[ Upstream commit cc555759117e8349088e0c5d19f2f2a500bafdbd ]
ip_dev_find() can return NULL so add a check for NULL pointer.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 315ca92dd863fecbffc0bb52ae0ac11e0398726a ]
The sh_eth_close() resets the MAC and then calls phy_stop()
so that mdio read access result is incorrect without any error
according to kernel trace like below:
ifconfig-216 [003] .n.. 109.133124: mdio_access: ee700000.ethernet-ffffffff read phy:0x01 reg:0x00 val:0xffff
According to the hardware manual, the RMII mode should be set to 1
before operation the Ethernet MAC. However, the previous code was not
set to 1 after the driver issued the soft_reset in sh_eth_dev_exit()
so that the mdio read access result seemed incorrect. To fix the issue,
this patch adds a condition and set the RMII mode register in
sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs.
Note that when I have tried to move the sh_eth_dev_exit() calling
after phy_stop() on sh_eth_close(), but it gets worse (kernel panic
happened and it seems that a register is accessed while the clock is
off).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1659e27d2bc1ef47b6d031abe01b467f18cb72d9 ]
Currently the Book 3S KVM code uses kvm->lock to synchronize access
to the kvm->arch.rtas_tokens list. Because this list is scanned
inside kvmppc_rtas_hcall(), which is called with the vcpu mutex held,
taking kvm->lock cause a lock inversion problem, which could lead to
a deadlock.
To fix this, we add a new mutex, kvm->arch.rtas_token_lock, which nests
inside the vcpu mutexes, and use that instead of kvm->lock when
accessing the rtas token list.
This removes the lockdep_assert_held() in kvmppc_rtas_tokens_free().
At this point we don't hold the new mutex, but that is OK because
kvmppc_rtas_tokens_free() is only called when the whole VM is being
destroyed, and at that point nothing can be looking up a token in
the list.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6122ed2a4f9c9c1c073ddf6308d1b2ac10e0781 ]
In the vfs_statx() context, during path lookup, the dentry gets
added to sd->s_dentry via configfs_attach_attr(). In the end,
vfs_statx() kills the dentry by calling path_put(), which invokes
configfs_d_iput(). Ideally, this dentry must be removed from
sd->s_dentry but it doesn't if the sd->s_count >= 3. As a result,
sd->s_dentry is holding reference to a stale dentry pointer whose
memory is already freed up. This results in use-after-free issue,
when this stale sd->s_dentry is accessed later in
configfs_readdir() path.
This issue can be easily reproduced, by running the LTP test case -
sh fs_racer_file_list.sh /config
(https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/fs/racer/fs_racer_file_list.sh)
Fixes: 76ae281f63 ('configfs: fix race between dentry put and lookup')
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0692f0eef91354b62c2b4c94954536536be5425 ]
If I2C_M_RECV_LEN check failed, msgs[i].buf allocated by memdup_user
will not be freed. Pump index up so it will be freed.
Fixes: 838bfa6049 ("i2c-dev: Add support for I2C_M_RECV_LEN")
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e66b7cc50ef921121babc91487e1fb98af1ba6e ]
Building with Clang reports the redundant use of MODULE_DEVICE_TABLE():
drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table'
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table \
^
<scratch space>:90:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^
drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table \
^
<scratch space>:85:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^
This drops the one further from the table definition to match the common
use of MODULE_DEVICE_TABLE().
Fixes: 07563c711f ("EISA bus MODALIAS attributes support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9646f0f5bb62b7d43f0968f39d536cfe7123b53 ]
The gpio-adp5588 driver uses interfaces that are provided by
GPIOLIB_IRQCHIP, so select that symbol in its Kconfig entry.
