Move SPCOM_MAX_CHANNELS to common H file to make sure that kernel spcom
driver and user space spcomlib library are synced.
Change-Id: I5e19f8def7de755fa89b6a5c67e9d3372f8433f1
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
When echo values to debugfs entry force_error, unclocked
register access error would be detected. This change fixes
it by making sure the host is powered up and host clock is
ticking before access force event register for error
interrupt status.
Change-Id: I995523d64de36cd4872209db4a558aa83103fbb3
Signed-off-by: Can Guo <cang@codeaurora.org>
EXIT_SNK_BASED_ON_CC bit is only to be used while we are in hard
reset. There is a possibility for that bit to remain set if
cable were removed while a hard reset was in progress.
Clear that bit in removal path
Change-Id: I5e0776de9322a8015f851312df51a202e35c7a78
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Align partial update roi start and height to 256 pixels
for nt35597 panel.
Change-Id: I56e78d1adab769c4d226d88cfb5badcfe7eb6dc2
Signed-off-by: Animesh Kishore <animeshk@codeaurora.org>
With the current SIGDET value of 0x6E there
seems to be NOP timeouts seen frequently.
Hence, change the SIGDET value to 0x6C as per
updated Hardware Programming Guide.
Change-Id: I46426382033603c4727de6b0a485015eed690f34
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Neutrino reset GPIO need to be be disabled at bootup.
It will be enabled by driver in its probe.
CRs-Fixed: 1072096
Change-Id: Ie4a0428523b0764e0234f0ae51a90c250166cca9
Signed-off-by: Jaiju Yesudasan <cjaijuy@codeaurora.org>
In case of unmap call, regulator is enabled/disabled. This may introduce
additional delay. For clients who do not detach, it's not possible to keep
regulator vote while smmu is attached.
Add support for regulator deferred disable. The time delay for deferred
disable can be set using dt property qcom,deferred-regulator-disable-delay
in ms.
Change-Id: I462e1999bd81f6332169b24749632d7b247c75c5
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
Use per CPU NOCB threads to process RCU callbacks, rather than processing
the callbacks in softirq context. Processing large number of callbacks
in softirq context may result in delayed execution of other softirqs, so
remove processing of callbacks from softirq context.
Change-Id: I90d070ad824d2df0f3e1ee29da1b48ae2887b64b
Signed-off-by: Wei Li <weili@codeaurora.org>
The driver waits 20mS after setting ICL to a step lower
than settled value before increasing it back to the effective
value. That 20mS delay is not required and causes PR_SWAP compliance
tests to fail. Remove it.
Change-Id: I8bd43a885c554df3590499ddf2a219e816e28734
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
wil6210 devices can have different PCIe bar size, hence get the
bar size from PCIe device instead of using a constant bar size.
Change-Id: I02fe3f05e184b141c9a5519dd97c3f2d2eb99baf
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: d86d47164b227f01c3ec34c3f5a1613977d563eb
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Signed-off-by: Maya Erez <merez@codeaurora.org>
Added vendor commands for low level control over
RF sectors. It allows user space a fine-grained control
over RF characteristics for TX and RX, such as direction
and gain of TX/RX. Main usages are debugging and diagnostics,
but also operational use cases.
API includes getting/setting a specific RF sector
configuration, as well as getting/setting the selected
sector which is used to communicate with a station.
Change-Id: I2b1f2bab4f0fdc3d0177b19b7072c19f9ffa78bd
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-commit: 0216a895946fa683ea51b842501e66106c0f1017
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
[merez@codeaurora.org: fixed merge conflicts]
Signed-off-by: Maya Erez <merez@codeaurora.org>
