Call kernel_restart instead of arch_reset, the ARM reset handling
has changed.
Remove localtimer irq printing, they now show up in the regular
irq stats.
Change-Id: I523da343b292c5711f3e1cbfd766d32eea2da84e
Signed-off-by: Colin Cross <ccross@android.com>
- In the current implementation, when a signal is sent to the reading process,
read is cancelled by calling usb_ep_dequeue, which lead into calling
acc_complete_out with ECONNRESET, but the current logic treats it as
disconnection, which makes the device inaccessible until cable is actually
disconnected.
- The fix calls disconnect only when ESHUTDOWN error is passed.
- If data has already arrived while trying cancelling, the data is marked
as available, and it will be read out on the next read. This is necessary
as USB bulk is assumed to guarantee no data loss.
Signed-off-by: keunyoung <keunyoung@google.com>
Use '%zd' format specifier for size_t type instead
of '%d' to fix build warnings like:
drivers/usb/gadget/function/u_ether.c: In function ‘rx_submit’:
drivers/usb/gadget/function/u_ether.c:244:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat=]
DBG(dev, "%s: size: %d\n", __func__, size);
^
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Use rndis_params instead of configNr to align with
changes from mainline commit 83210e59ee
"usb: gadget: rndis: use rndis_params instead of configNr".
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Declare "cdev" to fix broken AOSP commit
"RNDIS: Add Data aggregation (multi packet) support",
otherwise we run into following build failure:
CC drivers/usb/gadget/function/f_rndis.o
drivers/usb/gadget/function/f_rndis.c: In function ‘rndis_command_complete’:
drivers/usb/gadget/function/f_rndis.c:479:3: error: ‘cdev’ undeclared (first use in this function)
drivers/usb/gadget/function/f_rndis.c:479:3: note: each undeclared identifier is reported only once for each function it appears in
make[4]: *** [drivers/usb/gadget/function/f_rndis.o] Error 1
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Use '%z' format specifier for sizeof operator instead
of '%u' to fix build warnings like:
warning: format '%u' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Remove unused variables and functions to fix following
build warnings:
CC drivers/usb/gadget/configfs.o
drivers/usb/gadget/configfs.c: In function ‘gadgets_make’:
drivers/usb/gadget/configfs.c:1710:6: warning: unused variable ‘err’ [-Wunused-variable]
int err;
^
drivers/usb/gadget/configfs.c:1709:27: warning: unused variable ‘attr’ [-Wunused-variable]
struct device_attribute *attr;
^
drivers/usb/gadget/configfs.c:1708:28: warning: unused variable ‘attrs’ [-Wunused-variable]
struct device_attribute **attrs;
^
drivers/usb/gadget/configfs.c: In function ‘gadgets_drop’:
drivers/usb/gadget/configfs.c:1774:27: warning: unused variable ‘attr’ [-Wunused-variable]
struct device_attribute *attr;
^
drivers/usb/gadget/configfs.c:1773:28: warning: unused variable ‘attrs’ [-Wunused-variable]
struct device_attribute **attrs;
^
<snip>...
CC drivers/usb/gadget/function/f_mtp.o
drivers/usb/gadget/function/f_mtp.c:1219:12: warning: ‘mtp_bind_config’ defined but not used [-Wunused-function]
static int mtp_bind_config(struct usb_configuration *c, bool ptp_config)
^
drivers/usb/gadget/function/f_mtp.c:1300:12: warning: ‘mtp_setup’ defined but not used [-Wunused-function]
static int mtp_setup(void)
^
<snip>...
