The d6 and d7 is connected to PWM, we can use PWM to control it,
so switch to PWM leds.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Add backlight and panel nodes for the Harmony TFT LCD panel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
This ensures that the PMIC RTC provides the system time, rather than
the on-SoC RTC, which is not battery-backed.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Add ams AS3722 entry for gpio/pincontrol and regulators
to venice2 DT.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Compare the initial population of default pinmux configuration of Venice2
with the chrome branch and add/fix the missing configurations.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
- kirkwood
- use symbolic names for gpios and key inputs
- mvebu
- add the pxa nand controller to the ReadyNAS and A370-RD boards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ux36
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-3.14-3' of git://git.infradead.org/linux-mvebu into next/dt
From Jason Cooper:
mvebu DT changes for v3.14 (incr. #3)
- kirkwood
- use symbolic names for gpios and key inputs
- mvebu
- add the pxa nand controller to the ReadyNAS and A370-RD boards
* tag 'mvebu-dt-3.14-3' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Enable NAND controller in A370 Reference Design board
ARM: mvebu: Enable NAND controller in ReadyNAS 2120 .dts file
ARM: mvebu: Enable NAND controller in ReadyNAS 104 .dts file
ARM: mvebu: Enable NAND controller in ReadyNAS 102 .dts file
ARM: DT: Kirkwood: Use symbolic names from gpio.h
ARM: DT: Kirkwood: Use symbolic names from input.h
Signed-off-by: Kevin Hilman <khilman@linaro.org>
- Drop 0x prefixes
- Get rid of explicit GPIO management
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=QVcj
-----END PGP SIGNATURE-----
Merge tag 'nomadik-dt-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
From Linus Walleij:
Some Nomadik Device Tree updates for the v3.14 cycle:
- Drop 0x prefixes
- Get rid of explicit GPIO management
* tag 'nomadik-dt-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: nomadik: get rid of explicit ethernet GPIO management
ARM: nomadik: Remove '0x's from nomadik stn8815 DTS file
Now that the DTS file r8a7790-lager.dts can be used with board-lager.c
and board-lager-reference.c, proceed with removing
r8a7790-lager-reference.dts.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The external crystal frequency is 20MHz on the Koelsch board. Specify it
in the device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The external crystal frequency is 20MHz on the Lager board. Specify it
in the device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Copy the device nodes from Koelsch reference into the Koeslch device
tree file. This will allow us to use a single DTS file regarless of
kernel configuration. In case of legacy C board code the device nodes
may or may not be used, but in the multiplatform case all the DT device
nodes are used.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Copy the device nodes from Lager reference into the Lager device tree
file. This will allow us to use a single DTS file regarless of kernel
configuration. In case of legacy C board code the device nodes may or
may not be used, but in the multiplatform case all the DT device nodes
are used.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Declare all core clocks and DIV6 clocks, as well as all MSTP clocks
currently used by r8a7791 boards.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reference clocks using a "clocks" property in all nodes corresponding to
devices that require a clock.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Declare all core clocks and DIV6 clocks, as well as all MSTP clocks
currently used by r8a7790 boards.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The board had 4 buttons connected to GPIOs, add a corresponding
gpio-keys device.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Armadillo 800 EVA panel module has a backlight enable signal
connected to GPIO 61. Report this in the backlight DT node.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Commit 22ceeee16e ("pwm-backlight: Add
power supply support") added a mandatory power supply for the PWM
backlight. Add a fixed 5V regulator and reference it for the backlight
power supply.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Let the multiplatform Koelsch support boot with the legacy DTS for
Koelsch as well as the Koelsch reference DTS.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Let the multiplatform Lager support boot with the legacy DTS for Lager
as well as the Lager reference DTS.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Now that r8a7790 has CCF support remove the legacy Lager reference
Kconfig bits CONFIG_MACH_LAGER_REFERENCE for the non-multiplatform
case.
