commit f980ebc058c2fa2a552e495db1de0b330082ab70 upstream.
When HW crypto is used, there's no need for the CCMP/GCMP MIC to
be available to mac80211, and the hardware might have removed it
already after checking. The MIC is also useless to have when the
frame is already decrypted, so allow indicating that it's not
present.
Since we are running out of bits in mac80211_rx_flags, make
the flags field a u64.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=IA5i
-----END PGP SIGNATURE-----
Merge 4.4.130 into android-4.4
Changes in 4.4.130
cifs: do not allow creating sockets except with SMB1 posix exensions
x86/tsc: Prevent 32bit truncation in calc_hpet_ref()
perf: Return proper values for user stack errors
staging: ion : Donnot wakeup kswapd in ion system alloc
r8152: add Linksys USB3GIGV1 id
Input: drv260x - fix initializing overdrive voltage
ath9k_hw: check if the chip failed to wake up
jbd2: fix use after free in kjournald2()
Revert "ath10k: send (re)assoc peer command when NSS changed"
s390: introduce CPU alternatives
s390: enable CPU alternatives unconditionally
KVM: s390: wire up bpb feature
s390: scrub registers on kernel entry and KVM exit
s390: add optimized array_index_mask_nospec
s390/alternative: use a copy of the facility bit mask
s390: add options to change branch prediction behaviour for the kernel
s390: run user space and KVM guests with modified branch prediction
s390: introduce execute-trampolines for branches
s390: Replace IS_ENABLED(EXPOLINE_*) with IS_ENABLED(CONFIG_EXPOLINE_*)
s390: do not bypass BPENTER for interrupt system calls
s390/entry.S: fix spurious zeroing of r0
s390: move nobp parameter functions to nospec-branch.c
s390: add automatic detection of the spectre defense
s390: report spectre mitigation via syslog
s390: add sysfs attributes for spectre
s390: correct nospec auto detection init order
s390: correct module section names for expoline code revert
bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslave
KEYS: DNS: limit the length of option strings
l2tp: check sockaddr length in pppol2tp_connect()
net: validate attribute sizes in neigh_dump_table()
llc: delete timers synchronously in llc_sk_free()
tcp: don't read out-of-bounds opsize
team: avoid adding twice the same option to the event list
team: fix netconsole setup over team
packet: fix bitfield update race
pppoe: check sockaddr length in pppoe_connect()
vlan: Fix reading memory beyond skb->tail in skb_vlan_tagged_multi
sctp: do not check port in sctp_inet6_cmp_addr
llc: hold llc_sap before release_sock()
llc: fix NULL pointer deref for SOCK_ZAPPED
tipc: add policy for TIPC_NLA_NET_ADDR
net: fix deadlock while clearing neighbor proxy table
tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets
net: af_packet: fix race in PACKET_{R|T}X_RING
ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy
scsi: mptsas: Disable WRITE SAME
cdrom: information leak in cdrom_ioctl_media_changed()
s390/cio: update chpid descriptor after resource accessibility event
s390/uprobes: implement arch_uretprobe_is_alive()
Linux 4.4.130
Change-Id: I58646180c70ac61da3e2a602085760881d914eb5
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit a49e2f5d5fb141884452ddb428f551b123d436b5 ]
We must validate sockaddr_len, otherwise userspace can pass fewer data
than we expect and we end up accessing invalid data.
Fixes: 224cf5ad14 ("ppp: Move the PPP drivers")
Reported-by: syzbot+4f03bdf92fdf9ef5ddab@syzkaller.appspotmail.com
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9cf2f437ca5b39828984064fad213e68fc17ef11 ]
The same fix in Commit dbe173079a ("bridge: fix netconsole
setup over bridge") is also needed for team driver.
While at it, remove the unnecessary parameter *team from
team_port_enable_netpoll().
v1->v2:
- fix it in a better way, as does bridge.
Fixes: 0fb52a27a0 ("team: cleanup netpoll clode")
Reported-by: João Avelino Bellomo Filho <jbellomo@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ddea788c63094f7c483783265563dd5b50052e28 ]
After Commit 8a8efa22f5 ("bonding: sync netpoll code with bridge"), it
would set slave_dev npinfo in slave_enable_netpoll when enslaving a dev
if bond->dev->npinfo was set.
However now slave_dev npinfo is set with bond->dev->npinfo before calling
slave_enable_netpoll. With slave_dev npinfo set, __netpoll_setup called
in slave_enable_netpoll will not call slave dev's .ndo_netpoll_setup().
It causes that the lower dev of this slave dev can't set its npinfo.
One way to reproduce it:
# modprobe bonding
# brctl addbr br0
# brctl addif br0 eth1
# ifconfig bond0 192.168.122.1/24 up
# ifenslave bond0 eth2
# systemctl restart netconsole
# ifenslave bond0 br0
# ifconfig eth2 down
# systemctl restart netconsole
The netpoll won't really work.
This patch is to remove that slave_dev npinfo setting in bond_enslave().
Fixes: 8a8efa22f5 ("bonding: sync netpoll code with bridge")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a34d0a0da1abae46a5f6ebd06fb0ec484ca099d9 upstream.
In an RFC patch, Sven Eckelmann and Simon Wunderlich reported:
"QCA 802.11n chips (especially AR9330/AR9340) sometimes end up in a
state in which a read of AR_CFG always returns 0xdeadbeef.
This should not happen when when the power_mode of the device is
ATH9K_PM_AWAKE."
Include the check for the default register state in the existing MAC
hang check.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90841047a01b452cc8c3f9b990698b264143334a upstream.
This linksys dongle by default comes up in cdc_ether mode.
