User space can remove the P2P management interface while it is active
(for example, while listen/search is active) and this can cause
a crash. Ensure the P2P device is fully stopped before removing.
Change-Id: Ibc94f12bc63f2ba31ede24afffd9c5acbf95467a
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 69fecf599f48e258984b2ffdf0a4c65a35a31287
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Connect can take longer than current timeout in some scenarios,
for example with long-range antenna array. Increase the timeout
to support these scenarios.
Change-Id: Id59cf4f11f8381ab8eab748171ef2b7949dde887
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: d83ad4c4fd78b22935711f865048bab78b43fc86
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
When FW starts running it can get D0 to D3 interrupt that is a leftover
from previous system suspend while FW was not running.
As this interrupt is not relevant anymore, clear it part of device reset
procedure.
Change-Id: I213a18fd59a500914ab22f75a72393786188a08e
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 7086d861753bc0aaa8b6445f657d8e39953e4fcd
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Re-arrange the code to have dedicated function for device configuration
which takes place before FW starts running.
Change-Id: Ia0f2b33f85ba9547bee9415e34143e5b09e28447
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 1490846d256af947a4743f04ba8c97dc3bc37073
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Align to latest version of the auto generated wmi file
describing the interface with FW.
Change-Id: I5cd2130c17457544d055aaff15f5747a3d241e23
Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 761f8e4d463e1cbf6da0d228bc74cecc800d4de5
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Since debugfs is a kernel configuration option, enable the driver to
compile without debugfs.
Change-Id: Id1b162172e2662a59af5b031a71ccd22250e4b6d
Signed-off-by: Gidon Studinski <qca_gidons@qca.qualcomm.com>
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 5f591dac9f20f76439df2e18570765d384a94070
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Sometimes there is a firmware crash but the hardware
is not fully stopped and continue to send TX/RX interrupts.
This can cause an overload of messages which can bring the
host down. Add ratelimit to these error messages to fix this.
Change-Id: If0f8bfbec1df1c5d98c87d64191ef14bf6579ae1
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 40cbd88be702a2455b6e047dc13f5d51ed542063
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use
tty_port_close") created a case where a port used for a console does not
get shutdown on tty closing. Then a call to uart_tx_stopped() segfaults
because the tty is NULL. This could be fixed to restore old behavior,
but we also want to allow tty_ports to work without a tty attached. So
this change to allow a NULL tty_struct is needed either way.
Fixes: 761ed4a94582
("tty: serial_core: convert uart_close to use tty_port_close")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change-Id: Ifbeeacc89d396b857332ce94cc2d77bdd6e12bb7
Git-repo: git://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git
Git-commit: a727b025f43d7952c0697562f5cecda9f42758aa
Signed-off-by: Lei wang <leiwan@codeaurora.org>
Currently, FULL_SOC and MONOTONIC_SOC registers are updated
multiple times when the recharge SOC threshold is close enough to
trigger the recharging frequently. This was leading to a SOC
fluctuation when SOC masking algorithm is enabled.
Rearrange charge_full_update used in SOC masking algorithm such
that FULL_SOC and MONOTONIC_SOC registers are updated just once
when the charge_full flag is cleared.
Also, when the device is rebooted/shutdown and if charge_full
flag is set, write to FULL_SOC with battery_soc and a full value
to MONOTONIC_SOC registers. This helps to maintain the same SOC
across a device reboot.
Change-Id: I95afa90f27e4c0f948f301ff8d6a1f84ae422ef0
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Add a device tree node for the SPI CAN controller to enable
a CAN network interface for msm8996 CV2X boards.
Change-Id: Ib9c1d63bf86e3b823aa8d762065ed374bdfeaa0e
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Enable configuration for K61 CAN over SPI driver.
Change-Id: I801629ac04303582530bed354282960db8f9c9ab
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Add new parameters to account for different MCUs that can
be used with this driver. These devices have different reset
sequences and number of bits per word supported via SPI. Add
bindings for the mpc5746c controller and make the reset signal
optional.
Change-Id: I616dd3cfedf18a6e21683e1c07551c57c62a675d
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
This driver creates Network device of type CAN
and processes tx and rx frames that it sends and
receives over SPI protocol.
Change-Id: I54a8665d1b9eda7e9b1ff695bd67de312c410195
Signed-off-by: Gustavo Solaira <gustavos@codeaurora.org>
Signed-off-by: Abinaya P <abinayap@codeaurora.org>
The patch adds the support for buffering mode configuration
for peripherals not supporting diag_id.
CRs-Fixed: 2104591
Change-Id: I2ed34a5141a9b9042dc925c9109d22009b272484
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
Increase QMI ATHDIAG maximum data size to 6144 bytes so that it
can dump more bytes for debugging.
Change-Id: I21d6197ad67829c38586318d4e76a7c7fd4149c4
CRs-fixed: 2059087
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Current SD card resume function does not handle card
init failure but only prints resume error message.
This change powers off mmc host before exit resume
if card init fails.
Change-Id: Idc27d8ed8769b92373bb9770f5e706b18e76404d
Signed-off-by: Can Guo <cang@codeaurora.org>
The WFD setup path has few register writes. If the MDP clocks
aren't switched on, the register access might cause SMMU
faults. Turn on the clocks, before calling WFD setup.
Change-Id: Icc865178f43dc6068b6b4b201b8f9eada2570598
Signed-off-by: Krishna Chaitanya Devarakonda <kdevarak@codeaurora.org>
There is a race condition possible when two threads are calling
the rotator cancel request. This might result in accessing a pointer
which was already assigned NULL. Fixing this by adding an extra check.
Change-Id: I9ce321a5f033d1fdc9d8b70a04098bfba3d7baaa
Signed-off-by: Krishna Chaitanya Devarakonda <kdevarak@codeaurora.org>
Provide means to suspend the DC path using the power supply
property.
Change-Id: I97f83f5f7c892fc078a92914af0a923b6aacf02e
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Implement several IOCTLs to allow IPA user space work.
Change-Id: I726f665ada12c5524dabeab1b89cdc8db4dc6f1e
Acked-by: Dmitry Kogan <dmitryk@qti.qualcomm.com>
Signed-off-by: Amir Levy <alevy@codeaurora.org>
If this quirk is set, then data timeout interrupt must not be
handled for R1B commands, as those commands may need larger
timeout value (larger than max timeout that controller can handle).
Change-Id: I7453b1914add21b47393b3eb1578d88e72da7406
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
