[ Upstream commit 48f5bccc60675f8426a6159935e8636a1fd89f56 ]
When users set flow control using ethtool the bits are set properly in the
CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n
Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size
reset value. When receive flow control is enabled on a port, the port's
associated FIFO block allocation must be adjusted. The port RX allocation
must increase to accommodate the flow control runout. The TRM recommends
numbers of 5 or 6.
Hence, apply required Port FIFO configuration to
Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during
interface initialization.
Cc: Schuyler Patton <spatton@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aeca3a77b1e0ed06a095933b89c86aed007383eb ]
The zero padding that is added to NTB's does
not zero the memory correctly.
This is because the skb_put modifies the value
of skb_out->len which results in the memset
command not setting any memory to zero as
(ctx->tx_max - skb_out->len) == 0.
I have resolved this by storing the size of
the memory to be zeroed before the skb_put
and using this in the memset call.
Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit df5303a8aa9a0a6934f4cea7427f1edf771f21c2 ]
Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.
This was found with the future CONFIG_FORTIFY_SOURCE feature.
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9e4eb1ce472fbf7b007f23c88ec11c37265e401c ]
Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.
This was found with the future CONFIG_FORTIFY_SOURCE feature.
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=nbr3
-----END PGP SIGNATURE-----
Merge 4.4.127 into android-4.4
Changes in 4.4.127
mtd: jedec_probe: Fix crash in jedec_read_mfr()
ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent()
ALSA: pcm: potential uninitialized return values
perf/hwbp: Simplify the perf-hwbp code, fix documentation
partitions/msdos: Unable to mount UFS 44bsd partitions
usb: gadget: define free_ep_req as universal function
usb: gadget: change len to size_t on alloc_ep_req()
usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_align
usb: gadget: align buffer size when allocating for OUT endpoint
usb: gadget: f_hid: fix: Prevent accessing released memory
kprobes/x86: Fix to set RWX bits correctly before releasing trampoline
ACPI, PCI, irq: remove redundant check for null string pointer
writeback: fix the wrong congested state variable definition
PCI: Make PCI_ROM_ADDRESS_MASK a 32-bit constant
dm ioctl: remove double parentheses
Input: mousedev - fix implicit conversion warning
netfilter: nf_nat_h323: fix logical-not-parentheses warning
genirq: Use cpumask_available() for check of cpumask variable
cpumask: Add helper cpumask_available()
selinux: Remove unnecessary check of array base in selinux_set_mapping()
fs: compat: Remove warning from COMPATIBLE_IOCTL
jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp
frv: declare jiffies to be located in the .data section
audit: add tty field to LOGIN event
tty: provide tty_name() even without CONFIG_TTY
netfilter: ctnetlink: Make some parameters integer to avoid enum mismatch
selinux: Remove redundant check for unknown labeling behavior
arm64: avoid overflow in VA_START and PAGE_OFFSET
xfrm_user: uncoditionally validate esn replay attribute struct
RDMA/ucma: Check AF family prior resolving address
RDMA/ucma: Fix use-after-free access in ucma_close
RDMA/ucma: Ensure that CM_ID exists prior to access it
RDMA/ucma: Check that device is connected prior to access it
RDMA/ucma: Check that device exists prior to accessing it
RDMA/ucma: Don't allow join attempts for unsupported AF family
RDMA/ucma: Introduce safer rdma_addr_size() variants
net: xfrm: use preempt-safe this_cpu_read() in ipcomp_alloc_tfms()
xfrm: Refuse to insert 32 bit userspace socket policies on 64 bit systems
netfilter: bridge: ebt_among: add more missing match size checks
netfilter: x_tables: add and use xt_check_proc_name
Bluetooth: Fix missing encryption refresh on Security Request
llist: clang: introduce member_address_is_nonnull()
scsi: virtio_scsi: always read VPD pages for multiqueue too
usb: dwc2: Improve gadget state disconnection handling
USB: serial: ftdi_sio: add RT Systems VX-8 cable
USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
USB: serial: cp210x: add ELDAT Easywave RX09 id
mei: remove dev_err message on an unsupported ioctl
media: usbtv: prevent double free in error case
parport_pc: Add support for WCH CH382L PCI-E single parallel port card.
crypto: ahash - Fix early termination in hash walk
crypto: x86/cast5-avx - fix ECB encryption when long sg follows short one
fs/proc: Stop trying to report thread stacks
staging: comedi: ni_mio_common: ack ai fifo error interrupts.
Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list
Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad
vt: change SGR 21 to follow the standards
Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition
ARM: dts: dra7: Add power hold and power controller properties to palmas
ARM: dts: am57xx-beagle-x15-common: Add overide powerhold property
md/raid10: reset the 'first' at the end of loop
net: hns: Fix ethtool private flags
nospec: Move array_index_nospec() parameter checking into separate macro
nospec: Kill array_index_nospec_mask_check()
Revert "PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()"
Revert "ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin"
Revert "ARM: dts: omap3-n900: Fix the audio CODEC's reset pin"
Revert "cpufreq: Fix governor module removal race"
Revert "mtip32xx: use runtime tag to initialize command header"
spi: davinci: fix up dma_mapping_error() incorrect patch
net: cavium: liquidio: fix up "Avoid dma_unmap_single on uninitialized ndata"
Revert "ip6_vti: adjust vti mtu according to mtu of lower device"
Linux 4.4.127
Change-Id: Ia3b9ed0a5b2ea6c682386dbee5337ed8413d1a53
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This fixes up commit 1d1cb76252 which was
commit 8e6ce7ebeb34f0992f56de078c3744fb383657fa upstream.
Ben writes:
This goto should not have been changed, as no DMA mapping has been
attempted at this point in the function.
This seems to have been fixed upstream by commit 6a885b60dad2 "liquidio:
Introduce new octeon2/3 header". I leave it to you to work out how it
should be fixed in 4.4-stable.
