commit de0dcc40f6e24d6bac6b60e36eac4659bbbd3f00 upstream.
This patch fixes using a wrong pointer for sum_page in f2fs_gc.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit c5616f2f874faa20b59b116177b99bf3948586df.
If we re-init the per-cpu boostgroup spinlock every time that
we add a new boosted cgroup, we can easily wipe out (reinit)
a spinlock struct while in a critical section. We should only
be setting up the per-cpu boostgroup data, and the spin_lock
initialization need only happen once - which we're already
doing in a postcore_initcall.
For example:
-------- CPU 0 -------- | -------- CPU1 --------
cgroupX boost group added |
schedtune_enqueue_task |
acquires(bg->lock) | cgroupY boost group added
| for_each_cpu()
| raw_spin_lock_init(bg->lock)
releases(bg->lock) |
BUG (already unlocked) |
|
This results in the following BUG from the debug spinlock code:
BUG: spinlock already unlocked on CPU#5, rcuop/6/68
Change-Id: I3016702780b461a0cd95e26c538cd18df27d6316
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
(cherry picked from commit ec8d7c14ea14922fe21945b458a75e39f11dd832)
Tetsuo has properly noted that mmput slow path might get blocked waiting
for another party (e.g. exit_aio waits for an IO). If that happens the
oom_reaper would be put out of the way and will not be able to process
next oom victim. We should strive for making this context as reliable
and independent on other subsystems as much as possible.
Introduce mmput_async which will perform the slow path from an async
(WQ) context. This will delay the operation but that shouldn't be a
problem because the oom_reaper has reclaimed the victim's address space
for most cases as much as possible and the remaining context shouldn't
bind too much memory anymore. The only exception is when mmap_sem
trylock has failed which shouldn't happen too often.
The issue is only theoretical but not impossible.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only backports mmput_async.
Change-Id: I5fe54abcc629e7d9eab9fe03908903d1174177f1
Signed-off-by: Arve Hjønnevåg <arve@android.com>
(from https://patchwork.kernel.org/patch/9954125/)
Use binder_alloc struct's mm_struct rather than getting
a reference to the mm struct through get_task_mm to
avoid a potential deadlock between lru lock, task lock and
dentry lock, since a thread can be holding the task lock
and the dentry lock while trying to acquire the lru lock.
Test: ran binderLibTest, throughputtest, interfacetest and
mempressure w/lockdep
Bug: 63926541
Change-Id: Icc661404eb7a4a2ecc5234b1bf8f0104665f9b45
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Sherry Yang <sherryy@android.com>
(from https://patchwork.kernel.org/patch/9954123/)
The vma argument in update_page_range is no longer
used after 74310e06 ("android: binder: Move buffer
out of area shared with user space"), since mmap_handler
no longer calls update_page_range with a vma.
Test: ran binderLibTest, throughputtest, interfacetest and mempressure
Bug: 36007193
Change-Id: Ibd6f24c11750f8f7e6ed56e40dd18c08e02ace25
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Sherry Yang <sherryy@android.com>
(from https://patchwork.kernel.org/patch/9945123/)
Drop the global lru lock in isolate callback
before calling zap_page_range which calls
cond_resched, and re-acquire the global lru
lock before returning. Also change return
code to LRU_REMOVED_RETRY.
Use mmput_async when fail to acquire mmap sem
in an atomic context.
Fix "BUG: sleeping function called from invalid context"
errors when CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
Bug: 63926541
Change-Id: I45dbada421b715abed9a66d03d30ae2285671ca1
Fixes: f2517eb76f1f2 ("android: binder: Add global lru shrinker to binder")
Reported-by: Kyle Yan <kyan@codeaurora.org>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Sherry Yang <sherryy@android.com>
The kernel config fragments for Android have moved into
their own repository located at
https://android.googlesource.com/kernel/configs/
Bug: 63994171
Change-Id: I837bac54cb5c90e6a6eb0f6f0ad5c90588c1a46a
Signed-off-by: Steve Muckle <smuckle@google.com>
If the cpufreq_register_governor fails, resources for thread
speedchange_task should be released.
currently, concerned resources are released in module_exit,
but if module loading fails, exit will not be called
and resources will remain acquired. this may leave kernel
in an unstable state.
