This patch adds support to use audio_source
gadget function through DECLARE_USB_FUNCTION_INIT
interface.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Change-Id: I1fc6c9ea07105ae4eb785eebd3bb925bfdd8bc6b
Added create_function_device to create child
function devices for USB gadget functions.
Android UsbDeviceManager relies on communicating
to the devices created by the gadget functions
to implement functions such as audio_source.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I0df9ad86ac32d8cdacdea164e9fed49891b45fc2
While disabling ConfigFS Android gadget, android_disconnect() calls
kill_all_hid_devices(), if CONFIG_USB_CONFIGFS_F_ACC is enabled, to free
the registered HIDs without checking whether the USB accessory device
really exist or not. If USB accessory device doesn't exist then we run into
following kernel panic:
----8<----
[ 136.724761] Unable to handle kernel NULL pointer dereference at virtual address 00000064
[ 136.724809] pgd = c0204000
[ 136.731924] [00000064] *pgd=00000000
[ 136.737830] Internal error: Oops: 5 [#1] SMP ARM
[ 136.738108] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc4-00400-gf75300e-dirty #76
[ 136.742788] task: c0fb19d8 ti: c0fa4000 task.ti: c0fa4000
[ 136.750890] PC is at _raw_spin_lock_irqsave+0x24/0x60
[ 136.756246] LR is at kill_all_hid_devices+0x24/0x114
---->8----
This patch adds a test to check if USB Accessory device exists before freeing HIDs.
Change-Id: Ie229feaf0de3f4f7a151fcaa9a994e34e15ff73b
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
commit f1a1823ff2
usb: gadget: u_ether: convert into module
changes qlen function definition. and this has to be fixed
accordingly in current u_ether driver.
This patch fixes following compile error in u_ether caused by commit.
drivers/usb/gadget/u_ether.c: In function 'rx_fill':
drivers/usb/gadget/u_ether.c:416:3: error: too few arguments to function 'qlen'
if (++req_cnt > qlen(dev->gadget))
^
drivers/usb/gadget/u_ether.c: In function 'eth_start_xmit':
drivers/usb/gadget/u_ether.c:738:24: error: 'qmult' undeclared (first use in this function)
if (dev->tx_qlen == (qmult/2)) {
which was caused by commits
commit 79467317949e1621240f632acfb7453783bec2e7
USB: gadget: u_ether: Fix data stall issue in RNDIS tethering mode
commit 68b91e8c54f5c091986c5719631893b10eab760a
usb: u_ether: Add workqueue as bottom half handler for rx data path
Change-Id: Ic4e5a1e08cb688e5a606c7c1895f869d8f887b9f
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Android userspace UsbDeviceManager relies on the
uevents generated by the composition driver to
generate user notifications. This CL adds uevents
to be generated whenever USB changes its state
i.e. connected, disconnected, configured.
This CL also intercepts the setup requests from
the usb_core anb routes it to the specific
usb function if required.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: Ib3d3a78255a532f7449dac286f776c2966caf8c1
Add a pointer to the usb_function inside the
usb_function_instance structure to service
functions specific setup requests even before
the function gets added to the usb_gadget
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I6f457006f6c5516cc6986ec2acdf5b1ecf259d0c
This patch adds support to use mtp/ptp gadget functions
through the DECLARE_USB_FUNCTION_INIT interface.
enabling USB_CONFIGFS_F_MTP config compiles f_mtp.c
thereby providing support for MTP gadget
enabling USB_CONFIGFS_F_PTP config compiles f_ptp.c
thereby providing support for PTP gadget
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Change-Id: I38d7b570e8886d155ef10cd2c839b2232dcb3158
Currently DL aggregation is supported in RNDIS driver and is set to
3 by default. And there is no support to change downlink maximum
packets per transfer at runtime through module parameter. Hence add
module parameter for DL maximum packets per transfer to change it at
runtime.
echo 6 > /sys/module/g_android/parameters/rndis_dl_max_pkt_per_xfer
To disable DL aggregation during runtime,
echo 1 > /sys/module/g_android/parameters/rndis_dl_max_pkt_per_xfer
Change-Id: I3a1d0bc97358e2b6f233df7ae8725fb507de50db
Signed-off-by: Xerox Lin <xerox_lin@htc.com>
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
This change adds module param which allows to disable RNDIS
Multi-packet Feature (Aggregation support in Downlink path)
as this feature is enabled by default.