Fixes these build errors:
../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_handler’:
../drivers/gpio/gpio-adp5588.c:266:26: error: ‘struct gpio_chip’ has no member named ‘irq’
dev->gpio_chip.irq.domain, gpio));
^
../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_setup’:
../drivers/gpio/gpio-adp5588.c:298:2: error: implicit declaration of function ‘gpiochip_irqchip_add_nested’ [-Werror=implicit-function-declaration]
ret = gpiochip_irqchip_add_nested(&dev->gpio_chip,
^
../drivers/gpio/gpio-adp5588.c:307:2: error: implicit declaration of function ‘gpiochip_set_nested_irqchip’ [-Werror=implicit-function-declaration]
gpiochip_set_nested_irqchip(&dev->gpio_chip,
^
Fixes: 459773ae8d ("gpio: adp5588-gpio: support interrupt controller")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f9fbe9bd86c534eba2faf5d840fd44c6049f50e ]
Similar to how decrementing rb->next too early can cause data_head to
(temporarily) be observed to go backward, so too can this happen when
we increment too late.
This barrier() ensures the rb->head load happens after the increment,
both the one in the 'goto again' path, as the one from
perf_output_get_handle() -- albeit very unlikely to matter for the
latter.
Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes: ef60777c9a ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.309516009@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b038c6e05ff70a1e66e3e571c2e6106bdb75f53 ]
In perf_output_put_handle(), an IRQ/NMI can happen in below location and
write records to the same ring buffer:
...
local_dec_and_test(&rb->nest)
... <-- an IRQ/NMI can happen here
rb->user_page->data_head = head;
...
In this case, a value A is written to data_head in the IRQ, then a value
B is written to data_head after the IRQ. And A > B. As a result,
data_head is temporarily decreased from A to B. And a reader may see
data_head < data_tail if it read the buffer frequently enough, which
creates unexpected behaviors.
This can be fixed by moving dec(&rb->nest) to after updating data_head,
which prevents the IRQ/NMI above from updating data_head.
[ Split up by peterz. ]
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: mark.rutland@arm.com
Fixes: ef60777c9a ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.224478157@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ac44ab608705948564791ce1d15d43ba81a1e38 ]
For F17h AMD CPUs, the CPB capability ('Core Performance Boost') is forcibly set,
because some versions of that chip incorrectly report that they do not have it.
However, a hypervisor may filter out the CPB capability, for good
reasons. For example, KVM currently does not emulate setting the CPB
bit in MSR_K7_HWCR, and unchecked MSR access errors will be thrown
when trying to set it as a guest:
unchecked MSR access error: WRMSR to 0xc0010015 (tried to write 0x0000000001000011) at rIP: 0xffffffff890638f4 (native_write_msr+0x4/0x20)
Call Trace:
boost_set_msr+0x50/0x80 [acpi_cpufreq]
cpuhp_invoke_callback+0x86/0x560
sort_range+0x20/0x20
cpuhp_thread_fun+0xb0/0x110
smpboot_thread_fn+0xef/0x160
kthread+0x113/0x130
kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x35/0x40
To avoid this issue, don't forcibly set the CPB capability for a CPU
when running under a hypervisor.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: jiaxun.yang@flygoat.com
Fixes: 0237199186e7 ("x86/CPU/AMD: Set the CPB bit unconditionally on F17h")
Link: http://lkml.kernel.org/r/20190522221745.GA15789@dev-dsk-fllinden-2c-c1893d73.us-west-2.amazon.com
[ Minor edits to the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccfb62f27beb295103e9392462b20a6ed807d0ea ]
The user can change the device_name with the IMSETDEVNAME ioctl, but we
need to ensure that the user's name is NUL terminated. Otherwise it
could result in a buffer overflow when we copy the name back to the user
with IMGETDEVINFO ioctl.
I also changed two strcpy() calls which handle the name to strscpy().
Hopefully, there aren't any other ways to create a too long name, but
it's nice to do this as a kernel hardening measure.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07a6d63eb1b54b5fb38092780fe618dfe1d96e23 ]
In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS"
to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged.
This results in the hypervisor console device to be listed as "ttyHV0" under
/proc/consoles while the device node is still named "ttyS0":
root@osaka:~# cat /proc/consoles
ttyHV0 -W- (EC p ) 4:64
tty0 -WU (E ) 4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyS0
root@osaka:~#
This means that any userland code which tries to determine the name of the
device file of the hypervisor console device can not rely on the information
provided by /proc/consoles. In particular, booting current versions of debian-
installer inside a SPARC LDOM will fail with the installer unable to determine
the console device.
