There is a possible race condition when FG debugfs files are concurrently
accessed by multiple threads. Fix this.
CRs-Fixed: 1105481
Change-Id: I154e7f3cdd8d51cf67ef1dfd9d78f423f183cb64
Signed-off-by: Ankit Sharma <ansharma@codeaurora.org>
Add support for devfreq and cpufreq nodes on SDM630 target
which are needed to scale cpu and DDR frequency.
Change-Id: Ic1051e712a3a6578eb6448538e15be9acb85dc89
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
When an upmigrate ineligible task running on the maximum capacity CPU,
we check if it can be migrated to a lower capacity CPU in tick path.
Add a power cost based check there to prevent the task migration
from a power efficient CPU.
Change-Id: I291c62d7dbf169d5123faba5f5246ad44a7a40dd
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Compute the CPU search mask once by taking task affinity,
cpu_active_mask and cpu_isolated_mask into account and cache
it in cpu_selection_env. This prevents doing the same cpumask
operations multiple times.
Change-Id: I78f35c59e6ee9437b3a522ac7ad856c0251f81ec
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Set the TSPP configuration to enable LPASS time stamps in TSIF HW.
The TSIF adds LPASS timestamps to Transport Stream packets instead
of TSIF internal clock timestamps. This change is required for clock
recovery & AV sync for mediabox project based on LE platform.
CR's-Fixed: 2005724
Change-Id: I43f0e8c2593b12e65e603f23a6c1acb663ef439e
Signed-off-by: Udaya Bhaskara Reddy Mallavarapu <udaym@codeaurora.org>
Signed-off-by: Arun Menon <avmenon@codeaurora.org>
Add audio stream buffer interface to write the Audio demux data
to audio decoder buffers. Add support in TSIF driver to append
LPASS subsystem time stamps to Transport Stream packets in TSIF HW.
This is required for AV sync & clock recovery handling
for mediabox project based on LE platform.
CR's-Fixed: 2005724
Change-Id: I39d2544e958c31ff1abdd2ad77412a87bc2a189b
Signed-off-by: Udaya Bhaskara Reddy Mallavarapu <udaym@codeaurora.org>
Signed-off-by: Arun Menon <avmenon@codeaurora.org>
Add CONSTANT_CHARGE_CURRENT_MAX, to set and get fcc.
CRs-Fixed: 2004173
Change-Id: I3dfed0ca7b2a477e1c106955fa112ba5206e3fa4
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Add new SCM ID to register listener when smcinvoke is supported. Then
TZ, depending on how the listener has been registered, will either
behave in the old way (i.e. rsp[1]=QSEE_LISTENER_ID), or the new way
(rsp[1]=app_id) when smcinvoke is supported. And qseecom will first
to register listener with new SCM ID, if failed, then fallback to
use old ID.
Change-Id: Ia27055db6ec8f26705669ee913919b29461121ca
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Disable CONFIG_ICNSS_DEBUG now that solution is stable.
CRs-fixed: 2006760
Change-Id: Ic2cd7a02f3486ab81739e8b2fe2259087e3539d6
Signed-off-by: Prashanth Bhatta <bhattap@codeaurora.org>
The value of device tree property qcom,connector-temp-max-mdegc is
passed to a wrong variable. Fix it.
CRs-Fixed: 1077217
Change-Id: I705467d91dd8e5e9ea4aa0ab231e29c512608f36
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Current driver has two votables for controlling the usb current
and the usb suspend bit. This could lead to a situation where
the icl votable changes current setting while its suspended.
Changing current setting while suspended causes icl changed
interrupt storm.
Fix it by removing usb_suspend_votable and make all the suspend
voters call usb_icl_votable with 0mA to cause suspend.
Update usb_icl_votable to update current settings only when
not suspended. Moreover disable the interrupt while changing
the current settings and enable the interrupt only after the
unsuspend.
Change-Id: Iafc8ee3c934952b8131d374d0529e865424016d5
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
If LINERESET was detected during hibern8 exit, HW recovers
link back to original speed automatically by PA_INIT sequence,
hence remove the full reset.