To disable use this param before moving to RNDIS Composition:
echo 1 > /sys/module/g_android/parameters/rndis_multipacket_dl_disable
Also counts errors as Rx errors if received RNDIS packets are
not following RNDIS message format as those packets are being
discarded.
Change-Id: I764430da78f2204af92e14bb279c11b24c7e4c67
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Add data aggregation support using RNDIS Multi Packet feature
to achieve better UDP Downlink throughput. Max 3 RNDIS Packets
aggregated into one RNDIS Packet with this implementation.
With this change, seeing UDP Downlink throughput increase
from 90 Mbps to above 100 Mbps when using Iperf and sending
data more than 100 Mbps.
Change-Id: I21c39482718944bb1b1068bdd02f626531e58f08
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Rajkumar Raghupathy <raghup@codeaurora.org>
For dual speed gadget, with current no. of request(10), there is
possibility of corner case occurence where all 10 reuqests are queued
to HW without setting IOC bit, which could lead to data stall in
RNDIS tethering and RNDIS local networking.
With this patch, counter will be incremented before queueing request to
HW and sets IOC bit for every nth request due to which the corner case
of all requests queued to HW without IOC bit set will be avoided.
Change-Id: I26515bfd9bbc8f7af38be7835692143f7093118a
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
On windows 7 platform, previously allocated ip address is maintained.
However, Host MAC address of 'usb0' interface is changed when the
tethering driver re-enumerated. Thus, the tethering network driver
can't be allocated ip address from dhcp. It causes connection delay
between host and phone for usb tethering.
This patch prevents from changing Host MAC address of 'usb0' interface.
In other words, this patch maintains the Host MAC address allocated when
first tethering driver although the driver is re-enumerated. However,
after reboot, the Host MAC address can be changed.
Change-Id: I43add9925e9d6d90c56cffbd3ed999104448f818
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
u_ether driver passes rx data to network layer and resubmits the
request back to usb hardware in interrupt context. Network layer
processes rx data by scheduling tasklet. For high throughput
scenarios on rx data path driver is spending lot of time in interrupt
context due to rx data processing by tasklet and continuous completion
and re-submission of the usb requests which results in watchdog bark.
Hence move the rx data processing and usb request submission to a
workqueue bottom half handler.
Change-Id: I316de8e267997137ac189a8b7b2846fa325f4a5a
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
RNDIS protocol supports data aggregation on uplink and can help
reduce mips by reducing number of interrupts on device. Throughput
also improved by 20-30%. Aggregation is disabled by setting
aggregation packet size to 1. To help better UL throughput, set
as ul aggregation support to 3 rndis packets by default. It can be
configured via module parameter: rndis_ul_max_pkt_per_xfer.
Change-Id: I0b62a21a5c3ceb6b04933d0d6da33301dbafe493
Signed-off-by: Vamsi Krishna <vskrishn@codeaurora.org>
Signed-off-by: Xerox Lin <xerox_lin@htc.com>
When rndis data transfer is in progress, some Windows7 Host PC is not
sending the GET_ENCAPSULATED_RESPONSE command for receiving the response
for the previous SEND_ENCAPSULATED_COMMAND processed.
The rndis function driver appends each response for the
SEND_ENCAPSULATED_COMMAND in a queue. As the above process got corrupted,
the Host sends a REMOTE_NDIS_RESET_MSG command to do a soft-reset.