Starting from this commit Lager board support is always enabled via
CONFIG_MACH_LAGER, and CONFIG_ARCH_MULTIPLATFORM is used to select
between board-lager.c and board-lager-reference.c
The file board-lager-reference.c can no longer be used together with
the legacy sh-clk clock framework, instead CCF is used.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable multiplaform ARM architecture support for the Lager reference
board. Common clock framework initialization will be handled by the
rcar_gen2_init_timer() call, we just need to remove the legacy clock
code initialization.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The r8a7790.dtsi file has four sdhi nodes which the first two have the wrong
resource size for their register block. This causes the sh_modbile_sdhi driver
to fail to communicate with card at-all.
Change sdhi{0,1} node size from 0x100 to 0x200 to correct these nodes
as per Kuninori Morimoto's response to the original patch where all four
nodes where changed. sdhi{2,3} are the correct size.
This bug has been present since sdhi resources were added to the r8a7790 by
8c9b1aa418 ("ARM: shmobile: r8a7790: add MMCIF and SDHI DT
templates") in v3.11-rc2.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Tested-by: William Towle <william.towle@codethink.co.uk>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This adds support for CompuLab SBC-T3530, also known as cm-t3730:
http://compulab.co.il/products/sbcs/sbc-t3530/
It seems that with the sbc-3xxx mainboard is also used on
SBC-T3517 and SBC-T3730 with just a different CPU module:
http://compulab.co.il/products/sbcs/sbc-t3517/http://compulab.co.il/products/sbcs/sbc-t3730/
So let's add a common omap3-sb-t35.dtsi and then separate SoC
specific omap3-sbc-t3730.dts, omap3-sbc-t3530.dts and
omap3-sbc-t3517.dts.
I've tested this with SBC-T3730 as that's the only one I have.
At least serial, both Ethernet controllers, MMC, and wl12xx WLAN
work.
Note that WLAN seems to be different for SBC-T3530. And SBC-T3517
may need some changes for the EMAC Ethernet if that's used
instead of the smsc911x.
Cc: devicetree@vger.kernel.org
Cc: Mike Rapoport <mike@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This ensures that the PMIC RTC provides the system time, rather than
the on-SoC RTC, which is not battery-backed.
tegra124-venice2.dts isn't touched yet since we haven't added any off-
SoC RTC device to its device tree.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Enable Hisilicon Hi4511 development platform with device tree support.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
The SPI controllers on Tegra124 are compatible with those found on the
Tegra114 SoC.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
This pin needs to be configured in pull-down, non-tristate mode in order
for the backlight to work correctly.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Other boards use PULL_NONE for their debug UART pins, and without this
change, the board doesn't accept any serial input.
Don't set the I2S port pins to tristate mode, or no audio signal will
be sent out.
Fixes: 605ae5804385 ("ARM: tegra: add default pinctrl nodes for Venice2")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Add the default pinmux configuration for the Tegra124 based
Venice2 platform.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Set the parent of the regulators LDO2 to LDO9 according to the
schematic. Set the base voltage to 3.3V, there is only 3.3V on the
module itself.
Set the Core and CPU voltage to the specified voltages of 1.2V and
1.0V respectivly.
LDO6 should deliver 2.85V. The attached peripherals were not in
use so far.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Use Tegra pinconrol dt-binding macro to set the values of different pinmux
properties of Tegra30 platforms.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Use Tegra pinconrol dt-binding macro to set the values of different pinmux
properties of Tegra20 platforms.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Use Tegra pinconrol dt-binding macro to set the values of different pinmux
properties of Tegra114 platforms.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Use key code macros for all key code refernced for keys.
For tegra20-seaboard.dts and tegra20-harmony.dts:
The key comment for key (16th row and 1st column) is KEY_KPSLASH but
code is 0x004e which is the key code for KEY_KPPLUS. As there other
key exist with KY_KPPLUS, I am assuming key code is wrong and comment
is fine. With this assumption, I am keeping the key code as KEY_KPSLASH.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Subsequent patches will need to reference a PWM channel for backlight
support, so enable the PWM device and assign a label to it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The PWM controller on Tegra124 is the same as the one on earlier SoC
generations.
Signed-off-by: Thierry Reding <treding@nvidia.com>
[swarren, added reset properties]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