Change-Id: I181adf4580c0febed817047a40c1d0621d9c9824
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Auto hibern8 timer will get reset as part of ufshcd_vops_full_reset(),
so reenable the timer in ufshcd_probe_hba().
Change-Id: I8ff85a9fd02f4a6b527666654728c4146cb61f5e
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Set the DMA mask for the SPI device appropriately.
This will alleviate usage of bounce buffers by the dma kernel library and
prevent some of the crashes due to the kernel running out of bounce
buffers.
Change-Id: I7b0b123be6e7bb1e30d0755ca8b1b72ea4e2b5f6
Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
Parallel charging is enabled only for DCP and HVDCP adapters, add
support to enable parallel charging for SDP/CDP/OCP and FLOAT chargers.
While at it, rename PL_DISABLE_HVDCP_VOTER to PL_DELAY_HVDCP_VOTER.
Change-Id: I79b28ee6fd91739fa9895959d9ca3d399506d388
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Read instance type from device tree node to know the storage type
for ICE configuration, which is used to program the corresponding
ICE register during ICE reset.
Change-Id: I0eb423fb84dc89115227abc7c5688df7ae9a4a3c
Signed-off-by: AnilKumar Chimata <anilc@codeaurora.org>
- Verify spcom_dev is not NULL when exported API or callbacks are called.
- Use IS_ERR() when calling a function that returns a pointer.
- Unregister glink client if probe fails.
- Verify number of predefined channels in device tree is valid.
Change-Id: I4255fe651c4088848da1d31bb448394e2d8ce4b5
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
On error, do the necessary cleanup and propagate the error.
Change-Id: Ief048ecfdba3aff77f62e5da5b8207f4e8e606b2
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
As sdcc and ufs ice nodes are common between sdm660
and sdm630, move sdcc and ufs ice nodes to common
device tree file to avoid duplication of nodes.
Change-Id: I1e018ef44759e8cc3ce201e19a1e99ba6bb601bd
Signed-off-by: Brahmaji K <bkomma@codeaurora.org>
During fast cable connect/disconnect, there is chance that
set_suspend() called as part of USB entering low power mode
and PMIC driver asking to remove pulldowns race each other.
This could cause unclocked access and results in crash. Fix this
issue by using mutex to avoid crash due to the race mentioned.
Change-Id: I1babb545d40b8761774cbdd3a57258ed6bc77398
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
If disconnect happens before connect_work done, there is a chance that
port_usb might be NULL before calling ipa_data_start_rx_tx(). This could
cause crash if it happens. Fix it by taking to local variable under
spin lock protection and check later before calling ipa_data_start_rx_tx()
for queuing RX/TX requests to USB HW.
Change-Id: I82d74e34bb4d29eac225d31dac67bf5d5bc39a79
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Shared rails such as CX, MX are controlled by the RPM. RPM aggregates
the votes to these rails and sets the rails at a corner voltage to
satisfy the needs of all the masters.
Add support to read and print the CX, MX rail-stats from shared memory.
cat /d/rpm_rail_stats
Number of Rails:2
rail:mx num_corners:4 current_corner:2 last_entered:0
corner:ret time:0
corner:svs time:0
corner:nom time:0
corner:turb time:0
rail:cx num_corners:5 current_corner:1 last_entered:0
corner:ret time:0
corner:svs2 time:0
corner:svs time:0
corner:nom time:0
corner:turb time:0
Change-Id: I730c4accc1bf4c152ef95f9ce9343a58022c2630
Signed-off-by: Karthik Parsha <kparsha@codeaurora.org>
Signed-off-by: Naresh Malladi <namall@codeaurora.org>
Commit b76105e359 ("usb: pd: Read sink capabilities from device
tree") added support in usbpd driver to pass sink capablities from
device tree. But it introduced bug in case of no sink capablities
passed from device tree as in this case, device_property_read_u32_array()
returns -EINVAL. Due to this, usbpd driver probe fails as usbpd_create()
returns errors. Fix this issue by checking if return value > 0 and then
only try to read sink capablities from device tree. If not, use default
sink capabliites defined in usbpd driver.
