Efuse parameters are used to update qusb analog tuning values.
Change-Id: I4bc919ba7cf24d73cbc6cac392e00f81005bf64c
Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
Tune1 HSTX_TRIM parameter varies from part to part and needs to
be programmed using fused values. Update the code to read
the efuse register and update tune1 parameter. On previous
platforms this used to be tune2.
Change-Id: I7a2efa3c2409ba5dbb1ae9581738518b9457a971
Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
Update the sequence to include tune1 and tune2 parameters. While
at it update the comments to include register names.
Change-Id: Ib8ff42a6e05c0065b19e977eb56f6b96a78fcf39
Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
Update the tcsr_clamp_dig_n signal and phy init sequence
to reduce the random leakage from qusb2 phy. Random leakage
can result from turning on/off analog power rails
before/after digital power rails.
Change-Id: Id51a2d34f61c0a41891551d15b706872abf13809
Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
Analog and digital power rails connected to the phy can be turned
on/off in any order. This may result in random leakage in the phy
as it expects certain power rails to be on/off in certain order.
Avoid random leakage on qusb2 phy by
1. Disable pll when phy is suspended/disconnected.
2. Reset and assert clamp dig_n signal to put dp/dm lines in high
impedance state.
Change-Id: I1bafa7f824af8bbb3f67a71b81bf23b0a9c7164e
Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
xdci release function is called during xdci connect
failure cleanup. A bug passing the tethering protocol
to the function instead of the tethering type caused
it to fail and cease the cleanup operations.
Change-Id: I6337f93c13678c9256dfd46825f9a317cdaa0a1b
CRs-fixed: 1057013
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
During SSR, we observe cases where card enter bad state
and does not responding to any I/O commands. Fix it by
powering off and on the card.
Change-Id: Ia3ab2781c93d1cfe7427e2b1c2644f6628f6465f
CRs-Fixed: 1058794
Signed-off-by: Komal Seelam <kseelam@codeaurora.org>
DMA coherent allocation was done with inappropriate
flags causing memory allocation to fail occasionally.
Use GFP_KERNEL flag as well as fix up some cleanup
actions.
CRs-Fixed: 1060305
Change-Id: I93c9340439dd65c50764dd078071bf66f65a9464
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
This algorithm allows for programmable charge current values
based on programmable thresholds on state-of-charge (SoC).
Adjusting battery charge current based on the battery SoC
may lead to extended battery capacity over number of charge
cycles.
Charging profile to be used relies on battery characterization
data from battery cell manufacurers.
CRs-Fixed: 1052854
Change-Id: I8844a3e8428b045514863d72c08f6c6b2b2ac2a4
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Change the ddr width from 8 to 4 for msmhamster, due to
ddr width being halved in hardware.
Change-Id: I40f5972be54393813ad04b07c032f494888ad5e8
Signed-off-by: David Dai <daidavid1@codeaurora.org>
* fix skb->dev vs par->in/out
When there is some forwarding going on, it introduces extra state
around devs associated with xt_action_param->in/out and sk_buff->dev.
E.g.
par->in and par->out are both set, or
skb->dev and par->out are both set (and different)
This would lead qtaguid to make the wrong assumption about the
direction and update the wrong device stats.
Now we rely more on par->in/out.
* Fix handling when qtaguid is used as "owner"
When qtaguid is used as an owner module, and sk_socket->file is
not there (happens when tunnels are involved), it would
incorrectly do a tag stats update.
* Correct debug messages.
Bug: 11687690
Change-Id: I2b1ff8bd7131969ce9e25f8291d83a6280b3ba7f
CRs-Fixed: 747810
Signed-off-by: JP Abgrall <jpa@google.com>
Git-commit: 2b71479d6f5fe8f33b335f713380f72037244395
Git-repo: https://www.codeaurora.org/cgit/quic/la/kernel/mediatek
[imaund@codeaurora.org: Resolved trivial context conflicts.]
Signed-off-by: Ian Maund <imaund@codeaurora.org>
[bflowers@codeaurora.org: Resolved merge conflicts]
Signed-off-by: Bryse Flowers <bflowers@codeaurora.org>
When playing secure content, framebuffer is setup as secure in the
rotator. But the sw timestamp is not going through the secure
route, and must clear out the secure setting, otherwise a smmu fault
will be issued. This fix make sure the secure buffer status is
cleared during the sw timestamp submission.
CRs-Fixed: 1059620
Change-Id: Ifb0f9928fa1d948351e6fc1ad925a070a7f50a96
Signed-off-by: Benjamin Chan <bkchan@codeaurora.org>
Initialize some local variables before using them and safely return an
error code when encounter error cases in the SDE rotator driver.
CRs-Fixed: 1060558
Change-Id: I25406b13ac2007f1789d8d32e428c39dac4c29cf
Signed-off-by: Benjamin Chan <bkchan@codeaurora.org>
Add support to enable WDI 2.0 interface on IPA version 2.6.1
which is used in falcon.
Change-Id: Id6460f21245808b739ad215fe8073ae7cae8422c
Acked-by: Mohammed Javid <mjavid@qti.qualcomm.com>
Signed-off-by: Utkarsh Saxena <usaxena@codeaurora.org>
When WiFi is turned off from userspace, save power by toggling
WLAN_EN gpio and restore power when wifi is loaded again.