After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well,
the inconsistency is fixed and it is possible again to determine the name
of the device file of the hypervisor console device by reading the contents
of /proc/console:
root@osaka:~# cat /proc/consoles
ttyHV0 -W- (EC p ) 4:64
tty0 -WU (E ) 4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyHV0
root@osaka:~#
With this change, debian-installer works correctly when installing inside
a SPARC LDOM.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6be8e297f9bcea666ea85ac7a6cd9d52d6deaf92 ]
lapb_register calls lapb_create_cb, which initializes the control-
block's ref-count to one, and __lapb_insert_cb, which increments it when
adding the new block to the list of blocks.
lapb_unregister calls __lapb_remove_cb, which decrements the ref-count
when removing control-block from the list of blocks, and calls lapb_put
itself to decrement the ref-count before returning.
However, lapb_unregister also calls __lapb_devtostruct to look up the
right control-block for the given net_device, and __lapb_devtostruct
also bumps the ref-count, which means that when lapb_unregister returns
the ref-count is still 1 and the control-block is leaked.
Call lapb_put after __lapb_devtostruct to fix leak.
Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 65a3c497c0e965a552008db8bc2653f62bc925a1 ]
Before taking a refcount, make sure the object is not already
scheduled for deletion.
Same fix is needed in ipv6_flowlabel_opt()
Fixes: 18367681a1 ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5f81656a18b271976a86724dadd8344e54de74e upstream.
This is adds the vendor and device id for the AT-VT-Kit3 which is a
pl2303-based device.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a6dd3fea131276a4fc44ae77b0f471b0b473577 upstream.
There is one more Realtek card reader requires ums-realtek to work
correctly.
Add the device ID to support it.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd21f0222adab64974b7d1b4b8c7ce6b23e9ea4d upstream.
This patch fixes the chipmunk-like voice that manifets randomly when
using the integrated mic of the Logitech Webcam HD C270.
The issue was solved initially for this device by commit 2394d67e44
("USB: add RESET_RESUME for webcams shown to be quirky") but it was then
reintroduced by e387ef5c47 ("usb: Add USB_QUIRK_RESET_RESUME for all
Logitech UVC webcams"). This patch is to have the fix back.
Signed-off-by: Marco Zatta <marco@zatta.me>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcd6aa7b6cbfd6f985f606c6f76046d782905820 upstream.
If SVGA_3D_CMD_DX_DEFINE_RENDERTARGET_VIEW is called with a surface
ID of SVGA3D_INVALID_ID, the srf struct will remain NULL after
vmw_cmd_res_check(), leading to a null pointer dereference in
vmw_view_add().
Cc: <stable@vger.kernel.org>
Fixes: d80efd5cb3 ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister <murray.mcallister@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ed7f4b5eca11c3c69e7c8b53e4321812bc1ee1e upstream.
If SVGA_3D_CMD_DX_SET_SHADER is called with a shader ID
of SVGA3D_INVALID_ID, and a shader type of
SVGA3D_SHADERTYPE_INVALID, the calculated binding.shader_slot
will be 4294967295, leading to an out-of-bounds read in vmw_binding_loc()
when the offset is calculated.
Cc: <stable@vger.kernel.org>
Fixes: d80efd5cb3 ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister <murray.mcallister@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 19ec166c3f39fe1d3789888a74cc95544ac266d4 ]
kselftests exposed a problem in the s390 handling for memory slots.
Right now we only do proper memory slot handling for creation of new
memory slots. Neither MOVE, nor DELETION are handled properly. Let us
implement those.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2924b52117b2812e9633d5ea337333299166d373 ]
According to the SDM, for MSR_IA32_PERFCTR0/1 "the lower-order 32 bits of
each MSR may be written with any value, and the high-order 8 bits are
sign-extended according to the value of bit 31", but the fixed counters
in real hardware are limited to the width of the fixed counters ("bits
beyond the width of the fixed-function counter are reserved and must be
written as zeros"). Fix KVM to do the same.
