commit b7bd98b7db9fc8fe19da1a5ff0215311c6b95e46 upstream.
Fix bad unlock balance: ep0_write enter with the locks locked from
inode.c:1769, hence it must exit with spinlock held to avoid double
unlock in dev_config.
Signed-off-by: David Eccher <d.eccher@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c3b674a04b8ab62a1d35e86714d466af0a0ecc18 ]
At some situations, the vbus may already be there before starting
gadget. So we need to check vbus event after switching to gadget in
order to handle missing vbus event. The typical use cases are plugging
vbus cable before driver load or the vbus has already been there
after stopping host but before starting gadget.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Tested-by: Stephen Boyd <stephen.boyd@linaro.org>
Reported-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cd8db057e93ddaacbec025b567490555d2bca280 ]
Make sure to detect short transfers when reading a device register.
The modem-status handling had sufficient error checks in place, but move
handling of short transfers into the register accessor function itself
for consistency.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0d130367abf582e7cbf60075c2a7ab53817b1d14 ]
Make sure to log an error on short transfers when reading a device
register.
Also clear the provided buffer (which if often an uninitialised
automatic variable) on errors as the driver currently does not bother to
check for errors.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=SSJQ
-----END PGP SIGNATURE-----
Merge 4.4.88 into android-4.4
Changes in 4.4.88
usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard
USB: serial: option: add support for D-Link DWM-157 C1
usb: Add device quirk for Logitech HD Pro Webcam C920-C
usb:xhci:Fix regression when ATI chipsets detected
USB: core: Avoid race of async_completed() w/ usbdev_release()
staging/rts5208: fix incorrect shift to extract upper nybble
driver core: bus: Fix a potential double free
intel_th: pci: Add Cannon Lake PCH-H support
intel_th: pci: Add Cannon Lake PCH-LP support
ath10k: fix memory leak in rx ring buffer allocation
Input: trackpoint - assume 3 buttons when buttons detection fails
rtlwifi: rtl_pci_probe: Fix fail path of _rtl_pci_find_adapter
Bluetooth: Add support of 13d3:3494 RTL8723BE device
dlm: avoid double-free on error path in dlm_device_{register,unregister}
mwifiex: correct channel stat buffer overflows
drm/nouveau/pci/msi: disable MSI on big-endian platforms by default
workqueue: Fix flag collision
cs5536: add support for IDE controller variant
scsi: sg: protect against races between mmap() and SG_SET_RESERVED_SIZE
scsi: sg: recheck MMAP_IO request length with lock held
drm: adv7511: really enable interrupts for EDID detection
drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled
drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
drm/bridge: adv7511: Re-write the i2c address before EDID probing
btrfs: resume qgroup rescan on rw remount
locktorture: Fix potential memory leak with rw lock test
ALSA: msnd: Optimize / harden DSP and MIDI loops
Bluetooth: Properly check L2CAP config option output buffer length
ARM: 8692/1: mm: abort uaccess retries upon fatal signal
NFS: Fix 2 use after free issues in the I/O code
xfs: XFS_IS_REALTIME_INODE() should be false if no rt device present
Linux 4.4.88
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit ed62ca2f4f51c17841ea39d98c0c409cb53a3e10 upstream.
While running reboot tests w/ a specific set of USB devices (and
slub_debug enabled), I found that once every few hours my device would
be crashed with a stack that looked like this:
[ 14.012445] BUG: spinlock bad magic on CPU#0, modprobe/2091
[ 14.012460] lock: 0xffffffc0cb055978, .magic: ffffffc0, .owner: cryption contexts: %lu/%lu
[ 14.012460] /1025536097, .owner_cpu: 0
[ 14.012466] CPU: 0 PID: 2091 Comm: modprobe Not tainted 4.4.79 #352
[ 14.012468] Hardware name: Google Kevin (DT)
[ 14.012471] Call trace:
[ 14.012483] [<....>] dump_backtrace+0x0/0x160
[ 14.012487] [<....>] show_stack+0x20/0x28
[ 14.012494] [<....>] dump_stack+0xb4/0xf0
[ 14.012500] [<....>] spin_dump+0x8c/0x98
[ 14.012504] [<....>] spin_bug+0x30/0x3c
[ 14.012508] [<....>] do_raw_spin_lock+0x40/0x164
[ 14.012515] [<....>] _raw_spin_lock_irqsave+0x64/0x74
[ 14.012521] [<....>] __wake_up+0x2c/0x60
[ 14.012528] [<....>] async_completed+0x2d0/0x300
[ 14.012534] [<....>] __usb_hcd_giveback_urb+0xc4/0x138
[ 14.012538] [<....>] usb_hcd_giveback_urb+0x54/0xf0
[ 14.012544] [<....>] xhci_irq+0x1314/0x1348
[ 14.012548] [<....>] usb_hcd_irq+0x40/0x50
[ 14.012553] [<....>] handle_irq_event_percpu+0x1b4/0x3f0
[ 14.012556] [<....>] handle_irq_event+0x4c/0x7c
[ 14.012561] [<....>] handle_fasteoi_irq+0x158/0x1c8
[ 14.012564] [<....>] generic_handle_irq+0x30/0x44
[ 14.012568] [<....>] __handle_domain_irq+0x90/0xbc
[ 14.012572] [<....>] gic_handle_irq+0xcc/0x18c
Investigation using kgdb() found that the wait queue that was passed
into wake_up() had been freed (it was filled with slub_debug poison).
I analyzed and instrumented the code and reproduced. My current
belief is that this is happening:
1. async_completed() is called (from IRQ). Moves "as" onto the
completed list.
2. On another CPU, proc_reapurbnonblock_compat() calls
async_getcompleted(). Blocks on spinlock.
3. async_completed() releases the lock; keeps running; gets blocked
midway through wake_up().
4. proc_reapurbnonblock_compat() => async_getcompleted() gets the
lock; removes "as" from completed list and frees it.
5. usbdev_release() is called. Frees "ps".
6. async_completed() finally continues running wake_up(). ...but
wake_up() has a pointer to the freed "ps".
