Update the defconfig to enable the CEU camera.
It appears that it was previously enabled but an
update is required for Kconfig changes.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The gpio controller on kirkwood can provide interrupts but is missing
the #interrupt-cells property. This patch just adds it to both gpio
controllers.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The cam_mclk clock is generated through the following clocks chain:
dpll4 -> dpll4_m5 -> dpll4_m5x2 -> cam_mclk
As dpll4_m5 and dpll4_m5x2 do not driver any clock other than cam_mclk,
back-propagate the cam_clk rate changes up to dpll4_m5.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Tested-by: Sakari Ailus <sakari.ailus@iki.fi>
- A build fix for recently merged omap DRM changes
- Regression fixes from the common clock framework conversion
for omap4 audio and omap2 reboot
- Regression fix for pandaboard WLAN control UART muxing caused by
u-boot only muxing essential pins nowadays
- Timer iteration fix for CONFIG_OF_DYNAMIC
- A section mismatch fix for ocp2scp init
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=GTdk
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.8-rc4/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
Minimal omap fixes for the -rc series:
- A build fix for recently merged omap DRM changes
- Regression fixes from the common clock framework conversion
for omap4 audio and omap2 reboot
- Regression fix for pandaboard WLAN control UART muxing caused by
u-boot only muxing essential pins nowadays
- Timer iteration fix for CONFIG_OF_DYNAMIC
- A section mismatch fix for ocp2scp init
* tag 'omap-for-v3.8-rc4/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (306 commits)
ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport
ARM: OMAP2+: DT node Timer iteration fix
ARM: OMAP2+: Fix section warning for omap_init_ocp2scp()
ARM: OMAP2+: fix build break for omapdrm
ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls
ARM: OMAP4: hwmod_data: Correct IDLEMODE for McPDM
ARM: OMAP4: clock data: Lock ABE DPLL on all revisions
+ Linux 3.8-rc4
Signed-off-by: Olof Johansson <olof@lixom.net>
The Allwinner SoCs have an IP module that handle both the muxing and the
GPIOs.
This IP has 8 banks of 32 bits, with a number of pins actually useful
for each of these banks varying from one to another, and depending on
the SoC used on the board.
This driver only implements the pinctrl part, the gpio part will come
eventually.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Introduce an IP reset API for use on DaVinci SoC.
There is no existing "reset" framework support for SoC devices.
The remoteproc driver needs explicit control of the DSP's reset line.
To support this, a new DaVinci specific API is added.
This private API will disappear with DT migration. Some discussion
regarding a proposed DT "reset" binding is here:
https://patchwork.kernel.org/patch/1635051/
Modify davinci_clk_init() to set clk "reset" function for clocks
that indicate PSC_LRST support. Also fix indentation issue with
function opening curly brace.
Signed-off-by: Robert Tivy <rtivy@ti.com>
[nsekhar@ti.com: rename davinci_psc_config_reset() to davinci_psc_reset()]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
prima2 and marco has different memory base, the old code will
fail if we enable DEBUG_LL in marco.
this patch adds two debuf port, while debugging, we select one
of PRIMA2 and MARCO debug ports, in the products, we disable
DEBUG_LL.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
this patch adds tick timer, smp entries and generic DT machine
for SiRFmarco dual-core SMP chips.
with the added marco, we change the defconfig, using the same
defconfig, we get a zImage which can work on both prima2 and
marco.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Cc: Mark Rutland <mark.rutland@arm.com>
in Marco, we will use GIC. this patch prepares the handle_irq for prima2
to avoid the compiling errors since we want only one defconfig and zImage
for both prima2 and marco that means we will need handle_irq for both.
Signed-off-by: Baohua Song <Baohua.Song@csr.com>
marco has SET/CLEAR registers pair for rstc to avoid read-modify-write,
this patch detects the mach typer and access registers based on SoC.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Marco timer has different timer IP with prima2, so rename the current timer
to timer-prima2 so that we can add timer-marco.
at the same time, if we don't find prima2 timer node in dt, don't panic the
system as we will make prima2 and marco use same kernel image.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
prima2 and marco have diffetent l2 cache configuration, so
we initialize l2x0 cache based on dtb given to kernel.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
prima2 and marco have different memory base address. prima2
begins from 0 and marco begins from 0x40000000.
This patch enables AUTO_ZRELADDR so that kernel can detect
the physical address automatically.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
CC: Mark Rutland <mark.rutland@arm.com>
SiRFmarco is a dual-core cortex-a9 SMP SoC from CSR. this patch
adds the .dtsi and a basic evb board .dts for it.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
The pin in question is muxed between GPIO7 and PWM1. For backlight control
there is a custom code in board-zoom-display to control the backlight.
No need to request the GPIO7 - which was failing since the way it is
requested no longer valid: twl's gpio range is allocated dynamically.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
With the PWM backed driver the PMU_STAT led's brighness can be controlled.
This needs the new drivers for the TWL PWM/LED to work.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
New PWM drivers are being prepared for twl series which will enable the use
of all PWMs (PWMs and LEDs).
They are implemented as generic PWM drivers to be able to use them for different
purposes.
The current platform code was broken: the leds_pwm driver was not able to pick
up the PWM since the pwm_id was incorrect.
