Commit graph

567968 commits

Author SHA1 Message Date
Shu Wang
87509592ec ftrace: Fix kmemleak in unregister_ftrace_graph
commit 2b0b8499ae75df91455bbeb7491d45affc384fb0 upstream.

The trampoline allocated by function tracer was overwriten by function_graph
tracer, and caused a memory leak. The save_global_trampoline should have
saved the previous trampoline in register_ftrace_graph() and restored it in
unregister_ftrace_graph(). But as it is implemented, save_global_trampoline was
only used in unregister_ftrace_graph as default value 0, and it overwrote the
previous trampoline's value. Causing the previous allocated trampoline to be
lost.

kmmeleak backtrace:
    kmemleak_vmalloc+0x77/0xc0
    __vmalloc_node_range+0x1b5/0x2c0
    module_alloc+0x7c/0xd0
    arch_ftrace_update_trampoline+0xb5/0x290
    ftrace_startup+0x78/0x210
    register_ftrace_function+0x8b/0xd0
    function_trace_init+0x4f/0x80
    tracing_set_tracer+0xe6/0x170
    tracing_set_trace_write+0x90/0xd0
    __vfs_write+0x37/0x170
    vfs_write+0xb2/0x1b0
    SyS_write+0x55/0xc0
    do_syscall_64+0x67/0x180
    return_from_SYSCALL_64+0x0/0x6a

[
  Looking further into this, I found that this was left over from when the
  function and function graph tracers shared the same ftrace_ops. But in
  commit 5f151b2401 ("ftrace: Fix function_profiler and function tracer
  together"), the two were separated, and the save_global_trampoline no
  longer was necessary (and it may have been broken back then too).
  -- Steven Rostedt
]

Link: http://lkml.kernel.org/r/20170912021454.5976-1-shuwang@redhat.com

Fixes: 5f151b2401 ("ftrace: Fix function_profiler and function tracer together")
Signed-off-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:33 +02:00
Alexander Shishkin
60623d7ca3 stm class: Fix a use-after-free
commit fd085bb1766d6a598f53af2308374a546a49775a upstream.

For reasons unknown, the stm_source removal path uses device_destroy()
to kill the underlying device object. Because device_destroy() uses
devt to look for the device to destroy and the fact that stm_source
devices don't have one (or all have the same one), it just picks the
first device in the class, which may well be the wrong one.

That is, loading stm_console and stm_heartbeat and then removing both
will die in dereferencing a freed object.

Since this should have been device_unregister() in the first place,
use it instead of device_destroy().

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: 7bd1d4093c ("stm class: Introduce an abstraction for System Trace Module devices")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:33 +02:00
Olaf Hering
c85e9442f9 Drivers: hv: fcopy: restore correct transfer length
commit 549e658a0919e355a2b2144dc380b3729bef7f3e upstream.

Till recently the expected length of bytes read by the
daemon did depend on the context. It was either hv_start_fcopy or
hv_do_fcopy. The daemon had a buffer size of two pages, which was much
larger than needed.

Now the expected length of bytes read by the
daemon changed slightly. For START_FILE_COPY it is still the size of
hv_start_fcopy.  But for WRITE_TO_FILE and the other operations it is as
large as the buffer that arrived via vmbus. In case of WRITE_TO_FILE
that is slightly larger than a struct hv_do_fcopy. Since the buffer in
the daemon was still larger everything was fine.

Currently, the daemon reads only what is actually needed.
The new buffer layout is as large as a struct hv_do_fcopy, for the
WRITE_TO_FILE operation. Since the kernel expects a slightly larger
size, hvt_op_read will return -EINVAL because the daemon will read
slightly less than expected. Address this by restoring the expected
buffer size in case of WRITE_TO_FILE.

Fixes: 'c7e490fc23eb ("Drivers: hv: fcopy: convert to hv_utils_transport")'
Fixes: '3f2baa8a7d2e ("Tools: hv: update buffer handling in hv_fcopy_daemon")'

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:33 +02:00
Nicolai Stange
2b91a52e15 driver core: platform: Don't read past the end of "driver_override" buffer
commit bf563b01c2895a4bfd1a29cc5abc67fe706ecffd upstream.

When printing the driver_override parameter when it is 4095 and 4094 bytes
long, the printing code would access invalid memory because we need count+1
bytes for printing.

Reject driver_override values of these lengths in driver_override_store().

This is in close analogy to commit 4efe874aac ("PCI: Don't read past the
end of sysfs "driver_override" buffer") from Sasha Levin.

Fixes: 3d713e0e38 ("driver core: platform: add device binding path 'driver_override'")
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:32 +02:00
Takashi Iwai
6d1bc9ee4c ALSA: usx2y: Suppress kernel warning at page allocation failures
commit 7682e399485fe19622b6fd82510b1f4551e48a25 upstream.

The usx2y driver allocates the stream read/write buffers in continuous
pages depending on the stream setup, and this may spew the kernel
warning messages with a stack trace like:
  WARNING: CPU: 1 PID: 1846 at mm/page_alloc.c:3883
  __alloc_pages_slowpath+0x1ef2/0x2d70
  Modules linked in:
  CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted
  ....

It may confuse user as if it were any serious error, although this is
no fatal error and the driver handles the error case gracefully.
Since the driver has already some sanity check of the given size (128
and 256 pages), it can't pass any crazy value.  So it's merely page
fragmentation.

This patch adds __GFP_NOWARN to each caller for suppressing such
kernel warnings.  The original issue was spotted by syzkaller.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:32 +02:00
Guneshwor Singh
8cff1556dd ALSA: compress: Remove unused variable
commit a931b9ce93841a5b66b709ba5a244276e345e63b upstream.

