This reverts commit 566b44214c (smb138x:
introduce support for smb1355).
This is not required since smb1355 support is moved to its own driver.
Change-Id: Ibad8595c09a865e273adb6f30d6a75f931220131
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
This reverts commit 0f0e36134d ("smb138x:
use chg src bit to disable parallel charger)
This is not required, since smb1355 support is moved to its own driver.
Change-Id: I1bd454030d29195f03be132d167ec8294169b9d5
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Support faking input current limited state. This is very helpful
in testing/debugging the software based vbus changing algorithms.
Change-Id: I7cf548c94397ee680c9d65343c49ec7b16873e88
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Add POWER_SUPPLY_PROP_REAL_TYPE property for usb_psy to present its real
charger type. POWER_SUPPLY_PROP_TYPE in usb_psy is always set to
POWER_SUPPLY_TYPE_USB_PD for healthd to recognize it as an AC charger.
Also add usb_port_psy with POWER_SUPPLY_TYPE_USB type is added for healthd
to recognize it as an USB host. Their ONLINE properties will be updated
according to the VBUS status, type-c mode and real charger type.
With this type being set statically, update the usb phy and pd policy
engine code to look at real type.
Change-Id: I90aa69325cc82b09dfb513c0eeecbc61e092a57f
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Current driver implementation uses global variables to create
minidump elf header.
Move all elf global variables into a structure, and also replace
'msm_minidump_enabled' API with 'minidump_enabled' global variable.
And also add minidump_table address in elf, which would be useful
for parsers to get memory dump table addresses without vmlinux symbols.
Change-Id: I8829d88ce234179f429ae9537a3582df794c2cdf
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Current implementation uses pr_info to print error messages.
Update driver prints log level with pr_err instead of
pr_info, and also update with proper error number for
minidump table update failure return.
Change-Id: I27667715c71b361b9ee0f7856c94242d3ca21014
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
We recently renamed CONFIG_UID_CPUTIME, but didn't update all the
defconfigs.
Change-Id: Ic52f904d6ada3d0e32a8278ec95f7b34b29f96b9
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Fix the compilation issue seen due to the regulator framework
changes from 3.10 to 4.4 kernel. Also remove the redundant error
messages during the memory allocation failures.
Change-Id: I4887c2d3acaff562fb41e6c2eaeb2c1ef2c1bde5
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
During Mini dump collection, cache dump needs extra memory
and time hence disable it in perf builds.
Change-Id: I68aae6edf676c27b8443fdcc88ece05fa3a26748
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
After cold boot calibration WLAN FW send pin connect result to
platform driver through qmi indication message. To avoid uninitialized
access of pin connect result structure member initialize it properly.
CRs-Fixed: 2042000
Change-Id: I5654583e890f9ee67ddcc632aecd9ecb8a160062
Signed-off-by: Hardik Kantilal Patel <hkpatel@codeaurora.org>
On 4.4 kernel, 'commit 364549ddc2 ("mmc: core: Remove
redundant ->power_restore() callback for MMC")' removed
power_restore callback for MMC since mmc_reset is
implemented. Hence use reset instead of power_restore in
mmc_cmdq_hw_reset. Also modify the caller function mmc_cmdq_hw_reset
to properly use the mmc_reset.
Change-Id: Ia06d579401b6a083b164dff7a253d1eb3caef1a3
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
The eMMC HW reset may be implemented either via the host ops ->hw_reset()
callback or through DT and the eMMC pwrseq. Additionally some eMMC cards
don't support HW reset.
To allow a reset to be done for the different combinations of mmc hosts
and eMMC/MMC cards, let's implement a fallback via trying a regular power
cycle. This improves the mmc block layer retry mechanism of failing I/O
requests.
Change-Id: I5cafd54327cde22ea9599543382f1b294272a42c
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
[Ulf: Rewrote changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Git-commit: 4e6c71788d6bb0e5438fc9211fa6e52dcca01474
Git-repo: git://git.linaro.org/people/ulf.hansson/mmc.git
[vviswana@codeaurora.org: resolve trivial merge conflicts]
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
This is snapshot of the OnSemi NCP6335D driver as of msm-3.10
'commit 156ba1726643 ("regulator: onsemi-ncp6335d: Add i2c retry logic")'.
Change-Id: I4cf0acd272fcf498462d4397385cd62f144eadf8
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
MHI host and related drivers provide communication between
host and external modem. Enable it.
CRs-Fixed: 2041725
Change-Id: I1fbdfa7f17d158c1b6a33eb14497add495454bd1
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
Added new debugfs files/nodes to perform basic validation of the
per-buffer IO coherent dma-mapping that was recently implemented.
Also, added a node to print out the PTE for a given IOVA.
Nodes added:
dma_attach
dma_map
dma_unmap
dma_atos
virt_addr
pte
Change-Id: I041ab5f4e37e50dd3f58e2def3fdd3125a60629c
Signed-off-by: Sudarshan Rajagopalan <sudaraja@codeaurora.org>