The instrumentation that led me to believe this was based on adding
some trace_printk() calls in a select few functions and then using
kdb's "ftdump" at crash time. The trace follows (NOTE: in the trace
below I cheated a little bit and added a udelay(1000) in
async_completed() after releasing the spinlock because I wanted it to
trigger quicker):
<...>-2104 0d.h2 13759034us!: async_completed at start: as=ffffffc0cc638200
mtpd-2055 3.... 13759356us : async_getcompleted before spin_lock_irqsave
mtpd-2055 3d..1 13759362us : async_getcompleted after list_del_init: as=ffffffc0cc638200
mtpd-2055 3.... 13759371us+: proc_reapurbnonblock_compat: free_async(ffffffc0cc638200)
mtpd-2055 3.... 13759422us+: async_getcompleted before spin_lock_irqsave
mtpd-2055 3.... 13759479us : usbdev_release at start: ps=ffffffc0cc042080
mtpd-2055 3.... 13759487us : async_getcompleted before spin_lock_irqsave
mtpd-2055 3.... 13759497us!: usbdev_release after kfree(ps): ps=ffffffc0cc042080
<...>-2104 0d.h2 13760294us : async_completed before wake_up(): as=ffffffc0cc638200
To fix this problem we can just move the wake_up() under the ps->lock.
There should be no issues there that I'm aware of.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6b422b88b46353cf596e0db6dc0e39d50d90d6e upstream.
The following commit cause a regression on ATI chipsets.
'commit e788787ef4f9 ("usb:xhci:Add quirk for Certain
failing HP keyboard on reset after resume")'
This causes pinfo->smbus_dev to be wrongly set to NULL on
systems with the ATI chipset that this function checks for first.
Added conditional check for AMD chipsets to avoid the overwriting
pinfo->smbus_dev.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain
failing HP keyboard on reset after resume")
cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1279ef74eeeb5f627f091c71d80dd7ac766c99d upstream.
Commit e0429362ab
("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e")
introduced quirk to workaround an issue with some Logitech webcams.
Apparently model C920-C has the same issue so applying
the same quirk as well.
See aforementioned commit message for detailed explanation of the problem.
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de3af5bf259d7a0bfaac70441c8568ab5998d80c upstream.
Corsair Strafe RGB keyboard has trouble to initialize:
[ 1.679455] usb 3-6: new full-speed USB device number 4 using xhci_hcd
[ 6.871136] usb 3-6: unable to read config index 0 descriptor/all
[ 6.871138] usb 3-6: can't read configurations, error -110
[ 6.991019] usb 3-6: new full-speed USB device number 5 using xhci_hcd
[ 12.246642] usb 3-6: unable to read config index 0 descriptor/all
[ 12.246644] usb 3-6: can't read configurations, error -110
[ 12.366555] usb 3-6: new full-speed USB device number 6 using xhci_hcd
[ 17.622145] usb 3-6: unable to read config index 0 descriptor/all
[ 17.622147] usb 3-6: can't read configurations, error -110
[ 17.742093] usb 3-6: new full-speed USB device number 7 using xhci_hcd
[ 22.997715] usb 3-6: unable to read config index 0 descriptor/all
[ 22.997716] usb 3-6: can't read configurations, error -110
Although it may work after several times unpluging/pluging:
[ 68.195240] usb 3-6: new full-speed USB device number 11 using xhci_hcd
[ 68.337459] usb 3-6: New USB device found, idVendor=1b1c, idProduct=1b20
[ 68.337463] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 68.337466] usb 3-6: Product: Corsair STRAFE RGB Gaming Keyboard
[ 68.337468] usb 3-6: Manufacturer: Corsair
[ 68.337470] usb 3-6: SerialNumber: 0F013021AEB8046755A93ED3F5001941
Tried three quirks: USB_QUIRK_DELAY_INIT, USB_QUIRK_NO_LPM and
USB_QUIRK_DEVICE_QUALIFIER, user confirmed that USB_QUIRK_DELAY_INIT alone
can workaround this issue. Hence add the quirk for Corsair Strafe RGB.
BugLink: https://bugs.launchpad.net/bugs/1678477
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=JeJw
-----END PGP SIGNATURE-----
Merge 4.4.84 into android-4.4
Changes in 4.4.84
netfilter: nf_ct_ext: fix possible panic after nf_ct_extend_unregister
audit: Fix use after free in audit_remove_watch_rule()
parisc: pci memory bar assignment fails with 64bit kernels on dino/cujo
crypto: x86/sha1 - Fix reads beyond the number of blocks passed
Input: elan_i2c - add ELAN0608 to the ACPI table
Input: elan_i2c - Add antoher Lenovo ACPI ID for upcoming Lenovo NB
ALSA: seq: 2nd attempt at fixing race creating a queue
ALSA: usb-audio: Apply sample rate quirk to Sennheiser headset
ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devices
mm/mempolicy: fix use after free when calling get_mempolicy
mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base changes
xen: fix bio vec merging
x86/asm/64: Clear AC on NMI entries
irqchip/atmel-aic: Fix unbalanced of_node_put() in aic_common_irq_fixup()
irqchip/atmel-aic: Fix unbalanced refcount in aic_common_rtc_irq_fixup()
Sanitize 'move_pages()' permission checks
pids: make task_tgid_nr_ns() safe
perf/x86: Fix LBR related crashes on Intel Atom
usb: optimize acpi companion search for usb port devices
usb: qmi_wwan: add D-Link DWM-222 device ID
Linux 4.4.84
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit ed18c5fa945768a9bec994e786edbbbc7695acf6 upstream.
This optimization significantly reduces xhci driver load time.
In ACPI tables the acpi companion port devices are children of
the hub device. The port devices are identified by their port number
returned by the ACPI _ADR method.
_ADR 0 is reserved for the root hub device.
The current implementation to find a acpi companion port device
loops through all acpi port devices under that parent hub, evaluating
their _ADR method each time a new port device is added.
for a xHC controller with 25 ports under its roothub it
will end up invoking ACPI bytecode 625 times before all ports
are ready, making it really slow.
The _ADR values are already read and cached earler. So instead of
running the bytecode again we can check the cached _ADR value first,
and then fall back to the old way.
As one of the more significant changes, the xhci load time on
Intel kabylake reduced by 70%, (28ms) from
initcall xhci_pci_init+0x0/0x49 returned 0 after 39537 usecs
to
initcall xhci_pci_init+0x0/0x49 returned 0 after 11270 usecs
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the request->length is zero, a ZLP should already be sent due to that
and another ZLP is not needed to terminate the transfer.
(cherry-picked from commit
d9261898a4b2c143c28568dc686a1becfc637a99)
Fixes: 04c03d10e507 ("usb: dwc3: gadget: handle request->zero")
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Bug: 63867169
Change-Id: I97a1801c57dc169b6e9371d5aec599a14f316aff
So far, dwc3 has always missed request->zero
handling for every endpoint. Let's implement
that so we can handle cases where transfer must
be finished with a ZLP.
