Place file offset validity checks under mutex for
synaptics_dsx_rmi_dev.c touch driver.
Git-repo: https://android.googlesource.com/kernel/msm
Git-commit: e1fb1600fc222337989e3084d68df929882deae5
Change-Id: I2c32babbccb483547204cb2843973abf97e988a5
Signed-off-by: Andrew Chant <achant@google.com>
[srkupp@codeaurora.org: This change is a fix for buggy
code pointed by sil after merging the above commit.}
Signed-off-by: Srinivasa Rao Kuppala <srkupp@codeaurora.org>
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Currently MIDI function supports only upto HighSpeed
enumeration. Add descriptors for SuperSpeed mode
and bind them to enable SuperSpeed enumeration of
USB MIDI function.
Change-Id: I0451dabf91e88503ab588dadbfbe6a2b76e2351b
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Align the size of the IOVA that is being passed
in the arm_iommu_create_mapping() to 128MB.
Change-Id: Ia554c2157d6c46b2f3848f993a7e61ff7f029547
Acked-by: Chenna Kesava Raju <chennak@qti.qualcomm.com>
Signed-off-by: Tharun Kumar Merugu <mtharu@codeaurora.org>
The WLAN host driver is allocating the memory from pre-alloc pool
during insmod/wlan start up before WLAN driver register and
release the pre-alloc memory after driver unregister/remove.
The Pre-alloc memory leak check and reset in Icnss platform driver
on probe failure and after remove will leads to invalid memory
leak stat and dangling pointer for wlan host driver allocated memory
from the pre-alloc memory pool.
To fix the above issue remove the pre-allaoc memory leak
check and pre-alloc memory pool reset from the icnss platform
driver and export symbol for the pre-alloc memory leak check
and pre-alloc memory pool reset.
CRs-Fixed: 2039483
Change-Id: Id9f01c9d2b5184fbb58935eaf11fd21b50b47908
Signed-off-by: Hardik Kantilal Patel <hkpatel@codeaurora.org>
Reset and power off timing is different. Hence need a
separate callback function.
Change-Id: I9714a4449b1fbeab84017da4be17f5ca2cb6cab6
Signed-off-by: Arun KS <arunks@codeaurora.org>
This change defines upto 3 instances of external mdm9x45 modems in
device-tree which would need to be controlled by esoc (external esoc)
driver. The device-tree nodes allows the configuration of the external
modems (like the GPIO pins used to communicate status of modem) to be
specified.
Change-Id: I7e609f7549a02cd3322db76b00dc30137ed68953
Signed-off-by: Arun KS <arunks@codeaurora.org>
In certain scenarios, modem shutdown requests are handled in
userspace. Enhance request engine of esoc driver to send
shutdown requests to userspace.
Also, during a shutdown, avoid setting status to 0, if line is
not a power source. There can be multiple mdms monitoring status
line. This can otherwise be misinterpreted as an unexpected reset
by other mdms.
Change-Id: I9c20a86e76f892cc61dbfb814202b26e5cce3e96
Signed-off-by: Arun KS <arunks@codeaurora.org>
Signed-off-by: Srivatsa Vaddagiri <vatsa@codeaurora.org>
During an unexpected reset or error fatal, update the
crash status to SSR. This is important for the drivers
listening at SSR related kernel notifier calls, where
crash status is also passed as a data payload.
Change-Id: Ide0634d0139a84b5988fa87e709877f3028029ef
Signed-off-by: Arun KS <arunks@codeaurora.org>
SSR failures are considered fatal and results in system panic.
In certain scenarios system can continue to work even with a
failed subsystem.
Add an option in subsystem descriptor to relax on ssr failures.
Change-Id: I86dcaa615d6443937077880d9a91070d9c22ea1f
Signed-off-by: Arun KS <arunks@codeaurora.org>
[satyap@codeaurora.org: trivial merge conflict resolution]
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
Add clk_state event to record the state of all the clocks
into ftrace. The clock event could be triggered by using
the "trace_clocks" debugfs entry and it would dump the
current state of all clocks in ftrace logs.
Change-Id: I28b6574fe1d96472833a93e7b251dbba6c6eae49
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Add REAL_TYPE power_supply property to record the real time charger
type.
Change-Id: I5fb2e3e3e782bcac0f8dd6071a830bcf370ebbd4
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Currently the code simply enforces Qnovo's current and voltage bypassing
other voters. This is not desired. Make Qnovo vote via the FCC and FV
votables. The only other vote it should skip is the votes coming from
battery profile.
Change-Id: I5c794ea209a8ea2a61d834e2f619d7ccfd02fed9
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Fix the cleanup path of probe failure to make sure
all the resources get released in proper order.
Change-Id: Ie482c9856569ea708a8fa186049ab778a8e5be12
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
The code flow between battery.c and smblib.c could end up with
stale references in smblib. This is when if pl_init fails for
some reason after creating the votables, while smblib obtains
references to them, those references become invalid.
Fix this by calling pl_init early in smb2 driver's probe such that if
it fails smb2 driver exits early.
Also change the name of pl_(de)init() functions to more appropriate
name - qcom_batt_(de)init().
Change-Id: I58f79d26e6cc8524e792a23185ff6fc8cfdffa75
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Added a new iommu test device which is dma-coherent. This
test device will be used for validating buffer coherency.
Change-Id: Iea1c57fd2cd5d71de2f26932d21cae8102fb918e
Signed-off-by: Sudarshan Rajagopalan <sudaraja@codeaurora.org>
Before asserting PERST, PCIe bus driver should switch GPIO to
sleep state. This will prevent host from missing any events after
the link is off.
Change-Id: Ie57d339da02dde6cbb3c41d2be52ee0602227193
Signed-off-by: Tony Truong <truong@codeaurora.org>
smb1355 doesn't have any facility to suspend input. One has to
disable charging using the chg_en command bit.
So, when parallel charging needs to be disabled, configure
the charger to ignore the chg_en input pin and instead use the
command register. The command register is always programmed to
disable charging.
When parallel charging needs to be enabled, configure it to
follow the chg_en input pin.
This will work for both smb1355 and smb1381 parallel chargers.
Change-Id: I50294f40927641c2e0a7c7e4e7d263592086d3a9
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
