Make change in qseecom_probe() to improve the error return value
checks on some subfunctions, and free memory allocated within
qseecom_retrieve_ce_data.
CRs-fixed: 1075082
Change-Id: I971e555ec8d02ccf4382e83132a696b065a8ff12
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Starting commit Ie49eee9478f4657cfb2a994ba60da1ec4c356339
("msm: mdss: hide kernel addresses from unprevileged users"),
display driver removes the %p and uses %pK instead for printing kernel
pointers. This change missed some of the prints in some places.
This change fixes this by modifying the remaining pointer prints.
CRs-Fixed: 987021
Change-Id: I0d1797a4df9ff67f3b162a1b5d26320ca989f54a
Signed-off-by: Harsh Sahu <hsahu@codeaurora.org>
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This is a snapshot of the OSM clock driver as of msm-4.4
'commit 38833d6621 ("clk: msm: clock-osm: Request Nominal Fmax frequency
after OSM enable")'
Fix warnings for of_device_id and return from void function.
Change-Id: I242158975f212426268fd6eaf45378826d56d094
Signed-off-by: Taniya Das <tdas@codeaurora.org>
TMDS clock rate should be concerned in case of deep color
and scrambler. In deep color case TMDS clock should be
increased in order to transmit more bits, so this clock
rate should be checked against the maximum clock rate
allowed by sink. In scrambler case correct pixel clock
should be computed depending on video format and deep
color.
CRs-Fixed: 1086894
Change-Id: I78770eea7fdd57f12d92ff40ed8043987e742024
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
HDMI vic info should be updated as well when powering on
HDMI TX, otherwise the obsolete vic info is set to hardware.
CRs-Fixed: 1086894
Change-Id: Ia3ea67cc7658098928a442460198b2dccc8ff8e1
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
MSM falcon supports 10-bit decode. This commit will
parse 10-bit entries from dtsi and will use
corresponding bus table based on session type.
Change-Id: I7e3655be5c3ea0800499cf24c05899f3d518bbd6
Signed-off-by: Deepak Kushwah <dkushwah@codeaurora.org>
CRs-Fixed: 1087798
Initial support for all BLSP I2Cs with default configuration
and disabled state such that clients can overwrite and enable
respective I2C instance as per need.
Change-Id: If08ff46e72d537254e90707f28c849a86f262853
Signed-off-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
Initial support for all BLSP UARTs with default configuration
and disabled state such that clients can overwrite and enable
respective UART instance as per need.
Change-Id: I15ef73049cee76c6ea5b3916d9281bbd9fdfc563
Signed-off-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
Remove the secure_camera ctrl_id unless the support is available
from the sde rotator driver. If this id is defined and functionality
is not present in the V4L2 driver it causes the rotator use cases
to fail.
CRs-Fixed: 1090525
Change-Id: I48c50bc320425c0db40cd4865e05c6b7a7fb5da3
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Few alpha PLLs would require to be able to slew in the same VCO mode, which
means the PLL would be able to update the new frequency L value without
turning it off. But to be support this feature the PLL needs to calibrated
at the mid of the VCO range and then enabled.
Change-Id: I24820bd6254002f8a8db9604d230dcbce59b1beb
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Some RCGSs could have sources with dynamic frequencies and fixed sources
where if the RCG has the flag of CLK_SET_RATE_PARENT set, it would try to
propagate the clock rate to the fixed source PLLs too. To identify sources
of the RCGs where the rate should propagate to parent PLL, add a member in
freq_tbl to represent source frequency. This would be used by the
_freq_tbl_determine_rate to set its parent frequency on the PLL.
Change-Id: I7f1c0d9d84607821893a1e5d17934dae5acef5f4
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Add the clock operation list_registers which would print the register
content of a clock. This is supported for PLL/RCG/Branch/Gate clocks.
Also add support for list_rate for the RCG clock which would list all the
frequencies/rates supported by the SW.
Change-Id: I3b4cf83e776750d993d53331142223109bf0862e
Signed-off-by: Taniya Das <tdas@codeaurora.org>
The clock api clock_debug_print_enabled would allow any client like low
power driver to print all the enabled clocks which include the
prepare_count/enable_count/rate/rate max vote.
Change-Id: I936496e553bc958c10e743fd8a225ffc7fbc0f79
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Add support for clocks debugfs to be able to display
- rates_max which indicates the frequency to voltage mapping of a clock.
- list_rates, the list of clock frequencies supported by root clocks.
- Also display the rate_max associated with enabled clocks list.
