-----BEGIN PGP SIGNATURE-----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=2RHb
-----END PGP SIGNATURE-----
Merge 4.4.157 into android-4.4
Changes in 4.4.157
i2c: xiic: Make the start and the byte count write atomic
i2c: i801: fix DNV's SMBCTRL register offset
ALSA: hda - Fix cancel_work_sync() stall from jackpoll work
cfq: Give a chance for arming slice idle timer in case of group_idle
kthread: Fix use-after-free if kthread fork fails
kthread: fix boot hang (regression) on MIPS/OpenRISC
staging: rt5208: Fix a sleep-in-atomic bug in xd_copy_page
staging/rts5208: Fix read overflow in memcpy
block,blkcg: use __GFP_NOWARN for best-effort allocations in blkcg
locking/rwsem-xadd: Fix missed wakeup due to reordering of load
selinux: use GFP_NOWAIT in the AVC kmem_caches
locking/osq_lock: Fix osq_lock queue corruption
ARC: [plat-axs*]: Enable SWAP
misc: mic: SCIF Fix scif_get_new_port() error handling
ethtool: Remove trailing semicolon for static inline
Bluetooth: h5: Fix missing dependency on BT_HCIUART_SERDEV
gpio: tegra: Move driver registration to subsys_init level
scsi: target: fix __transport_register_session locking
md/raid5: fix data corruption of replacements after originals dropped
misc: ti-st: Fix memory leak in the error path of probe()
uio: potential double frees if __uio_register_device() fails
tty: rocket: Fix possible buffer overwrite on register_PCI
f2fs: do not set free of current section
perf tools: Allow overriding MAX_NR_CPUS at compile time
NFSv4.0 fix client reference leak in callback
macintosh/via-pmu: Add missing mmio accessors
ath10k: prevent active scans on potential unusable channels
MIPS: Fix ISA virt/bus conversion for non-zero PHYS_OFFSET
ata: libahci: Correct setting of DEVSLP register
scsi: 3ware: fix return 0 on the error path of probe
ath10k: disable bundle mgmt tx completion event support
Bluetooth: hidp: Fix handling of strncpy for hid->name information
x86/mm: Remove in_nmi() warning from vmalloc_fault()
gpio: ml-ioh: Fix buffer underwrite on probe error path
net: mvneta: fix mtu change on port without link
MIPS: Octeon: add missing of_node_put()
net: dcb: For wild-card lookups, use priority -1, not 0
Input: atmel_mxt_ts - only use first T9 instance
partitions/aix: append null character to print data from disk
partitions/aix: fix usage of uninitialized lv_info and lvname structures
iommu/ipmmu-vmsa: Fix allocation in atomic context
mfd: ti_am335x_tscadc: Fix struct clk memory leak
f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize
MIPS: WARN_ON invalid DMA cache maintenance, not BUG_ON
RDMA/cma: Do not ignore net namespace for unbound cm_id
xhci: Fix use-after-free in xhci_free_virt_device
vmw_balloon: include asm/io.h
netfilter: x_tables: avoid stack-out-of-bounds read in xt_copy_counters_from_user
drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac config
net: ethernet: ti: cpsw: fix mdio device reference leak
ethernet: ti: davinci_emac: add missing of_node_put after calling of_parse_phandle
crypto: vmx - Fix sleep-in-atomic bugs
mtd: ubi: wl: Fix error return code in ubi_wl_init()
autofs: fix autofs_sbi() does not check super block type
x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+
mm: get rid of vmacache_flush_all() entirely
Linux 4.4.157
Change-Id: I30fc9e099e9065aff5e53c648d822c405525bb07
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 7a9cdebdcc17e426fb5287e4a82db1dfe86339b2 upstream.
Jann Horn points out that the vmacache_flush_all() function is not only
potentially expensive, it's buggy too. It also happens to be entirely
unnecessary, because the sequence number overflow case can be avoided by
simply making the sequence number be 64-bit. That doesn't even grow the
data structures in question, because the other adjacent fields are
already 64-bit.
So simplify the whole thing by just making the sequence number overflow
case go away entirely, which gets rid of all the complications and makes
the code faster too. Win-win.