CC drivers/usb/gadget/function/f_accessory.o
drivers/usb/gadget/function/f_accessory.c:969:1: warning: ‘acc_function_bind’ defined but not used [-Wunused-function]
acc_function_bind(struct usb_configuration *c, struct usb_function *f) {
^
drivers/usb/gadget/function/f_accessory.c:1172:12: warning: ‘acc_bind_config’ defined but not used [-Wunused-function]
static int acc_bind_config(struct usb_configuration *c)
^
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Also select SND_PCM while building f_audio_source
otherwise we run into following build error:
LD init/built-in.o
drivers/built-in.o: In function `audio_data_complete':
/linaro/android/kernel/linaro-android/drivers/usb/gadget/function/f_audio_source.c:458: undefined reference to `snd_pcm_period_elapsed'
drivers/built-in.o: In function `audio_pcm_hw_free':
/linaro/android/kernel/linaro-android/drivers/usb/gadget/function/f_audio_source.c:770: undefined reference to `snd_pcm_lib_free_vmalloc_buffer'
drivers/built-in.o: In function `snd_pcm_lib_alloc_vmalloc_buffer':
/linaro/android/kernel/linaro-android/include/sound/pcm.h:1179: undefined reference to `_snd_pcm_lib_alloc_vmalloc_buffer'
drivers/built-in.o: In function `audio_pcm_open':
/linaro/android/kernel/linaro-android/drivers/usb/gadget/function/f_audio_source.c:734: undefined reference to `snd_pcm_limit_hw_rates'
drivers/built-in.o: In function `snd_card_setup':
/linaro/android/kernel/linaro-android/drivers/usb/gadget/function/f_audio_source.c:888: undefined reference to `snd_pcm_new'
/linaro/android/kernel/linaro-android/drivers/usb/gadget/function/f_audio_source.c:898: undefined reference to `snd_pcm_set_ops'
/linaro/android/kernel/linaro-android/drivers/usb/gadget/function/f_audio_source.c:899: undefined reference to `snd_pcm_lib_preallocate_pages_for_all'
drivers/built-in.o:(.data+0x1fd28): undefined reference to `snd_pcm_lib_ioctl'
make: *** [vmlinux] Error 1
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
There is this new mandatory UDC->reset API in v3.18+ kernels,
commit ef979a26 "usb: gadget: add reset API at usb_gadget_driver".
Let android_disconnect handle that for Android, similar to
how composite_disconnect is handling the generic ConfigFS
gadget reset request.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Android frameworks relies on the alsa
config reported by the f_midi device.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I0695e00b166fd953f50acea93802245b0d5a5240
Android frameworks (UsbDeviceManager) relies on gadget state exported
through device attributes. This CL adds the device attribute to export
USB gadget state.
Change-Id: Id0391810d75b58c579610fbec6e37ab22f28886d
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Add a missing ";" after EXPORT_SYMBOL() otherwise we run
into following build error if Kernel Modules are supported:
----------
CC drivers/usb/phy/class-dual-role.o
drivers/usb/phy/class-dual-role.c:91:1: error: expected ',' or ';' before 'int'
int dual_role_get_property(struct dual_role_phy_instance *dual_role,
^
make[3]: *** [drivers/usb/phy/class-dual-role.o] Error 1
----------
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
This CL adds a new class to monitor and change
dual role usb ports from userspace. The usb
phy drivers can register to the dual_role_usb
class and expose the capabilities of the ports.
The phy drivers can decide on whether a specific
attribute can be changed from userspace by
choosing to implement the appropriate callback.
Cherry-picked from
https://android-review.googlesource.com/#/c/167310/
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Bug: 21615151
Change-Id: Id1c4aaa97e898264d7006381a7badd029b5d9789
Fix NULL pointer dereference while trying to link PTP
function to a gadget configuration without creating
MTP function.
PTP piggyback on MTP function so make sure we have
MTP function created beforehand. Otherwise we run
into following kernel panic:
-----------------------
[ 70.329957] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 70.330738] pgd = dd8ec000
[ 70.330916] [00000000] *pgd=00000000
[ 70.331663] Internal error: Oops: 805 [#1] SMP THUMB2
[ 70.332155] CPU: 0 PID: 2067 Comm: ln Not tainted 3.18.0-00587-gdfa582e #1
[ 70.332511] task: dd9c92c0 ti: dd822000 task.ti: dd822000
[ 70.333094] PC is at function_alloc_mtp_ptp+0xe/0x68
[ 70.333311] LR is at usb_get_function+0x11/0x1c
[ 70.333489] pc : [<c034ec12>] lr : [<c033cce9>] psr: 60070033
<..snip..>
[ 70.384111] 3fc0: bec14ae4 00000004 bec14c0a 00000053 00000004 b6f0422d 00000000 bec14adc
[ 70.384369] 3fe0: bec14af8 bec14a98 b6f071f3 b6e8977c 20070010 bec14c0d 00000000 00000000
[ 70.384832] [<c034ec12>] (function_alloc_mtp_ptp) from [<c033cce9>] (usb_get_function+0x11/0x1c)
[ 70.385146] [<c033cce9>] (usb_get_function) from [<c033da9b>] (config_usb_cfg_link+0x87/0xa8)
[ 70.385421] [<c033da9b>] (config_usb_cfg_link) from [<c011f417>] (configfs_symlink+0xb7/0x1c8)
[ 70.385696] [<c011f417>] (configfs_symlink) from [<c00dcd8d>] (vfs_symlink+0x85/0xc0)
[ 70.386010] [<c00dcd8d>] (vfs_symlink) from [<c00dce0b>] (SyS_symlinkat+0x43/0x70)
[ 70.386261] [<c00dce0b>] (SyS_symlinkat) from [<c000ce41>] (ret_fast_syscall+0x1/0x5c)
[ 70.386610] Code: eb04 4a0f 6e03 480f (e883) 0005
[ 70.387346] ---[ end trace 8dba7c552e02f8fa ]---
[ 70.387647] Kernel panic - not syncing: Fatal exception
[ 70.387980] ---[ end Kernel panic - not syncing: Fatal exception
-----------------------
Steps to reproduce the kernel panic:
mount -t configfs none /config
mkdir /config/usb_gadget/g1
cd /config/usb_gadget/g1
echo 0x18d1 > idVendor
echo 0x4e26 > idProduct
mkdir strings/0x409
echo 0123459876 > strings/0x409/serialnumber
echo Asus > strings/0x409/manufacturer
echo Nexus7 > strings/0x409/product
mkdir configs/c.1
mkdir configs/c.1/strings/0x409
echo "Conf 1" > configs/c.1/strings/0x409/configuration
echo 120 > configs/c.1/MaxPower
mkdir functions/ptp.ptp
ln -s functions/ptp.ptp configs/c.1/ptp.ptp
Also MTP and PTP are mutually exclusive functions
so make sure we have only one of it linked to a
configuration at a time. Otherwise it opens up
another set of bug(s?).