Change-Id: Ic33f058c069d30bfd114fa1c1380325c8e00b51c
Signed-off-by: gaurav jindal <gauravjindal1104@gmail.com>
Commit b235beea9e99 ("Clarify naming of thread info/stack allocators")
breaks the build on some powerpc configs, where THREAD_SIZE < PAGE_SIZE:
kernel/fork.c:235:2: error: implicit declaration of function 'free_thread_stack'
kernel/fork.c:355:8: error: assignment from incompatible pointer type
stack = alloc_thread_stack_node(tsk, node);
^
Fix it by renaming free_stack() to free_thread_stack(), and updating the
return type of alloc_thread_stack_node().
Fixes: b235beea9e99 ("Clarify naming of thread info/stack allocators")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 38331309
Change-Id: I5b7f920b459fb84adf5fc75f83bb488b855c4deb
(cherry picked from commit 9521d39976db20f8ef9b56af66661482a17d5364)
Signed-off-by: Zubin Mithra <zsm@google.com>
-----BEGIN PGP SIGNATURE-----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=SSJQ
-----END PGP SIGNATURE-----
Merge 4.4.88 into android-4.4
Changes in 4.4.88
usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard
USB: serial: option: add support for D-Link DWM-157 C1
usb: Add device quirk for Logitech HD Pro Webcam C920-C
usb:xhci:Fix regression when ATI chipsets detected
USB: core: Avoid race of async_completed() w/ usbdev_release()
staging/rts5208: fix incorrect shift to extract upper nybble
driver core: bus: Fix a potential double free
intel_th: pci: Add Cannon Lake PCH-H support
intel_th: pci: Add Cannon Lake PCH-LP support
ath10k: fix memory leak in rx ring buffer allocation
Input: trackpoint - assume 3 buttons when buttons detection fails
rtlwifi: rtl_pci_probe: Fix fail path of _rtl_pci_find_adapter
Bluetooth: Add support of 13d3:3494 RTL8723BE device
dlm: avoid double-free on error path in dlm_device_{register,unregister}
mwifiex: correct channel stat buffer overflows
drm/nouveau/pci/msi: disable MSI on big-endian platforms by default
workqueue: Fix flag collision
cs5536: add support for IDE controller variant
scsi: sg: protect against races between mmap() and SG_SET_RESERVED_SIZE
scsi: sg: recheck MMAP_IO request length with lock held
drm: adv7511: really enable interrupts for EDID detection
drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled
drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
drm/bridge: adv7511: Re-write the i2c address before EDID probing
btrfs: resume qgroup rescan on rw remount
locktorture: Fix potential memory leak with rw lock test
ALSA: msnd: Optimize / harden DSP and MIDI loops
Bluetooth: Properly check L2CAP config option output buffer length
ARM: 8692/1: mm: abort uaccess retries upon fatal signal
NFS: Fix 2 use after free issues in the I/O code
xfs: XFS_IS_REALTIME_INODE() should be false if no rt device present
Linux 4.4.88
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit b31ff3cdf540110da4572e3e29bd172087af65cc upstream.
If using a kernel with CONFIG_XFS_RT=y and we set the RHINHERIT flag on
a directory in a filesystem that does not have a realtime device and
create a new file in that directory, it gets marked as a real time file.
When data is written and a fsync is issued, the filesystem attempts to
flush a non-existent rt device during the fsync process.
This results in a crash dereferencing a null buftarg pointer in
xfs_blkdev_issue_flush():
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: xfs_blkdev_issue_flush+0xd/0x20
.....
Call Trace:
xfs_file_fsync+0x188/0x1c0
vfs_fsync_range+0x3b/0xa0
do_fsync+0x3d/0x70
SyS_fsync+0x10/0x20
do_syscall_64+0x4d/0xb0
entry_SYSCALL64_slow_path+0x25/0x25
Setting RT inode flags does not require special privileges so any
unprivileged user can cause this oops to occur. To reproduce, confirm
kernel is compiled with CONFIG_XFS_RT=y and run:
# mkfs.xfs -f /dev/pmem0
# mount /dev/pmem0 /mnt/test
# mkdir /mnt/test/foo
# xfs_io -c 'chattr +t' /mnt/test/foo
# xfs_io -f -c 'pwrite 0 5m' -c fsync /mnt/test/foo/bar
Or just run xfstests with MKFS_OPTIONS="-d rtinherit=1" and wait.