[ Oleg Nesterov points out that the VMACACHE_FULL_FLUSHES statistics
also just goes away entirely with this ]
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[upstream cc51e5428ea54f575d49cfcede1d4cb3a72b4ec4 for 4.4.
Note there might be still a trivial conflict with the backport
for b0a182f875689647b014bc01d36b340217792852, but should
be easy to resolve]
On Nehalem and newer core CPUs the CPU cache internally uses 44 bits
physical address space. The L1TF workaround is limited by this internal
cache address width, and needs to have one bit free there for the
mitigation to work.
Older client systems report only 36bit physical address space so the range
check decides that L1TF is not mitigated for a 36bit phys/32GB system with
some memory holes.
But since these actually have the larger internal cache width this warning
is bogus because it would only really be needed if the system had more than
43bits of memory.
Add a new internal x86_cache_bits field. Normally it is the same as the
physical bits field reported by CPUID, but for Nehalem and newerforce it to
be at least 44bits.
Change the L1TF memory size warning to use the new cache_bits field to
avoid bogus warnings and remove the bogus comment about memory size.
Fixes: 17dbca119312 ("x86/speculation/l1tf: Add sysfs reporting for l1tf")
Reported-by: George Anchev <studio@anchev.net>
Reported-by: Christopher Snowhill <kode54@gmail.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Michael Hocko <mhocko@suse.com>
Cc: vbabka@suse.cz
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180824170351.34874-1-andi@firstfloor.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0633da48f0793aeba27f82d30605624416723a91 upstream.
autofs_sbi() does not check the superblock magic number to verify it has
been given an autofs super block.
Backport Note: autofs4 has been renamed to autofs upstream. As a result
the upstream patch does not apply cleanly onto 4.14.y.
Link: http://lkml.kernel.org/r/153475422934.17131.7563724552005298277.stgit@pluto.themaw.net
Reported-by: <syzbot+87c3c541582e56943277@syzkaller.appspotmail.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7233982ade15eeac05c6f351e8d347406e6bcd2f upstream.
Fix to return error code -ENOMEM from the kmem_cache_alloc() error
handling case instead of 0, as done elsewhere in this function.
Fixes: f78e5623f45b ("ubi: fastmap: Erase outdated anchor PEBs during
attach")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0522236d4f9c5ab2e79889cb020d1acbe5da416e upstream.
This patch fixes sleep-in-atomic bugs in AES-CBC and AES-XTS VMX
implementations. The problem is that the blkcipher_* functions should
not be called in atomic context.
The bugs can be reproduced via the AF_ALG interface by trying to
encrypt/decrypt sufficiently large buffers (at least 64 KiB) using the
VMX implementations of 'cbc(aes)' or 'xts(aes)'. Such operations then
trigger BUG in crypto_yield():
[ 891.863680] BUG: sleeping function called from invalid context at include/crypto/algapi.h:424
[ 891.864622] in_atomic(): 1, irqs_disabled(): 0, pid: 12347, name: kcapi-enc
[ 891.864739] 1 lock held by kcapi-enc/12347:
[ 891.864811] #0: 00000000f5d42c46 (sk_lock-AF_ALG){+.+.}, at: skcipher_recvmsg+0x50/0x530
[ 891.865076] CPU: 5 PID: 12347 Comm: kcapi-enc Not tainted 4.19.0-0.rc0.git3.1.fc30.ppc64le #1
[ 891.865251] Call Trace:
[ 891.865340] [c0000003387578c0] [c000000000d67ea4] dump_stack+0xe8/0x164 (unreliable)
[ 891.865511] [c000000338757910] [c000000000172a58] ___might_sleep+0x2f8/0x310
[ 891.865679] [c000000338757990] [c0000000006bff74] blkcipher_walk_done+0x374/0x4a0
[ 891.865825] [c0000003387579e0] [d000000007e73e70] p8_aes_cbc_encrypt+0x1c8/0x260 [vmx_crypto]
[ 891.865993] [c000000338757ad0] [c0000000006c0ee0] skcipher_encrypt_blkcipher+0x60/0x80
[ 891.866128] [c000000338757b10] [c0000000006ec504] skcipher_recvmsg+0x424/0x530
[ 891.866283] [c000000338757bd0] [c000000000b00654] sock_recvmsg+0x74/0xa0
[ 891.866403] [c000000338757c10] [c000000000b00f64] ___sys_recvmsg+0xf4/0x2f0
[ 891.866515] [c000000338757d90] [c000000000b02bb8] __sys_recvmsg+0x68/0xe0
[ 891.866631] [c000000338757e30] [c00000000000bbe4] system_call+0x5c/0x70
Fixes: 8c755ace35 ("crypto: vmx - Adding CBC routines for VMX module")
Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5817f977527e5cdbea9ca56d2b95824f59c8747d upstream.