With the other patches we will be able to control the followings:
LCD backlight via pwm-backlight driver
Keypad leds via leds_pwm driver as normal LED
Charging indicator via leds_pwm driver as normal LED
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Boards with special audio routing can pass a custom omap_tw4030_pdata to the
audio machine driver.
At the same time update the board files using the same audio driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Select the most commonly used audio configuration on boards with twl4030
audio:
Headset, Handsfree output and Line in input
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
The HS extmute is not used on Zoom2 boards. Furthermore the GPIO153 is used
as IRQ for the TSC2004 touchscreen controller - for which we do not have
driver upstream, yet.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
This contains a single compilation fix for the CODA driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=7H1R
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes
From Sascha Hauer:
ARM i.MX fixes for -rc.
This contains a single compilation fix for the CODA driver.
* tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6:
[media] coda: Fix build due to iram.h rename
In drivers/gpio/Kcong, ARCH_REQUIRE_GPIOLIB selects GPIOLIB which in
turn selects GENERIC_GPIO. So GENERIC_GPIO will be selected
automatically for those platforms that select ARCH_REQUIRE_GPIOLIB.
Remove the redundant 'select GENERIC_GPIO' for platforms that already
select ARCH_REQUIRE_GPIOLIB at either mach or plat level.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds a soc dtsi for the Wondermedia WM8850.
A board dts file is also included for the W70v2 tablet, with support
for all the drivers currently in mainline.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch moves mach-s3c2440/pll into mach-s3c24xx/
and removes arch/arm/mach-s3c2440/ directory in kernel.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch moves mach-s3c2412/cpufreq driver into mach-s3c24xx/
and removes arch/arm/mach-s3c2412/ directory in kernel.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch moves mach-s3c2410/pll into mach-s3c24xx/
and removes arch/arm/mach-s3c2410/ directory in kernel.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Basically, the cpufreq driver for s3c2410 should be implemented into
drivers/cpufreq, but we don't need to keep the mach-s3c2410 directory.
So this patch moves current cpufreq driver into mach-s3c24xx/.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Ben Dooks <ben-linux@fluff.org>
CC: Kukjin Kim <kgene.kim@samsung.com>
CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for specifying clock information for the uart clk via the
device tree. This eliminates the need to hardcode rates in the device
tree.
Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the UART2 muxing data to the board file (this used to be,
erroneously, done in the bootloader).
Cc: stable <stable@vger.kernel.org> [3.7]
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The iterator correctly handles of_node_put() calls.
Remove it before continue'ing the loop.
Without this patch you get the following with
CONFIG_OF_DYNAMIC set:
ERROR: Bad of_node_put() on /ocp/timer@44e31000!
[<c001329c>] (unwind_backtrace+0x0/0xe0) from [<c03dd8f0>] (of_node_release+0x2c/0xa0)!
[<c03dd8f0>] (of_node_release+0x2c/0xa0) from [<c03ddea0>] (of_find_matching_node_and_match+0x78/0x90)!
[<c03ddea0>] (of_find_matching_node_and_match+0x78/0x90) from [<c06d349c>] (omap_get_timer_dt+0x78/0x90)!
[<c06d349c>] (omap_get_timer_dt+0x78/0x90) from [<c06d3664>] (omap_dm_timer_init_one.clone.2+0x34/0x2bc)!
[<c06d3664>] (omap_dm_timer_init_one.clone.2+0x34/0x2bc) from [<c06d3a2c>] (omap2_gptimer_clocksource_init.clone.4+0x24/0xa8)!
[<c06d3a2c>] (omap2_gptimer_clocksource_init.clone.4+0x24/0xa8) from [<c06cca58>] (time_init+0x20/0x30)!
[<c06cca58>] (time_init+0x20/0x30) from [<c06c9690>] (start_kernel+0x1a8/0x2fc)!
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Acked-by: Jon Hunter <jon-hunter@ti.com>
[tony@atomide.com: updated description per Jon]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Otherwise we will get:
WARNING: vmlinux.o(.text+0x1d4f0): Section mismatch in reference from the
function omap_init_ocp2scp() to the function .init.text:omap_device_build()
The function omap_init_ocp2scp() references
the function __init omap_device_build().
This is often because omap_init_ocp2scp lacks a __init
annotation or the annotation of omap_device_build is wrong.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add NAND driver DT node and related pinctrl DT data to export NAND
functionality on da850 evm.
Signed-off-by: Kumar, Anil <anilkumar.v@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
For DT, DaVinci platform can use pinctrl-single driver for handling
padconf registers.
Enable PINCTRL Kconfig for MACH_DA8XX_DT platform. Add required
pinctrl DT entries in da850 dts file.
Test procedure
1)Populate DT file with NAND node information.
2)Populate board DT file with pinmux information for NAND.
3)Boot and confirm NAND is detected by the kernel.
4)cat /proc/mtd to show partitions.
Signed-off-by: Kumar, Anil <anilkumar.v@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Fix up all callers as they were before, with make one change: an
unsigned module taints the kernel, but doesn't turn off lockdep.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Commit 8fb54284ba {ARM: mm: Add strongly ordered descriptor support}
added XN flag at section level but missed it at PTE level.
Fix it by adding the L_PTE_XN to MT_MEMORY_SO PTE descriptor.
Reported-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
