Support group mi2s driver for sec/tert/quat mi2s interface in
msm8996.
Change-Id: I656612ca104c80770e316bc4d541d2ae56164e61
Signed-off-by: Cong Tang <congt@codeaurora.org>
Add DT node for early domain driver for msm8996 cdp
boards and remove reserved memory node for lk_pool
as it will be populated by bootloader if early domain
is enabled.
Change-Id: Iedcb4b47544a2355e98429a786d246351fdca75e
Signed-off-by: Vivek Kumar <vivekuma@codeaurora.org>
'Commit f09d23c34f2f ("ARM: dts: msm: Disable runtime PM in host
mode for automotive")' was disabling runtime PM in host mode for
automotive targets. This lead to leakage being observed on 1.8V
regulator for the USB2 PHY in target RBSC state. Revert this to
avoid the leakage.
Change-Id: Ia5da723764c289612d74287af8cf87f22e852abb
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Revise group afe port id for secondary and tertiary due to adsp
firmware definition change.
Change-Id: I829437bc7ac7ff5159a86f667b7a5b58f36e0c66
Signed-off-by: Cong Tang <congt@codeaurora.org>
SR was changed from 8kHz to 48kHz due to capturing
of garbled VI sense data as per HW team suggestion.
With new speaker protection algo in dsp, 8kHz is
expected and earlier issue with 8kHz is not seen.
Reverting the SR change back to 8kHz.
CRs-Fixed: 2364486
Change-Id: I379a080eb17e7a82fe87608f89dcbfa5444e8916
Signed-off-by: Soumya Managoli <smanag@codeaurora.org>
SR was changed from 8kHz to 48kHz due to capturing
of garbled VI sense data as per HW team suggestion.
With new speaker protection algo in dsp, 8kHz is
expected and earlier issue with 8kHz is not seen.
Reverting the SR change back to 8kHz.
CRs-Fixed: 2364486
Change-Id: I29947f87f182fc1de7a7002fcee0899b0f622103
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
The patch adds an additional check to not free the clients memory
if the client has a designated property of allocate-on-request.
Change-Id: Iecf5886034ccd052ab82fff18cc66f1868604284
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
Support tertiary mi2s group device feature for msm8996.
Change-Id: Ifb0cf8fae13961bef6938cc6f99ecbd5740b2985
Signed-off-by: Cong Tang <congt@codeaurora.org>
Early domain core driver provides apis to communicate
with LK. Deprecate the use of scratch registers, instead
use the new apis. Early domain core driver now hot adds
the cpu and frees lk text section by taking vote from
all early serivces, So remove hot-adding cpu and freeing
lk text section from display.
Change-Id: Id083850872bca0803e029a85f946c70b2ec5298e
Signed-off-by: Vivek Kumar <vivekuma@codeaurora.org>
Early domain core driver provides apis to communicate
with LK instead of using scratch registers
Change-Id: If312307d0b2eec7a40faf8575a7ad12451408c7c
Signed-off-by: E V Ravi <evenka@codeaurora.org>
Allocate all memory given to remote subsystem in the kernel
instead of mapping memory allocated in userspace.
Change-Id: I79c1f40d426e271403afa67514714fe6af26cf4e
Acked-by: Thyagarajan Venkatanarayanan <venkatan@qti.qualcomm.com>
Signed-off-by: Tharun Kumar Merugu <mtharu@codeaurora.org>
When splash releases resource, kernel blob property should
be updated at first, and then uevent sending follows.
This sequence can ensure user can always get the correct
information after kernel blob property is updated in
splash handoff thread.
Change-Id: I7b6493943c6eb1624da75dff5252dd3a71dea657
Signed-off-by: Guchun Chen <guchunc@codeaurora.org>
The SPMI based PMICs have the HIGH and LOW GPIO output
strength mappings interchanged, fix them.
Keep the mapping same for older SSBI based PMICs.
CRs-Fixed: 2246473
Change-Id: I4ec78469c436b54642ee67108943c82fba46e1c4
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Add support for creation of misc device in case
the connected device has 0x05C6 VID and 0x901F PID.
Change-Id: I594b579affe9382138def16e6d82ddc55ae93ec7
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Add support for creation of diag traffic channel in case
the connected device has 0x05C6 VID and 0x901F PID.
Change-Id: I460c0b1e54e88e336081b0ea87cc6342628ec516
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Add DT node for early domain driver for
msm8996 and remove reserved memory node
for lk_pool as it will be populated by
bootloader if early domain is enabled.
Change-Id: Idd364e2bfab97af78292b1e6a6e172a7b7c4c3a0
Signed-off-by: Vivek Kumar <vivekuma@codeaurora.org>
Invalid type conversion with x64 bit command VIDIOC_MSM_LASER_LED_CFG
passed in,for which the type should be "msm_laser_led_cfg_data_t"
Change-Id: I43e112224c612fb5390fa5fc23e8ae9c0e553288
CRs-Fixed: 2299699
Signed-off-by: Abhishek Abbanaveni <aabban@codeaurora.org>
Signed-off-by: E V Ravi <evenka@codeaurora.org>
There is a possibility of use-after-free and
double free because of not marking buffer as
NULL after freeing. The patch marks buffer
as NULL after freeing in error case.
Change-Id: Iacf8f8a4a4e644f48c87d5445ccd594766f2e156
Signed-off-by: Hardik Arya <harya@codeaurora.org>
Remove CONFIG_USELIB configuration to make kernel compliance
with android Vendor test suite.
Change-Id: I7ca9bbff514f318e595d44e56611b4f1fe6e8c65
Signed-off-by: Venkata Rao Kakani <vkakani@codeaurora.org>