Kernels built with CONFIG_XFS_RT=n are not exposed to this bug.
Fixes: f538d4da8d ("[XFS] write barrier support")
Signed-off-by: Richard Wareing <rwareing@fb.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 196639ebbe63a037fe9a80669140bd292d8bcd80 upstream.
The writeback code wants to send a commit after processing the pages,
which is why we want to delay releasing the struct path until after
that's done.
Also, the layout code expects that we do not free the inode before
we've put the layout segments in pnfs_writehdr_free() and
pnfs_readhdr_free()
Fixes: 919e3bd9a875 ("NFS: Ensure we commit after writeback is complete")
Fixes: 4714fb51fd ("nfs: remove pgio_header refcount, related cleanup")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 746a272e44141af24a02f6c9b0f65f4c4598ed42 upstream.
When there's a fatal signal pending, arm's do_page_fault()
implementation returns 0. The intent is that we'll return to the
faulting userspace instruction, delivering the signal on the way.
However, if we take a fatal signal during fixing up a uaccess, this
results in a return to the faulting kernel instruction, which will be
instantly retried, resulting in the same fault being taken forever. As
the task never reaches userspace, the signal is not delivered, and the
task is left unkillable. While the task is stuck in this state, it can
inhibit the forward progress of the system.
To avoid this, we must ensure that when a fatal signal is pending, we
apply any necessary fixup for a faulting kernel instruction. Thus we
will return to an error path, and it is up to that code to make forward
progress towards delivering the fatal signal.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e860d2c904d1a9f38a24eb44c9f34b8f915a6ea3 upstream.
Validate the output buffer length for L2CAP config requests and responses
to avoid overflowing the stack buffer used for building the option blocks.
Signed-off-by: Ben Seri <ben@armis.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20e2b791796bd68816fa115f12be5320de2b8021 upstream.
The ISA msnd drivers have loops fetching the ring-buffer head, tail
and size values inside the loops. Such codes are inefficient and
fragile.
This patch optimizes it, and also adds the sanity check to avoid the
endless loops.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196131
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196133
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: grygorii tertychnyi <gtertych@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c6b5a39c4bf3dbd8cf629c9f5450e983c19dbb9 upstream.
Several distributions mount the "proper root" as ro during initrd and
then remount it as rw before pivot_root(2). Thus, if a rescan had been
aborted by a previous shutdown, the rescan would never be resumed.
This issue would manifest itself as several btrfs ioctl(2)s causing the
entire machine to hang when btrfs_qgroup_wait_for_completion was hit
(due to the fs_info->qgroup_rescan_running flag being set but the rescan
itself not being resumed). Notably, Docker's btrfs storage driver makes
regular use of BTRFS_QUOTA_CTL_DISABLE and BTRFS_IOC_QUOTA_RESCAN_WAIT
(causing this problem to be manifested on boot for some machines).
Cc: Jeff Mahoney <jeffm@suse.com>
Fixes: b382a324b6 ("Btrfs: fix qgroup rescan resume on mount")
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3587c856675c45809010c2cee5b21096f6e8e938 upstream.
I've found that by just turning the chip on and off via the
POWER_DOWN register, I end up getting i2c_transfer errors on
HiKey.
Investigating further, it turns out that some of the register
state in hardware is getting lost, as the device registers are
reset when the chip is powered down.
Thus this patch simply re-writes the i2c address to the
ADV7511_REG_EDID_I2C_ADDR register to ensure its properly set
before we try to read the EDID data.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-7-git-send-email-john.stultz@linaro.org
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d5104c5a6b56385426e15047050584794bb6254 upstream.
In chasing down a previous issue with EDID probing from calling
drm_helper_hpd_irq_event() from irq context, Laurent noticed
that the DRM documentation suggests that
drm_kms_helper_hotplug_event() should be used instead.
Thus this patch replaces drm_helper_hpd_irq_event() with
drm_kms_helper_hotplug_event(), which requires we update the
connector.status entry and only call _hotplug_event() when the
status changes.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 518cb7057a59b9441336d2e88a396d52b6ab0cce upstream.
I was recently seeing issues with EDID probing, where
the logic to wait for the EDID read bit to be set by the
IRQ wasn't happening and the code would time out and fail.
Digging deeper, I found this was due to the fact that
IRQs were disabled as we were running in IRQ context from
the HPD signal.