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94d250fae48e6f873d8362308f5c4d02cd1b1fd2 ]
Fix a racing condition in ipheth.c that can lead to slow performance.
Bug: In ipheth_tx(), netif_wake_queue() may be called on the callback
ipheth_sndbulk_callback(), _before_ netif_stop_queue() is called.
When this happens, the queue is stopped longer than it needs to be,
thus reducing network performance.
Fix: Move netif_stop_queue() in front of usb_submit_urb(). Now the order
is always correct. In case, usb_submit_urb() fails, the queue is woken up
again as callback will not fire.
Testing: This racing condition is usually not noticeable, as it has to
occur very frequently to slowdown the network. The callback from the USB
is usually triggered slow enough, so the situation does not appear.
However, on a Ubuntu Linux on VMWare Workstation, running on Windows 10,
the we loose the race quite often and the following speedup can be noticed:
Without this patch: Download: 4.10 Mbit/s, Upload: 4.01 Mbit/s
With this patch: Download: 36.23 Mbit/s, Upload: 17.61 Mbit/s
Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com>
Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0c0d902339249c75da85fd9257a86cbb98dfaa5 ]
Currently an int is being shifted and the result is being cast to a u64
which leads to undefined behaviour if the shift is more than 31 bits. Fix
this by casting the integer value 1 to u64 before the shift operation.
Addresses-Coverity: ("Bad shift operation")
Fixes: 7b59476912 ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8cb261a072c88ca1aff0e804a30db4c7606521b ]
There was a missing qualification of a valid ndlp structure when calling to
send an RRQ for an abort. Add the check.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b281218ad4311a0342a40cb02fb17a363df08b48 ]
There is an out-of-bounds access to "config[len - 1]" array when the
variable "len" is zero.
See commit dada6a43b040 ("kgdboc: fix KASAN global-out-of-bounds bug
in param_set_kgdboc_var()") for details.
Signed-off-by: Young Xiao <YangX92@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ad6eecbfc01c987e0253371f274c3872042e4350 upstream.
Add regcache_mark_dirty before regcache_sync for power
of codec may be lost at suspend, then all the register
need to be reconfigured.
Fixes: 0c516b4ff8 ("ASoC: cs42xx8: Add codec driver
support for CS42448/CS42888")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18fa84a2db0e15b02baa5d94bdb5bd509175d2f6 upstream.
A PF_EXITING task can stay associated with an offline css. If such
task calls task_get_css(), it can get stuck indefinitely. This can be
triggered by BSD process accounting which writes to a file with
PF_EXITING set when racing against memcg disable as in the backtrace
at the end.
After this change, task_get_css() may return a css which was already
offline when the function was called. None of the existing users are
affected by this change.
INFO: rcu_sched self-detected stall on CPU
INFO: rcu_sched detected stalls on CPUs/tasks:
...
NMI backtrace for cpu 0
...
Call Trace:
<IRQ>
dump_stack+0x46/0x68
nmi_cpu_backtrace.cold.2+0x13/0x57
nmi_trigger_cpumask_backtrace+0xba/0xca
rcu_dump_cpu_stacks+0x9e/0xce
rcu_check_callbacks.cold.74+0x2af/0x433
update_process_times+0x28/0x60
tick_sched_timer+0x34/0x70
__hrtimer_run_queues+0xee/0x250
hrtimer_interrupt+0xf4/0x210
smp_apic_timer_interrupt+0x56/0x110
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:balance_dirty_pages_ratelimited+0x28f/0x3d0
...
btrfs_file_write_iter+0x31b/0x563
__vfs_write+0xfa/0x140
__kernel_write+0x4f/0x100
do_acct_process+0x495/0x580
acct_process+0xb9/0xdb
do_exit+0x748/0xa00
do_group_exit+0x3a/0xa0
get_signal+0x254/0x560
do_signal+0x23/0x5c0
exit_to_usermode_loop+0x5d/0xa0
prepare_exit_to_usermode+0x53/0x80
retint_user+0x8/0x8
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v4.2+
Fixes: ec438699a9 ("cgroup, block: implement task_get_css() and use it in bio_associate_current()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31b90956b124240aa8c63250243ae1a53585c5e2 upstream.