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86e1d5adcef961eb383ce4eacbe0ef22f06e2045 upstream.
Make sure to drop the reference taken by of_find_device_by_node() when
looking up an mdio device from a phy_id property during probe.
Fixes: 549985ee9c ("cpsw: simplify the setup of the register
pointers")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 552165bcf7060b998b4a9b5b86110b6a5e04dfd9 upstream.
Commit 9e42f71526 ("drivers: net: cpsw: add
phy-handle parsing") saved the "phy-handle" phandle into a new cpsw_priv
field. However, phy connections are per-slave, so the phy_node field should
be in cpsw_slave_data rather than cpsw_priv.
This would go unnoticed in a single emac configuration. But in dual_emac
mode, the last "phy-handle" property parsed for either slave would be used
by both of them, causing them both to refer to the same phy_device.
Fixes: 9e42f71526 ("drivers: net: cpsw: add phy-handle parsing")
Signed-off-by: David Rivshin <drivshin@allworx.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e466af75c074e76107ae1cd5a2823e9c61894ffb upstream.
syzkaller reports an out of bound read in strlcpy(), triggered
by xt_copy_counters_from_user()
Fix this by using memcpy(), then forcing a zero byte at the last position
of the destination, as Florian did for the non COMPAT code.
Fixes: d7591f0c41ce ("netfilter: x_tables: introduce and use xt_copy_counters_from_user")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44a182b9d17765514fa2b1cc911e4e65134eef93 upstream.
KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e
where xhci_free_virt_device() sets slot id to 0 if udev exists:
if (dev->udev && dev->udev->slot_id)
dev->udev->slot_id = 0;
dev->udev will be true even if udev is freed because dev->udev is
not set to NULL.
set dev->udev pointer to NULL in xhci_free_dev()
The original patch went to stable so this fix needs to be applied
there as well.
Fixes: a400efe455f7 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot")
Cc: <stable@vger.kernel.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 643d213a9a034fa04f5575a40dfc8548e33ce04f ]
Currently if the cm_id is not bound to any netdevice, than for such cm_id,
net namespace is ignored; which is incorrect.
Regardless of cm_id bound to a netdevice or not, net namespace must
match. When a cm_id is bound to a netdevice, in such case net namespace
and netdevice both must match.
Fixes: 4c21b5bcef ("IB/cma: Add net_dev and private data checks to RDMA CM")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d4da0e97baea8768b3d66ccef3967bebd50dfc3b ]
If a driver causes DMA cache maintenance with a zero length then we
currently BUG and kill the kernel. As this is a scenario that we may
well be able to recover from, WARN & return in the condition instead.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/14623/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 46583e8c48c5a094ba28060615b3a7c8c576690f ]
When attaching a device to an IOMMU group with
CONFIG_DEBUG_ATOMIC_SLEEP=y:
BUG: sleeping function called from invalid context at mm/slab.h:421
in_atomic(): 1, irqs_disabled(): 128, pid: 61, name: kworker/1:1
...
Call trace:
...
arm_lpae_alloc_pgtable+0x114/0x184
arm_64_lpae_alloc_pgtable_s1+0x2c/0x128
arm_32_lpae_alloc_pgtable_s1+0x40/0x6c
alloc_io_pgtable_ops+0x60/0x88
ipmmu_attach_device+0x140/0x334
ipmmu_attach_device() takes a spinlock, while arm_lpae_alloc_pgtable()
allocates memory using GFP_KERNEL. Originally, the ipmmu-vmsa driver
had its own custom page table allocation implementation using
GFP_ATOMIC, hence the spinlock was fine.
Fix this by replacing the spinlock by a mutex, like the arm-smmu driver
does.