Fix this up by hand, as the referenced patch isn't worthy of being
backported.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d61d263c8d82db7c4404a29ebc29674b1c0c05c9 upstream.
The driver implementation returns support for private flags, while
no private flags are present. When asked for the number of private
flags it returns the number of statistic flag names.
Fix this by returning EOPNOTSUPP for not implemented ethtool flags.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=J/QG
-----END PGP SIGNATURE-----
Merge 4.4.126 into android-4.4
Changes in 4.4.126
scsi: sg: don't return bogus Sg_requests
Revert "genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs"
net: Fix hlist corruptions in inet_evict_bucket()
dccp: check sk for closed state in dccp_sendmsg()
ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()
l2tp: do not accept arbitrary sockets
net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred
net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface
net/iucv: Free memory obtained by kzalloc
netlink: avoid a double skb free in genlmsg_mcast()
net: Only honor ifindex in IP_PKTINFO if non-0
skbuff: Fix not waking applications when errors are enqueued
team: Fix double free in error path
s390/qeth: free netdevice when removing a card
s390/qeth: when thread completes, wake up all waiters
s390/qeth: lock read device while queueing next buffer
s390/qeth: on channel error, reject further cmd requests
ieee802154: 6lowpan: fix possible NULL deref in lowpan_device_event()
net: fec: Fix unbalanced PM runtime calls
net: systemport: Rewrite __bcm_sysport_tx_reclaim()
Linux 4.4.126
Change-Id: Ieb8140451241cca4625f18a616568a1963ea8b01
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 484d802d0f2f29c335563fcac2a8facf174a1bbc ]
There is no need for complex checking between the last consumed index
and current consumed index, a simple subtraction will do.
This also eliminates the possibility of a permanent transmit queue stall
under the following conditions:
- one CPU bursts ring->size worth of traffic (up to 256 buffers), to the
point where we run out of free descriptors, so we stop the transmit
queue at the end of bcm_sysport_xmit()
- because of our locking, we have the transmit process disable
interrupts which means we can be blocking the TX reclamation process
- when TX reclamation finally runs, we will be computing the difference
between ring->c_index (last consumed index by SW) and what the HW
reports through its register
- this register is masked with (ring->size - 1) = 0xff, which will lead
to stripping the upper bits of the index (register is 16-bits wide)
- we will be computing last_tx_cn as 0, which means there is no work to
be done, and we never wake-up the transmit queue, leaving it
permanently disabled
A practical example is e.g: ring->c_index aka last_c_index = 12, we
pushed 256 entries, HW consumer index = 268, we mask it with 0xff = 12,
so last_tx_cn == 0, nothing happens.
Fixes: 80105befdb ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a069215cf5985f3aa1bba550264907d6bd05c5f7 ]
When unbinding/removing the driver, we will run into the following warnings:
[ 259.655198] fec 400d1000.ethernet: 400d1000.ethernet supply phy not found, using dummy regulator
[ 259.665065] fec 400d1000.ethernet: Unbalanced pm_runtime_enable!
[ 259.672770] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
[ 259.683062] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1
[ 259.696239] libphy: fec_enet_mii_bus: probed
Avoid these warnings by balancing the runtime PM calls during fec_drv_remove().
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cbcc607e18422555db569b593608aec26111cb0b ]
The __send_and_alloc_skb() receives a skb ptr as a parameter but in
case it fails the skb is not valid:
- Send failed and released the skb internally.
- Allocation failed.
The current code tries to release the skb in case of failure which
causes redundant freeing.
Fixes: 9b00cf2d10 ("team: implement multipart netlink messages for options transfers")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f9db50691db4a7d860fce985f080bb3fc23a7ede ]
According to AM335x TRM[1] 14.3.6.2, AM437x TRM[2] 15.3.6.2 and
DRA7 TRM[3] 24.11.4.8.7.3.3, in-band mode in EXT_EN(bit18) register is only
available when PHY is configured in RGMII mode with 10Mbps speed. It will
cause some networking issues without RGMII mode, such as carrier sense
errors and low throughput. TI also mentioned this issue in their forum[4].
This patch adds the check mechanism for PHY interface with RGMII interface
type, the in-band mode can only be set in RGMII mode with 10Mbps speed.
References:
[1]: https://www.ti.com/lit/ug/spruh73p/spruh73p.pdf
[2]: http://www.ti.com/lit/ug/spruhl7h/spruhl7h.pdf
[3]: http://www.ti.com/lit/ug/spruic2b/spruic2b.pdf
[4]: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/640765/2392155
Suggested-by: Holsety Chen (陳憲輝) <Holsety.Chen@moxa.com>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Schuyler Patton <spatton@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 00777fac28ba3e126b9e63e789a613e8bd2cab25 ]
If the optional regulator is deferred, we must release some resources.
They will be re-allocated when the probe function will be called again.
Fixes: 6eacf31139 ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=AHKD
-----END PGP SIGNATURE-----
Merge 4.4.125 into android-4.4
Changes in 4.4.125
MIPS: ralink: Remove ralink_halt()
iio: st_pressure: st_accel: pass correct platform data to init
ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit
ALSA: aloop: Sync stale timer before release
ALSA: aloop: Fix access to not-yet-ready substream via cable
ALSA: hda/realtek - Always immediately update mute LED with pin VREF
mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs
PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
ahci: Add PCI-id for the Highpoint Rocketraid 644L card
clk: bcm2835: Protect sections updating shared registers
Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174
libata: fix length validation of ATAPI-relayed SCSI commands
libata: remove WARN() for DMA or PIO command without data
libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
libata: disable LPM for Crucial BX100 SSD 500GB drive
libata: Enable queued TRIM for Samsung SSD 860
libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions
libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version
mm/vmalloc: add interfaces to free unmapped page table
x86/mm: implement free pmd/pte page interfaces
drm/vmwgfx: Fix a destoy-while-held mutex problem.