Commit 04c5d5a430 ("ALSA: compress: Embed struct device") removed
the statement that used 'str' but didn't remove the variable itself.
So remove it.

[Adding stable to Cc since pr_debug() may refer to the uninitialized
 buffer -- tiwai]

Fixes: 04c5d5a430 ("ALSA: compress: Embed struct device")
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:32 +02:00
Casey Schaufler
dd1f96a0a7 lsm: fix smack_inode_removexattr and xattr_getsecurity memleak
commit 57e7ba04d422c3d41c8426380303ec9b7533ded9 upstream.

security_inode_getsecurity() provides the text string value
of a security attribute. It does not provide a "secctx".
The code in xattr_getsecurity() that calls security_inode_getsecurity()
and then calls security_release_secctx() happened to work because
SElinux and Smack treat the attribute and the secctx the same way.
It fails for cap_inode_getsecurity(), because that module has no
secctx that ever needs releasing. It turns out that Smack is the
one that's doing things wrong by not allocating memory when instructed
to do so by the "alloc" parameter.

The fix is simple enough. Change the security_release_secctx() to
kfree() because it isn't a secctx being returned by
security_inode_getsecurity(). Change Smack to allocate the string when
told to do so.

Note: this also fixes memory leaks for LSMs which implement
inode_getsecurity but not release_secctx, such as capabilities.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:32 +02:00
Alan Stern
a44be3e548 USB: g_mass_storage: Fix deadlock when driver is unbound
commit 1fbbb78f25d1291274f320462bf6908906f538db upstream.

As a holdover from the old g_file_storage gadget, the g_mass_storage
legacy gadget driver attempts to unregister itself when its main
operating thread terminates (if it hasn't been unregistered already).
This is not strictly necessary; it was never more than an attempt to
have the gadget fail cleanly if something went wrong and the main
thread was killed.

However, now that the UDC core manages gadget drivers independently of
UDC drivers, this scheme doesn't work any more.  A simple test:

	modprobe dummy-hcd
	modprobe g-mass-storage file=...
	rmmod dummy-hcd

ends up in a deadlock with the following backtrace:

 sysrq: SysRq : Show Blocked State
   task                PC stack   pid father
 file-storage    D    0  1130      2 0x00000000
 Call Trace:
  __schedule+0x53e/0x58c
  schedule+0x6e/0x77
  schedule_preempt_disabled+0xd/0xf
  __mutex_lock.isra.1+0x129/0x224
  ? _raw_spin_unlock_irqrestore+0x12/0x14
  __mutex_lock_slowpath+0x12/0x14
  mutex_lock+0x28/0x2b
  usb_gadget_unregister_driver+0x29/0x9b [udc_core]
  usb_composite_unregister+0x10/0x12 [libcomposite]
  msg_cleanup+0x1d/0x20 [g_mass_storage]
  msg_thread_exits+0xd/0xdd7 [g_mass_storage]
  fsg_main_thread+0x1395/0x13d6 [usb_f_mass_storage]
  ? __schedule+0x573/0x58c
  kthread+0xd9/0xdb
  ? do_set_interface+0x25c/0x25c [usb_f_mass_storage]
  ? init_completion+0x1e/0x1e
  ret_from_fork+0x19/0x24
 rmmod           D    0  1155    683 0x00000000
 Call Trace:
  __schedule+0x53e/0x58c
  schedule+0x6e/0x77
  schedule_timeout+0x26/0xbc
  ? __schedule+0x573/0x58c
  do_wait_for_common+0xb3/0x128
  ? usleep_range+0x81/0x81
  ? wake_up_q+0x3f/0x3f
  wait_for_common+0x2e/0x45
  wait_for_completion+0x17/0x19
  fsg_common_put+0x34/0x81 [usb_f_mass_storage]
  fsg_free_inst+0x13/0x1e [usb_f_mass_storage]
  usb_put_function_instance+0x1a/0x25 [libcomposite]
  msg_unbind+0x2a/0x42 [g_mass_storage]
  __composite_unbind+0x4a/0x6f [libcomposite]
  composite_unbind+0x12/0x14 [libcomposite]
  usb_gadget_remove_driver+0x4f/0x77 [udc_core]
  usb_del_gadget_udc+0x52/0xcc [udc_core]
  dummy_udc_remove+0x27/0x2c [dummy_hcd]
  platform_drv_remove+0x1d/0x31
  device_release_driver_internal+0xe9/0x16d
  device_release_driver+0x11/0x13
  bus_remove_device+0xd2/0xe2
  device_del+0x19f/0x221
  ? selinux_capable+0x22/0x27
  platform_device_del+0x21/0x63
  platform_device_unregister+0x10/0x1a
  cleanup+0x20/0x817 [dummy_hcd]
  SyS_delete_module+0x10c/0x197
  ? ____fput+0xd/0xf
  ? task_work_run+0x55/0x62
  ? prepare_exit_to_usermode+0x65/0x75
  do_fast_syscall_32+0x86/0xc3
  entry_SYSENTER_32+0x4e/0x7c

What happens is that removing the dummy-hcd driver causes the UDC core
to unbind the gadget driver, which it does while holding the udc_lock
mutex.  The unbind routine in g_mass_storage tells the main thread to
exit and waits for it to terminate.

But as mentioned above, when the main thread exits it tries to
unregister the mass-storage function driver.  Via the composite
framework this ends up calling usb_gadget_unregister_driver(), which
tries to acquire the udc_lock mutex.  The result is deadlock.