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Added a device attribute to android_device to
determine USB_GADGET's state
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I17f8903120df96bf2f4bf441940b53a87b818230
configfs_composite_unbind sets the gadget data
to null. Therefore, add check in disconnect
function to make sure that cdev is not NULL.
Prints a WARN message if the driver tries to
redundantly disconnect a gadget.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Change-Id: I248cb7175d0dd9a51c18053dd39475d8b3284f6d
This patch adds support to use Android accessory
gadget function through the
DECLARE_USB_FUNCTION_INIT interface.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Change-Id: Ib352752d5bc905fa1df9049b53eabf1294930db7
This patch adds support to use audio_source
gadget function through DECLARE_USB_FUNCTION_INIT
interface.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Change-Id: I1fc6c9ea07105ae4eb785eebd3bb925bfdd8bc6b
Added create_function_device to create child
function devices for USB gadget functions.
Android UsbDeviceManager relies on communicating
to the devices created by the gadget functions
to implement functions such as audio_source.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I0df9ad86ac32d8cdacdea164e9fed49891b45fc2
While disabling ConfigFS Android gadget, android_disconnect() calls
kill_all_hid_devices(), if CONFIG_USB_CONFIGFS_F_ACC is enabled, to free
the registered HIDs without checking whether the USB accessory device
really exist or not. If USB accessory device doesn't exist then we run into
following kernel panic:
----8<----
[ 136.724761] Unable to handle kernel NULL pointer dereference at virtual address 00000064
[ 136.724809] pgd = c0204000
[ 136.731924] [00000064] *pgd=00000000
[ 136.737830] Internal error: Oops: 5 [#1] SMP ARM
[ 136.738108] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc4-00400-gf75300e-dirty #76
[ 136.742788] task: c0fb19d8 ti: c0fa4000 task.ti: c0fa4000
[ 136.750890] PC is at _raw_spin_lock_irqsave+0x24/0x60
[ 136.756246] LR is at kill_all_hid_devices+0x24/0x114
---->8----
This patch adds a test to check if USB Accessory device exists before freeing HIDs.
Change-Id: Ie229feaf0de3f4f7a151fcaa9a994e34e15ff73b
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
commit f1a1823ff2
usb: gadget: u_ether: convert into module
changes qlen function definition. and this has to be fixed
accordingly in current u_ether driver.
This patch fixes following compile error in u_ether caused by commit.
drivers/usb/gadget/u_ether.c: In function 'rx_fill':
drivers/usb/gadget/u_ether.c:416:3: error: too few arguments to function 'qlen'
if (++req_cnt > qlen(dev->gadget))
^
drivers/usb/gadget/u_ether.c: In function 'eth_start_xmit':
drivers/usb/gadget/u_ether.c:738:24: error: 'qmult' undeclared (first use in this function)
if (dev->tx_qlen == (qmult/2)) {
which was caused by commits
commit 79467317949e1621240f632acfb7453783bec2e7
USB: gadget: u_ether: Fix data stall issue in RNDIS tethering mode
commit 68b91e8c54f5c091986c5719631893b10eab760a
usb: u_ether: Add workqueue as bottom half handler for rx data path
Change-Id: Ic4e5a1e08cb688e5a606c7c1895f869d8f887b9f
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Android userspace UsbDeviceManager relies on the
uevents generated by the composition driver to
generate user notifications. This CL adds uevents
to be generated whenever USB changes its state
i.e. connected, disconnected, configured.
