Update the snprintf() error handling in the
available_level_get() function to look for proper error
return value and take appropriate action.
Change-Id: Ifbe6450693a282105d9fddd02a756ae53d8cd892
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Update the lmh hardware driver to get the polling interval
value from the lmh interface driver, instead of using a local
static variable.
LMH interface driver already exposes debug interface to
configure the interval value.
Change-Id: Ie7d91519f197930ca513b30a671d8f6917d636b0
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
IPA RX HPS command queue resources need to be distributed
among the different resource groups (e.g. Uplink group).
The configuration is the maximum and minimum number of
resources that can be used by each group.
Change-Id: I02cf831b6ea6da812b67624fbb48bb829e4684d3
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
Make the various timeout values HZ agnostic by using the proper
macros and values instead.
Change-Id: I708cd491f593782f0172cd7d2cca058cd41044a5
Signed-off-by: Suman Tatiraju <sumant@codeaurora.org>
We might fail in alloc_iova if we run out
of virtual addresses in pool. Currently,
if we fail in alloc_iova we are not checking
for return value and directly going ahead
and mapping invalid IOVA address. Fix this
by explicitly checking for return value
from alloc_iova.
Change-Id: I7681d13b75f47a86f0b0b6cbf4b8405a7528ff66
Signed-off-by: Susheel Khiani <skhiani@codeaurora.org>
The cnss crypto add support for wlan host driver for security
Protocol and cipher key generation where cnss memory pre-alloc
feature enable wlan driver to use pre allocated memory
for its internal usage and release it to back to pre-allocated pool.
Decouple cnss crypto from cnss memory pre-alloc and add kernel
config flag for this crypto module compilation and update
the defocnfig of required targets.
CRs-Fixed: 949992
Change-Id: If34819fd76076ba522a9a42ac41fdae1f541f5c8
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
When files pages are very low, it is better to clear off
zcache pages, since the freed memory can be used to sustain
an application in foreground. Moreover when file pages
are too low, we don't gain much by holding a few zcache
pages.
Change-Id: I88dd295d24b7de18fb3bc0788e0baeb6bfdb2f6d
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
zero pages need not be compressed and stored unnecessarily.
Rather insert a special handle to the radix tree to identify
a zero page.
Change-Id: Ic92321c4753401a90d69a6e8c61b5119168c9df7
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Add radix_tree_gang_lookup_index to get the radix tree
indices along with the pointers. This will be helpful,
for e.g. if a radix_tree_delete has to be performed
depending on one of the result values.
Change-Id: Iab83d027968462aa30da5341fa3f60134b6c1137
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
zcache allocations happen during reclaim of pages,
and waking up kswapd at this time hinders system
performance. During tests it was seen that without
this patch, there were a lot of kswapd wakeups and
was resulting in bad launches.
Change-Id: Ic0f0240b8fdad6b3fe142b2bdc0366cfd870635e
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
zcache_pool_pages is supposed to store the total
pages in all the pools used by zcache. But at
present zcache_pool_pages is assigned pages of any
particular pool on a load, store or any operation
which modifies the pool size. And this is more
important for external clients which depend on zcache
pool size, like the lowmemorykiller.
Change-Id: Ifdaab8646c40f1fec71dfa5903658fbdc6b3cce5
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
When file pages drops down, at a point zcache pages
can be more than the file pages, and even further when
we have to reclaim the maximum number of file pages
possible to launch an application, we need a way to
reclaim even the zcache pages at least to an extend
which makes it match with the number of file pages.
This can help in better foreground headroom.
Change-Id: I481bfb9961ed5cee47ebeae08eb910bb269b644c
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
zcache store ops cannot sleep since it is called from
an atomic context. Pass the right flags to alloc functions.
Change-Id: I9c7956e895fb7909932315aa3d85845127aa02e1
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Implemented zbud_ops->evict, so that compressed zpages can be evicted from
zbud memory pool in the case that the compressed pool is full.
zbud already managered the compressed pool based on LRU. The evict was
implemented just by dropping the compressed file page data directly, if
the data is required again then no more disk reading can be saved.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Patch-mainline: linux-mm @ 2013-08-06 11:36:16
[vinmenon@codeaurora.org: trivial merge conflict fixes]
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Change-Id: Ia66652475e490f0233547511e80abf7587054e65
zcache is a backend for cleancache that takes file pages that are in the
process of being reclaimed and attempts to compress them and store them
in a RAM-based memory pool. This can result in a significant I/O reduction
if system is full with file pages and, in the case where decompressing
from RAM is faster than reading from the disk, can also improve workload
performance.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Patch-mainline: linux-mm @ 2013-08-06 11:36:14
[vinmenon@codeaurora.org: trivial merge conflict fixes, checkpatch fixes]
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Change-Id: Id05bcc1946eee22b94a83adeb0134a3f6e357ef8
Currently worker thread in cpe service is created twice.
The second thread handler overwrites the first one. The first
thread is not freed when the service is cleaned up. The fix
prevents creation of the redundant thread.
