HDR metadata information is passed down from userspace
based on the HDR frame.
Program these properties to relevant HDMI registers
using the pre_kickoff callback registered for the
DRM HDMI connector.
This ensures that HDR information is updated on a
per-frame basis to the sink.
Change-Id: I20c4018316329b1b35a11b8ab4b96e923b3abb3a
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add a callback into the connector framework to allow sending
per-frame parameters at kickoff time.
This is needed to support the HDR feature where the HDR
metadata shall be sent to the sink on a per-frame basis.
Change-Id: I48a3616509e2226ea9bf0f490f0f47873ca74781
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Use metadata information sent from userspace to configure sink.
This info shall be used later on to program the HDMI specific
infoframe registers.
Change-Id: I26634452d8c3ab7ab49a65e89ad52a3961c64855
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Currently checking the IPIs even on cores which are hotplugged out
successfully. This check should happen only for cores which are
online.
Change-Id: I8fe49638f308eab97455e7cca62b01b617596de4
Signed-off-by: Naresh Malladi <namall@codeaurora.org>
Enable multichannel bit for SCO Rx to fix random 0 bytes
insertion in SCO.
CRs-Fixed: 2063152
Change-Id: I6abe986251d042ef70701b614b8cef0ee1e30044
Signed-off-by: Satish Kodishala <skodisha@codeaurora.org>
Patch adds RGB 10bit both linear and compressed, P010 linear and
and TP10 compressed pixel formats to plane and writeback capabilities.
Change-Id: Ib5a0b2dacbc1ddc47c069b4348c0d1b9fbd7701e
Signed-off-by: Alexander Beykun <abeykun@codeaurora.org>
Currently for NV12 linear/compressed format if the same gem
object assigned to both planes, total size becomes twice more
than actually allocated. In that case kernel cannot detect
case where meta data planes not allocated for NV12 compressed
buffer and smmu fault happens. Current patch sums sizes only
for different gem objects allowing kernel to detect insufficient
memory allocation for NV12 case.
Change-Id: I0d9f49b8b310f0dff1fb787b4ba821a6d4a68140
Signed-off-by: Alexander Beykun <abeykun@codeaurora.org>
Patch changes type of pixel format flags from u32 to bitmap.
Change-Id: I117f3737d78d22b9bd6d78abdb8e96f52fc4e874
Signed-off-by: Alexander Beykun <abeykun@codeaurora.org>
Add MOD_QCOM_TIGHT modifier on top of DRM_FORMAT_NV12
base pixel format and update plane size calculation
to support compressed tp10 buffers.
Change-Id: I12eb9fecfd34d488eda92f6217b6ca51e466c6f6
Signed-off-by: Alexander Beykun <abeykun@codeaurora.org>
Add MOD_QCOM_DX modifier on top of DRM_FORMAT_NV12
base format and update plane size calculation to support
linear and compressed p010 buffers.
Change-Id: I93bd9557e5c4a4a038891f24730edbbec1dba262
Signed-off-by: Alexander Beykun <abeykun@codeaurora.org>
Populate HDR sink capabilities to a DRM blob.
These capabilities shall be used by the userspace
to calculate the sink HDR properties and setting them.
Change-Id: I7c2dbca375c456052ad73889b011553090bcf8f1
Signed-off-by: Srikanth Rajagopalan <rasrik@codeaurora.org>
GSI MHI event ring error is a fatal error where there is
no recovery possible. Data path will be stalled.
This change will assert on this case.
Change-Id: I9c94e44b2f2d5e1b0b8d059b871d1bd9ad2d3fcf
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
Ringing IPA MHI event ring doorbell is done at MHI device
during MHI channel start. This is done after the rings
are allocated. The ring write pointer updated by the host is
used as the doorbell value. Doorbell ringing is required
in order to supply event credits to GSI H/W.
Change-Id: I2db110b4f99c8ab6c6878d426b3ebb37149b0b76
Signed-off-by: Ghanim Fodi <gfodi@codeaurora.org>
In case of failure to send QMI message to modem
remove the delay from AP since modem is probably
down (SSR\reboot).
Change-Id: Iae4d5162d39cd05f5c50d75087ec90dfe04a6c43
Signed-off-by: Amir Levy <alevy@codeaurora.org>
Defines the non-removable property for ufs/emmc device node
This basically lets the driver whether ufs/emmc is the boot
device
Change-Id: I7e583e0ecef064d1ed91b443fe35f98a3b2c0c8a
Signed-off-by: Lei wang <leiwan@codeaurora.org>
Add the mdss panel file to support qrd device tree overlay.
Change-Id: I65152ee6a7cafdbba299f0e0a3cac2e77c8c2660
Signed-off-by: Maria Yu <aiquny@codeaurora.org>
During hardware initialization charger is configured in
DRP mode from force UFP mode and after mode configuration
hardware takes ~300/400 msec for UFP/DFP detection. In case
if the delay between moving to DRP mode and software enabling
interrupts is more than hardware detection delay then software
will miss the detection interrupt. Fix this by moving DRP
configuration after interrupt request this ensures software will
receive interrupt once hardware detection completes.
CRs-Fixed: 2065296
Change-Id: I55c59ed558e8db40a7b1af7638832da1f9547222
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
There is no syncronization between msm_vb2_get_buf
and msm_delete_stream which can lead to use after
free.
Fixed it by using read/write lock.
Change-Id: Icff5cd81b1a4e9c28f19936dec570751feab0ccf
Signed-off-by: Manish Poddar <mpoddar@codeaurora.org>
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
Signed-off-by: Andy Sun <bins@codeaurora.org>
