleanup as well as improved kerneldoc
and integration into the device-drivers DocBook.
Regarding drivers there is a new one for the NXP LPC18xx family of SoCs
and a couple of fixes for existing drivers (pca9685, Broadcom Kona and
Atmel HLCDC).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ymH8
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set of changes introduces the beginnings of a new API that's
based around the concept of states that can be atomically applied.
Drivers go to various lengths to implement something similar, which
indicates that the core should really be providing the necessary
framework.
On top of that, there is a bit of cleanup as well as improved
kerneldoc and integration into the device-drivers DocBook.
Regarding drivers there is a new one for the NXP LPC18xx family of
SoCs and a couple of fixes for existing drivers (pca9685, Broadcom
Kona and Atmel HLCDC)"
* tag 'pwm/for-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
ARM: at91: pwm: atmel-hlcdc: Add at91sam9n12 errata
pwm: Add NXP LPC18xx PWM/SCT DT binding documentation
pwm: NXP LPC18xx PWM/SCT driver
pwm-pca9685: Support changing the output frequency
pwm-pca9685: Fix several driver bugs
pwm: kona: Modify settings application sequence
pwm: pca9685: Drop owner assignment
pwm: Add to device-drivers documentation
pwm: Clean up kerneldoc
pwm: Remove useless whitespace
pwm: sysfs: Remove unnecessary padding
pwm: sysfs: Properly convert from enum to string
pwm: Make use of pwm_get_xxx() helpers where appropriate
pwm: Add pwm_get_polarity() helper function
pwm: Constify PWM device where possible
pwm: Add the pwm_is_enabled() helper
The errata for HLCDC PWM of at91sam9n12 are the same as for at91sam9x5.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This commit adds support for NXP LPC18xx PWM/SCT.
NXP LPC SoCs family, which includes LPC18xx/LPC43xx, provides a State
Configurable Timer (SCT) which can be configured as a Pulse Width
Modulator. Other SoCs in that family may share the same hardware.
The PWM supports a total of 16 channels, but only 15 can be simultaneously
requested. There's only one period, global to all the channels, thus PWM
driver will refuse setting different values to it, unless there's only one
channel requested.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
[thierry.reding@gmail.com: remove excessive padding of fields]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Previously, period_ns and duty_ns were only used to determine the
ratio of ON and OFF time, the default frequency of 200 Hz was never
changed.
The PCA9685 however is capable of changing the PWM output frequency,
which is expected when changing the period.
This patch configures the prescaler accordingly, using the formula
and notes provided in the PCA9685 datasheet.
Bounds checking for the minimum and maximum frequencies, last updated
in revision v.4 of said datasheet, is also added.
The prescaler is only touched if the period changed, because we have to
put the chip into sleep mode to unlock the prescale register.
If it is changed, the PWM output frequency changes for all outputs,
because there is one prescaler per chip. This is documented in the
PCA9685 datasheet and in the comments.
If the duty cycle is not changed at the same time as the period, then
we restart the PWM output using the duty cycle to period ratio from
before the period change.
When using LEDs for example, previously set brightness levels stay the
same when the frequency changes.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Problems:
- When duty_ns == period_ns, the full OFF bit was not cleared and the
PWM output of the PCA9685 stayed off.
- When duty_ns == period_ns and the catch-all channel was used, the
ALL_LED_OFF_L register was not cleared.
- The full ON bit was not cleared when setting the OFF time, therefore
the exact OFF time was ignored when setting a duty_ns < period_ns
Solution: Clear both OFF registers when setting full ON and clear the
full ON bit when changing the OFF registers.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Update the driver so that settings are applied in accordance with the
most recent version of the hardware spec. The revised sequence clears
the trigger bit, waits 400ns, writes settings, sets the trigger bit,
and waits another 400ns. This corrects an issue where occasionally a
requested change was not properly reflected in the PWM output.
Reviewed-by: Arun Ramamurthy <arunrama@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Scott Branden <sbranden@broadcom.com>
Reviewed-by: Tim Kryger <tim.kryger@gmail.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Padding initializers so that assignment operators align is bound to lead
to inconsistencies or churn. Single spaces around the assignment is just
fine.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The current code will check for polarity in a boolean way. While it is
correct that polarity is either normal or inversed, make it more obvious
that it's an enumeration by using a switch statement and explicit
matches on the enumeration values.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The Crystalcove PMIC provides three PWM signals and this driver exports
one of them on the BYT platform which is used to control backlight for
DSI panel. This is platform device implementation of the drivers/mfd
cell device for CRC PMIC.
CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Varka Bhadram <varkabhadram@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use the pwm_get_xxx() helpers instead of directly accessing the fields
in struct pwm_device. This will allow us to smoothly move to the atomic
update approach.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Some PWM drivers are testing the PWMF_ENABLED flag. Create a helper
function to hide the logic behind enabled test. This will allow us to
smoothly move from the current approach to an atomic PWM update
approach.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This has a couple of fixes for Atmel, Samsung and Broadcom drivers. Some
preparatory patches for more upcoming Intel work is included as well.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=VmI2
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This has a couple of fixes for Atmel, Samsung and Broadcom drivers.
Some preparatory patches for more upcoming Intel work is included as
well"
* tag 'pwm/for-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: lpss: pci: Add support for Broxton platform
pwm: bcm-kona: Don't set polarity in probe
pwm: Add pwmchip_add_with_polarity() API
pwm: atmel: Fix incorrect CDTY value after disabling
pwm: atmel: Fix incorrect CDTY value after enabling
pwm: samsung: Use MODULE_DEVICE_TABLE() to include OF modalias
pwm: Add support to remove registered consumer lookup tables
Omit setting the polarity to normal during probe and instead use the new
pwmchip_add_with_polarity() function to register a PWM chip with inverse
polarity by default for all channels to reflect the hardware default.
Signed-off-by: Arun Ramamurthy <arunrama@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Tim Kryger <tim.kryger@gmail.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
[thierry.reding@gmail.com: use pwmchip_add_with_polarity()]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add a new function to register a PWM chip with channels that have their
initial polarity as specified by an additional parameter. This benefits
drivers of controllers that by default operate with inversed polarity
by removing the need to modify the polarity during initialization.
Signed-off-by: Tim Kryger <tim.kryger@gmail.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
[thierry.reding@gmail.com: export pwmchip_add_with_polarity()]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
pwm-leds calls .config() and .disable() in a row. This exhibits that it
may happen that the channel gets disabled before CDTY has been updated
with CUPD. The issue gets quite worse with long periods. So, ensure that
at least one period has past before disabling the channel by polling
ISR.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Gaël PORTAY <gael.portay@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
CUPD is not flushed before enabling the channel so it will update
CDTY/CPRD just after one period. So we always set CUPD, even when the
channel is not enabled.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
If the pwm-samsung driver is built as a module, modalias information is
not filled so the module is not autoloaded. Use the MODULE_DEVICE_TABLE()
macro to export the OF device ID so the module contains that information.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The PWM hardware on Pistachio platform has a maximum timebase steps
value to 255. To fix it, let's introduce a compatible-specific
data structure to contain the SoC-specific details and use it to
specify a maximum timebase.
Also, let's limit the minimum timebase to 16 steps, to allow a sane
range of duty cycle steps.
Fixes: 277bb6a29e ("pwm: Imagination Technologies PWM DAC driver")
Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
In case some drivers are unloading, they can remove lookup tables which
they had registered during their load time to avoid redundant entries if
loaded again.
CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