As the rndis response queue is not freed, the previous response is sent
as a part of this REMOTE_NDIS_RESET_MSG's reset response and the Host
blocks any more Rndis transfers.
Hence free the rndis response queue as a part of this soft-reset so that
the current response for REMOTE_NDIS_RESET_MSG is sent properly during the
response command.
Change-Id: I8eff3849db452fe01b7d1fe4140ef1f1ad3f4fd4
Signed-off-by: Rajkumar Raghupathy <raghup@codeaurora.org>
Signed-off-by: Xerox Lin <xerox_lin@htc.com>
Fixed Android Issue #56549.
When both Vendor Class and Audio Class are activated for AOA 2.0,
the baInterfaceNr of the AudioControl Interface Descriptor points
to wrong interface numbers. They should be pointing to
Audio Control Device and Audio Streaming interfaces.
Replaced baInterfaceNr with the correct value.
Change-Id: Iaa083f3d97c1f0fc9481bf87852b2b51278a6351
Signed-off-by: Anson Jacob <ansonkuzhumbil@gmail.com>
Re-applying from
eb4c9d2db8
Most USB-AUDIO devices are limited to 256 byte for max iso buffer size.
If a IN_EP_MAX_PACKET_SIZE is bigger than a USB-AUDIO device's max iso
buffer size, it will cause noise. This patch will prevent this case as
possibe by reducing packet size. When using 44.1khz, 2ch, 16bit audio
data, if max packet size is bigger than 176 bytes, it's no problem.
Credits to: Iliyan Malchev <malchev@google.com>
Change-Id: Ic2a1c19ea65d5fb42bf12926b51b255b465d7215
Signed-off-by: Anson Jacob <ansonkuzhumbil@gmail.com>
Accessory connected to Android Device requires
Zero Length Packet (ZLP) to be written when data
transferred out from the Android device are multiples
of wMaxPacketSize (64bytes (Full-Speed) / 512bytes (High-Speed))
to end the transfer.
Change-Id: Ib2c2c0ab98ef9afa10e74a720142deca5c0ed476
Signed-off-by: Anson Jacob <ansonkuzhumbil@gmail.com>
Move the entire contents of linux/usb/f_accessory.h header to uapi,
it only contains a userspace interface.
Change-Id: Ieb5547da449588ae554988a201c0e6b4e3afc531
Signed-off-by: Colin Cross <ccross@android.com>
Move the most of linux/usb/f_mtp.h header to uapi. Move the only
remaining structure definition into f_mtp.c, the only place that
uses it.
Change-Id: I952c1a9dc15c36bf295a0eb4d74b6b1ad912ed03
Signed-off-by: Colin Cross <ccross@android.com>
Android MTP gadget uses 3 endpoints which are 1 in endpoint,
1 out endpoint, and 1 interrupt endpoint. However when MTP
gadget creates its endpoints, it creates the out endpoint twice
and overwrites the first created out endpoint with the second one,
so that it causes a leak of endpoint resources.
Change-Id: Iba82950095610b26b362f4b10a67cedfb1fee366
Signed-off-by: Peter Oh <poh@broadcom.com>
Reviewed-on: http://mps-gerrit.broadcom.com/37744
Reviewed-by: Graham Williams <gwilli@broadcom.com>
Reviewed-by: John Garry <jgarry@broadcom.com>
Branch-Open: Branch Status <branch_status_noreply@broadcom.com>
Reviewed-by: Checkpatch Status <checkpatch_status_noreply@broadcom.com>
Reviewed-by: Joyjit Nath <joyjit@broadcom.com>
Tested-by: AutoSubmit Status <autosubmit_status_noreply@broadcom.com>
create_bulk_endpoints should not be __init since it is called when
accessory is enabled.
