Add support for TX path COPP calibration according to
app type configuration
CRs-fixed: 1015476
Change-Id: I0bcbfadb0c1a22529863a5c4b8cc5c53a1028915
Signed-off-by: Derek Chen <chenche@codeaurora.org>
start and end must be page aligned while calling
flush_tlb_kernel_range else the last page may get
missed while invalidation.
Change-Id: Ibaab202c47a475623e197a13191b2fed638ce20b
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
Correct the camera dtis place to support multiple chipset
version for msmcobalt skuk device.
Change-Id: I20e12bc1597ad15cb3dc9c3ef18d81d039931e07
Signed-off-by: Wei Ding <weiding@codeaurora.org>
The ramdump driver uses the device pointer during ramdump read.
This change passes in the device pointer for memshare during
ramdump create and moves the call to the probe function.
CRs-Fixed: 1079523
Change-Id: I687696dbedfa0ce7e6053d70291a7beb6f81f82e
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
Modify the clock_gcc dummy clock to use the real clock controller for all
global clock controller clients.
Change-Id: Iac989d3c9312654b599d8299206e5478ca454861
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Add IMEM PIL entry to save relocatable address of images
loaded by PIL.
Change-Id: I79acd047c7e414ed19a2f992f8ff801b63c8a2ad
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
This reverts 'commit 7112993181 ("input: touchscreen: synaptics v1.1")'
This change is not needed in 4.4 kernel.
Change-Id: I89ab8f353bc04bc0a04d5f5a6993e8e8e5ebbd2e
Signed-off-by: Abinaya P <abinayap@codeaurora.org>
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Currently, there is a delay of 20msec before raising OTG
current limit, which may be too long for some OTG devices and
cause unexpected issues.
Change it to 1ms or 2ms per HW timing.
Change-Id: Ie09a65e7974e2412af4add3b6f1e0aa20ee4a34b
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Add support to do initial configuration for alpha plls and votable
alpha PLLs need to have the fsm mode enabled as part of the
initialization using flag 'SUPPORTS_FSM_MODE'.
Alpha PLLs can support two kinds of input signals, normal and latched.
The normal input is directly passed to the core, while the latched input
requires a latch and acknowledge sequence to be performed for the
changed input to propagate.
Alpha PLLs can support dynamic update with both kind of input signals.
The ones which support this using a latched interface however need to
follow the latch/wait-for-ack sequence to be performed when the rate
changes. Mark these with a new flag 'SUPPORTS_DYNAMIC_UPDATE' to handle
this as part of clk_alpha_pll_set_rate().
PLLs could require post div to be set at runtime, add a vco_data which
could be used for these settings.
Change-Id: Ia0b9a2a52a3b33b7b68409c19c460d717eb5c1e2
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Set LAB's precharge time to max 500us to optimize the precharge
behavior as suggested in the hardware documentation.
CRs-Fixed: 1084297
Change-Id: I118f4254686caf498087847916b7710662ab31e7
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Currently, some properties in LABIBB regulator driver are having
prefix "qpnp" which is not reflecting the vendor. Change it to
"qcom" to reflect the vendor name correctly and also match with
other DT properties.
CRs-Fixed: 1071971
Change-Id: I182dddc29f3d7c7b449b56ac7fb84e74061cf3a4
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