Change-Id: I51beeba282c6e067881c664d38c2657843a1c716
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Home key is designed on the PCB level as a compatible solution, but
there is no mechanical hard key installed. Currently, GPIO11 on PM660
has been assigned the interrupt owership to modem, and this will cause
probe failure on gpio-keys driver and fail other gpio keys detection.
So, remove the home key configuration as a temporary solution.
CRs-Fixed: 2006468
Change-Id: Ib42a79e60c0cdf1489a63ba66ce7cde97c0e3f47
Signed-off-by: Yingwei Zhao <cyizhao@codeaurora.org>
The ath10k snoc bus uses NAPI in rx path and tasklet
is no more used. Remove tasklet references from
bus layer. Refactor driver unload path to have
consistency in API uses.
CRs-Fixed: 2005874
Change-Id: Ib9534286ed45bf1394e109c6ca8063cd89a1d58e
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Fix memory corruption in Goodix touchscreen driver, by resetting
the global structure cmd_head to zero (except *data and wr flag)
in goodix_tool_write handler on error case.
Change-Id: I4f7f8f464b93571627b922b10c10a65826228e42
Signed-off-by: Vevek Venkatesan <vevekv@codeaurora.org>
WCN3990 target uses more fields in htt rx descriptor.
Refactor htt rx descriptor to not break legacy code.
Remove last msdu check in htt rx for WCN3990 which is not required.
CRs-Fixed: 2005906
Change-Id: Id2f670ecd72ea898a11a9d9eea61b5a1f2364d32
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
This is the reference driver source code for ST
Touchscreen of version 4.1.0. It is used for QVR8998
touchscreen.
(cherry picked from commit 2cd09314337d614e69d0ebd99afb71d99d31b69a)
Signed-off-by: chenx <chenxiang0527@thundersoft.com>
Git-commit: 2cd09314337d614e69d0ebd99afb71d99d31b69a
Git-repo: https://source.codeaurora.org/quic/la/kernel/msm-3.10
CRs-Fixed: 1106217
Change-Id: I6674245402c0a5d6cca6bf82a9f8b1bf4f4f4ef3
Signed-off-by: Jin Fu <jinf@codeaurora.org>
Coresight ETR sink is enabled as the default sink to
collect traces.
Change-Id: I78cec888284307dbc7e696e7b33b45707bf9e1ca
Signed-off-by: Saranya Chidura <schidura@codeaurora.org>
Modify DCC RAM size for sdm660 and sdm630. DCC RAM is used to
store captured information locally in DCC.
Change-Id: Ib4c630e165e55b8ac82976e406069ee9e4d3f3c2
Signed-off-by: Saranya Chidura <schidura@codeaurora.org>
In case of PLL lock errors or the RCGR fails to update the new
configuration, add support to capture all the PLL and RCGR
configuration registers as part of kernel logs.
Change-Id: Ifb0cefafc30f8796ba17f2d388fb65ed41aae485
Signed-off-by: Taniya Das <tdas@codeaurora.org>
If the user-space client doesn't provide the pixel extension and qseed3
configuration, driver should set the default values. Change sets the
default values if user-space client is not configuring the blocks when
VIG pipes are selected.
CRs-Fixed:2002381
Change-Id: I02f0e76fb87587d2eed9e5f4fcca5baa7d605b92
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Signed-off-by: Manoj Kumar AVM <manojavm@codeaurora.org>
Fastmap feature is used in the cases where it required reduced time for
dma_map/unmap().
Change-Id: Ic1c1fd0bbd95d849eaf6ee13569e345117a988b6
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Currently the interrupt trigger type is configured as NONE. This
causes a level handler to be assigned to these interrupts.
However, all of them are edge triggered interrupts with varying
falling/rising/both edge flavors. Update the device tree to
use their correct trigger types thereby preventing missed interrupt
storms because of incorrect handler types.
Change-Id: I6b5cddc8281ca7f6810dcb754d7dd2e6ae6f339c
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Prevent concurrent usage & re-allocation of the wr_buf variable.
Based off patch by chengengjia <chengjia4574@gmail.com>.