Thus this patch changes the logic to handle the HPD signal
via a work_struct so we can be out of irq context.
With this patch, the EDID probing on hotplug does not time
out.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0bfcc22d9822947b0ad3095e8363eab5261864c upstream.
When the adv7511 i2c client doesn't have an interrupt line, we observe a
deadlock on caused by trying to lock drm device's mode_config.mutex twice
in the same context.
Here is the sequence that causes it:
ioctl DRM_IOCTL_MODE_GETCONNECTOR from userspace
drm_mode_getconnector (acquires mode_config mutex)
connector->fill_modes()
drm_helper_probe_single_connector_modes
connector_funcs->get_modes
adv7511_encoder_get_modes
adv7511_get_edid_block
adv7511_irq_process
drm_helper_hpd_irq_event (acquires mode_config mutex again)
In adv7511_irq_process, don't call drm_helper_hpd_irq_event when not
called from the interrupt handler. It doesn't serve any purpose there
anyway.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0be8584b01160eb6f49e77f8e9c1da286bb4ffb upstream.
The interrupts for EDID_READY or DDC_ERROR were never enabled in this
driver, so reading EDID always timed out when chip was powered down and
interrupts were used. Fix this and also remove clearing the interrupt
flags, they are cleared in POWER_DOWN mode anyhow (unlike the interrupt
enable flags) according to docs and my tests.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d26f491116feaa0b16de370b6a7ba40a40fa0b4 upstream.
Commit 1bc0eb044615 ("scsi: sg: protect accesses to 'reserved' page
array") adds needed concurrency protection for the "reserve" buffer.
Some checks that are initially made outside the lock are replicated once
the lock is taken to ensure the checks and resulting decisions are made
using consistent state.
The check that a request with flag SG_FLAG_MMAP_IO set fits in the
reserve buffer also needs to be performed again under the lock to ensure
the reserve buffer length compared against matches the value in effect
when the request is linked to the reserve buffer. An -ENOMEM should be
returned in this case, instead of switching over to an indirect buffer
as for non-MMAP_IO requests.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a8dadcca81fceff9976e8828cceb072873b7bd5 upstream.
Take f_mutex around mmap() processing to protect against races with the
SG_SET_RESERVED_SIZE ioctl. Ensure the reserve buffer length remains
consistent during the mapping operation, and set the "mmap called" flag
to prevent further changes to the reserved buffer size as an atomic
operation with the mapping.
[mkp: fixed whitespace]
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 591b6bb605785c12a21e8b07a08a277065b655a5 upstream.
Several legacy devices such as Geode-based Cisco ASA appliances
and DB800 development board do possess CS5536 IDE controller
with different PCI id than existing one. Using pata_generic is
not always feasible as at least DB800 requires MSR quirk from
pata_cs5536 to be used with vendor firmware.
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbf1c41fc0f4d3574ac2377245efd666c1fa3075 upstream.
Commit 0a94efb5acbb ("workqueue: implicit ordered attribute should be
overridable") introduced a __WQ_ORDERED_EXPLICIT flag but gave it the
same value as __WQ_LEGACY. I don't believe these were intended to
mean the same thing, so renumber __WQ_ORDERED_EXPLICIT.
Fixes: 0a94efb5acbb ("workqueue: implicit ordered attribute should be ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc60c90f472b6e762ea96ef384072145adc8d4af upstream.
It appears that MSI does not work on either G5 PPC nor on a E5500-based
platform, where other hardware is reported to work fine with MSI.
Both tests were conducted with NV4x hardware, so perhaps other (or even
this) hardware can be made to work. It's still possible to force-enable
with config=NvMSI=1 on load.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b5dde2d6234ff5bc68e97e6901d1f2a0a7f3749 upstream.
mwifiex records information about various channels as it receives scan
information. It does this by appending to a buffer that was sized
to the max number of supported channels on any band, but there are
numerous problems:
(a) scans can return info from more than one band (e.g., both 2.4 and 5
GHz), so the determined "max" is not large enough
(b) some firmware appears to return multiple results for a given
channel, so the max *really* isn't large enough
(c) there is no bounds checking when stashing these stats, so problems
(a) and (b) can easily lead to buffer overflows
Let's patch this by setting a slightly-more-correct max (that accounts
for a combination of both 2.4G and 5G bands) and adding a bounds check
when writing to our statistics buffer.