This patch allows r8152 to claim the device:
Bus 002 Device 002: ID 13b1:0041 Linksys
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
[krzk: Rebase on v4.4]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=K6Qy
-----END PGP SIGNATURE-----
Merge 4.4.129 into android-4.4
Changes in 4.4.129
media: v4l2-compat-ioctl32: don't oops on overlay
parisc: Fix out of array access in match_pci_device()
perf intel-pt: Fix overlap detection to identify consecutive buffers correctly
perf intel-pt: Fix sync_switch
perf intel-pt: Fix error recovery from missing TIP packet
perf intel-pt: Fix timestamp following overflow
radeon: hide pointless #warning when compile testing
Revert "perf tests: Decompress kernel module before objdump"
block/loop: fix deadlock after loop_set_status
s390/qdio: don't retry EQBS after CCQ 96
s390/qdio: don't merge ERROR output buffers
s390/ipl: ensure loadparm valid flag is set
getname_kernel() needs to make sure that ->name != ->iname in long case
rtl8187: Fix NULL pointer dereference in priv->conf_mutex
hwmon: (ina2xx) Fix access to uninitialized mutex
cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN
slip: Check if rstate is initialized before uncompressing
lan78xx: Correctly indicate invalid OTP
x86/hweight: Get rid of the special calling convention
x86/hweight: Don't clobber %rdi
tty: make n_tty_read() always abort if hangup is in progress
ubifs: Check ubifs_wbuf_sync() return code
ubi: fastmap: Don't flush fastmap work on detach
ubi: Fix error for write access
ubi: Reject MLC NAND
fs/reiserfs/journal.c: add missing resierfs_warning() arg
resource: fix integer overflow at reallocation
ipc/shm: fix use-after-free of shm file via remap_file_pages()
mm, slab: reschedule cache_reap() on the same CPU
usb: musb: gadget: misplaced out of bounds check
ARM: dts: at91: at91sam9g25: fix mux-mask pinctrl property
ARM: dts: at91: sama5d4: fix pinctrl compatible string
xen-netfront: Fix hang on device removal
regmap: Fix reversed bounds check in regmap_raw_write()
ACPI / video: Add quirk to force acpi-video backlight on Samsung 670Z5E
ACPI / hotplug / PCI: Check presence of slot itself in get_slot_status()
USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
usb: dwc3: pci: Properly cleanup resource
HID: i2c-hid: fix size check and type usage
powerpc/powernv: Handle unknown OPAL errors in opal_nvram_write()
powerpc/64: Fix smp_wmb barrier definition use use lwsync consistently
powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops
powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops
HID: Fix hid_report_len usage
HID: core: Fix size as type u32
ASoC: ssm2602: Replace reg_default_raw with reg_default
thunderbolt: Resume control channel after hibernation image is created
random: use a tighter cap in credit_entropy_bits_safe()
jbd2: if the journal is aborted then don't allow update of the log tail
ext4: don't update checksum of new initialized bitmaps
ext4: fail ext4_iget for root directory if unallocated
RDMA/ucma: Don't allow setting RDMA_OPTION_IB_PATH without an RDMA device
ALSA: pcm: Fix UAF at PCM release via PCM timer access
IB/srp: Fix srp_abort()
IB/srp: Fix completion vector assignment algorithm
dmaengine: at_xdmac: fix rare residue corruption
um: Use POSIX ucontext_t instead of struct ucontext
iommu/vt-d: Fix a potential memory leak
mmc: jz4740: Fix race condition in IRQ mask update
clk: mvebu: armada-38x: add support for 1866MHz variants
clk: mvebu: armada-38x: add support for missing clocks
clk: bcm2835: De-assert/assert PLL reset signal when appropriate
thermal: imx: Fix race condition in imx_thermal_probe()
watchdog: f71808e_wdt: Fix WD_EN register read
ALSA: oss: consolidate kmalloc/memset 0 call to kzalloc
ALSA: pcm: Use ERESTARTSYS instead of EINTR in OSS emulation
ALSA: pcm: Avoid potential races between OSS ioctls and read/write
ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams
ALSA: pcm: Fix mutex unbalance in OSS emulation ioctls
ALSA: pcm: Fix endless loop for XRUN recovery in OSS emulation
vfio-pci: Virtualize PCIe & AF FLR
vfio/pci: Virtualize Maximum Payload Size
vfio/pci: Virtualize Maximum Read Request Size
ext4: don't allow r/w mounts if metadata blocks overlap the superblock
drm/radeon: Fix PCIe lane width calculation
ext4: fix crashes in dioread_nolock mode
ext4: fix deadlock between inline_data and ext4_expand_extra_isize_ea()
ALSA: line6: Use correct endpoint type for midi output
ALSA: rawmidi: Fix missing input substream checks in compat ioctls
ALSA: hda - New VIA controller suppor no-snoop path
HID: hidraw: Fix crash on HIDIOCGFEATURE with a destroyed device
MIPS: uaccess: Add micromips clobbers to bzero invocation
MIPS: memset.S: EVA & fault support for small_memset
MIPS: memset.S: Fix return of __clear_user from Lpartial_fixup
MIPS: memset.S: Fix clobber of v1 in last_fixup
powerpc/eeh: Fix enabling bridge MMIO windows
powerpc/lib: Fix off-by-one in alternate feature patching
jffs2_kill_sb(): deal with failed allocations
hypfs_kill_super(): deal with failed allocations
rpc_pipefs: fix double-dput()
Don't leak MNT_INTERNAL away from internal mounts
autofs: mount point create should honour passed in mode
mm: allow GFP_{FS,IO} for page_cache_read page cache allocation
mm/filemap.c: fix NULL pointer in page_cache_tree_insert()
ext4: bugfix for mmaped pages in mpage_release_unused_pages()
fanotify: fix logic of events on child
writeback: safer lock nesting
Linux 4.4.129
Change-Id: I8806d2cc92fe512f27a349e8f630ced0cac9a8d7
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit c2d2e6738a209f0f9dffa2dc8e7292fc45360d61 upstream.