CRs-Fixed: 1058794
Change-Id: I0257698d9d168d7c889436a05693061cafe5ea7c
Signed-off-by: Komal Seelam <kseelam@codeaurora.org>
This extends NL80211_CMD_CONNECT to allow the NL80211_ATTR_PREV_BSSID
attribute to be used similarly to way this was already allowed with
NL80211_CMD_ASSOCIATE. This allows user space to request reassociation
(instead of association) when already connected to an AP. This provides
an option to reassociate within an ESS without having to disconnect and
associate with the AP.
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Git-commit: ba6fbacf9c073effaedf0c52fe7e52e2baf67725
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
Change-Id: Idfd211db838cdde40ecc02a1803eac5c1ebfbc77
CRs-fixed: 1004073
Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org>
Define macro to indicate backport support for prev_bssid
parameter in connect request. This parameter allows the
driver to decide whether to do a new association or a
re-association on a cfg80211 connect request.
Change-Id: I760e2999ec56c9aa0c44ac7b062ee1755192299f
CRs-Fixed: 1004073
Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org>
Define macro to indicate backport support for bssid parameter
in scan request.
Change-Id: I542b0de66948610135cf69a3d24c1561017fe7a8
CRs-Fixed: 996660
Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org>
fd(s) cannot uniquely identify buffers queued by cross-process
clients. Use ion handles to compare and match already-mapped-
buffers irrespective of data or extradata planes.
CRs-Fixed: 1060416
Change-Id: I591f18aa225cc6690bf423f2ae5bc7dafd4dad78
Signed-off-by: Praveen Chavan <pchavan@codeaurora.org>
UFS driver integrates a new functionality to support inline
crypto engine, which was added to the crypto component.
In case ICE driver is initialized after UFS driver, we experience
long boot time as a result of probe defer handling.
Changing the modules order in the makefile will reduce the
probability for probe defer cases and will allow maintaining
shorter boot time.
Change-Id: I941a577a427ad45e7519408425e00541e825efc6
Signed-off-by: Maya Erez <merez@codeaurora.org>
This allows scans for a specific BSSID to be optimized by the user space
application by requesting the driver to set the Probe Request frame
BSSID field (Address 3) to the specified BSSID instead of the wildcard
BSSID. This prevents other APs from replying which reduces airtime need
and latency in getting the response from the target AP through.
This is an optimization and as such, it is acceptable for some of the
drivers not to support the mechanism. If not supported, the wildcard
BSSID will be used and more responses may be received.
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Git-commit: 0889675a9503f48d1ad01b4eaa202f89469b2b62
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Change-Id: I20cf654661c11880055d022e0c9ec77beab659e8
CRs-fixed: 996660
Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org>
Newer QCOM UFS host controller doesn't need to execute
the special LPM mode configuration when switching to SVS2
mode. This change looks at the host controller version
to bypass this special configuration for newer controller
version.
Change-Id: Ib84663955c0c0db6124819c4c4749e5c347a3495
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
New version of phy-qcom-ufs-qmp-v3 supports 2 lanes,
this change adds the config table to enable 2 lanes.
Change-Id: Ie916e7090d3660711159b886c27ee3709891ef2b
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
On Dual-WiFi platforms, SDIO and PCIe dumps are overwritten by
the crashscope, as they use the same dump name.
Use different dump names to distinguish the dump between SDIO and PCIe.
CRs-Fixed: 1037346
Change-Id: I59c0ee5d3c5f206ae09d6b813f1e5c1ce1434cc1
Signed-off-by: Anand Kumar <anandkumar@codeaurora.org>
A number of functions include ext4_add_dx_entry, make_indexed_dir,
etc. are being passed a dentry even though the only thing they use is
the containing parent. We can shrink the code size slightly by maing
this replacement. This will also be useful in cases where we don't
have a dentry as the argument to the directory entry insert functions.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: "Theodore Ts'o" <tytso@google.com>
Git-commit: e3b970d19418e2cfeeaca323ae620cc2dab22086
Git-repo: https://android.googlesource.com/kernel/msm/
Change-Id: I565f822a8fc795740155154a7f003340b26ee128
Signed-off-by: Andrey Markovytch <andreym@codeaurora.org>
When event needs to be processed synchronously, event posting
thread waits for the completion. After completion, result from
the event work is retrieved and event buffer would be freed. But
if waiting thread gets interrupted then wait_for_completion API
returns failure and it also frees the buffer posted for
processing. Event work queue may accesses the freed buffer and
crash the system.
Fix the issue by properly synchronizing event buffer free between
caller and event work by checking for return value of
wait_for_completion.
CRs-fixed: 1057180
Change-Id: Ic3968fd4c0232da6bc9a97d94376f540f62bd2e6
Signed-off-by: Prashanth Bhatta <bhattap@codeaurora.org>
Enable CoreSight abort for msmcobalt. CoreSight driver will
dump any trace present in the current sink in case we hit a
kernel panic, user fault or an undefined instruction.
Change-Id: Iff2fdfb547617425182429d95fb1d3b9a2e4321f
Signed-off-by: Satyajit Desai <sadesai@codeaurora.org>