Due to problem (b), we still might not properly report all known survey
information (e.g., with "iw <dev> survey dump"), since duplicate results
(or otherwise "larger than expected" results) will cause some
truncation. But that's a problem for a future bugfix.
(And because of this known deficiency, only log the excess at the WARN
level, since that isn't visible by default in this driver and would
otherwise be a bit too noisy.)
Fixes: bf35443314 ("mwifiex: channel statistics support for mwifiex")
Cc: Avinash Patil <patila@marvell.com>
Cc: Xinming Hu <huxm@marvell.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc81bab5eeb103711925d7510157cf5cd2b153f4 upstream.
_rtl_pci_find_adapter fail path will jump to label fail3 for
unsupported adapter types.
However, on course for fail3 there will be call rtl_deinit_core
before rtl_init_core.
For the inclusion of checking pci_iounmap this fail can be moved to
fail2.
Fixes
[ 4.492963] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 4.493067] IP: rtl_deinit_core+0x31/0x90 [rtlwifi]
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 293b915fd9bebf33cdc906516fb28d54649a25ac upstream.
Trackpoint buttons detection fails on ThinkPad 570 and 470 series,
this makes the middle button of the trackpoint to not being recogized.
As I don't believe there is any trackpoint with less than 3 buttons this
patch just assumes three buttons when the extended button information
read fails.
Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f35a7f91f66af528b3ee1921de16bea31d347ab0 upstream.
The rx ring buffers are added to a hash table if
firmware support full rx reorder. If the full rx
reorder support flag is not set before allocating
the rx ring buffers, none of the buffers are added
to the hash table.
There is a race condition between rx ring refill and
rx buffer replenish from napi poll. The interrupts are
enabled in hif start, before the rx ring is refilled during init.
We replenish buffers from napi poll due to the interrupts which
get enabled after hif start. Hence before the entire rx ring is
refilled during the init, the napi poll replenishes a few buffers
in steps of 100 buffers per attempt. During this rx ring replenish
from napi poll, the rx reorder flag has not been set due to which
the replenished buffers are not added to the hash table
Set the rx full reorder support flag before we allocate
the rx ring buffer to avoid the memory leak.
Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efb3669e14fe17d0ec4ecf57d0365039fe726f59 upstream.
This adds Intel(R) Trace Hub PCI ID for Cannon Lake PCH-LP.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84331e1390b6378a5129a3678c87a42c6f697d29 upstream.
This adds Intel(R) Trace Hub PCI ID for Cannon Lake PCH-H.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f9b011d3321ca1079c7a46c18cb1956fbdb7bcb upstream.
The .release function of driver_ktype is 'driver_release()'.
This function frees the container_of this kobject.
So, this memory must not be freed explicitly in the error handling path of
'bus_add_driver()'. Otherwise a double free will occur.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34ff1bf4920471cff66775dc39537b15c5f0feff upstream.
The mask of sns_key_info1 suggests the upper nybble is being extracted
however the following shift of 8 bits is too large and always results in
0. Fix this by shifting only by 4 bits to correctly get the upper nybble.
Detected by CoverityScan, CID#142891 ("Operands don't affect result")
Fixes: fa590c222f ("staging: rts5208: add support for rts5208 and rts5288")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed62ca2f4f51c17841ea39d98c0c409cb53a3e10 upstream.