Note that dwc3 is a little special. Even though
we're dealing with a ZLP, we still need a buffer
of wMaxPacketSize bytes; to hide that detail from
every gadget driver, we have a preallocated buffer
of 1024 bytes (biggest bulk size) to use (and
share) among all endpoints.
(cherry-picked from commit
04c03d10e507052cfce6910ddf34091196e79e1c)
Reported-by: Ravi B <ravibabu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Bug: 63867169
Change-Id: Ied4093e92dd080f2d9dd1fd9aefb36406f66bb67
The req->complete seems to presist the callback pointer for
the control requests. This causes the serial of the accessory
to be overridden when an accessory function specific out
control request is issued right after the ACCESSORY_SEND_STRING
control request. Therefore, assign a no-op req complete function
when nothing needs to be done once the request is completed.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Bug: 63867169
Change-Id: I78c1602e9a044b8718b270b8a068cf5afc83f984
There's a race between usb_gadget_udc_stop() which is likely
to set the gadget driver to NULL in the udc driver and this drivers
gadget disconnect fn which likely checks for the gadget driver to
a null ptr. It happens that unbind (doing set_gadget_data(NULL))
is called before the gadget driver is set to NULL and the udc driver
calls disconnect fn which results in cdev being a null ptr.
As a workaround we check cdev in android_disconnect() to prevent
the following panic:
Unable to handle kernel NULL pointer dereference at virtual address 000000a8
pgd = ffffff800940a000
[000000a8] *pgd=00000000be1fe003, *pud=00000000be1fe003, *pmd=0000000000000000
Internal error: Oops: 96000046 [#1] PREEMPT SMP
CPU: 7 PID: 1134 Comm: kworker/u16:3 Tainted: G S 4.9.41-g75cd2a0231ea-dirty #4
Hardware name: HiKey960 (DT)
Workqueue: events_power_efficient event_work
task: ffffffc0b5f4f000 task.stack: ffffffc0b5b94000
PC is at android_disconnect+0x54/0xa4
LR is at android_disconnect+0x54/0xa4
pc : [<ffffff8008855938>] lr : [<ffffff8008855938>] pstate: 80000185
sp : ffffffc0b5b97bf0
x29: ffffffc0b5b97bf0 x28: 0000000000000003
x27: ffffffc0b5181c54 x26: ffffffc0b5181c68
x25: ffffff8008dc1000 x24: ffffffc0b5181d70
x23: ffffff8008dc18a0 x22: ffffffc0b5f5a018
x21: ffffffc0b5894ad8 x20: 0000000000000000
x19: ffffff8008ddaec8 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 00000000007c9ccd
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000000001
x9 : ffffff800930f1a8 x8 : ffffff800932a133
x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffffffc0b5b97a50 x4 : ffffffc0be19f090
x3 : 0000000000000000 x2 : ffffff80091ca000
x1 : 000000000000002f x0 : 000000000000002f
This happened on a hikey960 with the following backtrace:
[<ffffff8008855938>] android_disconnect+0x54/0xa4
[<ffffff80089def38>] dwc3_disconnect_gadget.part.19+0x114.888119]
[<ffffff80087f7d48>] dwc3_gadget_suspend+0x6c/0x70
[<ffffff80087ee674>] dwc3_suspend_device+0x58/0xa0
[<ffffff80087fb418>] dwc3_otg_work+0x214/0x474
[<ffffff80087fdc74>] event_work+0x3bc/0x5ac
[<ffffff80080e5d88>] process_one_work+0x14c/0x43c
[<ffffff80080e60d4>] worker_thread+0x5c/0x438
[<ffffff80080ece68>] kthread+0xec/0x100
[<ffffff8008083680>] ret_from_fork+0x10/0x50
dwc3_otg_work tries to handle a switch from host to device mode
and therefore calls disconnect on the gadget driver.
To reproduce the issue it is enaugh to enable tethering (rndis gadget),
unplug and plug in again the usb connector which causes the change
from device to host and back to device mode.
Signed-off-by: Danilo Krummrich <danilokrummrich@gmail.com>
-----BEGIN PGP SIGNATURE-----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=riD5
-----END PGP SIGNATURE-----
Merge 4.4.83 into android-4.4
Changes in 4.4.83
cpuset: fix a deadlock due to incomplete patching of cpusets_enabled()
mm: ratelimit PFNs busy info message
iscsi-target: fix memory leak in iscsit_setup_text_cmd()
iscsi-target: Fix iscsi_np reset hung task during parallel delete
fuse: initialize the flock flag in fuse_file on allocation
nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays
USB: serial: option: add D-Link DWM-222 device ID
USB: serial: cp210x: add support for Qivicon USB ZigBee dongle
USB: serial: pl2303: add new ATEN device id
usb: musb: fix tx fifo flush handling again
USB: hcd: Mark secondary HCD as dead if the primary one died
staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read
iio: accel: bmc150: Always restore device to normal mode after suspend-resume
iio: light: tsl2563: use correct event code
uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069
USB: Check for dropped connection before switching to full speed
usb: core: unlink urbs from the tail of the endpoint's urb_list
usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter
usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume
iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits
pnfs/blocklayout: require 64-bit sector_t
pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver
pinctrl: samsung: Remove bogus irq_[un]mask from resource management
Linux 4.4.83
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit e788787ef4f9c24aafefc480a8da5f92b914e5e6 upstream.
Certain HP keyboards would keep inputting a character automatically which
is the wake-up key after S3 resume
On some AMD platforms USB host fails to respond (by holding resume-K) to
USB device (an HP keyboard) resume request within 1ms (TURSM) and ensures
that resume is signaled for at least 20 ms (TDRSMDN), which is defined in
USB 2.0 spec. The result is that the keyboard is out of function.
In SNPS USB design, the host responds to the resume request only after
system gets back to S0 and the host gets to functional after the internal
HW restore operation that is more than 1 second after the initial resume
request from the USB device.
As a workaround for specific keyboard ID(HP Keyboards), applying port reset
after resume when the keyboard is plugged in.
Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7496cfe5431f21da5d27a8388c326397e3f0a5db upstream.
Moshi USB to Ethernet Adapter internally uses a Genesys Logic hub to
connect to Realtek r8153.
The Realtek r8153 ethernet does not work on the internal hub, no-lpm quirk
can make it work.
Since another r8153 dongle at my hand does not have the issue, so add
the quirk to the Genesys Logic hub instead.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2eac13624364db5b5e1666ae0bb3a4d36bc56b6e upstream.
While unlink an urb, if the urb has been programmed in the controller,
the controller driver might do some hw related actions to tear down the
urb.