The simplest way to fix the problem is not to be so clever: The main
thread doesn't have to unregister the function driver.  The side
effects won't be so terrible; if the gadget is still attached to a USB
host when the main thread is killed, it will appear to the host as
though the gadget's firmware has crashed -- a reasonably accurate
interpretation, and an all-too-common occurrence for USB mass-storage
devices.

In fact, the code to unregister the driver when the main thread exits
is specific to g-mass-storage; it is not used when f-mass-storage is
included as a function in a larger composite device.  Therefore the
entire mechanism responsible for this (the fsg_operations structure
with its ->thread_exits method, the fsg_common_set_ops() routine, and
the msg_thread_exits() callback routine) can all be eliminated.  Even
the msg_registered bitflag can be removed, because now the driver is
unregistered in only one place rather than in two places.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:32 +02:00
Li Jun
2efab2c3a3 usb: gadget: mass_storage: set msg_registered after msg registered
commit 8e55d30322c6a0ef746c256a1beda9c73ecb27a6 upstream.

If there is no UDC available, the msg register will fail and this
flag will not be set, but the driver is already added into pending
driver list, then the module removal modprobe -r can not remove
the driver from the pending list.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:32 +02:00
Dan Carpenter
b74a45450f USB: devio: Don't corrupt user memory
commit fa1ed74eb1c233be6131ec92df21ab46499a15b6 upstream.

The user buffer has "uurb->buffer_length" bytes.  If the kernel has more
information than that, we should truncate it instead of writing past
the end of the user's buffer.  I added a WARN_ONCE() to help the user
debug the issue.

Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:32 +02:00
Alan Stern
e84b4a0083 USB: dummy-hcd: Fix erroneous synchronization change
commit 7dbd8f4cabd96db5a50513de9d83a8105a5ffc81 upstream.

A recent change to the synchronization in dummy-hcd was incorrect.
The issue was that dummy_udc_stop() contained no locking and therefore
could race with various gadget driver callbacks, and the fix was to
add locking and issue the callbacks with the private spinlock held.

UDC drivers aren't supposed to do this.  Gadget driver callback
routines are allowed to invoke functions in the UDC driver, and these
functions will generally try to acquire the private spinlock.  This
would deadlock the driver.

The correct solution is to drop the spinlock before issuing callbacks,
and avoid races by emulating the synchronize_irq() call that all real
UDC drivers must perform in their ->udc_stop() routines after
disabling interrupts.  This involves adding a flag to dummy-hcd's
private structure to keep track of whether interrupts are supposed to
be enabled, and adding a counter to keep track of ongoing callbacks so
that dummy_udc_stop() can wait for them all to finish.

A real UDC driver won't receive disconnect, reset, suspend, resume, or
setup events once it has disabled interrupts.  dummy-hcd will receive
them but won't try to issue any gadget driver callbacks, which should
be just as good.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: f16443a034c7 ("USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks")
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:32 +02:00
Alan Stern
d1a0787b5a USB: dummy-hcd: fix infinite-loop resubmission bug
commit 0173a68bfb0ad1c72a6ee39cc485aa2c97540b98 upstream.

The dummy-hcd HCD/UDC emulator tries not to do too much work during
each timer interrupt.  But it doesn't try very hard; currently all
it does is limit the total amount of bulk data transferred.  Other
transfer types aren't limited, and URBs that transfer no data (because
of an error, perhaps) don't count toward the limit, even though on a
real USB bus they would consume at least a minimum overhead.

This means it's possible to get the driver stuck in an infinite loop,
for example, if the host class driver resubmits an URB every time it
completes (which is common for interrupt URBs).  Each time the URB is
resubmitted it gets added to the end of the pending-URBs list, and
dummy-hcd doesn't stop until that list is empty.  Andrey Konovalov was
able to trigger this failure mode using the syzkaller fuzzer.

This patch fixes the infinite-loop problem by restricting the URBs
handled during each timer interrupt to those that were already on the
pending list when the interrupt routine started.  Newly added URBs
won't be processed until the next timer interrupt.  The problem of
properly accounting for non-bulk bandwidth (as well as packet and
transaction overhead) is not addressed here.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:32 +02:00
Alan Stern
d25a65e03f USB: dummy-hcd: fix connection failures (wrong speed)
commit fe659bcc9b173bcfdd958ce2aec75e47651e74e1 upstream.

The dummy-hcd UDC driver is not careful about the way it handles
connection speeds.  It ignores the module parameter that is supposed
to govern the maximum connection speed and it doesn't set the HCD
flags properly for the case where it ends up running at full speed.

The result is that in many cases, gadget enumeration over dummy-hcd
fails because the bMaxPacketSize byte in the device descriptor is set
incorrectly.  For example, the default settings call for a high-speed
connection, but the maxpacket value for ep0 ends up being set for a
Super-Speed connection.

This patch fixes the problem by initializing the gadget's max_speed
and the HCD flags correctly.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:32 +02:00
Jim Dickerson
da35816812 usb: pci-quirks.c: Corrected timeout values used in handshake
commit 114ec3a6f9096d211a4aff4277793ba969a62c73 upstream.

Servers were emitting failed handoff messages but were not
waiting the full 1 second as designated in section 4.22.1 of
the eXtensible Host Controller Interface specifications. The
handshake was using wrong units so calls were made with milliseconds
not microseconds. Comments referenced 5 seconds not 1 second as
in specs.

The wrong units were also corrected in a second handshake call.