While running reboot tests w/ a specific set of USB devices (and
slub_debug enabled), I found that once every few hours my device would
be crashed with a stack that looked like this:
[ 14.012445] BUG: spinlock bad magic on CPU#0, modprobe/2091
[ 14.012460] lock: 0xffffffc0cb055978, .magic: ffffffc0, .owner: cryption contexts: %lu/%lu
[ 14.012460] /1025536097, .owner_cpu: 0
[ 14.012466] CPU: 0 PID: 2091 Comm: modprobe Not tainted 4.4.79 #352
[ 14.012468] Hardware name: Google Kevin (DT)
[ 14.012471] Call trace:
[ 14.012483] [<....>] dump_backtrace+0x0/0x160
[ 14.012487] [<....>] show_stack+0x20/0x28
[ 14.012494] [<....>] dump_stack+0xb4/0xf0
[ 14.012500] [<....>] spin_dump+0x8c/0x98
[ 14.012504] [<....>] spin_bug+0x30/0x3c
[ 14.012508] [<....>] do_raw_spin_lock+0x40/0x164
[ 14.012515] [<....>] _raw_spin_lock_irqsave+0x64/0x74
[ 14.012521] [<....>] __wake_up+0x2c/0x60
[ 14.012528] [<....>] async_completed+0x2d0/0x300
[ 14.012534] [<....>] __usb_hcd_giveback_urb+0xc4/0x138
[ 14.012538] [<....>] usb_hcd_giveback_urb+0x54/0xf0
[ 14.012544] [<....>] xhci_irq+0x1314/0x1348
[ 14.012548] [<....>] usb_hcd_irq+0x40/0x50
[ 14.012553] [<....>] handle_irq_event_percpu+0x1b4/0x3f0
[ 14.012556] [<....>] handle_irq_event+0x4c/0x7c
[ 14.012561] [<....>] handle_fasteoi_irq+0x158/0x1c8
[ 14.012564] [<....>] generic_handle_irq+0x30/0x44
[ 14.012568] [<....>] __handle_domain_irq+0x90/0xbc
[ 14.012572] [<....>] gic_handle_irq+0xcc/0x18c
Investigation using kgdb() found that the wait queue that was passed
into wake_up() had been freed (it was filled with slub_debug poison).
I analyzed and instrumented the code and reproduced. My current
belief is that this is happening:
1. async_completed() is called (from IRQ). Moves "as" onto the
completed list.
2. On another CPU, proc_reapurbnonblock_compat() calls
async_getcompleted(). Blocks on spinlock.
3. async_completed() releases the lock; keeps running; gets blocked
midway through wake_up().
4. proc_reapurbnonblock_compat() => async_getcompleted() gets the
lock; removes "as" from completed list and frees it.
5. usbdev_release() is called. Frees "ps".
6. async_completed() finally continues running wake_up(). ...but
wake_up() has a pointer to the freed "ps".
The instrumentation that led me to believe this was based on adding
some trace_printk() calls in a select few functions and then using
kdb's "ftdump" at crash time. The trace follows (NOTE: in the trace
below I cheated a little bit and added a udelay(1000) in
async_completed() after releasing the spinlock because I wanted it to
trigger quicker):
<...>-2104 0d.h2 13759034us!: async_completed at start: as=ffffffc0cc638200
mtpd-2055 3.... 13759356us : async_getcompleted before spin_lock_irqsave
mtpd-2055 3d..1 13759362us : async_getcompleted after list_del_init: as=ffffffc0cc638200
mtpd-2055 3.... 13759371us+: proc_reapurbnonblock_compat: free_async(ffffffc0cc638200)
mtpd-2055 3.... 13759422us+: async_getcompleted before spin_lock_irqsave
mtpd-2055 3.... 13759479us : usbdev_release at start: ps=ffffffc0cc042080
mtpd-2055 3.... 13759487us : async_getcompleted before spin_lock_irqsave
mtpd-2055 3.... 13759497us!: usbdev_release after kfree(ps): ps=ffffffc0cc042080
<...>-2104 0d.h2 13760294us : async_completed before wake_up(): as=ffffffc0cc638200
To fix this problem we can just move the wake_up() under the ps->lock.
There should be no issues there that I'm aware of.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6b422b88b46353cf596e0db6dc0e39d50d90d6e upstream.
The following commit cause a regression on ATI chipsets.
'commit e788787ef4f9 ("usb:xhci:Add quirk for Certain
failing HP keyboard on reset after resume")'
This causes pinfo->smbus_dev to be wrongly set to NULL on
systems with the ATI chipset that this function checks for first.
Added conditional check for AMD chipsets to avoid the overwriting
pinfo->smbus_dev.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain
failing HP keyboard on reset after resume")
cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1279ef74eeeb5f627f091c71d80dd7ac766c99d upstream.
Commit e0429362ab
("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e")
introduced quirk to workaround an issue with some Logitech webcams.
Apparently model C920-C has the same issue so applying
the same quirk as well.
See aforementioned commit message for detailed explanation of the problem.
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de3af5bf259d7a0bfaac70441c8568ab5998d80c upstream.
