Add memory-hotplug support for ARM64 platform.
This requires addition of
ARCH_ENABLE_MEMORY_HOTPLUG and ARCH_ENABLE_MEMORY_HOTREMOVE config options.
MEMORY_PROBE config option is added to support
/sys/devices/system/memory/probe functionality.
In addition architecture specific arch_add_memory and
arch_remove memory management functions are added.
Change-Id: I1fc4e8c93cfe1b9722b2fc8d811390e6cdfa7995
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Patch-mainline: linux-kernel @ 11 Apr 2017, 18:24
Signed-off-by: Srivatsa Vaddagiri <vatsa@codeaurora.org>
enable PM config to support gvm suspend and resume.
Change-Id: I5f71add6d2c5ac0fb1fc7ea98d13dc256f6e4d5a
Signed-off-by: Yimin Peng <yiminp@codeaurora.org>
Currently the teardown sequence in the DRM HDMI driver is
incorrect and it places the HDMI controller in an incorrect
state during cable unplug OR device teardown.
Fix the teardown sequence and follow the hardware programming
sequence correctly to avoid artifacts.
Change-Id: Ifb9ec303fa710409087a74c03435c83823d02763
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
As per the hardware programming sequence, HDCP authentication
process must start after turning ON the timing engine and the
authentication process should be stopped before turning OFF
the timing engine.
Implement this sequence during the HDMI turn OFF sequence.
Also, make sure to wait for one frame before disabling the DDC
while turning OFF the HDCP. This is required to make sure we
receive the HDCP encryption disabled interrupt before disabling
the HW.
Change-Id: I3174f51fe1b6ab578db2d38caaf761444e6ebd8f
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
When getting string from userspace by simple_write_to_buffer
in ufs_qcom_dbg_testbus_cfg_write() function, null byte may
be written out of bounds of configuration buffer if return
value is same as size of buffer, causing off-by-one bug.
This change passes correct available size of configuration
buffer to simple_write_to_buffer function.
Change-Id: If6085e806aa34622a9a57b02f563869c51011d2f
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
This reverts commit 3375a292ea.
Need to change the solution and re-implement this feature.
Change-Id: Iabd38bd5c0c062590215c3f22e9383853efa889c
Signed-off-by: Andy Sun <bins@codeaurora.org>
For modem restart and device power off cases, there's no
need to remove MSA0 permission and collect ramdump as these
are normal behavior. Hence only collecting ramdump when
modem is crashed.
CRs-Fixed: 2141678
Change-Id: I42b44da3f08e62c8e375ae1749563d918e68be9d
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
When SSR happending during WLAN interface up, a deadlock will happen
in many places where it waits for FW response. When wlan module starts,
it will hold a rtnl_lock and wait for FW response. If SSR happened at
this point, it will send ssr notification to all the registed modules
one by one. It will send notification to IPA first, which will also
tried to get a hold of rtnl_lock. Since ssr notification is synchronized,
IPA won't be able to return because of failing to acquire the lock and
wlan driver won't release the rtnl_lock until it timeout and crash.
Only graceful to avoid this deadlock is to get early modem
crash notification from platform via a path which does not acquire
RTNL lock and this way once driver has received early crash
notification it can reject interface up.
Modem notification comes to icnss before IPA, hence send
early crash notification in modem SSR handler so that wlan driver
can release RTNL lock as soon as possible.
CRs-Fixed: 2141970
Change-Id: If77c54a2a39ce5cf0e129eb5c6599cd3fd722886
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Currently when pd is disabled, we do not allow hvdcp. To fix that
once hvdcp timeout happens and if pd is disabled, force a pd_active
= 0. This will cause us to run legacy workaround and rerun apsd if
the charger was detected as hvdcp.
Importantly, once legacy bit workaround is run, wait 400mS for
typeC to debounce. Currently we wait for 100mS only and that
causes a removal detection since the CC lines are not settled within
100mS.
Also it may take up to 650mS for the vbus to drop once CC lines are
floated during the workaround. The current wait is just 500mS,
bump it up to a 1 second.
Change-Id: I17a7341e96d6efccde6270bc69d79c3f215b83e4
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Add MODEL_NAME property in parallel psy to expose the model
information of parallel chip.
Change-Id: Ib02fa449696e52dc9e9f4ad7ee0b04e841129b95
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
According to the databook ep0 should be in setup
phase during reset. If host issues reset between
control transfers, ep0 will be in an invalid state.
