Update AUX camera cci master, and also update
rear and AUX camera sensor vdig configuration.
And update rear and aux sensor mount angle.
Change-Id: Iffab132fcfe1622d6716d027b30cb9f3c9a9795e
Signed-off-by: Kui Wang <kuiw@codeaurora.org>
The RBCPR client would not be able to remove it's vote during any low power
state, so move the clock to vote on active only voltage.
Change-Id: I859ad7eb5b4f604cd8785156a0354ed76d3622c0
Signed-off-by: Taniya Das <tdas@codeaurora.org>
The config vop of the ice driver has been updated to config_start.
Updated the sdhci-ice driver to reflect this change.
Change-Id: I7c44cc5011c6a7c88b9acf9cb9d8e61ef3f8e33a
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
We assume boot CPU as a sync CPU and initialize it's window_start
to sched_ktime_clock(). As windows are synchronized across all
CPUs, the secondary CPUs' window_start are initialized from the
sync_cpu's window_start. A CPU's window_start is never reset, so
this synchronization happens only once for a given CPU. Given this
fact, there is no need to reassigning the sync_cpu role to another
CPU when the boot CPU is going offline. Remove this unnecessary
maintenance of sync_cpu and use any online CPU's window_start as
reference.
Change-Id: I169a8e80573c6dbcb1edeab0659c07c17102f4c9
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Slimbus is used as audio transport for Bluetooth & FM between sdm660 &
wcn3990. Add device tree entry for wcn3990 slimbus slave device in sdm660.
Change-Id: I0766cfac9329e7d088e6997e20a27d902aca9f29
Signed-off-by: Rupesh Tatiya <rtatiya@codeaurora.org>
Usage of uninitialized variable remote_host happens if common partition
header hosts value dont match with TOC values.
Add common partition check and error log if hosts mismatch with TOC.
CRs-Fixed: 1113351
Change-Id: I15f8823751abccf87c55e570a8a762bfb2cfb2df
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Enable G-Link SPI Transport driver to enable off-chip communication
over SPI bus in 32 bit architecture.
CRs-Fixed: 1106989
Change-Id: I8826b1383811a03d91547414a5f6766aafa091d6
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
CMA pages are currently replaced in the FUSE file system since
FUSE may hold on to CMA pages for a long time, preventing migration.
The replacement page is added to the file cache but not the LRU
cache. This may prevent the page from being properly aged and dropped,
creating poor performance under tight memory condition. Fix this by
adding the new page to the LRU cache after creation.
Change-Id: Ib349abf1024d48386b835335f3fbacae040b6241
CRs-Fixed: 586855
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
The FUSE file system may hold references to pages for long
periods of time, preventing migration from occurring. If a CMA
page is used here, CMA allocations may fail. Work around this
by swapping out a CMA page for a non-CMA page when working with
the FUSE file system.
Change-Id: Id763ea833ee125c8732ae3759ec9e20d94aa8424
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Allow creating user process on remote processor with attributes
to be used during process creation for debugging purposes.
Change-Id: I63081f8ed44bd8e86392d82018ce4e632284c6ed
Acked-by: Viswanatham Paduchuri <vpaduchu@qti.qualcomm.com>
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
Enable GPU bus AB bus scaling votes for A540.
Change-Id: I3629094672f3321004725f6b8fcaf08604202221
CRs-Fixed: 1113143
Signed-off-by: Oleg Perelet <operelet@codeaurora.org>
Update subsystem name for slpi to ensure that the subsystem restart
notification is registered with the correct subsystem.
Change-Id: Ie4f409d6d63cd164323a2e58805b8154322518d1
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
Add parents to div_clk1 and ln_bbclk. And register
both the clocks independently.
Change-Id: Ic0435ebad533879e3e0648775956c91cc680644d
Signed-off-by: Yeleswarapu Nagaradhesh <nagaradh@codeaurora.org>
Update gpio settings as per HW VI audio
values. Also move common settings of external
and internal codecs to new files.
Change-Id: I0d3e0878972038a7876a063648156126b2a7cee4
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Enable the signal and message RX IRQs for wakeup. This allows
the system to be woken from suspend when the PD PHY receives
an incoming hard reset or SOP* message from a connected peer.
Change-Id: Ib6f4507ef363954c91271029874337497659da84
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Colocation in HMP includes a tunable that turns on or off the feature
globally across all colocation groups. Supporting this tunable correctly
would result in complexity that would outweigh any foreseeable benefits.
For example, disabling the feature globally would involve deleting all
colocation groups one by one while ensuring no placement decisions are
made during the process.
Remove the tunable. Adding or removing a task from a colocation group is
still possible and so we're not losing functionality.
Change-Id: I4cb8bcdbee98d3bdd168baacbac345eca9ea8879
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
There are certain conditions under which group_will_fit() may return 0 for
all clusters in the system, especially under changing thermal conditions.
This may result in crashes such as this one:
CPU 0 | CPU 1
====================================================================
select_best_cpu() |
-> env.rtg = rtgA |
rtgA.pref_cluster=C_big |
| set_pref_cluster() for rtgA
| -> best_cluster()
| C_little doesn't fit
|
| IRQ: thermal mitigation
| C_big capacity now less
| than C_little capacity
|
| -> best_cluster() continues
| C_big doesn't fit
| set_pref_cluster() sets
| rtgA.pref_cluster = NULL
|
select_least_power_cluster() |
-> cluster_first_cpu() |
-> BUG() |
To add lock protection around accesses to the group's preferred cluster
would be expensive and defeat the point of the usage of RCU to protect
access to the related_thread_group structure. Therefore, ensure that
best_cluster() can never return NULL. In the worst case, we'll select the
wrong cluster for a related_thread_group's demand, but this should be
fixed in the next tick or wakeup etc. Locking would have still led to the
momentary wrong decision with the additional expense!
Also, don't set preferred cluster to NULL when colocation is disabled.
Change-Id: Id3f514b149add9b3ed33d104fa6a9bd57bec27e2
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