Fixes: f20ed39f53 ("iommu/ipmmu-vmsa: Use the ARM LPAE page table allocator")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 14cb2c8a6c5dae57ee3e2da10fa3db2b9087e39e ]
The if-block that sets a successful return value in aix_partition()
uses 'lvip[].pps_per_lv' and 'n[].name' potentially uninitialized.
For example, if 'numlvs' is zero or alloc_lvn() fails, neither is
initialized, but are used anyway if alloc_pvd() succeeds after it.
So, make the alloc_pvd() call conditional on their initialization.
This has been hit when attaching an apparently corrupted/stressed
AIX LUN, misleading the kernel to pr_warn() invalid data and hang.
[...] partition (null) (11 pp's found) is not contiguous
[...] partition (null) (2 pp's found) is not contiguous
[...] partition (null) (3 pp's found) is not contiguous
[...] partition (null) (64 pp's found) is not contiguous
Fixes: 6ceea22bbb ("partitions: add aix lvm partition support files")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d43fdae7bac2def8c4314b5a49822cb7f08a45f1 ]
Even if properly initialized, the lvname array (i.e., strings)
is read from disk, and might contain corrupt data (e.g., lack
the null terminating character for strings).
So, make sure the partition name string used in pr_warn() has
the null terminating character.
Fixes: 6ceea22bbb ("partitions: add aix lvm partition support files")
Suggested-by: Daniel J. Axtens <daniel.axtens@canonical.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 36f5d9ef26e52edff046b4b097855db89bf0cd4a ]
The driver only registers one input device, which uses the screen
parameters from the first T9 instance. The first T63 instance also uses
those parameters.
It is incorrect to send input reports from the second instances of these
objects if they are enabled: the input scaling will be wrong and the
positions will be mashed together.
This also causes problems on Android if the number of slots exceeds 32.
In the future, this could be handled by looking for enabled touch object
instances and creating an input device for each one.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 08193d1a893c802c4b807e4d522865061f4e9f4f ]
The function dcb_app_lookup walks the list of specified DCB APP entries,
looking for one that matches a given criteria: ifindex, selector,
protocol ID and optionally also priority. The "don't care" value for
priority is set to 0, because that priority has not been allowed under
CEE regime, which predates the IEEE standardization.
Under IEEE, 0 is a valid priority number. But because dcb_app_lookup
considers zero a wild card, attempts to add an APP entry with priority 0
fail when other entries exist for a given ifindex / selector / PID
triplet.
Fix by changing the wild-card value to -1.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b1259519e618d479ede8a0db5474b3aff99f5056 ]
The call to of_find_node_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented here after the last
usage.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19558/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8466baf788ec3e18836bd9c91ba0b1a07af25878 ]
It is incorrect to enable TX/RX queues (call by mvneta_port_up()) for
port without link. Indeed MTU change for interface without link causes TX
queues to stuck.
Fixes: c5aff18204 ("net: mvneta: driver for Marvell Armada 370/XP
network unit")
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
[gregory.clement: adding Fixes tags and rewording commit log]
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4bf4eed44bfe288f459496eaf38089502ef91a79 ]
If ioh_gpio_probe() fails on devm_irq_alloc_descs() then chip may point
to any element of chip_save array, so reverse iteration from pointer chip
may become chip_save[-1] and gpiochip_remove() will operate with wrong
memory.
The patch fix the error path of ioh_gpio_probe() to correctly bypass
chip_save array.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b3cadaa485f0c20add1644a5c877b0765b285c0c ]
This fixes two issues with setting hid->name information.
CC net/bluetooth/hidp/core.o
In function ‘hidp_setup_hid’,
inlined from ‘hidp_session_dev_init’ at net/bluetooth/hidp/core.c:815:9,
inlined from ‘hidp_session_new’ at net/bluetooth/hidp/core.c:953:8,
inlined from ‘hidp_connection_add’ at net/bluetooth/hidp/core.c:1366:8:
net/bluetooth/hidp/core.c:778:2: warning: ‘strncpy’ output may be truncated copying 127 bytes from a string of length 127 [-Wstringop-truncation]
strncpy(hid->name, req->name, sizeof(req->name) - 1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC net/bluetooth/hidp/core.o
net/bluetooth/hidp/core.c: In function ‘hidp_setup_hid’:
net/bluetooth/hidp/core.c:778:38: warning: argument to ‘sizeof’ in ‘strncpy’ call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess]
strncpy(hid->name, req->name, sizeof(req->name));
^
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 673bc519c55843c68c3aecff71a4101e79d28d2b ]
The tx completion of multiple mgmt frames can be bundled
in a single event and sent by the firmware to host, if this
capability is not disabled explicitly by the host. If the host
cannot handle the bundled mgmt tx completion, this capability
support needs to be disabled in the wmi init cmd, sent to the firmware.