Currently usb_hcd_flush_endpoint() passes each urb from the head of the
endpoint's urb_list to the controller driver, which could make the
controller driver think each urb has been programmed and take the
unnecessary actions for each urb.
This patch changes the behavior in usb_hcd_flush_endpoint() to pass the
urbs from the tail of the list, to avoid any unnecessary actions in an
controller driver.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94c43b9897abf4ea366ed4dba027494e080c7050 upstream.
Some buggy USB disk adapters disconnect and reconnect multiple times
during the enumeration procedure. This may lead to a device
connecting at full speed instead of high speed, because when the USB
stack sees that a device isn't able to enumerate at high speed, it
tries to hand the connection over to a full-speed companion
controller.
The logic for doing this is careful to check that the device is still
connected. But this check is inadequate if the device disconnects and
reconnects before the check is done. The symptom is that a device
works, but much more slowly than it is capable of operating.
The situation was made worse recently by commit 22547c4cc4fe ("usb:
hub: Wait for connection to be reestablished after port reset"), which
increases the delay following a reset before a disconnect is
recognized, thus giving the device more time to reconnect.
This patch makes the check more robust. If the device was
disconnected at any time during enumeration, we will now skip the
full-speed handover.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Zdenek Kabelac <zkabelac@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89f23d51defcb94a5026d4b5da13faf4e1150a6f upstream.
Similar to commit d595259fbb7a ("usb-storage: Add ignore-residue quirk for
Initio INIC-3619") for INIC-3169 in unusual_devs.h but INIC-3069 already
present in unusual_uas.h. Both in same controller IC family.
Issue is that MakeMKV fails during key exchange with installed bluray drive
with following error:
002004:0000 Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED'
occurred while issuing SCSI command AD010..080002400 to device 'SG:dev_11:0'
Signed-off-by: Alan Swanson <reiver@improbability.net>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd5a6a4fdaba150089af2afc220eae0fef74878a upstream.
Make usb_hc_died() clear the HCD_FLAG_RH_RUNNING flag for the shared
HCD and set HCD_FLAG_DEAD for it, in analogy with what is done for
the primary one.
Among other thigs, this prevents check_root_hub_suspended() from
returning -EBUSY for dead HCDs which helps to work around system
suspend issues in some situations.
This actually fixes occasional suspend failures on one of my test
machines.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45d73860530a14c608f410b91c6c341777bfa85d upstream.
commit 68fe05e2a4 ("usb: musb: fix tx fifo flush handling") drops the
1ms delay trying to solve the long disconnect time issue when
application queued many tx urbs. However, the 1ms delay is needed for
some use cases, for example, without the delay, reconnecting AR9271 WIFI
dongle no longer works if the connection is dropped from the AP.
So let's add back the 1ms delay in musb_h_tx_flush_fifo(), and solve the
long disconnect time problem with a separate patch for
usb_hcd_flush_endpoint().
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b6bcd3d093c698d32e93d4da57679b8fbc5e01e upstream.
This adds a new ATEN device id for a new pl2303-based device.
Reported-by: Peter Kuo <PeterKuo@aten.com.tw>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9585e340db9f6cc1c0928d82c3a23cc4460f0a3f upstream.
The German Telekom offers a ZigBee USB Stick under the brand name Qivicon
for their SmartHome Home Base in its 1. Generation. The productId is not
known by the according kernel module, this patch adds support for it.
Signed-off-by: Stefan Triller <github@stefantriller.de>
Reviewed-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=l+tE
-----END PGP SIGNATURE-----
Merge 4.4.80 into android-4.4
Changes in 4.4.80
af_key: Add lock to key dump
pstore: Make spinlock per zone instead of global
net: reduce skb_warn_bad_offload() noise
powerpc/pseries: Fix of_node_put() underflow during reconfig remove
crypto: authencesn - Fix digest_null crash
md/raid5: add thread_group worker async_tx_issue_pending_all
drm/vmwgfx: Fix gcc-7.1.1 warning
drm/nouveau/bar/gf100: fix access to upper half of BAR2
KVM: PPC: Book3S HV: Context-switch EBB registers properly
KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exit
KVM: PPC: Book3S HV: Reload HTM registers explicitly
KVM: PPC: Book3S HV: Save/restore host values of debug registers
Revert "powerpc/numa: Fix percpu allocations to be NUMA aware"
Staging: comedi: comedi_fops: Avoid orphaned proc entry
drm/rcar: Nuke preclose hook
drm: rcar-du: Perform initialization/cleanup at probe/remove time
drm: rcar-du: Simplify and fix probe error handling
perf intel-pt: Fix ip compression
perf intel-pt: Fix last_ip usage
perf intel-pt: Use FUP always when scanning for an IP
perf intel-pt: Ensure never to set 'last_ip' when packet 'count' is zero
xfs: don't BUG() on mixed direct and mapped I/O
nfc: fdp: fix NULL pointer dereference
net: phy: Do not perform software reset for Generic PHY
isdn: Fix a sleep-in-atomic bug
isdn/i4l: fix buffer overflow
ath10k: fix null deref on wmi-tlv when trying spectral scan
wil6210: fix deadlock when using fw_no_recovery option
mailbox: always wait in mbox_send_message for blocking Tx mode
mailbox: skip complete wait event if timer expired
mailbox: handle empty message in tx_tick
mpt3sas: Don't overreach ioc->reply_post[] during initialization
kaweth: fix firmware download
kaweth: fix oops upon failed memory allocation
sched/cgroup: Move sched_online_group() back into css_online() to fix crash
PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
RDMA/uverbs: Fix the check for port number
libnvdimm, btt: fix btt_rw_page not returning errors
ipmi/watchdog: fix watchdog timeout set on reboot
dentry name snapshots
v4l: s5c73m3: fix negation operator
Make file credentials available to the seqfile interfaces
/proc/iomem: only expose physical resource addresses to privileged users
vlan: Propagate MAC address to VLANs
pstore: Allow prz to control need for locking
pstore: Correctly initialize spinlock and flags
pstore: Use dynamic spinlock initializer
net: skb_needs_check() accepts CHECKSUM_NONE for tx
sched/cputime: Fix prev steal time accouting during CPU hotplug
xen/blkback: don't free be structure too early
xen/blkback: don't use xen_blkif_get() in xen-blkback kthread
tpm: fix a kernel memory leak in tpm-sysfs.c
tpm: Replace device number bitmap with IDR
x86/mce/AMD: Make the init code more robust
r8169: add support for RTL8168 series add-on card.
ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flags
ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output
net/mlx4: Remove BUG_ON from ICM allocation routine
drm/msm: Ensure that the hardware write pointer is valid
drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set
vfio-pci: use 32-bit comparisons for register address for gcc-4.5
irqchip/keystone: Fix "scheduling while atomic" on rt
ASoC: tlv320aic3x: Mark the RESET register as volatile
spi: dw: Make debugfs name unique between instances
ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL
irqchip/mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
openrisc: Add _text symbol to fix ksym build error
dmaengine: ioatdma: Add Skylake PCI Dev ID
dmaengine: ioatdma: workaround SKX ioatdma version
dmaengine: ti-dma-crossbar: Add some 'of_node_put()' in error path.
ARM64: zynqmp: Fix W=1 dtc 1.4 warnings
ARM64: zynqmp: Fix i2c node's compatible string
ARM: s3c2410_defconfig: Fix invalid values for NF_CT_PROTO_*
ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
usb: gadget: Fix copy/pasted error message
Btrfs: adjust outstanding_extents counter properly when dio write is split
tools lib traceevent: Fix prev/next_prio for deadline tasks
xfrm: Don't use sk_family for socket policy lookups
perf tools: Install tools/lib/traceevent plugins with install-bin
perf symbols: Robustify reading of build-id from sysfs
video: fbdev: cobalt_lcdfb: Handle return NULL error from devm_ioremap
vfio-pci: Handle error from pci_iomap
arm64: mm: fix show_pte KERN_CONT fallout
nvmem: imx-ocotp: Fix wrong register size
sh_eth: enable RX descriptor word 0 shift on SH7734
ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion
HID: ignore Petzl USB headlamp
scsi: fnic: Avoid sending reset to firmware when another reset is in progress
scsi: snic: Return error code on memory allocation failure
ASoC: dpcm: Avoid putting stream state to STOP when FE stream is paused
Linux 4.4.80
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 43aef5c2ca90535b3227e97e71604291875444ed ]
This fixes an error message that was probably copied and pasted. The same
message is used for both the in and out endpoints, so it makes it impossible
to know which one actually failed because both cases say "IN".
Make the out endpoint error message say "OUT".
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=C1VH
-----END PGP SIGNATURE-----
Merge 4.4.79 into android-4.4
Changes in 4.4.79
disable new gcc-7.1.1 warnings for now
ir-core: fix gcc-7 warning on bool arithmetic
s5p-jpeg: don't return a random width/height
thermal: cpu_cooling: Avoid accessing potentially freed structures
ath9k: fix tx99 use after free
ath9k: fix tx99 bus error
NFC: fix broken device allocation
NFC: nfcmrvl_uart: add missing tty-device sanity check
NFC: nfcmrvl: do not use device-managed resources
NFC: nfcmrvl: use nfc-device for firmware download
NFC: nfcmrvl: fix firmware-management initialisation
nfc: Ensure presence of required attributes in the activate_target handler
nfc: Fix the sockaddr length sanitization in llcp_sock_connect
NFC: Add sockaddr length checks before accessing sa_family in bind handlers
perf intel-pt: Move decoder error setting into one condition
perf intel-pt: Improve sample timestamp
perf intel-pt: Fix missing stack clear
perf intel-pt: Ensure IP is zero when state is INTEL_PT_STATE_NO_IP
perf intel-pt: Clear FUP flag on error
Bluetooth: use constant time memory comparison for secret values
wlcore: fix 64K page support
ASoC: compress: Derive substream from stream based on direction
PM / Domains: Fix unsafe iteration over modified list of device links
PM / Domains: Fix unsafe iteration over modified list of domain providers
scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails.
iscsi-target: Add login_keys_workaround attribute for non RFC initiators
powerpc/64: Fix atomic64_inc_not_zero() to return an int
powerpc: Fix emulation of mcrf in emulate_step()
powerpc: Fix emulation of mfocrf in emulate_step()
powerpc/asm: Mark cr0 as clobbered in mftb()
af_key: Fix sadb_x_ipsecrequest parsing
PCI/PM: Restore the status of PCI devices across hibernation
ipvs: SNAT packet replies only for NATed connections
xhci: fix 20000ms port resume timeout
xhci: Fix NULL pointer dereference when cleaning up streams for removed host
usb: storage: return on error to avoid a null pointer dereference
USB: cdc-acm: add device-id for quirky printer
usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL
usb: renesas_usbhs: gadget: disable all eps when the driver stops
md: don't use flush_signals in userspace processes
x86/xen: allow userspace access during hypercalls
cx88: Fix regression in initial video standard setting
Raid5 should update rdev->sectors after reshape
s390/syscalls: Fix out of bounds arguments access
drm/amd/amdgpu: Return error if initiating read out of range on vram
drm/radeon/ci: disable mclk switching for high refresh rates (v2)
drm/radeon: Fix eDP for single-display iMac10,1 (v2)
ipmi: use rcu lock around call to intf->handlers->sender()
ipmi:ssif: Add missing unlock in error branch
f2fs: Don't clear SGID when inheriting ACLs
vfio: Fix group release deadlock
vfio: New external user group/file match
ftrace: Fix uninitialized variable in match_records()
MIPS: Fix mips_atomic_set() retry condition
MIPS: Fix mips_atomic_set() with EVA
MIPS: Negate error syscall return in trace
x86/acpi: Prevent out of bound access caused by broken ACPI tables
x86/ioapic: Pass the correct data to unmask_ioapic_irq()
MIPS: Fix MIPS I ISA /proc/cpuinfo reporting
MIPS: Save static registers before sysmips
MIPS: Actually decode JALX in `__compute_return_epc_for_insn'
MIPS: Fix unaligned PC interpretation in `compute_return_epc'
MIPS: math-emu: Prevent wrong ISA mode instruction emulation
MIPS: Send SIGILL for BPOSGE32 in `__compute_return_epc_for_insn'
MIPS: Rename `sigill_r6' to `sigill_r2r6' in `__compute_return_epc_for_insn'
MIPS: Send SIGILL for linked branches in `__compute_return_epc_for_insn'
MIPS: Fix a typo: s/preset/present/ in r2-to-r6 emulation error message
Input: i8042 - fix crash at boot time
NFS: only invalidate dentrys that are clearly invalid.
udf: Fix deadlock between writeback and udf_setsize()
target: Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce
perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
Revert "perf/core: Drop kernel samples even though :u is specified"
staging: rtl8188eu: add TL-WN722N v2 support
ceph: fix race in concurrent readdir
RDMA/core: Initialize port_num in qp_attr
drm/mst: Fix error handling during MST sideband message reception
drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req()
drm/mst: Avoid processing partially received up/down message transactions
of: device: Export of_device_{get_modalias, uvent_modalias} to modules
spmi: Include OF based modalias in device uevent
tracing: Fix kmemleak in instance_rmdir
alarmtimer: don't rate limit one-shot timers
Linux 4.4.79
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit b8b9c974afee685789fcbb191b52d1790be3608c upstream.
