Implement several IOCTLs to allow IPA user space work.
Change-Id: I726f665ada12c5524dabeab1b89cdc8db4dc6f1e
Acked-by: Dmitry Kogan <dmitryk@qti.qualcomm.com>
Signed-off-by: Amir Levy <alevy@codeaurora.org>
Add the changes to support the 1080p truly panel as default panel
for SDM636.
Change-Id: Ia6d9b26fb7efb1d8ed362da42e3b6f22798f6f5e
Signed-off-by: Rashi Bindra <rbindra@codeaurora.org>
spcom expose "pseudo file" char-device to user space.
The file operation callback function definition is using size_t for user
buffer size.
The spcom API uses uint32 as the spcom communication buffers are about
300 bytes, and the user space file operation read()/write() are limited to
PAGE_SIZE which is about 4KB.
Use explicit casting rather than implicit casting when fops callbacks
calls spcom internal functions.
CRs-Fixed: 2025174
Change-Id: I5d6bf71ab77f97ea350178bb8b3473fd4cefddfd
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
This reverts commit e4f6002702 ("f2fs: sanity check segment
count"). This change was already present and the new commit
added a redundant declaration for F2FS_MAX_SEGMENT.
Change-Id: Ie9a1d2b255fb20fcf2d4237e661430a39d8626ef
Signed-off-by: Dennis Cagle <dcagle@codeaurora.org>
Initialize the has_locked member before running SSR
spinlock test to ensure consistent results.
CRs-Fixed: 2091946
Change-Id: Ifad37541a94668b496aa9204dc80920b9a7ff244
Signed-off-by: Chris Lew <clew@codeaurora.org>
In case memory pools are supported return the page size as
supported only if corresponding memory pool is available.
This will increase the usage of memory pool and will reduce the
overall allocation time.
Change-Id: Iea84a4259b38fe9cb546419dfcbaf0a9666e7ca9
Signed-off-by: Deepak Kumar <dkumar@codeaurora.org>
Register the current stack and task_struct of all cpus to
the minidump table on panic.
Change-Id: I6906721f8c734dbf8142dc49e80dc730530f028c
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Changes that help facilitate sending the FPD-III to CSI bridge chip's
input signal status to the user-mode components.
Change-Id: I5e39c75b61f05edc8a1dc77677b9cad85fc563eb
Signed-off-by: Terence Ho <terenceh@codeaurora.org>
Signed-off-by: Andy Sun <bins@codeaurora.org>
Currently, SOC linearization is done when SOC masking feature is
enabled to spread out the drop in SOC across a wider range and
for better user experience. Make this configurable through a DT
property "qcom,linearize-soc" so that the user can enable it as
and when required.
Change-Id: Ic9f5f04f4e872d7804152c17206a8b204de3a9c1
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Change the regulator_ops of vbus/vconn regulators in smb2 and
smb138x drivers to static. While at it, change the interrupt
handler smb138x_handle_slave_chg_state_change to static.
Change-Id: Iacd6b84adc6db1819b4a337aac9f6ccc52989dcd
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Currently, JEITA thresholds are configured through the device
tree properties. Allow them to be configured runtime through
power supply properties.
Change-Id: Ie93c7e447a4f8ac793e6e324f7a0269dbc14c7e5
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Add POWER_SUPPLY_PROP_COLD_TEMP and POWER_SUPPLY_PROP_HOT_TEMP
properties to represent Cold and Hot JEITA thresholds of the
battery.
Change-Id: Id5e16a4f7b20bb05d997277d20db05fc08db9f33
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
CHARGE_FULL property indicates the learnt capacity of the battery
from the last capacity learning cycle. However, in some rare
cases, if the learnt capacity is having an unexpected value, it
requires a reset to a good value which is not possible for an
user who cannot reinsert a battery or do an explicit write to FG
SRAM. Allowing CHARGE_FULL to be writable helps this.
Change-Id: I05aa8392f103685f8fc1ba5a3780122150be0ee6
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Fix the bad cell count warning coming from smb138x device by
setting size-cells correctly.
Change-Id: I050471d676c8a11737d9034bd25d3e9229591752
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Update the battery profile for ascent 3450mAh battery based on
the latest characterization data.
Change-Id: I44e08b66d1f4dd424efc1595e3b4f3bbb2176a48
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
WCN3990 uses CE11 for pktlog. Enable CE interrupts
for pktlog pipe for WCN3990 target.
Change-Id: I5af4e47bc31fe0d94cacae0305a90f698e2d5a51
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Disable CONFIG_DEVPORT config for sdm660.
As selinux policy requires this node to be not
accessible to userspace.
Change-Id: I163b5bc0ad1d97590f20ffc2392c36e03be3cbf2
Signed-off-by: Mohammed Khajapasha <mkhaja@codeaurora.org>
Update HS Phy parameters which has better eye diagram.
Change-Id: I2774dc4c5512ba156dacb23e454d3f65691d5a06
Signed-off-by: Liangliang Lu <luliang@codeaurora.org>
The patch re-enables updating APPS feature mask to GLINK
supported peripheral after peripheral's feature mask has been
processed and the proper transport has been updated. The patch
also corrects code indentation in buffers initialization.
CRs-Fixed: 2092758
Change-Id: Iaff5346dae833d6dbb576ca3a4a9dbdcf789a3c4
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