This CL also intercepts the setup requests from
the usb_core anb routes it to the specific
usb function if required.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: Ib3d3a78255a532f7449dac286f776c2966caf8c1
Add a pointer to the usb_function inside the
usb_function_instance structure to service
functions specific setup requests even before
the function gets added to the usb_gadget
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I6f457006f6c5516cc6986ec2acdf5b1ecf259d0c
This patch adds support to use mtp/ptp gadget functions
through the DECLARE_USB_FUNCTION_INIT interface.
enabling USB_CONFIGFS_F_MTP config compiles f_mtp.c
thereby providing support for MTP gadget
enabling USB_CONFIGFS_F_PTP config compiles f_ptp.c
thereby providing support for PTP gadget
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Change-Id: I38d7b570e8886d155ef10cd2c839b2232dcb3158
Currently DL aggregation is supported in RNDIS driver and is set to
3 by default. And there is no support to change downlink maximum
packets per transfer at runtime through module parameter. Hence add
module parameter for DL maximum packets per transfer to change it at
runtime.
echo 6 > /sys/module/g_android/parameters/rndis_dl_max_pkt_per_xfer
To disable DL aggregation during runtime,
echo 1 > /sys/module/g_android/parameters/rndis_dl_max_pkt_per_xfer
Change-Id: I3a1d0bc97358e2b6f233df7ae8725fb507de50db
Signed-off-by: Xerox Lin <xerox_lin@htc.com>
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
This change adds module param which allows to disable RNDIS
Multi-packet Feature (Aggregation support in Downlink path)
as this feature is enabled by default.
To disable use this param before moving to RNDIS Composition:
echo 1 > /sys/module/g_android/parameters/rndis_multipacket_dl_disable
Also counts errors as Rx errors if received RNDIS packets are
not following RNDIS message format as those packets are being
discarded.
Change-Id: I764430da78f2204af92e14bb279c11b24c7e4c67
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Add data aggregation support using RNDIS Multi Packet feature
to achieve better UDP Downlink throughput. Max 3 RNDIS Packets
aggregated into one RNDIS Packet with this implementation.
With this change, seeing UDP Downlink throughput increase
from 90 Mbps to above 100 Mbps when using Iperf and sending
data more than 100 Mbps.
Change-Id: I21c39482718944bb1b1068bdd02f626531e58f08
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Rajkumar Raghupathy <raghup@codeaurora.org>
For dual speed gadget, with current no. of request(10), there is
possibility of corner case occurence where all 10 reuqests are queued
to HW without setting IOC bit, which could lead to data stall in
RNDIS tethering and RNDIS local networking.
With this patch, counter will be incremented before queueing request to
HW and sets IOC bit for every nth request due to which the corner case
of all requests queued to HW without IOC bit set will be avoided.
Change-Id: I26515bfd9bbc8f7af38be7835692143f7093118a
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
On windows 7 platform, previously allocated ip address is maintained.
However, Host MAC address of 'usb0' interface is changed when the
tethering driver re-enumerated. Thus, the tethering network driver
can't be allocated ip address from dhcp. It causes connection delay
between host and phone for usb tethering.
This patch prevents from changing Host MAC address of 'usb0' interface.
In other words, this patch maintains the Host MAC address allocated when
first tethering driver although the driver is re-enumerated. However,
after reboot, the Host MAC address can be changed.
Change-Id: I43add9925e9d6d90c56cffbd3ed999104448f818
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
u_ether driver passes rx data to network layer and resubmits the
request back to usb hardware in interrupt context. Network layer
processes rx data by scheduling tasklet. For high throughput
scenarios on rx data path driver is spending lot of time in interrupt
context due to rx data processing by tasklet and continuous completion
and re-submission of the usb requests which results in watchdog bark.
Hence move the rx data processing and usb request submission to a
workqueue bottom half handler.
Change-Id: I316de8e267997137ac189a8b7b2846fa325f4a5a
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
RNDIS protocol supports data aggregation on uplink and can help
reduce mips by reducing number of interrupts on device. Throughput
also improved by 20-30%. Aggregation is disabled by setting
aggregation packet size to 1. To help better UL throughput, set
as ul aggregation support to 3 rndis packets by default. It can be
configured via module parameter: rndis_ul_max_pkt_per_xfer.