Signed-off-by: Jim Dickerson <jim.dickerson@hpe.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:31 +02:00
Takashi Iwai
46c7b1fa49 ALSA: usb-audio: Check out-of-bounds access by corrupted buffer descriptor
commit bfc81a8bc18e3c4ba0cbaa7666ff76be2f998991 upstream.

When a USB-audio device receives a maliciously adjusted or corrupted
buffer descriptor, the USB-audio driver may access an out-of-bounce
value at its parser.  This was detected by syzkaller, something like:

  BUG: KASAN: slab-out-of-bounds in usb_audio_probe+0x27b2/0x2ab0
  Read of size 1 at addr ffff88006b83a9e8 by task kworker/0:1/24
  CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 #224
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Workqueue: usb_hub_wq hub_event
  Call Trace:
   __dump_stack lib/dump_stack.c:16
   dump_stack+0x292/0x395 lib/dump_stack.c:52
   print_address_description+0x78/0x280 mm/kasan/report.c:252
   kasan_report_error mm/kasan/report.c:351
   kasan_report+0x22f/0x340 mm/kasan/report.c:409
   __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427
   snd_usb_create_streams sound/usb/card.c:248
   usb_audio_probe+0x27b2/0x2ab0 sound/usb/card.c:605
   usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
   really_probe drivers/base/dd.c:413
   driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
   __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
   bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
   __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
   device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
   bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
   device_add+0xd0b/0x1660 drivers/base/core.c:1835
   usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
   generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
   usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
   really_probe drivers/base/dd.c:413
   driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
   __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
   bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
   __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
   device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
   bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
   device_add+0xd0b/0x1660 drivers/base/core.c:1835
   usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
   hub_port_connect drivers/usb/core/hub.c:4903
   hub_port_connect_change drivers/usb/core/hub.c:5009
   port_event drivers/usb/core/hub.c:5115
   hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
   process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
   worker_thread+0x221/0x1850 kernel/workqueue.c:2253
   kthread+0x3a1/0x470 kernel/kthread.c:231
   ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

This patch adds the checks of out-of-bounce accesses at appropriate
places and bails out when it goes out of the given buffer.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:31 +02:00
Yoshihiro Shimoda
ccc6a47580 usb: renesas_usbhs: fix usbhsf_fifo_clear() for RX direction
commit 0a2ce62b61f2c76d0213edf4e37aaf54a8ddf295 upstream.

This patch fixes an issue that the usbhsf_fifo_clear() is possible
to cause 10 msec delay if the pipe is RX direction and empty because
the FRDY bit will never be set to 1 in such case.

Fixes: e8d548d549 ("usb: renesas_usbhs: fifo became independent from pipe.")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:31 +02:00
Yoshihiro Shimoda
a7131ed818 usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe
commit 6124607acc88fffeaadf3aacfeb3cc1304c87387 upstream.

This patch fixes an issue that the driver sets the BCLR bit of
{C,Dn}FIFOCTR register to 1 even when it's non-DCP pipe and
the FRDY bit of {C,Dn}FIFOCTR register is set to 1.

Fixes: e8d548d549 ("usb: renesas_usbhs: fifo became independent from pipe.")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:31 +02:00
Alan Stern
e85bd5be60 usb-storage: unusual_devs entry to fix write-access regression for Seagate external drives
commit 113f6eb6d50cfa5e2a1cdcf1678b12661fa272ab upstream.

Kris Lindgren reports that without the NO_WP_DETECT flag, his Seagate
external disk drive fails all write accesses.  This regresssion dates
back approximately to the start of the 4.x kernel releases.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Kris Lindgren <kris.lindgren@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:31 +02:00
Nicolas Ferre
86377bf330 usb: gadget: udc: atmel: set vbus irqflags explicitly
commit 6baeda120d90aa637b08f7604de104ab00ce9126 upstream.

The driver triggers actions on both edges of the vbus signal.

The former PIO controller was triggering IRQs on both falling and rising edges
by default. Newer PIO controller don't, so it's better to set it explicitly to
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING.

Without this patch we may trigger the connection with host but only on some
bouncing signal conditions and thus lose connecting events.

Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:31 +02:00
Alan Stern
f72264e79a USB: gadgetfs: fix copy_to_user while holding spinlock
commit 6e76c01e71551cb221c1f3deacb9dcd9a7346784 upstream.

The gadgetfs driver as a long-outstanding FIXME, regarding a call of
copy_to_user() made while holding a spinlock.  This patch fixes the
issue by dropping the spinlock and using the dev->udc_usage mechanism
introduced by another recent patch to guard against status changes
while the lock isn't held.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:31 +02:00
Alan Stern
d20fff0b09 USB: gadgetfs: Fix crash caused by inadequate synchronization
commit 520b72fc64debf8a86c3853b8e486aa5982188f0 upstream.

The gadgetfs driver (drivers/usb/gadget/legacy/inode.c) was written
before the UDC and composite frameworks were adopted; it is a legacy
driver.  As such, it expects that once bound to a UDC controller, it
will not be unbound until it unregisters itself.

However, the UDC framework does unbind function drivers while they are
still registered.  When this happens, it can cause the gadgetfs driver
to misbehave or crash.  For example, userspace can cause a crash by
opening the device file and doing an ioctl call before setting up a
configuration (found by Andrey Konovalov using the syzkaller fuzzer).

This patch adds checks and synchronization to prevent these bad
behaviors.  It adds a udc_usage counter that the driver increments at
times when it is using a gadget interface without holding the private
spinlock.  The unbind routine waits for this counter to go to 0 before
returning, thereby ensuring that the UDC is no longer in use.