A toolstack may delete the vif frontend and backend xenstore entries
while xen-netfront is in the removal code path. In that case, the
checks for xenbus_read_driver_state would return XenbusStateUnknown, and
xennet_remove would hang indefinitely. This hang prevents system
shutdown.
xennet_remove must be able to handle XenbusStateUnknown, and
netback_changed must also wake up the wake_queue for that state as well.
Fixes: 5b5971df3bc2 ("xen-netfront: remove warning when unloading module")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Cc: Eduardo Otubo <otubo@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4bfc33807a9a02764bdd1e42e794b3b401240f27 ]
lan78xx_read_otp tries to return -EINVAL in the event of invalid OTP
content, but the value gets overwritten before it is returned and the
read goes ahead anyway. Make the read conditional as it should be
and preserve the error code.
Fixes: 55d7de9de6 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3f01ddb962dc506916c243f9524e8bef97119b77 ]
On receiving a packet the state index points to the rstate which must be
used to fill up IP and TCP headers. But if the state index points to a
rstate which is unitialized, i.e. filled with zeros, it gets stuck in an
infinite loop inside ip_fast_csum trying to compute the ip checsum of a
header with zero length.
89.666953: <2> [<ffffff9dd3e94d38>] slhc_uncompress+0x464/0x468
89.666965: <2> [<ffffff9dd3e87d88>] ppp_receive_nonmp_frame+0x3b4/0x65c
89.666978: <2> [<ffffff9dd3e89dd4>] ppp_receive_frame+0x64/0x7e0
89.666991: <2> [<ffffff9dd3e8a708>] ppp_input+0x104/0x198
89.667005: <2> [<ffffff9dd3e93868>] pppopns_recv_core+0x238/0x370
89.667027: <2> [<ffffff9dd4428fc8>] __sk_receive_skb+0xdc/0x250
89.667040: <2> [<ffffff9dd3e939e4>] pppopns_recv+0x44/0x60
89.667053: <2> [<ffffff9dd4426848>] __sock_queue_rcv_skb+0x16c/0x24c
89.667065: <2> [<ffffff9dd4426954>] sock_queue_rcv_skb+0x2c/0x38
89.667085: <2> [<ffffff9dd44f7358>] raw_rcv+0x124/0x154
89.667098: <2> [<ffffff9dd44f7568>] raw_local_deliver+0x1e0/0x22c
89.667117: <2> [<ffffff9dd44c8ba0>] ip_local_deliver_finish+0x70/0x24c
89.667131: <2> [<ffffff9dd44c92f4>] ip_local_deliver+0x100/0x10c
./scripts/faddr2line vmlinux slhc_uncompress+0x464/0x468 output:
ip_fast_csum at arch/arm64/include/asm/checksum.h:40
(inlined by) slhc_uncompress at drivers/net/slip/slhc.c:615
Adding a variable to indicate if the current rstate is initialized. If
such a packet arrives, move to toss state.
Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 53765341ee821c0a0f1dec41adc89c9096ad694c ]
The Cinterion AHS8 is a 3G device with one embedded WWAN interface
using cdc_ether as a driver.
The modem is controlled via AT commands through the exposed TTYs.
AT+CGDCONT write command can be used to activate or deactivate a WWAN
connection for a PDP context defined with the same command. UE
supports one WWAN adapter.
Signed-off-by: Bassem Boubaker <bassem.boubaker@actia.fr>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7972326a26b5bf8dc2adac575c4e03ee7e9d193a upstream.
This can be reproduced by bind/unbind the driver multiple times
in AM3517 board.
Analysis revealed that rtl8187_start() was invoked before probe
finishes(ie. before the mutex is initialized).
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
Hardware name: Generic AM3517 (Flattened Device Tree)
[<c010e0d8>] (unwind_backtrace) from [<c010beac>] (show_stack+0x10/0x14)
[<c010beac>] (show_stack) from [<c017401c>] (register_lock_class+0x4f4/0x55c)
[<c017401c>] (register_lock_class) from [<c0176fe0>] (__lock_acquire+0x74/0x1938)
[<c0176fe0>] (__lock_acquire) from [<c0178cfc>] (lock_acquire+0xfc/0x23c)
[<c0178cfc>] (lock_acquire) from [<c08aa2f8>] (mutex_lock_nested+0x50/0x3b0)
[<c08aa2f8>] (mutex_lock_nested) from [<c05f5bf8>] (rtl8187_start+0x2c/0xd54)
[<c05f5bf8>] (rtl8187_start) from [<c082dea0>] (drv_start+0xa8/0x320)
[<c082dea0>] (drv_start) from [<c084d1d4>] (ieee80211_do_open+0x2bc/0x8e4)
[<c084d1d4>] (ieee80211_do_open) from [<c069be94>] (__dev_open+0xb8/0x120)
[<c069be94>] (__dev_open) from [<c069c11c>] (__dev_change_flags+0x88/0x14c)
[<c069c11c>] (__dev_change_flags) from [<c069c1f8>] (dev_change_flags+0x18/0x48)
[<c069c1f8>] (dev_change_flags) from [<c0710b08>] (devinet_ioctl+0x738/0x840)
[<c0710b08>] (devinet_ioctl) from [<c067925c>] (sock_ioctl+0x164/0x2f4)
[<c067925c>] (sock_ioctl) from [<c02883f8>] (do_vfs_ioctl+0x8c/0x9d0)
[<c02883f8>] (do_vfs_ioctl) from [<c0288da8>] (SyS_ioctl+0x6c/0x7c)
[<c0288da8>] (SyS_ioctl) from [<c0107760>] (ret_fast_syscall+0x0/0x1c)
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = cd1ec000
[00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
Hardware name: Generic AM3517 (Flattened Device Tree)
task: ce73eec0 task.stack: cd1ea000
PC is at mutex_lock_nested+0xe8/0x3b0
LR is at mutex_lock_nested+0xd0/0x3b0
Cc: stable@vger.kernel.org
Signed-off-by: Sudhir Sreedharan <ssreedharan@mvista.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=LiZa
-----END PGP SIGNATURE-----
Merge 4.4.128 into android-4.4
Changes in 4.4.128
cfg80211: make RATE_INFO_BW_20 the default
md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock
rtc: snvs: fix an incorrect check of return value
x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic()
NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION
IB/srpt: Fix abort handling
af_key: Fix slab-out-of-bounds in pfkey_compile_policy.