Change-Id: I0b62a21a5c3ceb6b04933d0d6da33301dbafe493
Signed-off-by: Vamsi Krishna <vskrishn@codeaurora.org>
Signed-off-by: Xerox Lin <xerox_lin@htc.com>
When rndis data transfer is in progress, some Windows7 Host PC is not
sending the GET_ENCAPSULATED_RESPONSE command for receiving the response
for the previous SEND_ENCAPSULATED_COMMAND processed.
The rndis function driver appends each response for the
SEND_ENCAPSULATED_COMMAND in a queue. As the above process got corrupted,
the Host sends a REMOTE_NDIS_RESET_MSG command to do a soft-reset.
As the rndis response queue is not freed, the previous response is sent
as a part of this REMOTE_NDIS_RESET_MSG's reset response and the Host
blocks any more Rndis transfers.
Hence free the rndis response queue as a part of this soft-reset so that
the current response for REMOTE_NDIS_RESET_MSG is sent properly during the
response command.
Change-Id: I8eff3849db452fe01b7d1fe4140ef1f1ad3f4fd4
Signed-off-by: Rajkumar Raghupathy <raghup@codeaurora.org>
Signed-off-by: Xerox Lin <xerox_lin@htc.com>
Fixed Android Issue #56549.
When both Vendor Class and Audio Class are activated for AOA 2.0,
the baInterfaceNr of the AudioControl Interface Descriptor points
to wrong interface numbers. They should be pointing to
Audio Control Device and Audio Streaming interfaces.
Replaced baInterfaceNr with the correct value.
Change-Id: Iaa083f3d97c1f0fc9481bf87852b2b51278a6351
Signed-off-by: Anson Jacob <ansonkuzhumbil@gmail.com>
Re-applying from
eb4c9d2db8
Most USB-AUDIO devices are limited to 256 byte for max iso buffer size.
If a IN_EP_MAX_PACKET_SIZE is bigger than a USB-AUDIO device's max iso
buffer size, it will cause noise. This patch will prevent this case as
possibe by reducing packet size. When using 44.1khz, 2ch, 16bit audio
data, if max packet size is bigger than 176 bytes, it's no problem.
Credits to: Iliyan Malchev <malchev@google.com>
Change-Id: Ic2a1c19ea65d5fb42bf12926b51b255b465d7215
Signed-off-by: Anson Jacob <ansonkuzhumbil@gmail.com>
Accessory connected to Android Device requires
Zero Length Packet (ZLP) to be written when data
transferred out from the Android device are multiples
of wMaxPacketSize (64bytes (Full-Speed) / 512bytes (High-Speed))
to end the transfer.
Change-Id: Ib2c2c0ab98ef9afa10e74a720142deca5c0ed476
Signed-off-by: Anson Jacob <ansonkuzhumbil@gmail.com>
Move the entire contents of linux/usb/f_accessory.h header to uapi,
it only contains a userspace interface.
Change-Id: Ieb5547da449588ae554988a201c0e6b4e3afc531
Signed-off-by: Colin Cross <ccross@android.com>
Move the most of linux/usb/f_mtp.h header to uapi. Move the only
remaining structure definition into f_mtp.c, the only place that
uses it.
Change-Id: I952c1a9dc15c36bf295a0eb4d74b6b1ad912ed03
Signed-off-by: Colin Cross <ccross@android.com>
Android MTP gadget uses 3 endpoints which are 1 in endpoint,
1 out endpoint, and 1 interrupt endpoint. However when MTP
gadget creates its endpoints, it creates the out endpoint twice
and overwrites the first created out endpoint with the second one,
so that it causes a leak of endpoint resources.
Change-Id: Iba82950095610b26b362f4b10a67cedfb1fee366
Signed-off-by: Peter Oh <poh@broadcom.com>
Reviewed-on: http://mps-gerrit.broadcom.com/37744
Reviewed-by: Graham Williams <gwilli@broadcom.com>
Reviewed-by: John Garry <jgarry@broadcom.com>
Branch-Open: Branch Status <branch_status_noreply@broadcom.com>
Reviewed-by: Checkpatch Status <checkpatch_status_noreply@broadcom.com>
Reviewed-by: Joyjit Nath <joyjit@broadcom.com>
Tested-by: AutoSubmit Status <autosubmit_status_noreply@broadcom.com>
create_bulk_endpoints should not be __init since it is called when
accessory is enabled.
Change-Id: Iac6e9f29d53c93760e926efd8e7603432632acb4
Signed-off-by: Todd Poynor <toddpoynor@google.com>
This driver presents a standard USB audio class interface to the host
and an ALSA PCM device to userspace
Change-Id: If16b14a5ff27045f9cb2daaf1ae9195c5eeab7d0
Signed-off-by: Mike Lockwood <lockwood@google.com>