A gadget driver will not disable eps immediately when ->disconnect()
is called. But, since this driver assumes all eps stop after
the ->disconnect(), unexpected behavior happens (especially in system
suspend).
So, this patch disables all eps in usbhsg_try_stop(). After disabling
eps by renesas_usbhs driver, since some functions will be called by
both a gadget and renesas_usbhs driver, renesas_usbhs driver should
protect uep->pipe. To protect uep->pipe easily, this patch adds a new
lock in struct usbhsg_uep.
Fixes: 2f98382dc ("usb: renesas_usbhs: Add Renesas USBHS Gadget")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59a0879a0e17b2e43ecdc5e3299da85b8410d7ce upstream.
This patch fixes an issue that some registers may be not initialized
after resume if the USBHSF_RUNTIME_PWCTRL is not set. Otherwise,
if a cable is not connected, the driver will not enable INTENB0.VBSE
after resume. And then, the driver cannot detect the VBUS.
Fixes: ca8a282a53 ("usb: gadget: renesas_usbhs: add suspend/resume support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 446230f52a5bef593554510302465eabab45a372 upstream.
When us->extra is null the driver is not initialized, however, a
later call to osd200_scsi_to_ata is made that dereferences
us->extra, causing a null pointer dereference. The code
currently detects and reports that the driver is not initialized;
add a return to avoid the subsequent dereference issue in this
check.
Thanks to Alan Stern for pointing out that srb->result needs setting
to DID_ERROR << 16
Detected by CoverityScan, CID#100308 ("Dereference after null check")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b895868bb2da60a386a17cde3bf9ecbc70c79f4 upstream.
This off by one in stream_id indexing caused NULL pointer dereference and
soft lockup on machines with USB attached SCSI devices connected to a
hotpluggable xhci controller.
The code that cleans up pending URBs for dead hosts tried to dereference
a stream ring at the invalid stream_id 0.
ep->stream_info->stream_rings[0] doesn't point to a ring.
Start looping stream_id from 1 like in all the other places in the driver,
and check that the ring exists before trying to kill URBs on it.
Reported-by: rocko r <rockorequin@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a54408d0a004757789863d74e29c2297edae0b4d upstream.
A uncleared PLC (port link change) bit will prevent furuther port event
interrupts for that port. Leaving it uncleared caused get_port_status()
to timeout after 20000ms while waiting to get the final port event
interrupt for resume -> U0 state change.
This is a targeted fix for a specific case where we get a port resume event
racing with xhci resume. The port event interrupt handler notices xHC is
not yet running and bails out early, leaving PLC uncleared.
The whole xhci port resuming needs more attention, but while working on it
it anyways makes sense to always ensure PLC is cleared in get_port_status
before setting a new link state and waiting for its completion.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=oeNk
-----END PGP SIGNATURE-----
Merge 4.4.77 into android-4.4
Changes in 4.4.77
fs: add a VALID_OPEN_FLAGS
fs: completely ignore unknown open flags
driver core: platform: fix race condition with driver_override
bgmac: reset & enable Ethernet core before using it
mm: fix classzone_idx underflow in shrink_zones()
tracing/kprobes: Allow to create probe with a module name starting with a digit
drm/virtio: don't leak bo on drm_gem_object_init failure
usb: dwc3: replace %p with %pK
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
Add USB quirk for HVR-950q to avoid intermittent device resets
usb: usbip: set buffer pointers to NULL after free
usb: Fix typo in the definition of Endpoint[out]Request
mac80211_hwsim: Replace bogus hrtimer clockid
sysctl: don't print negative flag for proc_douintvec
sysctl: report EINVAL if value is larger than UINT_MAX for proc_douintvec
pinctrl: sh-pfc: r8a7791: Fix SCIF2 pinmux data
pinctrl: meson: meson8b: fix the NAND DQS pins
pinctrl: sunxi: Fix SPDIF function name for A83T
pinctrl: mxs: atomically switch mux and drive strength config
pinctrl: sh-pfc: Update info pointer after SoC-specific init
USB: serial: option: add two Longcheer device ids
USB: serial: qcserial: new Sierra Wireless EM7305 device ID
gfs2: Fix glock rhashtable rcu bug
x86/tools: Fix gcc-7 warning in relocs.c
x86/uaccess: Optimize copy_user_enhanced_fast_string() for short strings
ath10k: override CE5 config for QCA9377
KEYS: Fix an error code in request_master_key()
RDMA/uverbs: Check port number supplied by user verbs cmds
mqueue: fix a use-after-free in sys_mq_notify()
tools include: Add a __fallthrough statement
tools string: Use __fallthrough in perf_atoll()
tools strfilter: Use __fallthrough
perf top: Use __fallthrough
perf intel-pt: Use __fallthrough
perf thread_map: Correctly size buffer used with dirent->dt_name
perf scripting perl: Fix compile error with some perl5 versions
perf tests: Avoid possible truncation with dirent->d_name + snprintf
perf bench numa: Avoid possible truncation when using snprintf()
perf tools: Use readdir() instead of deprecated readdir_r()
perf thread_map: Use readdir() instead of deprecated readdir_r()
perf script: Use readdir() instead of deprecated readdir_r()
perf tools: Remove duplicate const qualifier
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf pmu: Fix misleadingly indented assignment (whitespace)
perf dwarf: Guard !x86_64 definitions under #ifdef else clause
perf trace: Do not process PERF_RECORD_LOST twice
perf tests: Remove wrong semicolon in while loop in CQM test
perf tools: Use readdir() instead of deprecated readdir_r() again
md: fix incorrect use of lexx_to_cpu in does_sb_need_changing
md: fix super_offset endianness in super_1_rdev_size_change
tcp: fix tcp_mark_head_lost to check skb len before fragmenting
staging: vt6556: vnt_start Fix missing call to vnt_key_init_table.
staging: comedi: fix clean-up of comedi_class in comedi_init()
ext4: check return value of kstrtoull correctly in reserved_clusters_store
x86/mm/pat: Don't report PAT on CPUs that don't support it
saa7134: fix warm Medion 7134 EEPROM read
Linux 4.4.77
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 996fab55d864ed604158f71724ff52db1c2454a3 upstream.