mac80211: bail out from prep_connection() if a reconfig is ongoing
bna: Avoid reading past end of buffer
qlge: Avoid reading past end of buffer
ipmi_ssif: unlock on allocation failure
net: cdc_ncm: Fix TX zero padding
net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control
lockd: fix lockd shutdown race
drivers/misc/vmw_vmci/vmci_queue_pair.c: fix a couple integer overflow tests
pidns: disable pid allocation if pid_ns_prepare_proc() is failed in alloc_pid()
s390: move _text symbol to address higher than zero
net/mlx4_en: Avoid adding steering rules with invalid ring
NFSv4.1: Work around a Linux server bug...
CIFS: silence lockdep splat in cifs_relock_file()
blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op
net: qca_spi: Fix alignment issues in rx path
netxen_nic: set rcode to the return status from the call to netxen_issue_cmd
Input: elan_i2c - check if device is there before really probing
Input: elantech - force relative mode on a certain module
KVM: PPC: Book3S PR: Check copy_to/from_user return values
vmxnet3: ensure that adapter is in proper state during force_close
SMB2: Fix share type handling
bus: brcmstb_gisb: Use register offsets with writes too
bus: brcmstb_gisb: correct support for 64-bit address output
PowerCap: Fix an error code in powercap_register_zone()
ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin
staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning
x86/tsc: Provide 'tsc=unstable' boot parameter
ARM: dts: imx6qdl-wandboard: Fix audio channel swap
ipv6: avoid dad-failures for addresses with NODAD
async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
usb: dwc3: keystone: check return value
btrfs: fix incorrect error return ret being passed to mapping_set_error
ata: libahci: properly propagate return value of platform_get_irq()
neighbour: update neigh timestamps iff update is effective
arp: honour gratuitous ARP _replies_
usb: chipidea: properly handle host or gadget initialization failure
USB: ene_usb6250: fix first command execution
net: x25: fix one potential use-after-free issue
USB: ene_usb6250: fix SCSI residue overwriting
serial: 8250: omap: Disable DMA for console UART
serial: sh-sci: Fix race condition causing garbage during shutdown
sh_eth: Use platform device for printing before register_netdev()
scsi: csiostor: fix use after free in csio_hw_use_fwconfig()
powerpc/mm: Fix virt_addr_valid() etc. on 64-bit hash
ath5k: fix memory leak on buf on failed eeprom read
selftests/powerpc: Fix TM resched DSCR test with some compilers
xfrm: fix state migration copy replay sequence numbers
iio: hi8435: avoid garbage event at first enable
iio: hi8435: cleanup reset gpio
ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors
md-cluster: fix potential lock issue in add_new_disk
ARM: davinci: da8xx: Create DSP device only when assigned memory
ray_cs: Avoid reading past end of buffer
leds: pca955x: Correct I2C Functionality
sched/numa: Use down_read_trylock() for the mmap_sem
net/mlx5: Tolerate irq_set_affinity_hint() failures
selinux: do not check open permission on sockets
block: fix an error code in add_partition()
mlx5: fix bug reading rss_hash_type from CQE
net: ieee802154: fix net_device reference release too early
libceph: NULL deref on crush_decode() error path
netfilter: ctnetlink: fix incorrect nf_ct_put during hash resize
pNFS/flexfiles: missing error code in ff_layout_alloc_lseg()
ASoC: rsnd: SSI PIO adjust to 24bit mode
scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats()
fix race in drivers/char/random.c:get_reg()
ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff()
tcp: better validation of received ack sequences
net: move somaxconn init from sysctl code
Input: elan_i2c - clear INT before resetting controller
bonding: Don't update slave->link until ready to commit
KVM: nVMX: Fix handling of lmsw instruction
net: llc: add lock_sock in llc_ui_bind to avoid a race condition
ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc node
thermal: power_allocator: fix one race condition issue for thermal_instances list
perf probe: Add warning message if there is unexpected event name
l2tp: fix missing print session offset info
rds; Reset rs->rs_bound_addr in rds_add_bound() failure path
hwmon: (ina2xx) Make calibration register value fixed
media: videobuf2-core: don't go out of the buffer range
ASoC: Intel: cht_bsw_rt5645: Analog Mic support
scsi: libiscsi: Allow sd_shutdown on bad transport
scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag.