The patch also adds a check in the dev_ioctl() routine to make sure
the driver is bound to a UDC before dereferencing the gadget pointer,
and it makes destroy_ep_files() synchronize with the endpoint I/O
routines, to prevent the user from accessing an endpoint data
structure after it has been removed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:31 +02:00
David Eccher
c2eb312f31 usb: gadget: inode.c: fix unbalanced spin_lock in ep0_write
commit b7bd98b7db9fc8fe19da1a5ff0215311c6b95e46 upstream.

Fix bad unlock balance: ep0_write enter with the locks locked from
inode.c:1769, hence it must exit with spinlock held to avoid double
unlock in dev_config.

Signed-off-by: David Eccher <d.eccher@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12 11:27:30 +02:00
Greg Kroah-Hartman
c030c36a88 Linux 4.4.91 2017-10-08 10:24:24 +02:00
Arnd Bergmann
2536c20e82 ttpci: address stringop overflow warning
commit 69d3973af1acd4c0989ec8218c05f12d303cd7cf upstream.

gcc-7.0.1 warns about old code in ttpci:

In file included from drivers/media/pci/ttpci/av7110.c:63:0:
In function 'irdebi.isra.2',
    inlined from 'start_debi_dma' at drivers/media/pci/ttpci/av7110.c:376:3,
    inlined from 'gpioirq' at drivers/media/pci/ttpci/av7110.c:659:3:
drivers/media/pci/ttpci/av7110_hw.h:406:3: warning: 'memcpy': specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=]
   memcpy(av7110->debi_virt, (char *) &res, count);
In function 'irdebi.isra.2',
    inlined from 'start_debi_dma' at drivers/media/pci/ttpci/av7110.c:376:3,
    inlined from 'gpioirq' at drivers/media/pci/ttpci/av7110.c:668:3:
drivers/media/pci/ttpci/av7110_hw.h:406:3: warning: 'memcpy': specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=]
   memcpy(av7110->debi_virt, (char *) &res, count);

Apparently, 'count' can be negative here, which will then get turned
into a giant size argument for memcpy. Changing the sizes to 'unsigned
int' instead seems safe as we already check for maximum sizes, and it
also simplifies the code a bit.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:20 +02:00
Arnd Bergmann
2b2bfb537b ALSA: au88x0: avoid theoretical uninitialized access
commit 13f99ebdd602ebdafb909e15ec6ffb1e34690167 upstream.

The latest gcc-7.0.1 snapshot points out that we if nr_ch is zero, we never
initialize some variables:

sound/pci/au88x0/au88x0_core.c: In function 'vortex_adb_allocroute':
sound/pci/au88x0/au88x0_core.c:2304:68: error: 'mix[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
sound/pci/au88x0/au88x0_core.c:2305:58: error: 'src[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized]

I assume this can never happen in practice, but adding a check here doesn't
hurt either and avoids the warning. The code has been unchanged since
the start of git history.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:20 +02:00
Arnd Bergmann
d32ee70260 ARM: remove duplicate 'const' annotations'
commit 0527873b29b077fc8e656acd63e1866b429fef55 upstream.

gcc-7 warns about some declarations that are more 'const' than necessary:

arch/arm/mach-at91/pm.c:338:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
 static const struct of_device_id const ramc_ids[] __initconst = {
arch/arm/mach-bcm/bcm_kona_smc.c:36:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
 static const struct of_device_id const bcm_kona_smc_ids[] __initconst = {
arch/arm/mach-spear/time.c:207:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
 static const struct of_device_id const timer_of_match[] __initconst = {
arch/arm/mach-omap2/prm_common.c:714:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
 static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = {
arch/arm/mach-omap2/vc.c:562:35: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
 static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = {

The ones in arch/arm were apparently all introduced accidentally by one
commit that correctly marked a lot of variables as __initconst.

Fixes: 19c233b79d ("ARM: appropriate __init annotation for const data")
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:20 +02:00
Arnd Bergmann
7cad91f22d IB/qib: fix false-postive maybe-uninitialized warning
commit f6aafac184a3e46e919769dd4faa8bf0dc436534 upstream.

aarch64-linux-gcc-7 complains about code it doesn't fully understand:

drivers/infiniband/hw/qib/qib_iba7322.c: In function 'qib_7322_txchk_change':
include/asm-generic/bitops/non-atomic.h:105:35: error: 'shadow' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The code is right, and despite trying hard, I could not come up with a version
that I liked better than just adding a fake initialization here to shut up the
warning.

Fixes: f931551baf ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:20 +02:00
Jisheng Zhang
13af23e018 drivers: firmware: psci: drop duplicate const from psci_of_match
commit 1d2d8de44a6c20af262b4c3d3b93ef7ec3c5488e upstream.

This is to fix below sparse warning:
drivers/firmware/psci.c:mmm:nn: warning: duplicate const

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:20 +02:00
Gwendal Grignou
f6c8c71cc9 libata: transport: Remove circular dependency at free time
[ Upstream commit d85fc67dd11e9a32966140677d4d6429ca540b25 ]

Without this patch, failed probe would not free resources like irq.

ata port tdev object currently hold a reference to the ata port
object.  Therefore the ata port object release function will not get
called until the ata_tport_release is called. But that would never
happen, releasing the last reference of ata port dev is done by
scsi_host_release, which is called by ata_host_release when the ata
port object is released.

The ata device objects actually do not need to explicitly hold a
reference to their real counterpart, given the transport objects are
the children of these objects and device_add() is call for each child.
We know the parent will not be deleted until we call the child's
device_del().