Change-Id: Iac6e9f29d53c93760e926efd8e7603432632acb4
Signed-off-by: Todd Poynor <toddpoynor@google.com>
This driver presents a standard USB audio class interface to the host
and an ALSA PCM device to userspace
Change-Id: If16b14a5ff27045f9cb2daaf1ae9195c5eeab7d0
Signed-off-by: Mike Lockwood <lockwood@google.com>
The control request will be used by the host to enable/disable USB audio
and the ioctl will be used by userspace to read the audio mode
Change-Id: I81c38611b588451e80eacdccc417ca6e11c60cab
Signed-off-by: Mike Lockwood <lockwood@google.com>
create_bulk_endpoints should not be __init since it is called when
accessory is enabled
Change-Id: If827a4531f0f6c15af938345163923186368e2a5
Signed-off-by: Benoit Goby <benoit@android.com>
When adb is enabled, only connect the gadget when adbd is ready. If adbd
dies or is restarted (e.g. "adb root"), the gadget is disconnected when
the adb device is close, and it is re-connected once adb re-open the
device.
- Add callbacks to adb, similar to FunctionFs callbacks, to notify the
gadget when the daemon is ready or closed.
- Refcount calls to android_enable/android_disable to enable the gadget
only once all the function daemons are ready.
- Add enable/disble to android_usb_function to notify the function when
it is added/removed from the list of enabled functions.
Change-Id: Id54ff85aec9cf8715c94b4f9bd6137a79ad58bfc
Signed-off-by: Benoit Goby <benoit@android.com>
When an ep_out req is dequeued because of userspace freezing,
don't set the error flag.
Change-Id: I680f1a1059b8ac2244aaa069e7d42dc44abf98e9
Signed-off-by: Colin Cross <ccross@android.com>
wait_event_interruptible in adb_read might return -ERESTARTSYS if
userspace is frozen during adb_read or another signal is delivered
to adb. If so, don't set dev->error to avoid resetting the adb
connection.
Change-Id: I5a7baa013a9a3a3b5305de7e6a0d18546a560018
Signed-off-by: Colin Cross <ccross@android.com>
USB accessory mode allows users to connect USB host hardware
specifically designed for Android-powered devices. The accessories
must adhere to the Android accessory protocol outlined in the
http://accessories.android.com documentation. This allows
Android devices that cannot act as a USB host to still interact with
USB hardware. When an Android device is in USB accessory mode, the
attached Android USB accessory acts as the host, provides power
to the USB bus, and enumerates connected devices.
Change-Id: I67964b50d278f3c0471d47efbb7b0973a3502681
Signed-off-by: Mike Lockwood <lockwood@android.com>
Android Debug Bridge (adb) is a command line tool that lets
users communicate with a Android-powered device. It is used
mainly to debug applications and tranfer files. f_adb implements
the transport layer between the ADB Server (on the host) and the
ADBD daemon (on the device).
Change-Id: Ib11672fa3439dcb3a6588774b132b5a85e03e8ba
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB gadget function driver used by the Android framework to
implement the MTP and PTP protocols. It creates a character device
that provides an interface for fast transfer of files and
supports transferring files greater than 4GB.
Change-Id: I2d8f2c37029fb37d8deb791d04eb7346f94f5adb
Signed-off-by: Mike Lockwood <lockwood@android.com>
Since rx_bytes accounting does not include Ethernet Headers in
br_input.c, excluding ETH_HLEN on the transmit path for consistent
measurement of packet length on both the Tx and Rx chains.
The clean way would be for Rx to include the eth header, but the
skb len has already been adjusted by the time the br code sees the skb.
This is only a temporary workaround until we can completely ignore or
cleanly fix the skb->len handling.
Change-Id: I910de95a4686b2119da7f1f326e2154ef31f9972
Signed-off-by: Ashish Sharma <ashishsharma@google.com>
Some platforms do not want to power down rfkill devices on suspend.
Change-Id: I62a11630521c636d54a4a02ab9037a43435925f5
Signed-off-by: Nick Pelly <npelly@google.com>