Add the host capability indication flag in the wmi ready command,
to let firmware know the features supported by the host driver.
This field is ignored if it is not supported by firmware.
Set the host capability indication flag(i.e. host_capab) to zero,
for disabling the support of bundle mgmt tx completion. This will
indicate the firmware to send completion event for every mgmt tx
completion, instead of bundling them together and sending in a single
event.
Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4dc98c1995482262e70e83ef029135247fafe0f2 ]
tw_probe() returns 0 in case of fail of tw_initialize_device_extension(),
pci_resource_start() or tw_reset_sequence() and releases resources.
twl_probe() returns 0 in case of fail of twl_initialize_device_extension(),
pci_iomap() and twl_reset_sequence(). twa_probe() returns 0 in case of
fail of tw_initialize_device_extension(), ioremap() and
twa_reset_sequence().
The patch adds retval initialization for these cases.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2dbb3ec29a6c069035857a2fc4c24e80e5dfe3cc ]
We have seen that on some platforms, SATA device never show any DEVSLP
residency. This prevent power gating of SATA IP, which prevent system
to transition to low power mode in systems with SLP_S0 aka modern
standby systems. The PHY logic is off only in DEVSLP not in slumber.
Reference:
https://www.intel.com/content/dam/www/public/us/en/documents/datasheets
/332995-skylake-i-o-platform-datasheet-volume-1.pdf
Section 28.7.6.1
Here driver is trying to do read-modify-write the devslp register. But
not resetting the bits for which this driver will modify values (DITO,
MDAT and DETO). So simply reset those bits before updating to new values.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0494d7ffdcebc6935410ea0719b24ab626675351 ]
isa_virt_to_bus() & isa_bus_to_virt() claim to treat ISA bus addresses
as being identical to physical addresses, but they fail to do so in the
presence of a non-zero PHYS_OFFSET.
Correct this by having them use virt_to_phys() & phys_to_virt(), which
consolidates the calculations to one place & ensures that ISA bus
addresses do indeed match physical addresses.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20047/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3f259111583801013cb605bb4414aa529adccf1c ]
The QCA4019 hw1.0 firmware 10.4-3.2.1-00050 and 10.4-3.5.3-00053 (and most
likely all other) seem to ignore the WMI_CHAN_FLAG_DFS flag during the
scan. This results in transmission (probe requests) on channels which are
not "available" for transmissions.
Since the firmware is closed source and nothing can be done from our side
to fix the problem in it, the driver has to work around this problem. The
WMI_CHAN_FLAG_PASSIVE seems to be interpreted by the firmware to not
scan actively on a channel unless an AP was detected on it. Simple probe
requests will then be transmitted by the STA on the channel.
ath10k must therefore also use this flag when it queues a radar channel for
scanning. This should reduce the chance of an active scan when the channel
might be "unusable" for transmissions.
