scm_call2 is printing the input arguments if TZ ret value is < 0
leading to information leak. Remove printing input arguments.
Change-Id: I21dd6d83fa979aed2c79ebb2c9c8de63a247dded
CRs-Fixed: 1076407
Signed-off-by: Swetha Chikkaboraiah <schikk@codeaurora.org>
Signed-off-by: Paresh Purabhiya <ppurab@codeaurora.org>
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Addition of Ngid breaks some third party applications, which
are dependent on a particular order of fields. This change
moves the field to the end, to fix this issue.
Change-Id: Ifdc781aca49dcb535d5fa5005b85dc87604560dc
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Commit 18cd808986ba101d ("usb: dwc3-msm: Make power collapse
and power-on-reset mandatory") removed the device tree properties
for power-collapse due to which the dwc3_restart_usb_work() which
was supposed to do a full POR sequence by simulating a cable
disconnection-reconnection sequence now only does a dbm reset.
Fix this, so that dwc3_restart_usb_work(), does a full POR.
CRs-Fixed: 975249
Change-Id: Iaabe9283ec80954a2e504a55f2b4cdf93ca8ae46
Signed-off-by: Azhar Shaikh <azhars@codeaurora.org>
If the qos value is increased only for a subset of cpu's
aggregated qos for those cpu's is still the previous value.
This is because the qos request list is maintained per
request and not per cpu. In this case as there is no change
in aggregated qos value, these cpu's are not wokenup to
take the new qos value into effect.
So wakeup cpu's even if the aggregated qos value does not change
but the cpumask changes.
Change-Id: If5a4a100108e85e04beb77e5249bd6c452672edf
Signed-off-by: Anil Kumar Mamidala <amami@codeaurora.org>
Add required changes for LDOs for msm8998-interposer-msmfalcon
for USB functionality to be working.
Change-Id: I121651a49ef27ba02f1960ed5c95baf93b00d1f5
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Add required USBPD PHY device node for msmfalcon for USB PD
functionality to be working.
Change-Id: I8cd2981f176e08c1ea4f8a9b7ff42887b590d941
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Core-ctl module by default, manages cpus instead of msm_performance
module. Set this config to allow msm_performance manage(hot-plug) cores
in the absence of core-ctl.
Change-Id: I02a1007edfc63ad2c2dd99616cb1a64432b08d13
Signed-off-by: Dilip Gudlur <dgudlur@codeaurora.org>
The phy initialization sequence assumes a POR state but
the bootloaders can leave PHY at an already initialized
state, hence there could potentially be issues with the
initialization from ufs driver. Perform a full reset to
start from a power on reset state. Also a reset is
required by the UFS hardware programming guide.
Change-Id: I0118b0d3013166aeec0bb0bc0ef181e48998e758
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
The hardware requirement for delay between assert/deassert
is at least 3-4 sleep clock (32.7KHz) cycles, which comes to
~125us (4/32768). To be on the safe side add 200us delay.
Change-Id: Ib9d27fe7bbf6107b1249b3719f63efdbff4b3795
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