drm/radeon: Don't turn off DP sink when disconnected
drm: udl: Properly check framebuffer mmap offsets
acpi, numa: fix pxm to online numa node associations
brcmfmac: fix P2P_DEVICE ethernet address generation
rtlwifi: rtl8723be: Fix loss of signal
tracing: probeevent: Fix to support minus offset from symbol
mtd: nand: fsl_ifc: Fix nand waitfunc return value
staging: ncpfs: memory corruption in ncp_read_kernel()
can: cc770: Fix stalls on rt-linux, remove redundant IRQ ack
can: cc770: Fix queue stall & dropped RTR reply
can: cc770: Fix use after free in cc770_tx_interrupt()
tty: vt: fix up tabstops properly
kvm/x86: fix icebp instruction handling
x86/build/64: Force the linker to use 2MB page size
x86/boot/64: Verify alignment of the LOAD segment
x86/entry/64: Don't use IST entry for #BP stack
perf/x86/intel: Don't accidentally clear high bits in bdw_limit_period()
staging: lustre: ptlrpc: kfree used instead of kvfree
kbuild: disable clang's default use of -fmerge-all-constants
bpf: skip unnecessary capability check
bpf, x64: increase number of passes
Linux 4.4.125
Change-Id: I14b307cd27ff088800174c74819a3ff1790b41ce
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 746201235b3f876792099079f4c6fea941d76183 upstream.
While waiting for the TX object to send an RTR, an external message with a
matching id can overwrite the TX data. In this case we must call the rx
routine and then try transmitting the message that was overwritten again.
The queue was being stalled because the RX event did not generate an
interrupt to wake up the queue again and the TX event did not happen
because the TXRQST flag is reset by the chip when new data is received.
According to the CC770 datasheet the id of a message object should not be
changed while the MSGVAL bit is set. This has been fixed by resetting the
MSGVAL bit before modifying the object in the transmit function and setting
it after. It is not enough to set & reset CPUUPD.
It is important to keep the MSGVAL bit reset while the message object is
being modified. Otherwise, during RTR transmission, a frame with matching
id could trigger an rx-interrupt, which would cause a race condition
between the interrupt routine and the transmit function.
Signed-off-by: Andri Yngvason <andri.yngvason@marel.com>
Tested-by: Richard Weinberger <richard@nod.at>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4353daf4905c0099fd25fa742e2ffd4a4bab26a upstream.
This has been reported to cause stalls on rt-linux.
Suggested-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andri Yngvason <andri.yngvason@marel.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78dc897b7ee67205423dbbc6b56be49fb18d15b5 upstream.
In commit c713fb071edc ("rtlwifi: rtl8821ae: Fix connection lost problem
correctly") a problem in rtl8821ae that caused loss of signal was fixed.
That same problem has now been reported for rtl8723be. Accordingly,
the ASPM L1 latency has been increased from 0 to 7 to fix the instability.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Tested-by: James Cameron <quozl@laptop.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 455f3e76cfc0d893585a5f358b9ddbe9c1e1e53b upstream.
The firmware has a requirement that the P2P_DEVICE address should
be different from the address of the primary interface. When not
specified by user-space, the driver generates the MAC address for
the P2P_DEVICE interface using the MAC address of the primary
interface and setting the locally administered bit. However, the MAC
address of the primary interface may already have that bit set causing
the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this
by using a random address instead to determine the P2P_DEVICE address.
Cc: stable@vger.kernel.org # 3.10.y
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=OCjx
-----END PGP SIGNATURE-----
Merge 4.4.124 into android-4.4
Changes in 4.4.124
tpm: fix potential buffer overruns caused by bit glitches on the bus
tpm_tis: fix potential buffer overruns caused by bit glitches on the bus
SMB3: Validate negotiate request must always be signed
CIFS: Enable encryption during session setup phase
staging: android: ashmem: Fix possible deadlock in ashmem_ioctl
platform/x86: asus-nb-wmi: Add wapf4 quirk for the X302UA
regulator: anatop: set default voltage selector for pcie
x86: i8259: export legacy_pic symbol
rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs
Input: ar1021_i2c - fix too long name in driver's device table
time: Change posix clocks ops interfaces to use timespec64
ACPI/processor: Fix error handling in __acpi_processor_start()
ACPI/processor: Replace racy task affinity logic
cpufreq/sh: Replace racy task affinity logic
genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs
i2c: i2c-scmi: add a MS HID
net: ipv6: send unsolicited NA on admin up
media/dvb-core: Race condition when writing to CAM
spi: dw: Disable clock after unregistering the host
ath: Fix updating radar flags for coutry code India
clk: ns2: Correct SDIO bits
scsi: virtio_scsi: Always try to read VPD pages
KVM: PPC: Book3S PR: Exit KVM on failed mapping
ARM: 8668/1: ftrace: Fix dynamic ftrace with DEBUG_RODATA and !FRAME_POINTER
iommu/omap: Register driver before setting IOMMU ops
md/raid10: wait up frozen array in handle_write_completed
NFS: Fix missing pg_cleanup after nfs_pageio_cond_complete()
tcp: remove poll() flakes with FastOpen
e1000e: fix timing for 82579 Gigabit Ethernet controller
ALSA: hda - Fix headset microphone detection for ASUS N551 and N751
IB/ipoib: Fix deadlock between ipoib_stop and mcast join flow
IB/ipoib: Update broadcast object if PKey value was changed in index 0
HSI: ssi_protocol: double free in ssip_pn_xmit()
IB/mlx4: Take write semaphore when changing the vma struct
IB/mlx4: Change vma from shared to private
ASoC: Intel: Skylake: Uninitialized variable in probe_codec()
Fix driver usage of 128B WQEs when WQ_CREATE is V1.