A new Sierra Wireless EM7305 device ID used in a Toshiba laptop.
Reported-by: Petr Kloc <petr_kloc@yahoo.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3b51417d0af63fb9a06662dc292200aed9ea53f upstream.
The usbip stack dynamically allocates the transfer_buffer and
setup_packet of each urb that got generated by the tcp to usb stub code.
As these pointers are always used only once we will set them to NULL
after use. This is done likewise to the free_urb code in vudc_dev.c.
This patch fixes double kfree situations where the usbip remote side
added the URB_FREE_BUFFER.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6836796de4019944f4ba4c99a360e8250fd2e735 upstream.
The USB core and sysfs will attempt to enumerate certain parameters
which are unsupported by the au0828 - causing inconsistent behavior
and sometimes causing the chip to reset. Avoid making these calls.
This problem manifested as intermittent cases where the au8522 would
be reset on analog video startup, in particular when starting up ALSA
audio streaming in parallel - the sysfs entries created by
snd-usb-audio on streaming startup would result in unsupported control
messages being sent during tuning which would put the chip into an
unknown state.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd90f73a9925f248d696bde1cfc836d9fda5570d upstream.
Added the USB serial device ID for the CEL ZigBee EM3588
radio stick.
Signed-off-by: Jeremie Rapin <rapinj@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04fb365c453e14ff9e8a28f1c46050d920a27a4a upstream.
%p will leak kernel pointers, so let's not expose the information on
dmesg and instead use %pK. %pK will only show the actual addresses if
explicitly enabled under /proc/sys/kernel/kptr_restrict.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=Dwzp
-----END PGP SIGNATURE-----
Merge 4.4.75 into android-4.4
Changes in 4.4.75
fs/exec.c: account for argv/envp pointers
autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL
lib/cmdline.c: fix get_options() overflow while parsing ranges
KVM: PPC: Book3S HV: Preserve userspace HTM state properly
CIFS: Improve readdir verbosity
HID: Add quirk for Dell PIXART OEM mouse
signal: Only reschedule timers on signals timers have sent
powerpc/kprobes: Pause function_graph tracing during jprobes handling
Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
time: Fix clock->read(clock) race around clocksource changes
target: Fix kref->refcount underflow in transport_cmd_finish_abort
iscsi-target: Reject immediate data underflow larger than SCSI transfer length
drm/radeon: add a PX quirk for another K53TK variant
drm/radeon: add a quirk for Toshiba Satellite L20-183
drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating
drm/amdgpu: adjust default display clock
USB: usbip: fix nonconforming hub descriptor
rxrpc: Fix several cases where a padded len isn't checked in ticket decode
of: Add check to of_scan_flat_dt() before accessing initial_boot_params
mtd: spi-nor: fix spansion quad enable
powerpc/slb: Force a full SLB flush when we insert for a bad EA
usb: gadget: f_fs: avoid out of bounds access on comp_desc
net: phy: Initialize mdio clock at probe function
net: phy: fix marvell phy status reading
nvme/quirk: Add a delay before checking for adapter readiness
nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too
Linux 4.4.75
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit b7f73850bb4fac1e2209a4dd5e636d39be92f42c upstream.
Companion descriptor is only used for SuperSpeed endpoints,
if the endpoints are HighSpeed or FullSpeed, the Companion
descriptor will not allocated, so we can only access it if
gadget is SuperSpeed.
I can reproduce this issue on Rockchip platform rk3368 SoC
which supports USB 2.0, and use functionfs for ADB. Kernel
build with CONFIG_KASAN=y and CONFIG_SLUB_DEBUG=y report
the following BUG:
==================================================================
BUG: KASAN: slab-out-of-bounds in ffs_func_set_alt+0x224/0x3a0 at addr ffffffc0601f6509
Read of size 1 by task swapper/0/0
============================================================================
BUG kmalloc-256 (Not tainted): kasan: bad access detected
----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Allocated in ffs_func_bind+0x52c/0x99c age=1275 cpu=0 pid=1
alloc_debug_processing+0x128/0x17c
___slab_alloc.constprop.58+0x50c/0x610
__slab_alloc.isra.55.constprop.57+0x24/0x34
__kmalloc+0xe0/0x250
ffs_func_bind+0x52c/0x99c
usb_add_function+0xd8/0x1d4
configfs_composite_bind+0x48c/0x570
udc_bind_to_driver+0x6c/0x170
usb_udc_attach_driver+0xa4/0xd0
gadget_dev_desc_UDC_store+0xcc/0x118
configfs_write_file+0x1a0/0x1f8
__vfs_write+0x64/0x174
vfs_write+0xe4/0x200
SyS_write+0x68/0xc8
el0_svc_naked+0x24/0x28
INFO: Freed in inode_doinit_with_dentry+0x3f0/0x7c4 age=1275 cpu=7 pid=247
...
Call trace:
[<ffffff900808aab4>] dump_backtrace+0x0/0x230
[<ffffff900808acf8>] show_stack+0x14/0x1c
[<ffffff90084ad420>] dump_stack+0xa0/0xc8
[<ffffff90082157cc>] print_trailer+0x188/0x198
[<ffffff9008215948>] object_err+0x3c/0x4c
[<ffffff900821b5ac>] kasan_report+0x324/0x4dc
[<ffffff900821aa38>] __asan_load1+0x24/0x50
[<ffffff90089eb750>] ffs_func_set_alt+0x224/0x3a0
[<ffffff90089d3760>] composite_setup+0xdcc/0x1ac8
[<ffffff90089d7394>] android_setup+0x124/0x1a0
[<ffffff90089acd18>] _setup+0x54/0x74
[<ffffff90089b6b98>] handle_ep0+0x3288/0x4390
[<ffffff90089b9b44>] dwc_otg_pcd_handle_out_ep_intr+0x14dc/0x2ae4
[<ffffff90089be85c>] dwc_otg_pcd_handle_intr+0x1ec/0x298
[<ffffff90089ad680>] dwc_otg_pcd_irq+0x10/0x20
[<ffffff9008116328>] handle_irq_event_percpu+0x124/0x3ac
[<ffffff9008116610>] handle_irq_event+0x60/0xa0
[<ffffff900811af30>] handle_fasteoi_irq+0x10c/0x1d4
[<ffffff9008115568>] generic_handle_irq+0x30/0x40
[<ffffff90081159b4>] __handle_domain_irq+0xac/0xdc
[<ffffff9008080e9c>] gic_handle_irq+0x64/0xa4
...