Fixes: e8a50f8ba4 ("ath10k: introduce DFS implementation")
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 32cd3ee511f4e07ca25d71163b50e704808d22f4 ]
If there is an error during processing of a callback message, it leads
to refrence leak on the client structure and eventually an unclean
superblock.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 21b8732eb4479b579bda9ee38e62b2c312c2a0e5 ]
After update of kernel, the perf tool doesn't run anymore on my 32MB RAM
powerpc board, but still runs on a 128MB RAM board:
~# strace perf
execve("/usr/sbin/perf", ["perf"], [/* 12 vars */]) = -1 ENOMEM (Cannot allocate memory)
--- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} ---
+++ killed by SIGSEGV +++
Segmentation fault
objdump -x shows that .bss section has a huge size of 24Mbytes:
27 .bss 016baca8 101cebb8 101cebb8 001cd988 2**3
With especially the following objects having quite big size:
10205f80 l O .bss 00140000 runtime_cycles_stats
10345f80 l O .bss 00140000 runtime_stalled_cycles_front_stats
10485f80 l O .bss 00140000 runtime_stalled_cycles_back_stats
105c5f80 l O .bss 00140000 runtime_branches_stats
10705f80 l O .bss 00140000 runtime_cacherefs_stats
10845f80 l O .bss 00140000 runtime_l1_dcache_stats
10985f80 l O .bss 00140000 runtime_l1_icache_stats
10ac5f80 l O .bss 00140000 runtime_ll_cache_stats
10c05f80 l O .bss 00140000 runtime_itlb_cache_stats
10d45f80 l O .bss 00140000 runtime_dtlb_cache_stats
10e85f80 l O .bss 00140000 runtime_cycles_in_tx_stats
10fc5f80 l O .bss 00140000 runtime_transaction_stats
11105f80 l O .bss 00140000 runtime_elision_stats
11245f80 l O .bss 00140000 runtime_topdown_total_slots
11385f80 l O .bss 00140000 runtime_topdown_slots_retired
114c5f80 l O .bss 00140000 runtime_topdown_slots_issued
11605f80 l O .bss 00140000 runtime_topdown_fetch_bubbles
11745f80 l O .bss 00140000 runtime_topdown_recovery_bubbles
This is due to commit 4d255766d2 ("perf: Bump max number of cpus
to 1024"), because many tables are sized with MAX_NR_CPUS
This patch gives the opportunity to redefine MAX_NR_CPUS via
$ make EXTRA_CFLAGS=-DMAX_NR_CPUS=1
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170922112043.8349468C57@po15668-vm-win7.idsi0.si.c-s.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3611ce9911267cb93d364bd71ddea6821278d11f ]
For the case when sbi->segs_per_sec > 1, take section:segment = 5 for
example, if segment 1 is just used and allocate new segment 2, and the
blocks of segment 1 is invalidated, at this time, the previous code will
use __set_test_and_free to free the free_secmap and free_sections++,
this is not correct since it is still a current section, so fix it.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0419056ec8fd01ddf5460d2dba0491aad22657dd ]
If number of isa and pci boards exceed NUM_BOARDS on the path
rp_init()->init_PCI()->register_PCI() then buffer overwrite occurs
in register_PCI() on assign rcktpt_io_addr[i].
The patch adds check on upper bound for index of registered
board in register_PCI.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f019f07ecf6a6b8bd6d7853bce70925d90af02d1 ]
The uio_unregister_device() function assumes that if "info->uio_dev" is
non-NULL that means "info" is fully allocated. Setting info->uio_de
has to be the last thing in the function.
In the current code, if request_threaded_irq() fails then we return with
info->uio_dev set to non-NULL but info is not fully allocated and it can
lead to double frees.
Fixes: beafc54c4e ("UIO: Add the User IO core code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 81ae962d7f180c0092859440c82996cccb254976 ]
Free resources instead of direct return of the error code if kim_probe
fails.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d63e2fc804c46e50eee825c5d3a7228e07048b47 ]
During raid5 replacement, the stripes can be marked with R5_NeedReplace
flag. Data can be read from being-replaced devices and written to
replacing spares without reading all other devices. (It's 'replace'
mode. s.replacing = 1) If a being-replaced device is dropped, the
replacement progress will be interrupted and resumed with pure recovery
mode. However, existing stripes before being interrupted cannot read
from the dropped device anymore. It prints lots of WARN_ON messages.
And it results in data corruption because existing stripes write
problematic data into its replacement device and update the progress.
\# Erase disks (1MB + 2GB)
dd if=/dev/zero of=/dev/sda bs=1MB count=2049
dd if=/dev/zero of=/dev/sdb bs=1MB count=2049
dd if=/dev/zero of=/dev/sdc bs=1MB count=2049
dd if=/dev/zero of=/dev/sdd bs=1MB count=2049
mdadm -C /dev/md0 -amd -R -l5 -n3 -x0 /dev/sd[abc] -z 2097152
\# Ensure array stores non-zero data
dd if=/root/data_4GB.iso of=/dev/md0 bs=1MB
\# Start replacement
mdadm /dev/md0 -a /dev/sdd
mdadm /dev/md0 --replace /dev/sda
Then, Hot-plug out /dev/sda during recovery, and wait for recovery done.
echo check > /sys/block/md0/md/sync_action
cat /sys/block/md0/md/mismatch_cnt # it will be greater than 0.