Recently people report bcache code compiled with gcc9 is broken, one of
the buggy behavior I observe is that two adjacent 4KB I/Os should merge
into one but they don't. Finally it turns out to be a stack corruption
caused by macro PRECEDING_KEY().
See how PRECEDING_KEY() is defined in bset.h,
437 #define PRECEDING_KEY(_k) \
438 ({ \
439 struct bkey *_ret = NULL; \
440 \
441 if (KEY_INODE(_k) || KEY_OFFSET(_k)) { \
442 _ret = &KEY(KEY_INODE(_k), KEY_OFFSET(_k), 0); \
443 \
444 if (!_ret->low) \
445 _ret->high--; \
446 _ret->low--; \
447 } \
448 \
449 _ret; \
450 })
At line 442, _ret points to address of a on-stack variable combined by
KEY(), the life range of this on-stack variable is in line 442-446,
once _ret is returned to bch_btree_insert_key(), the returned address
points to an invalid stack address and this address is overwritten in
the following called bch_btree_iter_init(). Then argument 'search' of
bch_btree_iter_init() points to some address inside stackframe of
bch_btree_iter_init(), exact address depends on how the compiler
allocates stack space. Now the stack is corrupted.
Fixes: 0eacac2203 ("bcache: PRECEDING_KEY()")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Rolf Fokkens <rolf@rolffokkens.nl>
Reviewed-by: Pierre JUHEN <pierre.juhen@orange.fr>
Tested-by: Shenghui Wang <shhuiw@foxmail.com>
Tested-by: Pierre JUHEN <pierre.juhen@orange.fr>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca21f851cc9643af049226d57fabc3c883ea648e upstream.
The Acorn i2c driver (for RiscPC) triggers the "i2c adapter has no name"
warning in the I2C core driver, resulting in the RTC being inaccessible.
Fix this.
Fixes: 2236baa75f ("i2c: Sanity checks on adapter registration")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6581f5b55141a95657ef5742cf6a6bfa20a109f upstream.
Restore the read memory barrier in __ptrace_may_access() that was deleted
a couple years ago. Also add comments on this barrier and the one it pairs
with to explain why they're there (as far as I understand).
Fixes: bfedb589252c ("mm: Add a user_ns owner to mm_struct and fix ptrace permission checks")
Cc: stable@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f6e2aa91a46d2bc79fce9b93a988dbe7655c90c0 ]
Recently syzbot in conjunction with KMSAN reported that
ptrace_peek_siginfo can copy an uninitialized siginfo to userspace.
Inspecting ptrace_peek_siginfo confirms this.
The problem is that off when initialized from args.off can be
initialized to a negaive value. At which point the "if (off >= 0)"
test to see if off became negative fails because off started off
negative.
Prevent the core problem by adding a variable found that is only true
if a siginfo is found and copied to a temporary in preparation for
being copied to userspace.
Prevent args.off from being truncated when being assigned to off by
testing that off is <= the maximum possible value of off. Convert off
to an unsigned long so that we should not have to truncate args.off,
we have well defined overflow behavior so if we add another check we
won't risk fighting undefined compiler behavior, and so that we have a
type whose maximum value is easy to test for.
Cc: Andrei Vagin <avagin@gmail.com>
Cc: stable@vger.kernel.org
Reported-by: syzbot+0d602a1b0d8c95bdf299@syzkaller.appspotmail.com
Fixes: 84c751bd4a ("ptrace: add ability to retrieve signals without removing from a queue (v4)")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit be99ca2716972a712cde46092c54dee5e6192bf8 upstream.
ocfs2_dentry_attach_lock() can be executed in parallel threads against the
same dentry. Make that race safe. The race is like this:
thread A thread B
(A1) enter ocfs2_dentry_attach_lock,
seeing dentry->d_fsdata is NULL,
and no alias found by
ocfs2_find_local_alias, so kmalloc
a new ocfs2_dentry_lock structure
to local variable "dl", dl1
.....