Memory state around the buggy address:
ffffffc0601f6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0601f6480: 00 00 00 00 00 00 00 00 00 00 06 fc fc fc fc fc
>ffffffc0601f6500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffffc0601f6580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffffc0601f6600: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Jerry Zhang <zhangjerry@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec963b412a54aac8e527708ecad06a6988a86fb4 upstream.
Fix up the root-hub descriptor to accommodate the variable-length
DeviceRemovable and PortPwrCtrlMask fields, while marking all ports as
removable (and leaving the reserved bit zero unset).
Also add a build-time constraint on VHCI_HC_PORTS which must never be
greater than USB_MAXCHILDREN (but this was only enforced through a
KConfig constant).
This specifically fixes the descriptor layout whenever VHCI_HC_PORTS is
greater than seven (default is 8).
Fixes: 04679b3489 ("Staging: USB/IP: add client driver")
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
[ johan: backport to v4.4, which uses VHCI_NPORTS ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=zl9i
-----END PGP SIGNATURE-----
Merge 4.4.74 into android-4.4
Changes in 4.4.74
configfs: Fix race between create_link and configfs_rmdir
can: gs_usb: fix memory leak in gs_cmd_reset()
cpufreq: conservative: Allow down_threshold to take values from 1 to 10
vb2: Fix an off by one error in 'vb2_plane_vaddr'
mac80211: don't look at the PM bit of BAR frames
mac80211/wpa: use constant time memory comparison for MACs
mac80211: fix CSA in IBSS mode
mac80211: fix IBSS presp allocation size
serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'
x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init()
mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
staging: rtl8188eu: prevent an underflow in rtw_check_beacon_data()
iio: proximity: as3935: recalibrate RCO after resume
USB: hub: fix SS max number of ports
usb: core: fix potential memory leak in error path during hcd creation
pvrusb2: reduce stack usage pvr2_eeprom_analyze()
USB: gadget: dummy_hcd: fix hub-descriptor removable fields
usb: r8a66597-hcd: select a different endpoint on timeout
usb: r8a66597-hcd: decrease timeout
drivers/misc/c2port/c2port-duramar2150.c: checking for NULL instead of IS_ERR()
usb: xhci: ASMedia ASM1042A chipset need shorts TX quirk
USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks
mm/memory-failure.c: use compound_head() flags for huge pages
swap: cond_resched in swap_cgroup_prepare()
genirq: Release resources in __setup_irq() error path
alarmtimer: Prevent overflow of relative timers
usb: dwc3: exynos fix axius clock error path to do cleanup
MIPS: Fix bnezc/jialc return address calculation
alarmtimer: Rate limit periodic intervals
mm: larger stack guard gap, between vmas
Allow stack to grow up to address space limit
mm: fix new crash in unmapped_area_topdown()
Linux 4.4.74
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Companion descriptor is only used for SuperSpeed endpoints,
if the endpoints are HighSpeed or FullSpeed, the Companion
descriptor will not allocated, so we can only access it if
gadget is SuperSpeed.
I can reproduce this issue on Rockchip platform rk3368 SoC
which supports USB 2.0, and use functionfs for ADB. Kernel
build with CONFIG_KASAN=y and CONFIG_SLUB_DEBUG=y report
the following BUG:
==================================================================
BUG: KASAN: slab-out-of-bounds in ffs_func_set_alt+0x224/0x3a0 at addr ffffffc0601f6509
Read of size 1 by task swapper/0/0
============================================================================
BUG kmalloc-256 (Not tainted): kasan: bad access detected
----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Allocated in ffs_func_bind+0x52c/0x99c age=1275 cpu=0 pid=1
alloc_debug_processing+0x128/0x17c
___slab_alloc.constprop.58+0x50c/0x610
__slab_alloc.isra.55.constprop.57+0x24/0x34
__kmalloc+0xe0/0x250
ffs_func_bind+0x52c/0x99c
usb_add_function+0xd8/0x1d4
configfs_composite_bind+0x48c/0x570
udc_bind_to_driver+0x6c/0x170
usb_udc_attach_driver+0xa4/0xd0
gadget_dev_desc_UDC_store+0xcc/0x118
configfs_write_file+0x1a0/0x1f8
__vfs_write+0x64/0x174
vfs_write+0xe4/0x200
SyS_write+0x68/0xc8
el0_svc_naked+0x24/0x28
INFO: Freed in inode_doinit_with_dentry+0x3f0/0x7c4 age=1275 cpu=7 pid=247
...
Call trace:
[<ffffff900808aab4>] dump_backtrace+0x0/0x230
[<ffffff900808acf8>] show_stack+0x14/0x1c
[<ffffff90084ad420>] dump_stack+0xa0/0xc8
[<ffffff90082157cc>] print_trailer+0x188/0x198
[<ffffff9008215948>] object_err+0x3c/0x4c
[<ffffff900821b5ac>] kasan_report+0x324/0x4dc
[<ffffff900821aa38>] __asan_load1+0x24/0x50
[<ffffff90089eb750>] ffs_func_set_alt+0x224/0x3a0
[<ffffff90089d3760>] composite_setup+0xdcc/0x1ac8
[<ffffff90089d7394>] android_setup+0x124/0x1a0
[<ffffff90089acd18>] _setup+0x54/0x74
[<ffffff90089b6b98>] handle_ep0+0x3288/0x4390
[<ffffff90089b9b44>] dwc_otg_pcd_handle_out_ep_intr+0x14dc/0x2ae4
[<ffffff90089be85c>] dwc_otg_pcd_handle_intr+0x1ec/0x298
[<ffffff90089ad680>] dwc_otg_pcd_irq+0x10/0x20
[<ffffff9008116328>] handle_irq_event_percpu+0x124/0x3ac
[<ffffff9008116610>] handle_irq_event+0x60/0xa0
[<ffffff900811af30>] handle_fasteoi_irq+0x10c/0x1d4
[<ffffff9008115568>] generic_handle_irq+0x30/0x40
[<ffffff90081159b4>] __handle_domain_irq+0xac/0xdc
[<ffffff9008080e9c>] gic_handle_irq+0x64/0xa4
...
Memory state around the buggy address:
ffffffc0601f6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0601f6480: 00 00 00 00 00 00 00 00 00 00 06 fc fc fc fc fc
>ffffffc0601f6500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffffc0601f6580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffffc0601f6600: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
(cherry picked from commit b7f73850bb4fac1e2209a4dd5e636d39be92f42c)
Signed-off-by: Jerry Zhang <zhangjerry@google.com>
Signed-off-by: Jerry Zhang <zhangjerry@google.com>