Soon after you hot-plug out /dev/sda, you will see many WARN_ON
messages. The replacement recovery will be interrupted shortly. After
the recovery finishes, it will result in data corruption.
Actually, it's just an unhandled case of replacement. In commit
<f94c0b6658c7> (md/raid5: fix interaction of 'replace' and 'recovery'.),
if a NeedReplace device is not UPTODATE then that is an error, the
commit just simply print WARN_ON but also mark these corrupted stripes
with R5_WantReplace. (it means it's ready for writes.)
To fix this case, we can leverage 'sync and replace' mode mentioned in
commit <9a3e1101b827> (md/raid5: detect and handle replacements during
recovery.). We can add logics to detect and use 'sync and replace' mode
for these stripes.
Reported-by: Alex Chen <alexchen@synology.com>
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6a64f6e1591322beb8ce16e952a53582caf2a15c ]
When __transport_register_session is called from transport_register_session
irqs will already have been disabled, so we do not want the unlock irq call
to enable them until the higher level has done the final
spin_unlock_irqrestore/ spin_unlock_irq.
This has __transport_register_session use the save/restore call.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 40b25bce0adbe641a744d1291bc0e51fb7f3c3d8 ]
There is a bug in regards to deferred probing within the drivers core
that causes GPIO-driver to suspend after its users. The bug appears if
GPIO-driver probe is getting deferred, which happens after introducing
dependency on PINCTRL-driver for the GPIO-driver by defining "gpio-ranges"
property in device-tree. The bug in the drivers core is old (more than 4
years now) and is well known, unfortunately there is no easy fix for it.
The good news is that we can workaround the deferred probe issue by
changing GPIO / PINCTRL drivers registration order and hence by moving
PINCTRL driver registration to the arch_init level and GPIO to the
subsys_init.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6c3711ec64fd23a9abc8aaf59a9429569a6282df ]
This driver was recently updated to use serdev, so add the appropriate
dependency. Without this one can get compiler warnings like this if
CONFIG_SERIAL_DEV_BUS is not enabled:
CC [M] drivers/bluetooth/hci_h5.o
drivers/bluetooth/hci_h5.c:934:36: warning: ‘h5_serdev_driver’ defined but not used [-Wunused-variable]
static struct serdev_device_driver h5_serdev_driver = {
^~~~~~~~~~~~~~~~
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d89d41556141a527030a15233135ba622ba3350d ]
Android's header sanitization tool chokes on static inline functions having a
trailing semicolon, leading to an incorrectly parsed header file. While the
tool should obviously be fixed, also fix the header files for the two affected
functions: ethtool_get_flow_spec_ring() and ethtool_get_flow_spec_ring_vf().
Fixes: 8cf6f497de ("ethtool: Add helper routines to pass vf to rx_flow_spec")
Reporetd-by: Blair Prescott <blair.prescott@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a39284ae9d2ad09975c8ae33f1bd0f05fbfbf6ee ]
There are only 2 callers of scif_get_new_port() and both appear to get
the error handling wrong. Both treat zero returns as error, but it
actually returns negative error codes and >= 0 on success.
Fixes: e9089f43c9 ("misc: mic: SCIF open close bind and listen APIs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c83532fb0fe053d2e43e9387354cb1b52ba26427 upstream.
SWAP support on ARC was fixed earlier by
commit 6e3761145a9b ("ARC: Fix CONFIG_SWAP")
so now we may safely enable it on platforms that
have external media like USB and SD-card.
Note: it was already allowed for HSDK
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: stable@vger.kernel.org # 6e3761145a9b: ARC: Fix CONFIG_SWAP
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50972fe78f24f1cd0b9d7bbf1f87d2be9e4f412e upstream.
Fix ordering of link creation between node->prev and prev->next in
osq_lock(). A case in which the status of optimistic spin queue is
CPU6->CPU2 in which CPU6 has acquired the lock.
tail
v
,-. <- ,-.
|6| |2|
`-' -> `-'
At this point if CPU0 comes in to acquire osq_lock, it will update the
tail count.