netfilter: xt_CT: fix refcnt leak on error path
openvswitch: Delete conntrack entry clashing with an expectation.
mmc: host: omap_hsmmc: checking for NULL instead of IS_ERR()
wan: pc300too: abort path on failure
qlcnic: fix unchecked return value
scsi: mac_esp: Replace bogus memory barrier with spinlock
infiniband/uverbs: Fix integer overflows
NFS: don't try to cross a mountpount when there isn't one there.
iio: st_pressure: st_accel: Initialise sensor platform data properly
mt7601u: check return value of alloc_skb
rndis_wlan: add return value validation
Btrfs: send, fix file hole not being preserved due to inline extent
mac80211: don't parse encrypted management frames in ieee80211_frame_acked
mfd: palmas: Reset the POWERHOLD mux during power off
mtip32xx: use runtime tag to initialize command header
staging: unisys: visorhba: fix s-Par to boot with option CONFIG_VMAP_STACK set to y
staging: wilc1000: fix unchecked return value
mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a
ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
ipmi/watchdog: fix wdog hang on panic waiting for ipmi response
ACPI / PMIC: xpower: Fix power_table addresses
drm/nouveau/kms: Increase max retries in scanout position queries.
bnx2x: Align RX buffers
power: supply: pda_power: move from timer to delayed_work
Input: twl4030-pwrbutton - use correct device for irq request
md/raid10: skip spare disk as 'first' disk
ia64: fix module loading for gcc-5.4
tcm_fileio: Prevent information leak for short reads
video: fbdev: udlfb: Fix buffer on stack
sm501fb: don't return zero on failure path in sm501fb_start()
net: hns: fix ethtool_get_strings overflow in hns driver
cifs: small underflow in cnvrtDosUnixTm()
rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks
rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL
perf tests kmod-path: Don't fail if compressed modules aren't supported
Bluetooth: hci_qca: Avoid setup failure on missing rampatch
media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt
drm/msm: fix leak in failed get_pages
RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo()
rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled.
media: bt8xx: Fix err 'bt878_probe()'
media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart
cros_ec: fix nul-termination for firmware build info
platform/chrome: Use proper protocol transfer function
mmc: avoid removing non-removable hosts during suspend
IB/ipoib: Avoid memory leak if the SA returns a different DGID
RDMA/cma: Use correct size when writing netlink stats
IB/umem: Fix use of npages/nmap fields
vgacon: Set VGA struct resource types
drm/omap: DMM: Check for DMM readiness after successful transaction commit
pty: cancel pty slave port buf's work in tty_release
coresight: Fix disabling of CoreSight TPIU
pinctrl: Really force states during suspend/resume
iommu/vt-d: clean up pr_irq if request_threaded_irq fails
ip6_vti: adjust vti mtu according to mtu of lower device
RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS
nfsd4: permit layoutget of executable-only files
clk: si5351: Rename internal plls to avoid name collisions
dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63
RDMA/ucma: Fix access to non-initialized CM_ID object
Linux 4.4.124
Change-Id: Iac6f5bda7941f032c5b1f58750e084140b0e3f23
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit b7573a0a27bfa8270dea9b145448f6884b7cacc1 ]
Reset the driver current tx read/write index to zero when inactiveps
nic out of sync with HW state. Wrong driver tx read/write index will
cause Tx fail.
Signed-off-by: Tsang-Shian Lin <thlin@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9dc7efd3978aa67ae598129d2a3f240b390ce508 ]
Function create_singlethread_workqueue() will return a NULL pointer if
there is no enough memory, and its return value should be validated
before using. However, in function rndis_wlan_bind(), its return value
is not checked. This may cause NULL dereference bugs. This patch fixes
it.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5fb01e91daf84ad1e50edfcf63116ecbe31e7ba7 ]
Function alloc_skb() will return a NULL pointer if there is no enough
memory. However, in function mt7601u_mcu_msg_alloc(), its return value
is not validated before it is used. This patch fixes it.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 91ec701a553cb3de470fd471c6fefe3ad1125455 ]
Function pci_find_ext_capability() may return 0, which is an invalid
address. In function qlcnic_sriov_virtid_fn(), its return value is used
without validation. This may result in invalid memory access bugs. This
patch fixes the bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2a39e7aa8a98f777f0732ca7125b6c9668791760 ]
In function pc300_pci_init_one(), on the ioremap error path, function
pc300_pci_remove_one() is called to free the allocated memory. However,
the path is not terminated, and the freed memory will be used later,
resulting in use-after-free bugs. This path fixes the bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5313eeccd2d7f486be4e5c7560e3e2be239ec8f7 ]
After an upgrade to Linux kernel v4.x the hardware timestamps of the
82579 Gigabit Ethernet Controller are different than expected.
The values that are being read are almost four times as big as before
the kernel upgrade.
The difference is that after the upgrade the driver sets the clock
frequency to 25MHz, where before the upgrade it was set to 96MHz. Intel
confirmed that the correct frequency for this network adapter is 96MHz.
Signed-off-by: Bernd Faust <berndfaust@gmail.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c0c345d4cacc6a1f39d4856f37dcf6e34f51a5e4 ]
As per latest regulatory update for India, channel 52, 56, 60, 64
is no longer restricted to DFS. Enabling DFS/no infra flags in driver
results in applying all DFS related restrictions (like doing CAC etc
before this channel moves to 'available state') for these channels
even though the country code is programmed as 'India' in he hardware,
fix this by relaxing the frequency range while applying RADAR flags
only if the country code is programmed to India. If the frequency range
needs to modified based on different country code, ath_is_radar_freq
can be extended/modified dynamically.