CRs-Fixed: 949165
Change-Id: Idd76b76d4f7f25d2592ca7c336dbee77b6efc7eb
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
This driver creates network device of type CAN
and processes tx and rx frames that it sends and
receives over SPI.
Change-Id: I903927d5bb0025c2ad3e9f1dd7cb51de547fc360
Signed-off-by: Alex Yakavenka <ayakav@codeaurora.org>
The current maximum length of an IPC Logging log context name is 20
characters. Some clients are now using names longer than this.
Increase the maximum length to 32. This change increases the IPC Logging
version to 3.
Change-Id: I9daecb8a7c6c3aea427efd1c75e307456e9c6c21
Signed-off-by: Steven Cahail <scahail@codeaurora.org>
Support using the cached write pointer for a BAM-to-Sys mode BAM
pipe when check if the desc FIFO of that pipe is full.
Change-Id: Ie480ecca9eff76388c504665b496e01bbf3e009f
Signed-off-by: Yan He <yanhe@codeaurora.org>
Slave synchronization is needed to sync frame shape consisting
of different ports with different sample rates. Change sets
the slave synchronization based on the frame shape.
Change-Id: Iae726555b3c158394662c590d1ebc781ff7f54f5
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Enable dual DSI for Agave board to support three displays.
Change-Id: I80e0c90e3d039a1777598f4038d9a1d18f23ca1b
Signed-off-by: Vinu Deokaran <vinud@codeaurora.org>
Add output format support for camif raw path
in isp.
Change-Id: If8e633175a5488b8da740654c8204b0247d3c408
Signed-off-by: Abhishek Kondaveeti <akondave@codeaurora.org>
There's an overflow when subtype id is greater than 3 in current
design. Add a check to ensure returning correct value.
Change-Id: Ie8d234792f7370c95782a86e16affd383ed53c18
Signed-off-by: Zhenhua Huang <zhenhuah@codeaurora.org>
Change reset and interrupt lines of codec from gpio to pinctrl
on 8996 target to control the drive strength of the pins.
Change-Id: Ie95b80699f1726c2b2e27c1b8e5f51f7ccdd5417
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
The channel is closed locally by the client either as part of SSR or normal
working scenario. The transmit operation does not check the transport or
channel states before queuing the packet for transmit operation. This
causes the transmit operation to access stale transport or channel context.
Check the transport and channel state before queuing the packet for
transmission.
CRs-Fixed: 947627
Change-Id: Ic6f8350b6b5e51b641794255f8520ff4616343bb
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
IPC Logging currently creates debugfs directories for each of its
logging contexts, but does not remove them when destroying the contexts.
If a user attempts to access a directory associated with a destroyed
context, a crash will result.
Destroy debugfs directories when the logging context is destroyed.
Change-Id: I5a3b1cbf2fb5d9d0ede3d9da0fccd605b9fdf619
Signed-off-by: Steven Cahail <scahail@codeaurora.org>
This reverts commit 9d9fb803fd88c493bd27f7b3af21358f8b16bfe2
("ARM: dts: msm: Enable dynamic refresh for sharp WQXGA panel")
since the dynamic refresh method enabled by the change is
causing random touch events to be triggered.
Change-Id: Ibfab4827c53635bd8c399b087a9a699f26c69dbc
Signed-off-by: Ingrid Gallardo <ingridg@codeaurora.org>
Changes to store forced port only in the original direction.
This resolves the MT call issue where destination port is
incorrectly translated to forced_port.
Change-Id: I1b1c407c4beb8185ada0b005b1cd1034cb975141
Signed-off-by: Ravinder Konka <rkonka@codeaurora.org>
These properties are no longer used and can be removed.
Change-Id: Iea376798a6a9da5ba5a0a6fa4e24c15c1cfe188d
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Add the BCR to reset USB20 block to gcc_usb20_master_clk. This will
allow the driver to correctly call clk_reset().
Change-Id: Ib4f8b73317032c88f5272a530007ff08d14dbd4a
Signed-off-by: Jack Pham <jackp@codeaurora.org>
A new smc cmd is added to check RPMB key provision status
Change-Id: I50411bf9ae7f31589be34d7b5aaf48f2c12f0018
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Change RX disconnect port sequence so as to avoid
slimbus underflow and audio mute issues during
playback.
Change-Id: I0260e61b78e3bcfe422896dc60b15af84be424a4
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
Update default value for VBat Bias current for Front-end.
The increase in current value is needed to increase
robustness of VBat ADC output when the feature is used
at low temparature.
Change-Id: Ic924fa59ce867f9b32c17564f8f55406c6c467ea
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Enable MBHC (Multi Button Headset Control) 5-pole
plug detection so as to detect the presence of
second microphone whenever any accessory is inserted
in to the headset jack.
Change-Id: I53dda0d18006109c19a1cd8ce0bc4df45a13f0bf
Signed-off-by: Phani Kumar Uppalapati <phaniu@codeaurora.org>
G-Link driver notifies IPC Router about receive events in atomic context.
Allocate the memory from atomic pool to cache the information about rx
events for deferred processing.