(B1) enter ocfs2_dentry_attach_lock,
seeing dentry->d_fsdata is NULL,
and no alias found by
ocfs2_find_local_alias so kmalloc
a new ocfs2_dentry_lock structure
to local variable "dl", dl2.
......
(A2) set dentry->d_fsdata with dl1,
call ocfs2_dentry_lock() and increase
dl1->dl_lockres.l_ro_holders to 1 on
success.
......
(B2) set dentry->d_fsdata with dl2
call ocfs2_dentry_lock() and increase
dl2->dl_lockres.l_ro_holders to 1 on
success.
......
(A3) call ocfs2_dentry_unlock()
and decrease
dl2->dl_lockres.l_ro_holders to 0
on success.
....
(B3) call ocfs2_dentry_unlock(),
decreasing
dl2->dl_lockres.l_ro_holders, but
see it's zero now, panic
Link: http://lkml.kernel.org/r/20190529174636.22364-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reported-by: Daniel Sobe <daniel.sobe@nxp.com>
Tested-by: Daniel Sobe <daniel.sobe@nxp.com>
Reviewed-by: Changwei Ge <gechangwei@live.cn>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31f6264e225fb92cf6f4b63031424f20797c297d upstream.
We've received a bugreport that using LPM with ST1000LM024 drives leads
to system lockups. So it seems that these models are buggy in more then
1 way. Add NOLPM quirk to the existing quirks entry for BROKEN_FPDMA_AA.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c32ae35fbf9cffb7aa3736f44dec10c944ca18e upstream.
The call of unsubscribe_port() which manages the group count and
module refcount from delete_and_unsubscribe_port() looks racy; it's
not covered by the group list lock, and it's likely a cause of the
reported unbalance at port deletion. Let's move the call inside the
group list_mutex to plug the hole.
Reported-by: syzbot+e4c8abb920efa77bace9@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit d016dc1bd2 which is
commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream.
Lots of people have reported issues with this patch, and as there does
not seem to be a fix going into Linus's kernel tree any time soon,
revert the commit in the stable trees so as to get people's machines
working properly again.
Reported-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Cc: Jeremy Cline <jeremy@jcline.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The upstram commit 65d8fc777f6d ("futex: Remove requirement
for lock_page() in get_futex_key()") use variable 'page' as
the page head, when merge it to stable branch, the variable
`page_head` is page head.
In the stable branch, the variable `page` not means the page
head, when lock the page head, we should lock 'page_head',
rather than 'page'.
It maybe lead a hung task problem.
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4d8e3e951a856777720272ce27f2c738a3eeef8c ]
During early system resume on Exynos5422 with performance counters enabled
the following kernel oops happens:
Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1433 Comm: bash Tainted: G W 5.0.0-rc5-next-20190208-00023-gd5fb5a8a13e6-dirty #5480
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
...
Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 4451006a DAC: 00000051
Process bash (pid: 1433, stack limit = 0xb7e0e22f)
...
(reset_ctrl_regs) from [<c0112ad0>] (dbg_cpu_pm_notify+0x1c/0x24)
(dbg_cpu_pm_notify) from [<c014c840>] (notifier_call_chain+0x44/0x84)
(notifier_call_chain) from [<c014cbc0>] (__atomic_notifier_call_chain+0x7c/0x128)
(__atomic_notifier_call_chain) from [<c01ffaac>] (cpu_pm_notify+0x30/0x54)
(cpu_pm_notify) from [<c055116c>] (syscore_resume+0x98/0x3f4)
(syscore_resume) from [<c0189350>] (suspend_devices_and_enter+0x97c/0xe74)
(suspend_devices_and_enter) from [<c0189fb8>] (pm_suspend+0x770/0xc04)
(pm_suspend) from [<c0187740>] (state_store+0x6c/0xcc)
(state_store) from [<c09fa698>] (kobj_attr_store+0x14/0x20)
(kobj_attr_store) from [<c030159c>] (sysfs_kf_write+0x4c/0x50)
(sysfs_kf_write) from [<c0300620>] (kernfs_fop_write+0xfc/0x1e0)
(kernfs_fop_write) from [<c0282be8>] (__vfs_write+0x2c/0x160)
(__vfs_write) from [<c0282ea4>] (vfs_write+0xa4/0x16c)
(vfs_write) from [<c0283080>] (ksys_write+0x40/0x8c)
(ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Undefined instruction is triggered during CP14 reset, because bits: #16
(Secure privileged invasive debug disabled) and #17 (Secure privileged
noninvasive debug disable) are set in DSCR. Those bits depend on SPNIDEN
and SPIDEN lines, which are provided by Secure JTAG hardware block. That
block in turn is powered from cluster 0 (big/Eagle), but the Exynos5422
boots on cluster 1 (LITTLE/KFC).