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=H2Hj
-----END PGP SIGNATURE-----
Merge 4.4.123 into android-4.4
Changes in 4.4.123
blkcg: fix double free of new_blkg in blkcg_init_queue
Input: tsc2007 - check for presence and power down tsc2007 during probe
staging: speakup: Replace BUG_ON() with WARN_ON().
staging: wilc1000: add check for kmalloc allocation failure.
HID: reject input outside logical range only if null state is set
drm: qxl: Don't alloc fbdev if emulation is not supported
ath10k: fix a warning during channel switch with multiple vaps
PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()
selinux: check for address length in selinux_socket_bind()
perf sort: Fix segfault with basic block 'cycles' sort dimension
i40e: Acquire NVM lock before reads on all devices
i40e: fix ethtool to get EEPROM data from X722 interface
perf tools: Make perf_event__synthesize_mmap_events() scale
drivers: net: xgene: Fix hardware checksum setting
drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)
ath10k: disallow DFS simulation if DFS channel is not enabled
perf probe: Return errno when not hitting any event
HID: clamp input to logical range if no null state
net/8021q: create device with all possible features in wanted_features
ARM: dts: Adjust moxart IRQ controller and flags
batman-adv: handle race condition for claims between gateways
of: fix of_device_get_modalias returned length when truncating buffers
solo6x10: release vb2 buffers in solo_stop_streaming()
scsi: ipr: Fix missed EH wakeup
media: i2c/soc_camera: fix ov6650 sensor getting wrong clock
timers, sched_clock: Update timeout for clock wrap
sysrq: Reset the watchdog timers while displaying high-resolution timers
Input: qt1070 - add OF device ID table
sched: act_csum: don't mangle TCP and UDP GSO packets
ASoC: rcar: ssi: don't set SSICR.CKDV = 000 with SSIWSR.CONT
spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer
tcp: sysctl: Fix a race to avoid unexpected 0 window from space
dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped
driver: (adm1275) set the m,b and R coefficients correctly for power
mm: Fix false-positive VM_BUG_ON() in page_cache_{get,add}_speculative()
blk-throttle: make sure expire time isn't too big
f2fs: relax node version check for victim data in gc
bonding: refine bond_fold_stats() wrap detection
braille-console: Fix value returned by _braille_console_setup
drm/vmwgfx: Fixes to vmwgfx_fb
vxlan: vxlan dev should inherit lowerdev's gso_max_size
NFC: nfcmrvl: Include unaligned.h instead of access_ok.h
NFC: nfcmrvl: double free on error path
ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks
ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks
powerpc: Avoid taking a data miss on every userspace instruction miss
net/faraday: Add missing include of of.h
ARM: dts: koelsch: Correct clock frequency of X2 DU clock input
reiserfs: Make cancel_old_flush() reliable
ALSA: firewire-digi00x: handle all MIDI messages on streaming packets
fm10k: correctly check if interface is removed
scsi: ses: don't get power status of SES device slot on probe
apparmor: Make path_max parameter readonly
iommu/iova: Fix underflow bug in __alloc_and_insert_iova_range
video: ARM CLCD: fix dma allocation size
drm/radeon: Fail fb creation from imported dma-bufs.
drm/amdgpu: Fail fb creation from imported dma-bufs. (v2)
coresight: Fixes coresight DT parse to get correct output port ID.
MIPS: BPF: Quit clobbering callee saved registers in JIT code.
MIPS: BPF: Fix multiple problems in JIT skb access helpers.
MIPS: r2-on-r6-emu: Fix BLEZL and BGTZL identification
MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters
regulator: isl9305: fix array size
md/raid6: Fix anomily when recovering a single device in RAID6.
usb: dwc2: Make sure we disconnect the gadget state
usb: gadget: dummy_hcd: Fix wrong power status bit clear/reset in dummy_hub_control()
drivers/perf: arm_pmu: handle no platform_device
perf inject: Copy events when reordering events in pipe mode
perf session: Don't rely on evlist in pipe mode
scsi: sg: check for valid direction before starting the request
scsi: sg: close race condition in sg_remove_sfp_usercontext()
kprobes/x86: Fix kprobe-booster not to boost far call instructions
kprobes/x86: Set kprobes pages read-only
pwm: tegra: Increase precision in PWM rate calculation
wil6210: fix memory access violation in wil_memcpy_from/toio_32
drm/edid: set ELD connector type in drm_edid_to_eld()
video/hdmi: Allow "empty" HDMI infoframes
HID: elo: clear BTN_LEFT mapping
ARM: dts: exynos: Correct Trats2 panel reset line
sched: Stop switched_to_rt() from sending IPIs to offline CPUs
sched: Stop resched_cpu() from sending IPIs to offline CPUs
test_firmware: fix setting old custom fw path back on exit
net: xfrm: allow clearing socket xfrm policies.
mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()
ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin
ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
ath10k: update tdls teardown state to target
cpufreq: Fix governor module removal race
clk: qcom: msm8916: fix mnd_width for codec_digcodec
ath10k: fix invalid STS_CAP_OFFSET_MASK
tools/usbip: fixes build with musl libc toolchain
spi: sun6i: disable/unprepare clocks on remove
scsi: core: scsi_get_device_flags_keyed(): Always return device flags
scsi: devinfo: apply to HP XP the same flags as Hitachi VSP
scsi: dh: add new rdac devices
media: cpia2: Fix a couple off by one bugs
veth: set peer GSO values
drm/amdkfd: Fix memory leaks in kfd topology
agp/intel: Flush all chipset writes after updating the GGTT
mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED
mac80211: remove BUG() when interface type is invalid
ASoC: nuc900: Fix a loop timeout test
ipvlan: add L2 check for packets arriving via virtual devices
rcutorture/configinit: Fix build directory error message
ima: relax requiring a file signature for new files with zero length
selftests/x86/entry_from_vm86: Exit with 1 if we fail
selftests/x86: Add tests for User-Mode Instruction Prevention
selftests/x86: Add tests for the STR and SLDT instructions
selftests/x86/entry_from_vm86: Add test cases for POPF
x86/vm86/32: Fix POPF emulation
x86/mm: Fix vmalloc_fault to use pXd_large
ALSA: pcm: Fix UAF in snd_pcm_oss_get_formats()
ALSA: hda - Revert power_save option default value
ALSA: seq: Fix possible UAF in snd_seq_check_queue()
ALSA: seq: Clear client entry before deleting else at closing
drm/amdgpu/dce: Don't turn off DP sink when disconnected
fs: Teach path_connected to handle nfs filesystems with multiple roots.