Change-Id: I0a202af6f46c7cf164036d65487db5c40aab4063
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Update clock debugfs to support the below functionalities.
- Allow enable/disable a clock.
- Allow set_rate on a clock.
- Display the list of enabled_clocks along with prepare_count,
enable_count and rate.
- Display the register contents of all the clocks which support
this clock operation.
Change-Id: Ib67b3a3409c9e7d8adb710bb524f54f543abf712
Signed-off-by: Taniya Das <tdas@codeaurora.org>
If a client matching the SVID for an incoming SVDM is found,
assume it has handled the message completely and simply return.
This avoids the case when it handles an Attention message by
queuing another VDM request, only to have it inadvertently
deleted in the generic handling below.
But we also lose tracking of Discover/Enter/Exit Mode
exchanges though that was only used for informational purposes.
Change-Id: Ie23d473302d7fbda9b243a150e5c52d025007e4f
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Add clock of_idx entries for audio external clock registered
to the qcom clock framework.
Change-Id: Ie592d06d2e09c2e263a2e9485a42eafb368e49cc
Signed-off-by: Meng Wang <mwang@codeaurora.org>
vb2_queue_release uses mutex lock. So, the locks should be
destroyed at the end.
Change-Id: I8043a13d366fcb20a8a819c4739177258ad508ac
CRs-Fixed: 1086284
Signed-off-by: Karthikeyan Periasamy <kperiasa@codeaurora.org>
With syzkaller help, Marco Grassi found a bug in TCP stack,
crashing in tcp_collapse()
Root cause is that sk_filter() can truncate the incoming skb,
but TCP stack was not really expecting this to happen.
It probably was expecting a simple DROP or ACCEPT behavior.
We first need to make sure no part of TCP header could be removed.
Then we need to adjust TCP_SKB_CB(skb)->end_seq
Many thanks to syzkaller team and Marco for giving us a reproducer.
CRs-Fixed: 1089895
Change-Id: I84185558fa6e80b13d7d0078bda9d75143680941
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Marco Grassi <marco.gra@gmail.com>
Reported-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Git-commit: ac6e780070e30e4c35bd395acfe9191e6268bdd3
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
[subashab@codeaurora.org: resolve trivial merge conflicts]
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Sockets can have a filter program attached that drops or trims
incoming packets based on the filter program return value.
Rose requires data packets to have at least ROSE_MIN_LEN bytes. It
verifies this on arrival in rose_route_frame and unconditionally pulls
the bytes in rose_recvmsg. The filter can trim packets to below this
value in-between, causing pull to fail, leaving the partial header at
the time of skb_copy_datagram_msg.
Place a lower bound on the size to which sk_filter may trim packets
by introducing sk_filter_trim_cap and call this for rose packets.
CRs-Fixed: 1089895
Change-Id: Idc52737bc96097a9220dfe47bb76e94ff1026a05
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Git-commit: f4979fcea7fd36d8e2f556abef86f80e0d5af1ba
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[subashab@codeaurora.org: resolve trivial merge conflicts]
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Set the diag forward write buffers to busy state when glink
diag channel receives remote disconnected event.
Change-Id: I3c9422f3a790c0c1633ab64d4213a088faaeb9e5
Signed-off-by: Sreelakshmi Gownipalli <sgownipa@codeaurora.org>
Some smmu context banks are reserved for use by secure software. Do not
attempt to use the interrupts associated with those context banks.
Change-Id: I92e98ab46107fbcfd843898423b41716a204c2ae
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
Add support for compress capture in compress driver.
Add audio record support through compress driver.
CRs-fixed: 1072067
Change-Id: I7c6ab8bc0e88010eb221788cf8ce4c182e3128d9
Signed-off-by: Satish Babu Patakokila <sbpata@codeaurora.org>
PCIe MSI have to be contiguous by spec. Relocated
PCIe node so that it receives contiguous MSIs from
GIC driver.
Change-Id: Ia73ab1ba51df7b501d246bb45141018409496d01
Signed-off-by: Tony Truong <truong@codeaurora.org>
Add all SPIs for MSI, the base address, and the base SPI
to PCIe node to support and enable QGIC MSI on msmcobalt.
Change-Id: I1e74f1b03c3e15880efdac7ff07aca2f628de99d
Signed-off-by: Tony Truong <truong@codeaurora.org>
Add device tree support for msmcobalt interposer platform
for regulators of UFS.
Change-Id: I78d2c27743d30b90a96e3d8df60859f67db7ddb8
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
