Model and configure MDSS Display Port PLL for SDM660 target.
Add changes to define and register DP VCO, divider and mux clocks
as per common clock infrastructure.
Change-Id: Ice83e21323087e81e2f30998260be85120e41fa8
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
PM660A supports LAB-IBB and OLEDB regulator while they are not
existing in PM660L. Add device nodes and enable them for PM660A.
Change-Id: I0210accea5e3a358830acf2235f72bad003d8144
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Correct the conditional check in the oledb_hw_init to avoid programming the
configuration registers if module is already enabled. Also correct the
conditional check in the oledb_regulator_disable.
CRs-Fixed: 1114628
Change-Id: I1af6c5ba6427050832ae04e693f161c517ef03a2
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Programming the default (1.5x) LAB_CURRENT_SENSE configuration is not
required for PM660A. Configure it only if explicitly specified in the
DT config.
CRs-Fixed: 1114628
Change-Id: Ib09e6430e99a7f39a9d2f837494a977daff354ba
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Currently usb function instance driver depends on diag char driver to
create the channel (using usb_diag_open api). Failing to create channel
can result in enumeration failure. Avoid this dependency by creating
diag channel from function instance if not available. Same channel
will be reused when diag char driver creates/opens the channel.
Change-Id: I11debd0189d81542762af22b3d203728d2266a42
Signed-off-by: Liangliang Lu <luliang@codeaurora.org>
Currently, the code reports whatever is in the BATTERY_CHARGING_STATUS_1
register for the battery status.
We have seen that the register continues to report FAST charging
even when the chg_ok pin could be low or dc path is in collapsed
state (collapsed state is treated as dc not online). This unexpected
report of charging while it is not really charging breaks certain
features.
Fix it by checking for usb_online and dc_online. But make sure that
if the battery is full it continues to report so.
Change-Id: I732c916b4f63f9ff0fd8d9c77ce5253c309698a4
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Drain WLAN_PROD pipe by sending a QMI to modem only in case
that the pipe is not empty. Also for SSR case, set a timeout
for QMI message response.
Change-Id: Iecd63a929b622d80ad4d4ebf15e8de9251f7d9d3
CRs-Fixed: 1113156
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Fix the HBR2 pattern generation by ensuring that the pattern
selection bit is not overwritten by a subsequent register write
that updates the scrambler reset count.
CRs-Fixed: 1108048
Change-Id: I2d2dcc79de82756eab015a343c24411a735947c9
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
This config is already enabled in perf defconfig but missed
in the debug defconfig.
Change-Id: I85ba0624318a0141fb8b6418e8e923201a108c55
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
To fix access of unmapped memory region, add
lpi registers in pdata of node. This enables
unmapping when pdata is destroyed.
Change-Id: I62b2e50f8db39bdc430299a817ba621288ab4f3e
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Currently mac80211 does not inform the driver of the session
block ack timeout when starting a rx aggregation session.
Drivers that manage the reorder buffer need to know this
parameter.
Seeing that there are now too many arguments for the
drv_ampdu_action() function, wrap them inside a structure.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
Git-commit: 50ea05efaf3bed7dd34bcc2635a8b3f53bd0ccc1
[rsirasan@codeaurora.org: resolved conflicts in include/net/mac80211.h and
net/mac80211/agg-rx.c and not pulled changes for drivers/net/wireless/intel/ and
drivers/net/wireless/st/ since path is not maintained]
CRs-Fixed: 1112956
Change-Id: I15d86f60cd3bd33e392b313f7a4ee2fca91207d4
Signed-off-by: Rajeev Kumar Sirasanagandla <rsirasan@codeaurora.org>
SMD is being removed from defconfig of SDM660. All the references
to SMD like macros and header files are removed from fastrpc driver.
Change-Id: Iaa961e7faee4b59562fc92133c5154027c325f53
Acked-by: Vishnu Karthik <vikarthi@qti.qualcomm.com>
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
Using Debugfs virtual file system to make debug information available
to userspace. A directory called adsprpc is created in debugfs root
directory and a debugfs file is created in this directory for every
device open in the fastrpc driver.
Change-Id: Ie944424e30ddc810ff29116481d63b266c47c037
Acked-by: Vishnu Karthik <vikarthi@qti.qualcomm.com>
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
New stat param "num_qmb_int_handled" is added to rx_ch_stats
by IPA uC in WDI2.0. This results in a size mismatch and
WDI stats feature is broken. Make a change to update the
new param "num_qmb_int_handled" in rx_ch_stats structure.
Also make a change to read all the rx_ch_stats to avoid
printing stale values.
Change-Id: I5d141f531f1cfdab0bd0056041e22acb26657960
Acked-by: Chaitanya Pratapa <cpratapa@qti.qualcomm.com>
Signed-off-by: Utkarsh Saxena <usaxena@codeaurora.org>