lock_parent() needs to recheck if dentry got __dentry_kill'ed under it
fs/aio: Add explicit RCU grace period when freeing kioctx
fs/aio: Use RCU accessors for kioctx_table->table[]
irqchip/gic-v3-its: Ensure nr_ites >= nr_lpis
scsi: sg: fix SG_DXFER_FROM_DEV transfers
scsi: sg: fix static checker warning in sg_is_valid_dxfer
scsi: sg: only check for dxfer_len greater than 256M
ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux
btrfs: alloc_chunk: fix DUP stripe size handling
btrfs: Fix use-after-free when cleaning up fs_devs with a single stale device
USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
usb: gadget: bdc: 64-bit pointer capability check
bpf: fix incorrect sign extension in check_alu_op()
Linux 4.4.123
Change-Id: Ieb89411248f93522dde29edb8581f8ece22e33a7
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 92ff42645028fa6f9b8aa767718457b9264316b4 ]
Packets that don't have dest mac as the mac of the master device should
not be entertained by the IPvlan rx-handler. This is mostly true as the
packet path mostly takes care of that, except when the master device is
a virtual device. As demonstrated in the following case -
ip netns add ns1
ip link add ve1 type veth peer name ve2
ip link add link ve2 name iv1 type ipvlan mode l2
ip link set dev iv1 netns ns1
ip link set ve1 up
ip link set ve2 up
ip -n ns1 link set iv1 up
ip addr add 192.168.10.1/24 dev ve1
ip -n ns1 addr 192.168.10.2/24 dev iv1
ping -c2 192.168.10.2
<Works!>
ip neigh show dev ve1
ip neigh show 192.168.10.2 lladdr <random> dev ve1
ping -c2 192.168.10.2
<Still works! Wrong!!>
This patch adds that missing check in the IPvlan rx-handler.
Reported-by: Amit Sikka <amit.sikka@ericsson.com>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e16ea4bb516bc21ea2202f2107718b29218bea59 ]
Enforce using PS_MANUAL_POLL in ps hwsim debugfs to trigger a poll,
only if PS_ENABLED was set before.
This is required due to commit c9491367b759 ("mac80211: always update the
PM state of a peer on MGMT / DATA frames") that enforces the ap to
check only mgmt/data frames ps bit, and then update station's power save
accordingly.
When sending only ps-poll (control frame) the ap will not be aware that
the station entered power save.
Setting ps enable before triggering ps_poll, will send NDP with PM bit
enabled first.
Signed-off-by: Adiel Aloni <adiel.aloni@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 72d24955b44a4039db54a1c252b5031969eeaac3 ]
When new veth is created, and GSO values have been configured
on one device, clone those values to the peer.
For example:
# ip link add dev vm1 gso_max_size 65530 type veth peer name vm2
This should create vm1 <--> vm2 with both having GSO maximum
size set to 65530.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8cec57f5277ef0e354e37a0bf909dc71bc1f865b ]
The 10.4 firmware defines this as a 3-bit field, as does the
mac80211 stack. The 4th bit is defined as CONF_IMPLICIT_BF
at least in the firmware header I have seen. This patch
fixes the ath10k wmi header to match the firmware.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 424ea0d174e82365f85c6770225dba098b8f1d5f ]
It is required to update the teardown state of the peer when
a tdls link with that peer is terminated. This information is
useful for the target to perform some cleanups wrt the tdls peer.
Without proper cleanup, target assumes that the peer is connected and
blocks future connection requests, updating the teardown state of the
peer addresses the problem.
Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version.
Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0f6edfe2bbbb59d161580cb4870fcc46f5490f85 ]
In case count is not multiple of 4, there is a read access in
wil_memcpy_toio_32() from outside src buffer boundary.
In wil_memcpy_fromio_32(), in case count is not multiple of 4, there is
a write access to outside dst io memory boundary.
Fix these issues with proper handling of the last 1 to 4 copied bytes.
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d39004ab136ebb6949a7dda9d24376f3d6209295 ]
Breaking the include loop netdevice.h, dsa.h, devlink.h broke this
driver, it depends on includes brought in by these headers. Adding
linux/of.h fixes it.
Fixes: ed0e39e97d34 ("net: break include loop netdevice.h, dsa.h, devlink.h")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d6acfeb17d030bb3907e77c048b0e7783ad8e5a9 ]
vxlan dev currently ignores lowerdev's gso_max_size, which adversely
affects TSO performance of liquidio if it's the lowerdev. Egress TCP
packets' skb->len often exceed liquidio's advertised gso_max_size. This
may happen on other NIC drivers.
Fix it by assigning lowerdev's gso_max_size to that of vxlan dev. Might as
well do likewise for gso_max_segs.
Single flow TSO throughput of liquidio as lowerdev (using iperf3):
Before the patch: 139 Mbps
After the patch : 8.68 Gbps
Percent increase: 6,144 %
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 142c6594acbcc32391af9c15f8cd65c6c177698f ]
Some device drivers reset their stats at down/up events, possibly
fooling bonding stats, since they operate with relative deltas.