Reported-by: Matthew Whitehead <tedheadster@gmail.com>
Tested-by: Matthew Whitehead <tedheadster@gmail.com>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:20 +02:00
Darrick J. Wong
0185496a11 xfs: remove kmem_zalloc_greedy
[ Upstream commit 08b005f1333154ae5b404ca28766e0ffb9f1c150 ]

The sole remaining caller of kmem_zalloc_greedy is bulkstat, which uses
it to grab 1-4 pages for staging of inobt records.  The infinite loop in
the greedy allocation function is causing hangs[1] in generic/269, so
just get rid of the greedy allocator in favor of kmem_zalloc_large.
This makes bulkstat somewhat more likely to ENOMEM if there's really no
pages to spare, but eliminates a source of hangs.

[1] http://lkml.kernel.org/r/20170301044634.rgidgdqqiiwsmfpj%40XZHOUW.usersys.redhat.com

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:20 +02:00
Heiner Kallweit
088b9a41b6 i2c: meson: fix wrong variable usage in meson_i2c_put_data
[ Upstream commit 3b0277f198ac928f323c42e180680d2f79aa980d ]

Most likely a copy & paste error.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fixes: 30021e3707 ("i2c: add support for Amlogic Meson I2C controller")
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:20 +02:00
Shaohua Li
cb07496eab md/raid10: submit bio directly to replacement disk
[ Upstream commit 6d399783e9d4e9bd44931501948059d24ad96ff8 ]

Commit 57c67df(md/raid10: submit IO from originating thread instead of
md thread) submits bio directly for normal disks but not for replacement
disks. There is no point we shouldn't do this for replacement disks.

Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:20 +02:00
Zhu Yanjun
13099ee9c7 rds: ib: add error handle
[ Upstream commit 3b12f73a5c2977153f28a224392fd4729b50d1dc ]

In the function rds_ib_setup_qp, the error handle is missing. When some
error occurs, it is possible that memory leak occurs. As such, error
handle is added.

Cc: Joe Jin <joe.jin@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Guanglei Li <guanglei.li@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:19 +02:00
Oleksandr Tyshchenko
9bcd5ceef9 iommu/io-pgtable-arm: Check for leaf entry before dereferencing it
[ Upstream commit ed46e66cc1b3d684042f92dfa2ab15ee917b4cac ]

Do a check for already installed leaf entry at the current level before
dereferencing it in order to avoid walking the page table down with
wrong pointer to the next level.

Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
CC: Will Deacon <will.deacon@arm.com>
CC: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:19 +02:00
Arvind Yadav
cadfa3a688 parisc: perf: Fix potential NULL pointer dereference
[ Upstream commit 74e3f6e63da6c8e8246fba1689e040bc926b4a1a ]

Fix potential NULL pointer dereference and clean up
coding style errors (code indent, trailing whitespaces).

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:19 +02:00
Liping Zhang
4203f2a738 netfilter: nfnl_cthelper: fix incorrect helper->expect_class_max
[ Upstream commit ae5c682113f9f94cc5e76f92cf041ee624c173ee ]

The helper->expect_class_max must be set to the total number of
expect_policy minus 1, since we will use the statement "if (class >
helper->expect_class_max)" to validate the CTA_EXPECT_CLASS attr in
ctnetlink_alloc_expect.

So for compatibility, set the helper->expect_class_max to the
NFCTH_POLICY_SET_NUM attr's value minus 1.

Also: it's invalid when the NFCTH_POLICY_SET_NUM attr's value is zero.
1. this will result "expect_policy = kzalloc(0, GFP_KERNEL);";
2. we cannot set the helper->expect_class_max to a proper value.

So if nla_get_be32(tb[NFCTH_POLICY_SET_NUM]) is zero, report -EINVAL to
the userspace.

Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:19 +02:00
Thibault Saunier
fa029020bd exynos-gsc: Do not swap cb/cr for semi planar formats
[ Upstream commit d7f3e33df4fbdc9855fb151f4a328ec46447e3ba ]

In the case of semi planar formats cb and cr are in the same plane
in memory, meaning that will be set to 'cb' whatever the format is,
and whatever the (packed) order of those components are.

Suggested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Thibault Saunier <thibault.saunier@osg.samsung.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:19 +02:00
Matt Redfearn
8bd7216d33 MIPS: IRQ Stack: Unwind IRQ stack onto task stack
[ Upstream commit db8466c581cca1a08b505f1319c3ecd246f16fa8 ]

When the separate IRQ stack was introduced, stack unwinding only
proceeded as far as the top of the IRQ stack, leading to kernel
backtraces being less useful, lacking the trace of what was interrupted.

Fix this by providing a means for the kernel to unwind the IRQ stack
onto the interrupted task stack. The processor state is saved to the
kernel task stack on interrupt. The IRQ_STACK_START macro reserves an
unsigned long at the top of the IRQ stack where the interrupted task
stack pointer can be saved. After the active stack is switched to the
IRQ stack, save the interrupted tasks stack pointer to the reserved
location.

Fix the stack unwinding code to look for the frame being the top of the
IRQ stack and if so get the next frame from the saved location. The
existing test does not work with the separate stack since the ra is no
longer pointed at ret_from_{irq,exception}.