vfb: fix video mode and line_length being set when loaded
gpio: label descriptors using the device name
ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()'
wl1251: check return from call to wl1251_acx_arp_ip_filter
hdlcdrv: Fix divide by zero in hdlcdrv_ioctl
ovl: filter trusted xattr for non-admin
powerpc/[booke|4xx]: Don't clobber TCR[WP] when setting TCR[DIE]
dmaengine: imx-sdma: Handle return value of clk_prepare_enable
arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage
net/mlx5: avoid build warning for uniprocessor
cxgb4: FW upgrade fixes
rtc: opal: Handle disabled TPO in opal_get_tpo_time()
rtc: interface: Validate alarm-time before handling rollover
SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()
net: freescale: fix potential null pointer dereference
KVM: SVM: do not zero out segment attributes if segment is unusable or not present
clk: scpi: fix return type of __scpi_dvfs_round_rate
clk: Fix __set_clk_rates error print-string
powerpc/spufs: Fix coredump of SPU contexts
perf trace: Add mmap alias for s390
qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and qlcnic_82xx_hw_read_wx_2M
mISDN: Fix a sleep-in-atomic bug
drm/omap: fix tiled buffer stride calculations
cxgb4: fix incorrect cim_la output for T6
Fix serial console on SNI RM400 machines
bio-integrity: Do not allocate integrity context for bio w/o data
skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow
sit: reload iphdr in ipip6_rcv
net/mlx4: Fix the check in attaching steering rules
net/mlx4: Check if Granular QoS per VF has been enabled before updating QP qos_vport
perf header: Set proper module name when build-id event found
perf report: Ensure the perf DSO mapping matches what libdw sees
tags: honor COMPILED_SOURCE with apart output directory
e1000e: fix race condition around skb_tstamp_tx()
cx25840: fix unchecked return values
mceusb: sporadic RX truncation corruption fix
net: phy: avoid genphy_aneg_done() for PHYs without clause 22 support
ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull
e1000e: Undo e1000e_pm_freeze if __e1000_shutdown fails
perf/core: Correct event creation with PERF_FORMAT_GROUP
MIPS: mm: fixed mappings: correct initialisation
MIPS: mm: adjust PKMAP location
MIPS: kprobes: flush_insn_slot should flush only if probe initialised
Fix loop device flush before configure v3
net: emac: fix reset timeout with AR8035 phy
perf tests: Decompress kernel module before objdump
skbuff: only inherit relevant tx_flags
xen: avoid type warning in xchg_xen_ulong
bnx2x: Allow vfs to disable txvlan offload
sctp: fix recursive locking warning in sctp_do_peeloff
sparc64: ldc abort during vds iso boot
iio: magnetometer: st_magn_spi: fix spi_device_id table
Bluetooth: Send HCI Set Event Mask Page 2 command only when needed
cpuidle: dt: Add missing 'of_node_put()'
ACPICA: Events: Add runtime stub support for event APIs
ACPICA: Disassembler: Abort on an invalid/unknown AML opcode
s390/dasd: fix hanging safe offline
vxlan: dont migrate permanent fdb entries during learn
bcache: stop writeback thread after detaching
bcache: segregate flash only volume write streams
scsi: libsas: fix memory leak in sas_smp_get_phy_events()
scsi: libsas: fix error when getting phy events
scsi: libsas: initialize sas_phy status according to response of DISCOVER
blk-mq: fix kernel oops in blk_mq_tag_idle()
tty: n_gsm: Allow ADM response in addition to UA for control dlci
EDAC, mv64x60: Fix an error handling path
cxgb4vf: Fix SGE FL buffer initialization logic for 64K pages
perf tools: Fix copyfile_offset update of output offset
ipsec: check return value of skb_to_sgvec always
rxrpc: check return value of skb_to_sgvec always
virtio_net: check return value of skb_to_sgvec always
virtio_net: check return value of skb_to_sgvec in one more location
random: use lockless method of accessing and updating f->reg_idx
futex: Remove requirement for lock_page() in get_futex_key()
Kbuild: provide a __UNIQUE_ID for clang
arp: fix arp_filter on l3slave devices
net: fix possible out-of-bound read in skb_network_protocol()
net/ipv6: Fix route leaking between VRFs
netlink: make sure nladdr has correct size in netlink_connect()
net/sched: fix NULL dereference in the error path of tcf_bpf_init()
pptp: remove a buggy dst release in pptp_connect()
sctp: do not leak kernel memory to user space
sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6
sky2: Increase D3 delay to sky2 stops working after suspend
vhost: correctly remove wait queue during poll failure
vlan: also check phy_driver ts_info for vlan's real device
bonding: fix the err path for dev hwaddr sync in bond_enslave
bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave
bonding: process the err returned by dev_set_allmulti properly in bond_enslave
net: fool proof dev_valid_name()
ip_tunnel: better validate user provided tunnel names
ipv6: sit: better validate user provided tunnel names
ip6_gre: better validate user provided tunnel names
ip6_tunnel: better validate user provided tunnel names
vti6: better validate user provided tunnel names
r8169: fix setting driver_data after register_netdev
net sched actions: fix dumping which requires several messages to user space
net/ipv6: Increment OUTxxx counters after netfilter hook
ipv6: the entire IPv6 header chain must fit the first fragment
vrf: Fix use after free and double free in vrf_finish_output
Revert "xhci: plat: Register shutdown for xhci_plat"
Linux 4.4.128
Change-Id: I9c1e58f634cc18f15a840c9d192c892dfcc5ff73
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 82dd0d2a9a76fc8fa2b18d80b987d455728bf83a upstream.
Miguel reported an skb use after free / double free in vrf_finish_output
when neigh_output returns an error. The vrf driver should return after
the call to neigh_output as it takes over the skb on error path as well.
Patch is a simplified version of Miguel's patch which was written for 4.9,
and updated to top of tree.