It is nearly not possible to fix drivers, since some of them compute the
tx/rx counters based on per rx/tx queue stats, and the queues can be
reconfigured (ethtool -L) between the down/up sequence.
Lets avoid accumulating 'negative' values that render bonding stats
useless.
It is better to lose small deltas, assuming the bonding stats are
fetched at a reasonable frequency.
Fixes: 5f0c5f73e5 ("bonding: make global bonding stats more reliable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ca07baab0b1e627ae1d4a55d190fb1c9d32a3445 ]
If DFS is not enabled in hostapd (ieee80211h=0) DFS channels shall
not be available for use even though the hardware may have the capability
to support DFS. With this configuration (DFS disabled in hostapd) trying to
bring up ath10k device in DFS channel for AP mode fails and trying to
simulate DFS in ath10k debugfs results in a warning in cfg80211 complaining
invalid channel and this should be avoided in the driver itself rather than
false propogating RADAR detection to mac80211/cfg80211. Fix this by
checking for the first vif 'is_started' state(should work for client mode
as well) as all the vifs shall be configured for the same channel
sys/kernel/debug/ieee80211/phy1/ath10k# echo 1 > dfs_simulate_radar
WARNING: at net/wireless/chan.c:265 cfg80211_radar_event+0x24/0x60
Workqueue: phy0 ieee80211_dfs_radar_detected_work [mac80211]
[<c022f2d4>] (warn_slowpath_null) from
[<bf72dab8>] (cfg80211_radar_event+0x24/0x60 [cfg80211])
[<bf72dab8>] (cfg80211_radar_event [cfg80211]) from
[<bf7813e0>] (ieee80211_dfs_radar_detected_work+0x94/0xa0 [mac80211])
[<bf7813e0>] (ieee80211_dfs_radar_detected_work [mac80211]) from
[<c0242320>] (process_one_work+0x20c/0x32c)
WARNING: at net/wireless/nl80211.c:2488 nl80211_get_mpath+0x13c/0x4cc
Workqueue: phy0 ieee80211_dfs_radar_detected_work [mac80211]
[<c022f2d4>] (warn_slowpath_null) from
[<bf72dab8>] (cfg80211_radar_event+0x24/0x60 [cfg80211])
[<bf72dab8>] (cfg80211_radar_event [cfg80211]) from
[<bf7813e0>] (ieee80211_dfs_radar_detected_work+0x94/0xa0 [mac80211])
[<bf7813e0>] (ieee80211_dfs_radar_detected_work [mac80211]) from
[<c0242320>] (process_one_work+0x20c/0x32c)
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e026e700d940a1ea3d3bc84d92ac668b1f015462 ]
This patch fixes the hardware checksum settings by properly program
the classifier. Otherwise, packet may be received with checksum error
on X-Gene1 SoC.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c271dd6c391b535226cf1a81aaad9f33cb5899d3 ]
Currently ethtool -e will error out with a X722 interface
as its EEPROM has a scope limit at offset 0x5B9FFF.
This patch fixes the issue by setting the EEPROM length to
the scope limit to avoid NVM read failure beyond that.
Change-ID: I0b7d4dd6c7f2a57cace438af5dffa0f44c229372
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 96a39aed25e6559b160786117df124084feb9080 ]
Acquire NVM lock before reads on all devices. Previously, locks were
only used for X722 and later. Fixes an issue where simultaneous X710
NVM accesses were interfering with each other.
Change-ID: If570bb7acf958cef58725ec2a2011cead6f80638
Signed-off-by: Aaron Salter <aaron.k.salter@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c73f8c00330f59ce9b1ace9ff698aca83390d358 ]
Doing a channel switch via hostapd_cli seems to update
the new channel context for each VAP's appropriately as below
in 'ath10k_mac_update_vif_chan', hence we can safely suppress the
warning that shows up during this operation and dump the warning only
if no vaps are available for channel switch
hostapd_cli -i wlan0 chan_switch 5 5200
OK
ath10k_pci : mac chanctx switch n_vifs 3 mode 1
ath10k_pci : mac chanctx switch vdev_id 2 freq 5180->5200 width 0->0
ath10k_pci : mac chanctx switch vdev_id 1 freq 5180->5200 width 0->0
ath10k_pci : mac chanctx switch vdev_id 0 freq 5180->5200 width 0->0
Call Trace:
WARNING: backports-20161201-3.14.77-9ab3068/drivers/net/wireless/ath/ath10k/mac.c:7126
[<c022f2d4>] (warn_slowpath_null) from [<bf7f150c>]
(ath10k_reconfig_complete+0xe4/0x25c [ath10k_core])
[<bf7f150c>] (ath10k_reconfig_complete [ath10k_core])
[<bf7f35f0>] (ath10k_mac_vif_ap_csa_work+0x214/0x370 [ath10k_core])
[<bf7f38b8>] (ath10k_mac_op_change_chanctx+0x108/0x128 [ath10k_core])
[<bf782ac0>] (ieee80211_recalc_chanctx_min_def+0x30c/0x430 [mac80211])
[<bf7830a4>] (ieee80211_recalc_smps_chanctx+0x2ec/0x840 [mac80211])
[<bf7843e8>] (ieee80211_vif_use_reserved_context+0x7c/0xf8 [mac80211])
[<bf7843e8>] (ieee80211_vif_use_reserved_context [mac80211])
[<bf76e5d4>] (ieee80211_csa_finalize_work+0x5c/0x88 [mac80211])
Fixes: d7bf4b4aba ("ath10k: fix ar->rx_channel updating logic")
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=KZem
-----END PGP SIGNATURE-----
Merge 4.4.121 into android-4.4
Changes in 4.4.121
tpm: st33zp24: fix potential buffer overruns caused by bit glitches on the bus
tpm_i2c_infineon: fix potential buffer overruns caused by bit glitches on the bus
tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on the bus
ALSA: usb-audio: Add a quirck for B&W PX headphones
ALSA: hda: Add a power_save blacklist
cpufreq: s3c24xx: Fix broken s3c_cpufreq_init()
media: m88ds3103: don't call a non-initalized function
nospec: Allow index argument to have const-qualified type
ARM: mvebu: Fix broken PL310_ERRATA_753970 selects
KVM: mmu: Fix overlap between public and private memslots
x86/syscall: Sanitize syscall table de-references under speculation fix
