The debug option to always ON the GPU clocks does not check the regulator
state. If the user tries to set this option while GPU is in Slumber state
then enabling clocks will fail.
Make sure we enable the GPU regulators before enabling its clocks.
Change-Id: Id77773224c674fe2e1b6179a039750b24e5e5f87
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Use metadata information sent from userspace to configure sink.
This info shall be used later on to program the HDMI specific
infoframe registers.
Change-Id: I26634452d8c3ab7ab49a65e89ad52a3961c64855
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Currently checking the IPIs even on cores which are hotplugged out
successfully. This check should happen only for cores which are
online.
Change-Id: I8fe49638f308eab97455e7cca62b01b617596de4
Signed-off-by: Naresh Malladi <namall@codeaurora.org>
Enable multichannel bit for SCO Rx to fix random 0 bytes
insertion in SCO.
CRs-Fixed: 2063152
Change-Id: I6abe986251d042ef70701b614b8cef0ee1e30044
Signed-off-by: Satish Kodishala <skodisha@codeaurora.org>
SDE drm driver should support the default color
component order instead of operating system
specific order. For opensource compositor; it will
use default color component order while android
compositors will take care of reversing the color
component order.
Change-Id: I61b953ce892834453e92a8c2cfdcb427456966bb
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Patch adds RGB 10bit both linear and compressed, P010 linear and
and TP10 compressed pixel formats to plane and writeback capabilities.
Change-Id: Ib5a0b2dacbc1ddc47c069b4348c0d1b9fbd7701e
Signed-off-by: Alexander Beykun <abeykun@codeaurora.org>
Currently for NV12 linear/compressed format if the same gem
object assigned to both planes, total size becomes twice more
than actually allocated. In that case kernel cannot detect
case where meta data planes not allocated for NV12 compressed
buffer and smmu fault happens. Current patch sums sizes only
for different gem objects allowing kernel to detect insufficient
memory allocation for NV12 case.
Change-Id: I0d9f49b8b310f0dff1fb787b4ba821a6d4a68140
Signed-off-by: Alexander Beykun <abeykun@codeaurora.org>
Patch changes type of pixel format flags from u32 to bitmap.
Change-Id: I117f3737d78d22b9bd6d78abdb8e96f52fc4e874
Signed-off-by: Alexander Beykun <abeykun@codeaurora.org>
Add MOD_QCOM_TIGHT modifier on top of DRM_FORMAT_NV12
base pixel format and update plane size calculation
to support compressed tp10 buffers.
Change-Id: I12eb9fecfd34d488eda92f6217b6ca51e466c6f6
Signed-off-by: Alexander Beykun <abeykun@codeaurora.org>
Add MOD_QCOM_DX modifier on top of DRM_FORMAT_NV12
base format and update plane size calculation to support
linear and compressed p010 buffers.
Change-Id: I93bd9557e5c4a4a038891f24730edbbec1dba262
Signed-off-by: Alexander Beykun <abeykun@codeaurora.org>
Populate HDR sink capabilities to a DRM blob.
These capabilities shall be used by the userspace
to calculate the sink HDR properties and setting them.
Change-Id: I7c2dbca375c456052ad73889b011553090bcf8f1
Signed-off-by: Srikanth Rajagopalan <rasrik@codeaurora.org>
Adding /lib64/firmware to the driver for loading firmware from
the target.
Change-Id: I1e489efc7e0d56991a0671950b88ce15afe3825b
Signed-off-by: Bharathraj Nagaraju <snbraj@codeaurora.org>
GSI MHI event ring error is a fatal error where there is
no recovery possible. Data path will be stalled.
This change will assert on this case.
Change-Id: I9c94e44b2f2d5e1b0b8d059b871d1bd9ad2d3fcf
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
Ringing IPA MHI event ring doorbell is done at MHI device
during MHI channel start. This is done after the rings
are allocated. The ring write pointer updated by the host is
used as the doorbell value. Doorbell ringing is required
in order to supply event credits to GSI H/W.
Change-Id: I2db110b4f99c8ab6c6878d426b3ebb37149b0b76
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
In case of failure to send QMI message to modem
remove the delay from AP since modem is probably
down (SSR\reboot).
Change-Id: Iae4d5162d39cd05f5c50d75087ec90dfe04a6c43
Signed-off-by: Amir Levy <alevy@codeaurora.org>
Defines the non-removable property for ufs/emmc device node
This basically lets the driver whether ufs/emmc is the boot
device
Change-Id: I7e583e0ecef064d1ed91b443fe35f98a3b2c0c8a
Signed-off-by: Lei wang <leiwan@codeaurora.org>
glink_pkt driver has no limit on number of intents auto queued for rx.
Intent are auto queued when remote side request for intent without checking
how many packets are pending to be read by client.
A max limit check is added to avoid memory exhaustion case with indefinite
intent queueing.
CRs-Fixed: 2042581
Change-Id: I68aa102b323716f591841b192477a70397a5536b
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>