The test to stop unwinding the stack 32 bytes from the top of a stack
must be modified to allow unwinding to continue up to the location of
the saved task stack pointer when on the IRQ stack. The low / high marks
of the stack are set depending on whether the sp is on an irq stack or
not.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15788/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:19 +02:00
Liping Zhang
f7f46b3ba2 netfilter: invoke synchronize_rcu after set the _hook_ to NULL
[ Upstream commit 3b7dabf029478bb80507a6c4500ca94132a2bc0b ]

Otherwise, another CPU may access the invalid pointer. For example:
    CPU0                CPU1
     -              rcu_read_lock();
     -              pfunc = _hook_;
  _hook_ = NULL;          -
  mod unload              -
     -                 pfunc(); // invalid, panic
     -             rcu_read_unlock();

So we must call synchronize_rcu() to wait the rcu reader to finish.

Also note, in nf_nat_snmp_basic_fini, synchronize_rcu() will be invoked
by later nf_conntrack_helper_unregister, but I'm inclined to add a
explicit synchronize_rcu after set the nf_nat_snmp_hook to NULL. Depend
on such obscure assumptions is not a good idea.

Last, in nfnetlink_cttimeout, we use kfree_rcu to free the time object,
so in cttimeout_exit, invoking rcu_barrier() is not necessary at all,
remove it too.

Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:19 +02:00
Ido Schimmel
e29066778b bridge: netlink: register netdevice before executing changelink
[ Upstream commit 5b8d5429daa05bebef6ffd3297df3b502cc6f184 ]

Peter reported a kernel oops when executing the following command:

$ ip link add name test type bridge vlan_default_pvid 1

[13634.939408] BUG: unable to handle kernel NULL pointer dereference at
0000000000000190
[13634.939436] IP: __vlan_add+0x73/0x5f0
[...]
[13634.939783] Call Trace:
[13634.939791]  ? pcpu_next_unpop+0x3b/0x50
[13634.939801]  ? pcpu_alloc+0x3d2/0x680
[13634.939810]  ? br_vlan_add+0x135/0x1b0
[13634.939820]  ? __br_vlan_set_default_pvid.part.28+0x204/0x2b0
[13634.939834]  ? br_changelink+0x120/0x4e0
[13634.939844]  ? br_dev_newlink+0x50/0x70
[13634.939854]  ? rtnl_newlink+0x5f5/0x8a0
[13634.939864]  ? rtnl_newlink+0x176/0x8a0
[13634.939874]  ? mem_cgroup_commit_charge+0x7c/0x4e0
[13634.939886]  ? rtnetlink_rcv_msg+0xe1/0x220
[13634.939896]  ? lookup_fast+0x52/0x370
[13634.939905]  ? rtnl_newlink+0x8a0/0x8a0
[13634.939915]  ? netlink_rcv_skb+0xa1/0xc0
[13634.939925]  ? rtnetlink_rcv+0x24/0x30
[13634.939934]  ? netlink_unicast+0x177/0x220
[13634.939944]  ? netlink_sendmsg+0x2fe/0x3b0
[13634.939954]  ? _copy_from_user+0x39/0x40
[13634.939964]  ? sock_sendmsg+0x30/0x40
[13634.940159]  ? ___sys_sendmsg+0x29d/0x2b0
[13634.940326]  ? __alloc_pages_nodemask+0xdf/0x230
[13634.940478]  ? mem_cgroup_commit_charge+0x7c/0x4e0
[13634.940592]  ? mem_cgroup_try_charge+0x76/0x1a0
[13634.940701]  ? __handle_mm_fault+0xdb9/0x10b0
[13634.940809]  ? __sys_sendmsg+0x51/0x90
[13634.940917]  ? entry_SYSCALL_64_fastpath+0x1e/0xad

The problem is that the bridge's VLAN group is created after setting the
default PVID, when registering the netdevice and executing its
ndo_init().

Fix this by changing the order of both operations, so that
br_changelink() is only processed after the netdevice is registered,
when the VLAN group is already initialized.

Fixes: b6677449dff6 ("bridge: netlink: call br_changelink() during br_dev_newlink()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Peter V. Saveliev <peter@svinota.eu>
Tested-by: Peter V. Saveliev <peter@svinota.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:19 +02:00
Heiner Kallweit
1b760fdad9 mmc: sdio: fix alignment issue in struct sdio_func
[ Upstream commit 5ef1ecf060f28ecef313b5723f1fd39bf5a35f56 ]

Certain 64-bit systems (e.g. Amlogic Meson GX) require buffers to be
used for DMA to be 8-byte-aligned. struct sdio_func has an embedded
small DMA buffer not meeting this requirement.
When testing switching to descriptor chain mode in meson-gx driver
SDIO is broken therefore. Fix this by allocating the small DMA buffer
separately as kmalloc ensures that the returned memory area is
properly aligned for every basic data type.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Helmut Klein <hgkr.klein@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:19 +02:00
Roman Spychała
e1e99dc319 usb: plusb: Add support for PL-27A1
[ Upstream commit 6f2aee0c0de65013333bbc26fe50c9c7b09a37f7 ]

This patch adds support for the PL-27A1 by adding the appropriate
USB ID's. This chip is used in the goobay Active USB 3.0 Data Link
and Unitek Y-3501 cables.

Signed-off-by: Roman Spychała <roed@onet.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:19 +02:00
Pan Bian
4212115da6 team: fix memory leaks
[ Upstream commit 72ec0bc64b9a5d8e0efcb717abfc757746b101b7 ]

In functions team_nl_send_port_list_get() and
team_nl_send_options_get(), pointer skb keeps the return value of
nlmsg_new(). When the call to genlmsg_put() fails, the memory is not
freed(). This will result in memory leak bugs.

