A NULL pointer check is added to prevent a NULL pointer
exception. A data type is fixed to prevent a type conversion
before an error check.
Change-Id: If4f6f70c8770ad48432e466e1b6a7e9bf4b62258
Signed-off-by: Anant Goel <anantg@codeaurora.org>
Add a property to determine if a target support secure context
for use cases like CPZ.
This property can be used by userspace application to create
a secure context if its supported on the target.
Change-Id: I1ccc824378fb8fbd2cfbc7b811c6c3fdcd17803e
Signed-off-by: Sunil Khatri <sunilkh@codeaurora.org>
Add a property to determine the hardware alignment
constraint on secure buffers. XPUv2 and below
have a minimum requirement of 1 MBytes alignment
and hence driver should allocate memory with minimum
alignment on size.
Change-Id: Ie3ca5da489bc94ae57ddc6695e402463fd7a88c2
Signed-off-by: Sunil Khatri <sunilkh@codeaurora.org>
For qrd devices, remove HOME gpio key to fix driver probe issue.
Change-Id: I46ba4ef05c795fced67f2db59a3f5ce183bdeba8
Signed-off-by: Fei Mao <feim1@codeaurora.org>
Make HAB clients have chance to import the
same export id to fd and uva before unimport
happens.
Change-Id: I59fdc701dcdc086e58865fa216b10f9fe6a45e29
Signed-off-by: Yajun Li <yajunl@codeaurora.org>
When getting a vchan after receiving a message, it has probability that
this vchan is closed concurrently. So when refcount is increased by
kref_get_unless_zero, but flag vchan->otherend_closed or vchan->closed
is true at this time, it will return vchan as NULL, and the hab_vchan_put
will not be called in hab_msg_rev. So adjust the timing here can avoid the
leak risk.
Change-Id: If78c1c41bc4fd05b3288c0324bb9e0aed8493c5f
Signed-off-by: Yao Jiang <yaojia@codeaurora.org>
If refcount was 0 before increment, it maybe has a race condition that
this kref is freeing by some other thread right now. In this case we should
not increments refcount, so replace with kref_get_unless_zero.
Change-Id: Ic15eaefc111770a966094d05b19eca2a04d52fc2
Signed-off-by: Yao Jiang <yaojia@codeaurora.org>
Avoid the release of memory for dynamic fps PLL codes. The memory
is part of the continuous splash memory region and will be freed
eventually as part of the splash screen memory cleanup routine.
Change-Id: I67afb46057770298668ae5790637e8b4b08fd030
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
Add new freq map for memlat node for sdm455.
Change-Id: I536b7f3e41610ca78d5cfae08ecbfc1e82b8fe5b
Signed-off-by: Biao long <blong@codeaurora.org>
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
Protect ipa default routing table from
addition, deletion and modification once after
default rule added by ipa-driver.
Change-Id: I045d9c29fed23edf796d826e440b81124e1f666a
Signed-off-by: Mohammed Javid <mjavid@codeaurora.org>
Checksum for the HDR infoframe is set to zero by default
as this is not a mandatory field as per the HDMI spec.
However certain HDMI sinks still expect a non-zero
checksum. Otherwise they disregard the infoframe
and the sink does not enter HDR mode despite other fields
of the infoframe being valid.
Add a valid checksum to the HDR infoframe to improve
interoperability of our HDR solution for HDMI.
Change-Id: Ie826e5e637fc1f053203bdcf6a829d0246a9ed67
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
With a certain probability soft lockup when do hab vchan free schedule.
one vchan do the local hab close while another vchan in the same context
through softirq also try to acquire write lock in the free schedule at the
same time, it will cause watchdog bite. Disable local softirq could avoid
race condition handling between tasklet and process context.
Change-Id: I4ee9b980dab7ecb1986af1d61f70157fc30d1048
Signed-off-by: Yao Jiang <yaojia@codeaurora.org>
Add genoa pcie specific qmi and power up/down handling.
Change-Id: I08e640f775de5436071b457225a8b61f13574d01
CRs-fixed: 2272303
Signed-off-by: Jayachandran Sreekumaran <jsreekum@codeaurora.org>
Add an additional HDR state transition to cover the HDR
teardown sequence case.
This will avoid the HDR infoframe to be programmed repeatedly
if there is no change in its contents.
Change-Id: Ic2f077f0c2ff01e19db5a59b218c4d824e039773
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Navid Bahrani <nbahrani@codeaurora.org>
Currently it is possible for an ION client to allocate non-HLOS memory
(ie memory which isn't assigned to the HLOS vmid), map this memory, and
then attempt to access this memory from the CPU.
Attempting to access non-HLOS memory from the CPU will cause a
stage-2 fault.
Fix ION so that non-HLOS memory cannot be mapped by the CPU.
Change-Id: Ifb51de2eabc076cddc744c13f01ef97b4a7c6874
Signed-off-by: Liam Mark <lmark@codeaurora.org>
UFS_RESET is a single purpose output only pin which can be used to
send reset to connected UFS device. This change adds UFS_RESET
pin data.
Change-Id: I539ae2bef003bccf8aa9c23fb5dde0b263844629
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
lock_page() must operate on the whole compound page. It doesn't make
much sense to lock part of compound page. Change code to use head
page's PG_locked, if tail page is passed.
This patch also gets rid of custom helper functions --
__set_page_locked() and __clear_page_locked(). They are replaced with
helpers generated by __SETPAGEFLAG/__CLEARPAGEFLAG. Tail pages to these
helper would trigger VM_BUG_ON().
SLUB uses PG_locked as a bit spin locked. IIUC, tail pages should never
appear there. VM_BUG_ON() is added to make sure that this assumption is
correct.
[akpm@linux-foundation.org: fix fs/cifs/file.c]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: Ifeeb98c789880ff34b286383568db60e08672205
Git-Commit: 48c935ad88f5be20eb5445a77c171351b1eb5111
Git-Repo: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