BUG: 33001936
Change-Id: I88d78e1ec0fc9e88b1e6824c06161b67d01136ec
Signed-off-by: Andrew Chant <achant@google.com>
Git-commit: d740e7228bd1578ed01762998b2a86e7df56e608
Git-repo: https://android.googlesource.com/kernel/msm
Signed-off-by: Dennis Cagle <d-cagle@codeaurora.org>
Add support to configure battery thermal coefficients so that different
battery thermistors can be supported. These coefficients can be
configured via "qcom,battery-thermal-coefficients" device tree property.
CRs-Fixed: 2004461
Change-Id: Iff25acd397a68c31057dff4db1896d46e396adc6
Signed-off-by: Yingwei Zhao <cyizhao@codeaurora.org>
Add null check in firmware_direct_write to avoid null
pointer dereference due to firmware_abort.
Change-Id: Ibde30452bb6f3fe7a9f92aa3b1f2ed85a858d94e
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Check for NULL for irq descriptor to prevent deferencing an invalid
address. The qos value is then ignored as it cannot be associated with
the requested irq.
Change-Id: I82fdc9b10ffff89032a0f0e9dade42e4c670f4b9
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
SSR logic is executed during device shutdown. During device
shutdown the Linux tasks (processes) are moving to SIGKILL
state. If a DMA allocation from the kernel happens
in a context of a process in SIGKILL state and page migration
is needed, the allocation will fail.
Use GFP_ATOMIC allocation flag during SSR. This will
utilize the atomic memory pool and will not require page
migration.
CRs-fixed: 1077811
Change-Id: Ie06b85d1f9d0a230c3d3832b6f0bbcdefc520c1e
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
Signed-off-by: Utkarsh Saxena <usaxena@codeaurora.org>
Add support for 352800 sampling rates and 32 bps for the TDM.
Add support for PCM compress passthough mode with mixer controls.
CRs-fixed: 1116515
Change-Id: Iab059a5a6b6ce8f57717023467677a399a60032e
Signed-off-by: Josh Kirsch <jkirsch@codeaurora.org>
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
This module adds support for the Integrated WCN3990 WLAN
module, The ATH10k WCN3990 has integrated 802.11ac chipset
with SNOC bus interface.
The ATH10K is MAC80211 based driver, enable MAC80211 and
ATH10K core related kernel config flag for driver compilation.
CRs-Fixed: 2005603
Change-Id: Ie153688eabf29e8f33aee413750028147a94d9a2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Following list of changes have been made
1. Add the missing clocks in multimedia clock controller driver.
Also clean up clock flags and parent info for few clocks.
2. Removing clocks which are not controlled by HLOS.
3. MMCC needs to vote for volatge level on rail for the clock
frequencies, so add voltage voting in MMCC.
4. Initial rate configuration for MMPLLs.
Change-Id: If3d84e52783651b611b624dbc60b18993c0f0b1a
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Afe driver changes to query avtimer vs device drift.
Drift obtained can be used to pull the device pll so
that avtimer and device are in sync.
CRs-Fixed: 1112258
Change-Id: I4d4ddb0dbc06270553d583f266a44ddbe9412d1a
Signed-off-by: Manish Dewangan <manish@codeaurora.org>
io-pgtable-fast was implemented to achieve
better performance for IOMMU map/un-map. Add
DMA API support that goes through io-pgtable-fast
for 32 bit targets.
Change-Id:I3d0560a4331f6b7b87c70d0885df11d12cb1d6ec
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Add initial version of SDM630 GPU properties.
This is needed to support Graphics driver functionality
on SDM630 target.
Change-Id: I0442ed8dbb728adae36db8631eeba83c6425ea82
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Configure CPR4/h controllers to reset to default step_quot on each
loop_en = 0 transition. This enables the CPR controller to use the
default step_quot during a corner switch and then later switch to
the run-time calibrated step_quot. Without this feature enabled,
there is a chance for the CPR controller to use the run-time
calibrated step_quot of lower modes for higher modes that sometimes
can lead to closed-loop voltage getting stuck at open-loop voltage.
CRs-Fixed: 2003482
Change-Id: Ic738f6205a2e2030202abd811e94bd47240bad43
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