Fixes: 9b00cf2d10 ("team: implement multipart netlink messages for options transfers")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:18 +02:00
Alexander Potapenko
fa63895f47 net/packet: check length in getsockopt() called with PACKET_HDRLEN
[ Upstream commit fd2c83b35752f0a8236b976978ad4658df14a59f ]

In the case getsockopt() is called with PACKET_HDRLEN and optlen < 4
|val| remains uninitialized and the syscall may behave differently
depending on its value, and even copy garbage to userspace on certain
architectures. To fix this we now return -EINVAL if optlen is too small.

This bug has been detected with KMSAN.

Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:18 +02:00
Myungho Jung
b9ff317b5c net: core: Prevent from dereferencing null pointer when releasing SKB
[ Upstream commit 9899886d5e8ec5b343b1efe44f185a0e68dc6454 ]

Added NULL check to make __dev_kfree_skb_irq consistent with kfree
family of functions.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=195289

Signed-off-by: Myungho Jung <mhjungk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:18 +02:00
Arnd Bergmann
4e6cdc0a7d MIPS: Lantiq: Fix another request_mem_region() return code check
[ Upstream commit 98ea51cb0c8ce009d9da1fd7b48f0ff1d7a9bbb0 ]

Hauke already fixed a couple of them, but one instance remains
that checks for a negative integer when it should check
for a NULL pointer:

arch/mips/lantiq/xway/sysctrl.c: In function 'ltq_soc_init':
arch/mips/lantiq/xway/sysctrl.c:473:19: error: ordered comparison of pointer with integer zero [-Werror=extra]

Fixes: 6e80785267 ("MIPS: Lantiq: Fix check for return value of request_mem_region()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15043/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:18 +02:00
Linus Walleij
c5710390cc ASoC: dapm: fix some pointer error handling
[ Upstream commit 639467c8f26d834c934215e8b59129ce442475fe ]

commit 66feeec9322132689d42723df2537d60f96f8e44
"RFC: ASoC: dapm: handle probe deferrals"
forgot a to update some two sites where the call
was used. The static codechecks quickly found them.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 66feeec93221 ("RFC: ASoC: dapm: handle probe deferrals")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:18 +02:00
Peter Chen
7b8c9e6e0f usb: chipidea: vbus event may exist before starting gadget
[ Upstream commit c3b674a04b8ab62a1d35e86714d466af0a0ecc18 ]

At some situations, the vbus may already be there before starting
gadget. So we need to check vbus event after switching to gadget in
order to handle missing vbus event. The typical use cases are plugging
vbus cable before driver load or the vbus has already been there
after stopping host but before starting gadget.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Tested-by: Stephen Boyd <stephen.boyd@linaro.org>
Reported-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:18 +02:00
Richard Guy Briggs
093fe104c5 audit: log 32-bit socketcalls
[ Upstream commit 62bc306e2083436675e33b5bdeb6a77907d35971 ]

32-bit socketcalls were not being logged by audit on x86_64 systems.
Log them.  This is basically a duplicate of the call from
net/socket.c:sys_socketcall(), but it addresses the impedance mismatch
between 32-bit userspace process and 64-bit kernel audit.

See: https://github.com/linux-audit/audit-kernel/issues/14

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:18 +02:00
Linus Walleij
af37494560 ASoC: dapm: handle probe deferrals
[ Upstream commit 37e1df8c95e2c8a57c77eafc097648f6e40a60ff ]

This starts to handle probe deferrals on regulators and clocks
on the ASoC DAPM.

I came to this patch after audio stopped working on Ux500 ages
ago and I finally looked into it to see what is wrong. I had
messages like this in the console since a while back:

ab8500-codec.0: ASoC: Failed to request audioclk: -517
ab8500-codec.0: ASoC: Failed to create DAPM control audioclk
ab8500-codec.0: Failed to create new controls -12
snd-soc-mop500.0: ASoC: failed to instantiate card -12
snd-soc-mop500.0: Error: snd_soc_register_card failed (-12)!
snd-soc-mop500: probe of snd-soc-mop500.0 failed with error -12

Apparently because the widget table for the codec looks like
this (sound/soc/codecs/ab8500-codec.c):

static const struct snd_soc_dapm_widget ab8500_dapm_widgets[] = {

        /* Clocks */
        SND_SOC_DAPM_CLOCK_SUPPLY("audioclk"),

        /* Regulators */
        SND_SOC_DAPM_REGULATOR_SUPPLY("V-AUD", 0, 0),
        SND_SOC_DAPM_REGULATOR_SUPPLY("V-AMIC1", 0, 0),
        SND_SOC_DAPM_REGULATOR_SUPPLY("V-AMIC2", 0, 0),
        SND_SOC_DAPM_REGULATOR_SUPPLY("V-DMIC", 0, 0),

So when we call snd_soc_register_codec() and any of these widgets
get a deferred probe we do not get an -EPROBE_DEFER (-517) back as
we should and instead we just fail. Apparently the code assumes
that clocks and regulators must be available at this point and
not defer.

After this patch it rather looks like this:

ab8500-codec.0: Failed to create new controls -517
snd-soc-mop500.0: ASoC: failed to instantiate card -517
snd-soc-mop500.0: Error: snd_soc_register_card failed (-517)!
(...)
abx500-clk.0: registered clocks for ab850x
snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok
snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok

I'm pretty happy about the patch as it it, but I'm a bit
uncertain on how to proceed: there are a lot of users of the
external functions snd_soc_dapm_new_control() (111 sites)
and that will now return an occassional error pointer, which
is not handled in the calling sites.

I want an indication from the maintainers whether I should just
go in and augment all these call sites, or if deferred probe
is frowned upon when it leads to this much overhead.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08 10:14:18 +02:00