There could be instances where the RCG configuration update or readback
could fail. Notify the caller of the failure. Add support to change
scope of mux_div_get_src_div() in order to use it globally.
Change-Id: Ica07c28cede695785db81697effcb40ab6b717d4
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Pick proper app type for compressed input data port in
transcode loopback driver to support compressed input in
DSP loopback.
CRs-Fixed: 2061759
Change-Id: Ib2f66b467456787e08265a0da2bd85bb881a5d61
Signed-off-by: Siddartha Shaik <sshaik@codeaurora.org>
DSP loopback uses QUAT MI2S TX as source interface
so mixer control is updated for QUAT MI2S TX Format
to support compressed and pcm input data formats.
CRs-Fixed: 2061759
Change-Id: I8c283de767f938ae8f4e1180a9dffc79a1da7ff0
Signed-off-by: Siddartha Shaik <sshaik@codeaurora.org>
Maxim20010 buck regulator is used to provide the supply for
graphics rail. The programmable output voltage range is from
0.5V to 1.27V in 10mV steps.
CRs-Fixed: 2062515
Change-Id: I50d3fe4c89f412cda2b58b3f1f19086edcf10553
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Enable Maxim20010 external buck regulator driver to provide the supply
for graphics rail on msm8996-auto boards.
CRs-Fixed: 2062515
Change-Id: I1e70f16c660de6d3d2a8c138a34157538c19f0f1
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Add support to early mount vendor partition so that vendor modules
can be loaded during early init.
Change-Id: I2233f6c3b8eab180631ca0a0472b586b7ec854f1
Signed-off-by: Imran Khan <kimran@codeaurora.org>
Zero address is considered invalid address, hence changing
the secure domain mapping space to start from a
non-zero address
CRs-Fixed: 2053654
Change-Id: I27300845fb3839372bc38be1d322a7ad0cd0472d
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Add debugfs nodes to indicate source/sink
HDCP support and authentication state accurately
for DRM HDMI driver.
Change-Id: Ia947c97708c99f23b7b4f23bcad75529b155a42c
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add a utility function to dump HDMI core registers to
command line. This will facilitate debugging issues by
just calling this API wherever necessary.
Change-Id: I4a6727dca34edf4bb1c240adc7b93f50a7530b98
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Workaround to re-enable BMD while getting battery id was required
when driver is probing. This was done to mitigate driver probe
failures because of failed SRAM access. Getting battery_id from
RR_ADC driver itself takes ~200ms and re-enabling BMD takes 200ms
which increases driver probe time.
With the recent changes in reading batt_id channel from RR_ADC
driver, re-enabling BMD is not required anymore when the driver
probes. Hence move getting battery_id and battery profile to
profile_load_work. This way, there won't be any delay when the
driver probes.
CRs-Fixed: 2062261
Change-Id: Ifeb361e0f82fca65f9570fd1f425c7360445d01f
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
When getting power down setting, there is an untrusted pointer
from a user space pointer.Need to copy to the kernel space first.
Change-Id: I0c66e942453581caac5ea00a54a252840a32972f
CRs-Fixed: 2037398 2037403
Signed-off-by: Terence Ho <terenceh@codeaurora.org>
Use mutex lock before using queuing ioctls like
queuing, dequeing buffers to avoid race condition.
Change-Id: I59c70f2abe3daddf38761a2f17671d3d49f43989
CRs-fixed: 2038086
Signed-off-by: Terence Ho <terenceh@codeaurora.org>
UFS PA errors were observed during data read operation hence Hardware
programming guide have recommended setting QSERDES_RX1_UCDR_PI_CONTROLS
register to value 0x81 which will use CDR DIV4 in all bands and fastlock.
Change-Id: I456354b346aca7abfaa4839d538c5054c3e79fbf
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Remove KP and SY countries from regdb.
CRs-Fixed: 2062687
Change-Id: I41575e415844255d48d2f9e6deca20c1dc656d3c
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
It's possible for POR to fail and endpoint not enter correct reset
state. Add a timeout when waiting for MHI state BHI transition event
during firmware download.
CRs-Fixed: 2062442
Change-Id: I6af16ec1a514d50b9e984e3fb16696d23e605ba0
Signed-off-by: Sujeev Dias <sdias@codeaurora.org>
