This patch replaces a condition check for time elapsed with a
simple time_after macro
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch addresses a spatch warning on assigning a negative
value to a unsigned integer.Similar patch has been submitted by
Larry Finger earlier to silence the same spatch warning in another
file.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Errors found by checkpatch.pl.
ERROR: code indent should use tabs where possible
/drivers/staging/comedi/drivers/das16m1.c:49
/drivers/staging/comedi/drivers/das16m1.c:50
Signed-off-by: Jaime Arrocha <jarr@kerneldev.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the preferred block comment style for the copyright and driver
description header comments.
Signed-off-by: Arno Tiemersma <arno.tiemersma@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the `PCI_DEVICE_SUB()` macro in the initializer of the PCI module
device table `gsc_hpdi_pci_table[]`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix all the checkpatch issues "CHECK: Prefer using the BIT macro".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch issue: "CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt". `udelay()` is only called once
from a place where sleeping is allowed. Replace it with a call to
`usleep_range()` with a reasonable upper limit.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code for determining which board type matches the PCI device ID is
over-the-top since only a single board type is supported. Also, the
method it uses match the PCI device ID to a board type is a little
antiquated. Most comedi drivers for PCI devices use `driver_data` from
the probed PCI device as an index into an array of supported board
types, but "gsc_hpdi" uses a `for` loop to find an element of
`hpdi_boards[]` that matches the PCI device. The only thing in
`hpdi_boards[]` not used for finding a matching PCI device is the `name`
member of `struct hpdi_board` which points to a string literal and ends
up getting assigned to `dev->board_name`.
Get rid of the multiple board type support, and set `dev->board_name` to
point to the original string literal pointed to by
`hpdi_boards[0].name`. This string is visible to userspace.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the usual style for block comments. Squash double spaces after
comment opening sequence. Move some comments after opening braces to
following line.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This subsystem isn't used anymore, and the hardware isn't around. It's
been in staging for a while, and it's time for it to now be removed.
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) Move the enum's to a better location and tidy up the whitespace.
2) Tidy up the defines used for some array sizes in the private data.
3) Add comments for the spinlock_t variables in the private data.
4) Move the forward declaration to the end of the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. For aesthetics, convert the enum into defines.
Use the BIT() macro to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, convert the enum into defines. Use the BIT() macro
to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, convert the enum into defines and the inline functions
into macros. Use the BIT() macro to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move this inline helper function from ni_stc.h. It does not need to be
exposed outside of this file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. Convert the inline helper functions into macros.
Tidy up the driver code to use the new macros. For consistency, make
the ni_set_gpct_dma_channel() helper follow the same style as the
ni_set_ai_dma_channel() and ni_set_ao_dma_channel() helpers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase and convert the enum into macros.
Tidy up the driver code to use the new macros.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gpct_index will always be 0 or 1. Remove the unnecessary BUG_ON()
checks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase and convert the defines into a macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. Use the BIT() macro to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. Use the BIT() macro to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. Use the BIT() macro to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only the 'Port_A' define is used. Rename the CamelCase and remove the
unused defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. Use the BIT() macro to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. Use the BIT() macro to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. Use the BIT() macro to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bit defines in this header for the GPCT registers are not used. The ones
in ni_tio_internal.h are used instead. Remove them from this header.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. Use the BIT() macro to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. Use the BIT() macro to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase and define the G0 and G1 registers to add clarity
to the mio_regmap tables.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase and define the G0 and G1 registers to add clarity
to the mio_regmap tables.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. Use the BIT() marco to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. Use the BIT() marco to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. Use the BIT() marco to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase. Convert the inline helper function into a macro and
use the BIT() marco to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Write_Strobe_*_Register defines are noy used. Instead the more
descriptive Configuration_Memory_Clear, ADC_FIFO_Clear and DAC_FIFO_Clear
defines are used. Remove the unused defines and rename the CamelCase.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