Fix this my issuing stall and restart on ep0 if it
is not in setup phase.
CRs-Fixed: 2136658
Change-Id: I6dc20c2735a6ce772533ccb5b63ba5d1b01f89d7
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
If it failed to get ba device, return NULL in msm_ba_open() to
avoid system crash on some specific board without adv7481 chip.
Change-Id: I5a3af414a683d852027b84b9ba0d64e2ee450e61
Signed-off-by: Jingtao Chen <jingtaoc@codeaurora.org>
Clear the deep color bits in the HDMI controller in case
the mode does not need OR support deep color.
Change-Id: I77a5cd74bc90c249d8902437a7b87a07259a2c35
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Restrict printing of kernel virtual addresses in SPS driver.
In debug code, %p is used to print virtual addresses of
kernel objects, which can be exploited by attackers. It is
replaced with %pK, which hides these values if kptr_restrict
is set (default on Android).
Change-Id: I57585fa655abc01b2e8d694c8f31b7617bbf4ec7
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Correction in the value being passed to the float_voltage_set method
in the smb1351 parallel_set_property function. The value being passed
is in uV range whereas the expected value lies in the mV range.
Change-Id: If04468062f973e1f102fd2f943271b2a133e3d8b
Signed-off-by: Umang Agrawal <uagrawal@codeaurora.org>
Check the credit update flag has enabled for the pipe
before setting the flag for credit report update request
on the wcn3990 WLAN module.
CRs-Fixed: 2141924
Change-Id: Ic628fa49934c110b7abccefb45a2a354dc462791
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
(from https://patchwork.kernel.org/patch/10058587/)
proc->files cleanup is initiated by binder_vma_close. Therefore
a reference on the binder_proc is not enough to prevent the
files_struct from being released while the binder_proc still has
a reference. This can lead to an attempt to dereference the
stale pointer obtained from proc->files prior to proc->files
cleanup. This has been seen once in task_get_unused_fd_flags()
when __alloc_fd() is called with a stale "files".
The fix is to always use get_files_struct() to obtain struct_files
so that the refcount on the files_struct is used to prevent
a premature free. proc->files is removed since we get it every
time.
Bug: 69164715
Change-Id: I6431027d3d569e76913935c21885201505627982
Signed-off-by: Todd Kjos <tkjos@google.com>
Git-commit: 1d6b43334b45144beb0dc8236f9eb3b6cf3b2995
Git-repo: https://android.googlesource.com/kernel/common
Signed-off-by: Kyle Yan <kyan@codeaurora.org>
When doing WLAN SSR tests on Rome PCIe platform, system hang
is observed. After debugging, setting D3hot to PCIe link when
suspending leads to the hang.
Setting D3hot is a new change, which is added for Napier platform.
But this code path shares with legacy Rome platform. In previous
implementations for Rome PCIe platforms, setting D3hot to link
is not needed.
Fix is to set D3hot for Napier specific platforms.
Change-Id: Ia6bcb1b898204c0a8fd63355dd1f0808021182c4
CRs-Fixed: 2145090
Signed-off-by: Jia Ding <jiad@codeaurora.org>
It is required to pass usb-audio-qmi-dev device node from dtsi to
provide StreamID and interrupt number info so that this info will be
used for enabling for USB audio tunneling mode over USB. Hence add
the node to enable audio tunneling mode for msm8996.
Change-Id: Iba4d18ff0495460f5d488604f31c4d5209252940
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Fix the divider programming of DisplayPort PLL with the correct
value. Without this, display doesn't up fine with certain
resolutions on some sinks when link rate is 5.4 GHz.
Change-Id: I7c5a452a9df757240a1c6c3d371bd46a16f98efd
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
msm8953 uses a new version of csid. Adding new
configuration file and making necessary driver changes.
Change-Id: I5c0ce7f43a4ccd55bd18461bc910e4dcb0c23bb0
Signed-off-by: Shankar Ravi <rshankar@codeaurora.org>
If return is inside the if condition, rc value is returned
only for that case. Hence shifting the return rc statement
outside the if loop, to return the value of rc for all cases.
Change-Id: I2f96cd0d301f580c0e7019746bade4e125661a36
CRs-Fixed: 1076948
Signed-off-by: Samyukta Mogily <smogily@codeaurora.org>