Corsair Strafe RGB keyboard has trouble to initialize:
[ 1.679455] usb 3-6: new full-speed USB device number 4 using xhci_hcd
[ 6.871136] usb 3-6: unable to read config index 0 descriptor/all
[ 6.871138] usb 3-6: can't read configurations, error -110
[ 6.991019] usb 3-6: new full-speed USB device number 5 using xhci_hcd
[ 12.246642] usb 3-6: unable to read config index 0 descriptor/all
[ 12.246644] usb 3-6: can't read configurations, error -110
[ 12.366555] usb 3-6: new full-speed USB device number 6 using xhci_hcd
[ 17.622145] usb 3-6: unable to read config index 0 descriptor/all
[ 17.622147] usb 3-6: can't read configurations, error -110
[ 17.742093] usb 3-6: new full-speed USB device number 7 using xhci_hcd
[ 22.997715] usb 3-6: unable to read config index 0 descriptor/all
[ 22.997716] usb 3-6: can't read configurations, error -110
Although it may work after several times unpluging/pluging:
[ 68.195240] usb 3-6: new full-speed USB device number 11 using xhci_hcd
[ 68.337459] usb 3-6: New USB device found, idVendor=1b1c, idProduct=1b20
[ 68.337463] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 68.337466] usb 3-6: Product: Corsair STRAFE RGB Gaming Keyboard
[ 68.337468] usb 3-6: Manufacturer: Corsair
[ 68.337470] usb 3-6: SerialNumber: 0F013021AEB8046755A93ED3F5001941
Tried three quirks: USB_QUIRK_DELAY_INIT, USB_QUIRK_NO_LPM and
USB_QUIRK_DEVICE_QUALIFIER, user confirmed that USB_QUIRK_DELAY_INIT alone
can workaround this issue. Hence add the quirk for Corsair Strafe RGB.
BugLink: https://bugs.launchpad.net/bugs/1678477
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This moves the code to adjust the gid/uid of lower filesystem
files under the mount flag derive_gid.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Change-Id: I44eaad4ef67c7fcfda3b6ea3502afab94442610c
Bug: 63245673
Fix double free on error paths
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Change-Id: I1c25a175e87e5dd5cafcdcf9d78bf4c0dc3f88ef
Bug: 65386954
Fixes: 6b42d02561 ("ANDROID: mnt: Add filesystem private data to mount points")
In cpufreq_governor_interactive, driver throws warning with WARN_ON
for !tunables and event != CPUFREQ_GOV_POLICY_INIT.
In case when tunables is NULL for event other than
CPUFREQ_GOV_POLICY_INIT, kernel will crash as there is no safe check
available before accessing tunables. So to handle such case and avoid
the kernel crash, return -EINVAL if WARN_ON returns TRUE.
Change-Id: I7a3a22d58e3c8a315a1cc1d31143649dc8807dee
Signed-off-by: gaurav jindal <gauravjindal1104@gmail.com>
Retrieve socket uid from the sk_uid field added to struct sk instead of
read it from sk->socket->file. It prevent the packet been dropped when
the socket file doesn't exist.
Bug: 37524657
Signed-off-by: Chenbo Feng <fengc@google.com>
Change-Id: Ic58239c1f9aa7e0eb1d4d1c09d40b845fd4e8e57
* fix skb->dev vs par->in/out
When there is some forwarding going on, it introduces extra state
around devs associated with xt_action_param->in/out and sk_buff->dev.
E.g.
par->in and par->out are both set, or
skb->dev and par->out are both set (and different)
This would lead qtaguid to make the wrong assumption about the
direction and update the wrong device stats.
Now we rely more on par->in/out.
* Fix handling when qtaguid is used as "owner"
When qtaguid is used as an owner module, and sk_socket->file is
not there (happens when tunnels are involved), it would
incorrectly do a tag stats update.
* Correct debug messages.
Bug: 11687690
Change-Id: I2b1ff8bd7131969ce9e25f8291d83a6280b3ba7f
CRs-Fixed: 747810
Signed-off-by: JP Abgrall <jpa@google.com>
Git-commit: 2b71479d6f5fe8f33b335f713380f72037244395
Git-repo: https://www.codeaurora.org/cgit/quic/la/kernel/mediatek
[imaund@codeaurora.org: Resolved trivial context conflicts.]
Signed-off-by: Ian Maund <imaund@codeaurora.org>
[bflowers@codeaurora.org: Resolved merge conflicts]
Signed-off-by: Bryse Flowers <bflowers@codeaurora.org>
Signed-off-by: Chenbo Feng <fengc@google.com>