CRs-Fixed: 948393
Change-Id: I09fb7ffd38b5a36b9ef99b6adb76c7e1f0168457
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Disable the regulator devices which manage ACC settings for
memories powered by VDD_APCC in the CPUSS. In addition, update
the CPR3 controller and regulator devices which manage VDD_APCC
to ensure CPR corner changes do not result in configuring ACC
regulators.
Change-Id: Ib176c762d12e996e809ee0ccf0bc56d5ae37c0f3
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
_get_unmapped_area_topdown() subtracts the requested size
from lower entry base without really checking its value.
This leads to overflow while working at boundary conditions.
Add a condition to check entry base with the size and proceed.
Change-Id: Ic695da683b11de35c7c4b8936a35d693dc8fa452
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Initialize buffer manager spin lock before
using it
Change-Id: Icef09e9d40bbbe66e90c162dd0ae2f1733ae9a06
Signed-off-by: Abhishek Kondaveeti <akondave@codeaurora.org>
Dispatcher can acquire drawctxt->lock if context is pending
and the fence it is waiting on just got signalled.
Dispatcher acquires drawctxt->lock and tries to delete the
cmdbatch timer using delete_timer_sync(). Delete_timer_sync()
waits till timer and its pending handlers are deleted.
But if the timer expires at the same time, timer handler
could be waiting on drawctxt->lock leading to a
deadlock. To prevent this use spin_trylock_bh() instead of
spin_lock_bh(). spin_trylock_bh() does not wait for the lock
if it does not get it and allows the timer handler to finish.
This prevents the deadlock.
Change-Id: Ic2344fed5fccb581b58ec0b66b45ba68af9f1459
Signed-off-by: Tarun Karra <tkarra@codeaurora.org>
Hotplug events are particularly interesting from system
point of view and tracing around the hotplug events would
provide essential information that could be used to debug
system issues.
Change-Id: I23e9539a76e04e222a0a05f27be51cb726ab6c33
Signed-off-by: Sanrio Alvares <salvares@codeaurora.org>
add framework for IPAv2 active clients history logging
logging is enabled by default
cat /sys/kernel/debugfs/ipa/active_clients in order to view logs
echo anything to /sys/kernel/debugfs/ipa/active_clients in order
to clear the history log buffer
Change-Id: I975271798aee56ac9889d34203a32c99a30fc958
Signed-off-by: Valery Gorohovsky <valeryg@codeaurora.org>
Auto-refresh is used on smart displays to refresh display without
SW intervention, similar to dumb displays. So when it is on, display
controller will automatically send new frame every time panel TE signal
is received. Now as per the HW implementation, disabling auto-refresh
requires that display controller is idle and there is no frame transfer
on-going. To achieve this, we need to follow certain disable sequence.
To implement this disable sequence, clean up current implementation and
introduce auto-refresh state machine.
Change-Id: Iac5d76b6431f7ef2fcd68114e19c5cb5fb02577d
Signed-off-by: Ingrid Gallardo <ingridg@codeaurora.org>
Signed-off-by: Ujwal Patel <ujwalp@codeaurora.org>
Hardware might return/call the pending interrupt
on one CPU when same interrupt is disabled from other
core. Such parallel processing may lead to unclocked
register access in interrupt context followed by
panic. It is safe to check the interrupt line status
before handling isr to avoid crash in such race
condition.
Change-Id: I460550cb5188c7f77b9f741682917010f9231a50
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Display thread holds ov_lock followed by mutex, while the ESD
check thread for cmd mode panel holds mutex followed by ov_lock.
Fix this deadlock by acquiring mutex before ov_lock in ESD check
thread.
Change-Id: I857f780e14a6ccb679e89ff16b19706d205df4b6
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Send stream management message to sink after topology update. Poll
for new message or authentication required status after successful
receiver or repeater authentication. Also, DDC hardware polls sink
for a given time. Let the polling complete and do not treat intermediate
DDC errors as failures because DDC transaction can pass in next
iteration. Once polling ends, check for errors and timeouts and reset
polling data. Treat these errors as failure only after polling ends.
Change-Id: I286fb00cf935bff493e108c05df625d5ca3ade26
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
When device enters the idle power collapse mode, the entire
AD HW block is powered down, which will cause the previous
AD settings get lost. So when device exits the idle power
collapse mode, we need to store AD to previous state.
In order to achieve this, we need to switch AD mode to 0x85 first
and manually write the last AD strength value to AD register. Keep
this setting for couple of frames, in the meantime, kick off AD
calculator with t_filter_control value of 0 to ramp up the AD
strength from 0 to current target strength. Then switch the mode
back to auto strength (0x81).
Change-Id: Iddc12dbb0da06675141fa9fe049cfe90110defb9
Signed-off-by: Ping Li <pingli@codeaurora.org>
This change fixes the errors reported in static analysis
of MDSS driver code. These changes include fix for various
potential NULL pointer dereferencing and array index out of
bounds issues in MDP, DSI and PP module of MDSS driver.
Change-Id: I49f65f0b4e5218f9fc90469e9d431a3aec811ee2
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