Fixes: 8f58336d3f ("net: Add ethernet header for pass through VRF device")
Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ backport to 4.4 and 4.9 dropped the sock_confirm_neigh and
changed neigh_output to dst_neigh_output ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 19c9ea363a244f85f90a424f9936e6d56449e33c ]
pci_set_drvdata() is called only after registering the net_device,
therefore we could run into a NPE if one of the functions using
driver_data is called before it's set.
Fix this by calling pci_set_drvdata() before registering the
net_device.
This fix is a candidate for stable. As far as I can see the
bug has been there in kernel version 3.2 already, therefore
I can't provide a reference which commit is fixed by it.
The fix may need small adjustments per kernel version because
due to other changes the label which is jumped to if
register_netdev() fails has changed over time.
Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9f5a90c107741b864398f4ac0014711a8c1d8474 ]
When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails,
dev_set_promiscuity(-1) should be done before going to the err path.
Otherwise, dev->promiscuity will leak.
Fixes: 7e1a1ac1fb ("bonding: Check return of dev_set_promiscuity/allmulti")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ae42cc62a9f07f1f6979054ed92606b9c30f4a2e ]
Beniamino found a crash when adding vlan as slave of bond which is also
the parent link:
ip link add bond1 type bond
ip link set bond1 up
ip link add link bond1 vlan1 type vlan id 80
ip link set vlan1 master bond1
The call trace is as below:
[<ffffffffa850842a>] queued_spin_lock_slowpath+0xb/0xf
[<ffffffffa8515680>] _raw_spin_lock+0x20/0x30
[<ffffffffa83f6f07>] dev_mc_sync+0x37/0x80
[<ffffffffc08687dc>] vlan_dev_set_rx_mode+0x1c/0x30 [8021q]
[<ffffffffa83efd2a>] __dev_set_rx_mode+0x5a/0xa0
[<ffffffffa83f7138>] dev_mc_sync_multiple+0x78/0x80
[<ffffffffc084127c>] bond_enslave+0x67c/0x1190 [bonding]
[<ffffffffa8401909>] do_setlink+0x9c9/0xe50
[<ffffffffa8403bf2>] rtnl_newlink+0x522/0x880
[<ffffffffa8403ff7>] rtnetlink_rcv_msg+0xa7/0x260
[<ffffffffa8424ecb>] netlink_rcv_skb+0xab/0xc0
[<ffffffffa83fe498>] rtnetlink_rcv+0x28/0x30
[<ffffffffa8424850>] netlink_unicast+0x170/0x210
[<ffffffffa8424bf8>] netlink_sendmsg+0x308/0x420
[<ffffffffa83cc396>] sock_sendmsg+0xb6/0xf0
This is actually a dead lock caused by sync slave hwaddr from master when
the master is the slave's 'slave'. This dead loop check is actually done
by netdev_master_upper_dev_link. However, Commit 1f718f0f4f ("bonding:
populate neighbour's private on enslave") moved it after dev_mc_sync.
This patch is to fix it by moving dev_mc_sync after master_upper_dev_link,
so that this loop check would be earlier than dev_mc_sync. It also moves
if (mode == BOND_MODE_8023AD) into if (!bond_uses_primary) clause as an
improvement.
Note team driver also has this issue, I will fix it in another patch.
Fixes: 1f718f0f4f ("bonding: populate neighbour's private on enslave")
Reported-by: Beniamino Galvani <bgalvani@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5c78f6bfae2b10ff70e21d343e64584ea6280c26 ]
vlan_vids_add_by_dev is called right after dev hwaddr sync, so on
the err path it should unsync dev hwaddr. Otherwise, the slave
dev's hwaddr will never be unsync when this err happens.
Fixes: 1ff412ad77 ("bonding: change the bond's vlan syncing functions with the standard ones")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit afb133637071be6deeb8b3d0e55593ffbf63c527 ]
The sky2 ethernet stops working after system resume from suspend:
[ 582.852065] sky2 0000:04:00.0: Refused to change power state, currently in D3
The current 150ms delay is not enough, change it to 200ms can solve the
issue.
BugLink: https://bugs.launchpad.net/bugs/1758507
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernels that do not have f6b10209b90d ("virtio-net: switch to use
build_skb() for small buffer") will have an extra call to skb_to_sgvec
that is not handled by e2fcad58fd23 ("virtio_net: check return value of
skb_to_sgvec always"). Since the former does not appear to be stable
material, just fix the call up directly.
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2fcad58fd230f635a74e4e983c6f4ea893642d2 upstream.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[natechancellor: backport to 4.4]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ea0a42109aee7b92e631c4eb3f2219fadf58acdd ]
We'd come in with SGE_FL_BUFFER_SIZE[0] and [1] both equal to 64KB and
the extant logic would flag that as an error. This was already fixed in
cxgb4 driver with "92ddcc7 cxgb4: Fix some small bugs in
t4_sge_init_soft() when our Page Size is 64KB".
Original Work by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e0090a9e979de5202c7d16c635dea2f005221073 ]
This patch fixes vxlan_snoop to not move permanent fdb entries
on learn events. This is consistent with the bridge fdb
handling of permanent entries.
Fixes: 26a41ae604 ("vxlan: only migrate dynamic FDB entries")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 92f85f05caa51d844af6ea14ffbc7a786446a644 ]
VF clients are configured as enforced, meaning firmware is validating
the correctness of their ethertype/vid during transmission.
Once txvlan is disabled, VF would start getting SKBs for transmission
here vlan is on the payload - but it'll pass the packet's ethertype
instead of the vid, leading to firmware declaring it as malicious.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 19d90ece81da802207a9b91ce95a29fbdc40626e ]
This patch fixes a problem where the AR8035 PHY can't be
detected on an Cisco Meraki MR24, if the ethernet cable is
not connected on boot.