To fix this issue it is enough to turn on the power on the cluster 0 for
a while. This lets the Secure JTAG block to propagate the needed signals
to LITTLE/KFC cores and change their DSCR.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ab99cf7d5e96e3b727c30e7a8524c976bd3723d ]
The PVDD_APIO_1V8 (LDO2) and PVDD_ABB_1V8 (LDO8) regulators were turned
off by Linux kernel as unused. However they supply critical parts of
SoC so they should be always on:
1. PVDD_APIO_1V8 supplies SYS pins (gpx[0-3], PSHOLD), HDMI level shift,
RTC, VDD1_12 (DRAM internal 1.8 V logic), pull-up for PMIC interrupt
lines, TTL/UARTR level shift, reset pins and SW-TACT1 button.
It also supplies unused blocks like VDDQ_SRAM (for SROM controller) and
VDDQ_GPIO (gpm7, gpy7).
The LDO2 cannot be turned off (S2MPS11 keeps it on anyway) so
marking it "always-on" only reflects its real status.
2. PVDD_ABB_1V8 supplies Adaptive Body Bias Generator for ARM cores,
memory and Mali (G3D).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b00ef53053191d3025c15e8041699f8c9d132daf ]
It must be made sure that immediate mode is not already set, when
modifying shadow register value in ehrpwm_pwm_disable(). Otherwise
modifications to the action-qualifier continuous S/W force
register(AQSFRC) will be done in the active register.
This may happen when both channels are being disabled. In this case,
only the first channel state will be recorded as disabled in the shadow
register. Later, when enabling the first channel again, the second
channel would be enabled as well. Setting RLDCSF to zero, first, ensures
that the shadow register is updated as desired.
Fixes: 38dabd91ff0b ("pwm: tiehrpwm: Fix disabling of output of PWMs")
Signed-off-by: Christoph Vogtländer <c.vogtlaender@sigma-surface-science.com>
[vigneshr@ti.com: Improve commit message]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ba846b1ee0792f5a596b9b0b86d6e8cdebfab06 ]
Intel IOMMU, when enabled, tries to find the domain of the device,
assuming it's a PCI one, during DMA operations, such as mapping or
unmapping. Since we are splitting the actual PCI device to couple of
children via MFD framework (see drivers/mfd/intel-lpss.c for details),
the DMA device appears to be a platform one, and thus not an actual one
that performs DMA. In a such situation IOMMU can't find or allocate
a proper domain for its operations. As a result, all DMA operations are
failed.
In order to fix this, supply parent of the platform device
to the DMA engine framework and fix filter functions accordingly.
We may rely on the fact that parent is a real PCI device, because no
other configuration is present in the wild.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [for tty parts]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da38ef3ed10a09248e13ae16530c2c6d448dc47d ]
We are currently assuming all GPIOs are non-wakeup capable GPIOs as we
not configuring the bank->non_wakeup_gpios like we used to earlier with
platform_data.
Let's add omap_gpio_is_off_wakeup_capable() to make the handling clearer
while considering that later patches may want to configure SoC specific
bank->non_wakeup_gpios for the GPIOs in wakeup domain.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