btrfs: Don't clear SGID when inheriting ACLs
ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux
x86/apic/vector: Handle legacy irq data correctly
leds: do not overflow sysfs buffer in led_trigger_show
x86/spectre: Fix an error message
Revert "led: core: Fix brightness setting when setting delay_off=0"
bridge: check brport attr show in brport_show
fib_semantics: Don't match route with mismatching tclassid
hdlc_ppp: carrier detect ok, don't turn off negotiation
ipv6 sit: work around bogus gcc-8 -Wrestrict warning
net: fix race on decreasing number of TX queues
net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68
netlink: ensure to loop over all netns in genlmsg_multicast_allns()
ppp: prevent unregistered channels from connecting to PPP units
udplite: fix partial checksum initialization
sctp: fix dst refcnt leak in sctp_v4_get_dst
sctp: fix dst refcnt leak in sctp_v6_get_dst()
s390/qeth: fix SETIP command handling
s390/qeth: fix IPA command submission race
sctp: verify size of a new chunk in _sctp_make_chunk()
net: mpls: Pull common label check into helper
mpls, nospec: Sanitize array index in mpls_label_ok()
dm io: fix duplicate bio completion due to missing ref count
bpf, x64: implement retpoline for tail call
btrfs: preserve i_mode if __btrfs_set_acl() fails
Linux 4.4.121
Change-Id: Ifc1f73c407f35cc1815e6f69bbed838c8ca60bc2
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 77f840e3e5f09c6d7d727e85e6e08276dd813d11 ]
PPP units don't hold any reference on the channels connected to it.
It is the channel's responsibility to ensure that it disconnects from
its unit before being destroyed.
In practice, this is ensured by ppp_unregister_channel() disconnecting
the channel from the unit before dropping a reference on the channel.
However, it is possible for an unregistered channel to connect to a PPP
unit: register a channel with ppp_register_net_channel(), attach a
/dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel
with ppp_unregister_channel() and finally connect the /dev/ppp file to
a PPP unit with ioctl(PPPIOCCONNECT).
Once in this situation, the channel is only held by the /dev/ppp file,
which can be released at anytime and free the channel without letting
the parent PPP unit know. Then the ppp structure ends up with dangling
pointers in its ->channels list.
Prevent this scenario by forbidding unregistered channels from
connecting to PPP units. This maintains the code logic by keeping
ppp_unregister_channel() responsible from disconnecting the channel if
necessary and avoids modification on the reference counting mechanism.
This issue seems to predate git history (successfully reproduced on
Linux 2.6.26 and earlier PPP commits are unrelated).
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b6c3bad1ba83af1062a7ff6986d9edc4f3d7fc8e ]
Sometimes when physical lines have a just good noise to make the protocol
handshaking fail, but the carrier detect still good. Then after remove of
the noise, nobody will trigger this protocol to be start again to cause
the link to never come back. The fix is when the carrier is still on, not
terminate the protocol handshaking.
Signed-off-by: Denis Du <dudenis2000@yahoo.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=jkg+
-----END PGP SIGNATURE-----
Merge 4.4.120 into android-4.4
Changes in 4.4.120
hrtimer: Ensure POSIX compliance (relative CLOCK_REALTIME hrtimers)
f2fs: fix a bug caused by NULL extent tree
mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM
ipv6: icmp6: Allow icmp messages to be looped back
ARM: 8731/1: Fix csum_partial_copy_from_user() stack mismatch
sget(): handle failures of register_shrinker()
drm/nouveau/pci: do a msi rearm on init
spi: atmel: fixed spin_lock usage inside atmel_spi_remove
net: arc_emac: fix arc_emac_rx() error paths
scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error
ARM: dts: ls1021a: fix incorrect clock references
lib/mpi: Fix umul_ppmm() for MIPS64r6
tg3: Add workaround to restrict 5762 MRRS to 2048
tg3: Enable PHY reset in MTU change path for 5720
bnx2x: Improve reliability in case of nested PCI errors
led: core: Fix brightness setting when setting delay_off=0
s390/dasd: fix wrongly assigned configuration data
IB/mlx4: Fix mlx4_ib_alloc_mr error flow
IB/ipoib: Fix race condition in neigh creation
xfs: quota: fix missed destroy of qi_tree_lock
xfs: quota: check result of register_shrinker()
e1000: fix disabling already-disabled warning
drm/ttm: check the return value of kzalloc
mac80211: mesh: drop frames appearing to be from us
can: flex_can: Correct the checking for frame length in flexcan_start_xmit()
bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine.
xen-netfront: enable device after manual module load
mdio-sun4i: Fix a memory leak
SolutionEngine771x: fix Ether platform data
xen/gntdev: Fix off-by-one error when unmapping with holes
xen/gntdev: Fix partial gntdev_mmap() cleanup
sctp: make use of pre-calculated len
net: gianfar_ptp: move set_fipers() to spinlock protecting area
MIPS: Implement __multi3 for GCC7 MIPS64r6 builds
Linux 4.4.120
Change-Id: Ie363d2e798f7bbe76e728c995e605af94667dfe5
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 11d827a993a969c3c6ec56758ff63a44ba19b466 ]
set_fipers() calling should be protected by spinlock in
case that any interrupt breaks related registers setting
and the function we expect. This patch is to move set_fipers()
to spinlock protecting area in ptp_gianfar_adjtime().
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