Russell Senior provided steps to reproduce the issue:
|Disconnect ethernet cable, apply power, wait until device has booted,
|plug in ethernet, check for interfaces, no eth0 is listed.
|
|This appears to be a problem during probing of the AR8035 Phy chip.
|When ethernet has no link, the phy detection fails, and eth0 is not
|created. Plugging ethernet later has no effect, because there is no
|interface as far as the kernel is concerned. The relevant part of
|the boot log looks like this:
|this is the failing case:
|
|[ 0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
|[ 0.882532] /plb/opb/ethernet@ef600c00: reset timeout
|[ 0.888546] /plb/opb/ethernet@ef600c00: can't find PHY!
|and the succeeding case:
|
|[ 0.876672] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
|[ 0.883952] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:01:..
|[ 0.890822] eth0: found Atheros 8035 Gigabit Ethernet PHY (0x01)
Based on the comment and the commit message of
commit 23fbb5a87c ("emac: Fix EMAC soft reset on 460EX/GT").
This is because the AR8035 PHY doesn't provide the TX Clock,
if the ethernet cable is not attached. This causes the reset
to timeout and the PHY detection code in emac_init_phy() is
unable to detect the AR8035 PHY. As a result, the emac driver
bails out early and the user left with no ethernet.
In order to stay compatible with existing configurations, the driver
tries the current reset approach at first. Only if the first attempt
timed out, it does perform one more retry with the clock temporarily
switched to the internal source for just the duration of the reset.
LEDE-Bug: #687 <https://bugs.lede-project.org/index.php?do=details&task_id=687>
Cc: Chris Blake <chrisrblake93@gmail.com>
Reported-by: Russell Senior <russell@personaltelco.net>
Fixes: 23fbb5a87c ("emac: Fix EMAC soft reset on 460EX/GT")
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 41408ad519f7a2a1c5229e61f2a97f4df1b61adc ]
Avoid calling genphy_aneg_done() for PHYs that do not implement the
Clause 22 register set.
Clause 45 PHYs may implement the Clause 22 register set along with the
Clause 22 extension MMD. Hence, we can't simply block access to the
Clause 22 functions based on the PHY being a Clause 45 PHY.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5012863b7347866764c4a4e58b62fb05346b0d06 ]
The e1000e driver and related hardware has a limitation on Tx PTP
packets which requires we limit to timestamping a single packet at once.
We do this by verifying that we never request a new Tx timestamp while
we still have a tx_hwtstamp_skb pointer.
Unfortunately the driver suffers from a race condition around this. The
tx_hwtstamp_skb pointer is not set to NULL until after skb_tstamp_tx()
is called. This function notifies the stack and applications of a new
timestamp. Even a well behaved application that only sends a new request
when the first one is finished might be woken up and possibly send
a packet before we can free the timestamp in the driver again. The
result is that we needlessly ignore some Tx timestamp requests in this
corner case.
Fix this by assigning the tx_hwtstamp_skb pointer prior to calling
skb_tstamp_tx() and use a temporary pointer to hold the timestamped skb
until that function finishes. This ensures that the application is not
woken up until the driver is ready to begin timestamping a new packet.
This ensures that well behaved applications do not accidentally race
with condition to skip Tx timestamps. Obviously an application which
sends multiple Tx timestamp requests at once will still only timestamp
one packet at a time. Unfortunately there is nothing we can do about
this.
Reported-by: David Mirabito <davidm@metamako.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 269f9883fe254d109afdfc657875c456d6fabb08 ]
The Granular QoS per VF feature must be enabled in FW before it can be
used.
Thus, the driver cannot modify a QP's qos_vport value (via the UPDATE_QP FW
command) if the feature has not been enabled -- the FW returns an error if
this is attempted.
Fixes: 08068cd568 ("net/mlx4: Added qos_vport QP configuration in VST mode")
Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6dc06c08bef1c746ff8da33dab677cfbacdcad32 ]
Our previous patch (cited below) introduced a regression
for RAW Eth QPs.
Fix it by checking if the QP number provided by user-space
exists, hence allowing steering rules to be added for valid
QPs only.
Fixes: 89c557687a32 ("net/mlx4_en: Avoid adding steering rules with invalid ring")
Reported-by: Or Gerlitz <gerlitz.or@gmail.com>
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a97051f4553551d13e586ab3cb6ae13093a44a81 ]
take care of UpDbgLaRdPtr[0-3] restriction for T6.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5ea6d691aac6c93b790f0905e3460d44cc4c449b ]
The driver may sleep under a write spin lock, and the function
call path is:
qlcnic_82xx_hw_write_wx_2M (acquire the lock by write_lock_irqsave)
crb_win_lock
qlcnic_pcie_sem_lock
usleep_range
qlcnic_82xx_hw_read_wx_2M (acquire the lock by write_lock_irqsave)
crb_win_lock
qlcnic_pcie_sem_lock
usleep_range
To fix it, the usleep_range is replaced with udelay.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 06d2d6431bc8d41ef5ffd8bd4b52cea9f72aed22 ]
Add NULL check before dereferencing pointer _id_ in order to avoid
a potential NULL pointer dereference.
Addresses-Coverity-ID: 1397995
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 26747211486c5bc7dd014c3caab206576e00c0d0 ]
Disable FW_OK flag while flashing Firmware. This will help to fix any
potential mailbox timeouts during Firmware flash.
Grab new devlog parameters after Firmware restart. When we FLASH new
Firmware onto an adapter, the new Firmware may have the Firmware Device Log
located at a different memory address or have a different size for it.