CPU2 CPU0
----------------------------------
tail
v
,-. <- ,-. ,-.
|6| |2| |0|
`-' -> `-' `-'
After tail count update if CPU2 starts to unqueue itself from
optimistic spin queue, it will find an updated tail count with CPU0 and
update CPU2 node->next to NULL in osq_wait_next().
unqueue-A
tail
v
,-. <- ,-. ,-.
|6| |2| |0|
`-' `-' `-'
unqueue-B
->tail != curr && !node->next
If reordering of following stores happen then prev->next where prev
being CPU2 would be updated to point to CPU0 node:
tail
v
,-. <- ,-. ,-.
|6| |2| |0|
`-' `-' -> `-'
osq_wait_next()
node->next <- 0
xchg(node->next, NULL)
tail
v
,-. <- ,-. ,-.
|6| |2| |0|
`-' `-' `-'
unqueue-C
At this point if next instruction
WRITE_ONCE(next->prev, prev);
in CPU2 path is committed before the update of CPU0 node->prev = prev then
CPU0 node->prev will point to CPU6 node.
tail
v----------. v
,-. <- ,-. ,-.
|6| |2| |0|
`-' `-' `-'
`----------^
At this point if CPU0 path's node->prev = prev is committed resulting
in change of CPU0 prev back to CPU2 node. CPU2 node->next is NULL
currently,
tail
v
,-. <- ,-. <- ,-.
|6| |2| |0|
`-' `-' `-'
`----------^
so if CPU0 gets into unqueue path of osq_lock it will keep spinning
in infinite loop as condition prev->next == node will never be true.
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
[ Added pictures, rewrote comments. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: sramana@codeaurora.org
Link: http://lkml.kernel.org/r/1500040076-27626-1-git-send-email-prsood@codeaurora.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 476accbe2f6ef69caeebe99f52a286e12ac35aee upstream.
There is a strange __GFP_NOMEMALLOC usage pattern in SELinux,
specifically GFP_ATOMIC | __GFP_NOMEMALLOC which doesn't make much
sense. GFP_ATOMIC on its own allows to access memory reserves while
__GFP_NOMEMALLOC dictates we cannot use memory reserves. Replace this
with the much more sane GFP_NOWAIT in the AVC code as we can tolerate
memory allocation failures in that code.
Signed-off-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c29c31830a4eca724e137a9339137204bbb31be upstream.
If a spinner is present, there is a chance that the load of
rwsem_has_spinner() in rwsem_wake() can be reordered with
respect to decrement of rwsem count in __up_write() leading
to wakeup being missed:
spinning writer up_write caller
--------------- -----------------------
[S] osq_unlock() [L] osq
spin_lock(wait_lock)
sem->count=0xFFFFFFFF00000001
+0xFFFFFFFF00000000
count=sem->count
MB
sem->count=0xFFFFFFFE00000001
-0xFFFFFFFF00000001
spin_trylock(wait_lock)
return
rwsem_try_write_lock(count)
spin_unlock(wait_lock)
schedule()
Reordering of atomic_long_sub_return_release() in __up_write()
and rwsem_has_spinner() in rwsem_wake() can cause missing of
wakeup in up_write() context. In spinning writer, sem->count
and local variable count is 0XFFFFFFFE00000001. It would result
in rwsem_try_write_lock() failing to acquire rwsem and spinning
writer going to sleep in rwsem_down_write_failed().
The smp_rmb() will make sure that the spinner state is
consulted after sem->count is updated in up_write context.
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: longman@redhat.com
Cc: parri.andrea@gmail.com
Cc: sramana@codeaurora.org
Link: http://lkml.kernel.org/r/1504794658-15397-1-git-send-email-prsood@codeaurora.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e00f4f4d0ff7e13b9115428a245b49108d625f09 upstream.
blkcg allocates some per-cgroup data structures with GFP_NOWAIT and
when that fails falls back to operations which aren't specific to the
cgroup. Occassional failures are expected under pressure and falling
back to non-cgroup operation is the right thing to do.
Unfortunately, I forgot to add __GFP_NOWARN to these allocations and
these expected failures end up creating a lot of noise. Add
__GFP_NOWARN.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Marc MERLIN <marc@merlins.org>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