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f0d7ae95fff4ab444b8433f07afc4b077ef1a285 ]
Building the driver with CONFIG_SMP disabled results in a harmless
warning:
ethernet/mellanox/mlx5/core/main.c: In function 'mlx5_irq_set_affinity_hint':
ethernet/mellanox/mlx5/core/main.c:615:6: error: unused variable 'irq' [-Werror=unused-variable]
It's better to express the conditional compilation using IS_ENABLED()
here, as that lets the compiler see what the intented use for the variable
is, and that it can be silently discarded.
Fixes: b665d98edc9a ("net/mlx5: Tolerate irq_set_affinity_hint() failures")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fb3ce90b7d7761b6f7f28f0ff5c456ef6b5229a1 ]
syszkaller fuzzer triggered a divide by zero, when set calibration
through ioctl().
To fix it, test 'bitrate' if it is negative or 0, just return -EINVAL.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ac1181c60822292176ab96912208ec9f9819faf8 ]
Currently the less than zero error check on ret is incorrect
as it is checking a far earlier ret assignment rather than the
return from the call to wl1251_acx_arp_ip_filter. Fix this by
adding in the missing assginment.
Detected by CoverityScan, CID#1164835 ("Logically dead code")
Fixes: 204cc5c44f ("wl1251: implement hardware ARP filtering")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 797a93647a48d6cb8a20641a86a71713a947f786 ]
In the loadbalance arp monitoring scheme, when a slave link change is
detected, the slave->link is immediately updated and slave_state_changed
is set. Later down the function, the rtnl_lock is acquired and the
changes are committed, updating the bond link state.
However, the acquisition of the rtnl_lock can fail. The next time the
monitor runs, since slave->link is already updated, it determines that
link is unchanged. This results in the bond link state permanently out
of sync with the slave link.
This patch modifies bond_loadbalance_arp_mon() to handle link changes
identical to bond_ab_arp_{inspect/commit}(). The new link state is
maintained in slave->new_link until we're ready to commit at which point
it's copied into slave->link.
NOTE: miimon_{inspect/commit}() has a more complex state machine
requiring the use of the bond_{propose,commit}_link_state() functions
which maintains the intermediate state in slave->link_new_state. The arp
monitors don't require that.
Testing: This bug is very easy to reproduce with the following steps.
1. In a loop, toggle a slave link of a bond slave interface.
2. In a separate loop, do ifconfig up/down of an unrelated interface to
create contention for rtnl_lock.
Within a few iterations, the bond link goes out of sync with the slave
link.
Signed-off-by: Nithin Nayak Sujir <nsujir@tintri.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b665d98edc9ab295169be2fc5bb4e89a46de0a1a ]
Add tolerance to failures of irq_set_affinity_hint().
Its role is to give hints that optimizes performance,
and should not block the driver load.
In non-SMP systems, functionality is not available as
there is a single core, and all these calls definitely
fail. Hence, do not call the function and avoid the
warning prints.
Fixes: db058a186f ("net/mlx5_core: Set irq affinity hints")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e48d661eb13f2f83861428f001c567fdb3f317e8 ]
Using memcpy() from a buffer that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. In this case, the source was made longer, since it did not
match the destination structure size. Additionally removes a needless cast.
This was found with the future CONFIG_FORTIFY_SOURCE feature.
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8fed6823e06e43ee9cf7c0ffecec2f9111ce6201 ]
The AR5K_EEPROM_READ macro returns with -EIO if a read error
occurs causing a memory leak on the allocated buffer buf. Fix
this by explicitly calling ath5k_hw_nvram_read and exiting on
the via the freebuf label that performs the necessary free'ing
of buf when a read error occurs.
Detected by CoverityScan, CID#1248782 ("Resource Leak")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5f5c5449acad0cd3322e53e1ac68c044483b0aa5 ]
The MDIO initialization failure message is printed using the network
device, before it has been registered, leading to:
(null): failed to initialise MDIO
Use the platform device instead to fix this:
sh-eth ee700000.ethernet: failed to initialise MDIO
Fixes: daacf03f0b ("sh_eth: Register MDIO bus before registering the network device")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1c4d5f51a812a82de97beee24f48ed05c65ebda5 ]
There are several paths in vmxnet3, where settings changes cause the
adapter to be brought down and back up (vmxnet3_set_ringparam among
them). Should part of the reset operation fail, these paths call
vmxnet3_force_close, which enables all napi instances prior to calling
dev_close (with the expectation that vmxnet3_close will then properly
disable them again). However, vmxnet3_force_close neglects to clear
VMXNET3_STATE_BIT_QUIESCED prior to calling dev_close. As a result
vmxnet3_quiesce_dev (called from vmxnet3_close), returns early, and
leaves all the napi instances in a enabled state while the device itself
is closed. If a device in this state is activated again, napi_enable
will be called on already enabled napi_instances, leading to a BUG halt.
The fix is to simply enausre that the QUIESCED bit is cleared in
vmxnet3_force_close to allow quesence to be completed properly on close.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Shrikrishna Khare <skhare@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0fe20fafd1791f993806d417048213ec57b81045 ]
Currently rcode is being initialized to NX_RCODE_SUCCESS and later it
is checked to see if it is not NX_RCODE_SUCCESS which is never true. It
appears that there is an unintentional missing assignment of rcode from
the return of the call to netxen_issue_cmd() that was dropped in
an earlier fix, so add it in.
Detected by CoverityScan, CID#401900 ("Logically dead code")
Fixes: 2dcd5d95ad ("netxen_nic: fix cdrp race condition")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8d66c30b12ed3cb533696dea8b9a9eadd5da426a ]
The qca_spi driver causes alignment issues on ARM devices.
So fix this by using netdev_alloc_skb_ip_align().
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06ecf ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
