Extended sched_group_energy() to support energy prediction with usage
(tasks) added/removed from a specific cpu or migrated between a pair of
cpus. Useful for load-balancing decision making.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
For energy-aware load-balancing decisions it is necessary to know the
energy consumption estimates of groups of cpus. This patch introduces a
basic function, sched_group_energy(), which estimates the energy
consumption of the cpus in the group and any resources shared by the
members of the group.
NOTE: The function has five levels of identation and breaks the 80
character limit. Refactoring is necessary.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Add another member to the family of per-cpu sched_domain shortcut
pointers. This one, sd_ea, points to the highest level at which energy
model is provided. At this level and all levels below all sched_groups
have energy model data attached.
Partial energy model information is possible but restricted to providing
energy model data for lower level sched_domains (sd_ea and below) and
leaving load-balancing on levels above to non-energy-aware
load-balancing. For example, it is possible to apply energy-aware
scheduling within each socket on a multi-socket system and let normal
scheduling handle load-balancing between sockets.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Move cpu_util() to an earlier position in fair.c and change return
type to unsigned long as negative usage doesn't make much sense. All
other load and capacity related functions use unsigned long including
the caller of cpu_util().
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
capacity_orig_of() returns the max available compute capacity of a cpu.
For scale-invariant utilization tracking and energy-aware scheduling
decisions it is useful to know the compute capacity available at the
current OPP of a cpu.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Provides the scheduler with a cpu scaling correction factor for more
accurate load-tracking and cpu capacity handling.
The Energy Model (EM) (in fact the capacity value of the last element
of the capacity states vector of the core (MC) level sched_group_energy
structure) is used as the source for this cpu scaling factor.
The cpu capacity value depends on the micro-architecture and the
maximum frequency of the cpu.
The maximum frequency part should not be confused with the frequency
invariant scheduler load-tracking support which deals with frequency
related scaling due to DFVS functionality.
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Provides the scheduler with a cpu scaling correction factor for more
accurate load-tracking and cpu capacity handling.
The Energy Model (EM) (in fact the capacity value of the last element
of the capacity states vector of the core (MC) level sched_group_energy
structure) is used instead of the arm arch specific cpu_efficiency and
dtb property 'clock-frequency' values as the source for this cpu
scaling factor.
The cpu capacity value depends on the micro-architecture and the
maximum frequency of the cpu.
The maximum frequency part should not be confused with the frequency
invariant scheduler load-tracking support which deals with frequency
related scaling due to DFVS functionality.
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
cpufreq is currently keeping it a secret which cpus are sharing
clock source. The scheduler needs to know about clock domains as well
to become more energy aware. The SD_SHARE_CAP_STATES domain flag
indicates whether cpus belonging to the sched_domain share capacity
states (P-states).
There is no connection with cpufreq (yet). The flag must be set by
the arch specific topology code.
cc: Russell King <linux@arm.linux.org.uk>
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
The sched_group_energy (sge) pointer of the first sched_group (sg) in
the sched_domain (sd) is initialized to point to the appropriate (in
terms of sd level and cpu) sge data defined in the arch and so to the
correct part of the Energy Model (EM).
Energy-aware scheduling allows that a system has only EM data up to a
certain sd level (so called highest energy aware balancing sd level).
A check in init_sched_energy() enforces that all sd's below this sd
level contain EM data.
The 'int cpu' parameter of sched_domain_energy_f requires that
check_sched_energy_data() makes sure that all cpus spanned by a sg
are provisioned with the same EM data.
This patch has also been tested with feature FORCE_SD_OVERLAP enabled.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
The struct sched_group_energy represents the per sched_group related
data which is needed for energy aware scheduling. It contains:
(1) number of elements of the idle state array
(2) pointer to the idle state array which comprises 'power consumption'
for each idle state
(3) number of elements of the capacity state array
(4) pointer to the capacity state array which comprises 'compute
capacity and power consumption' tuples for each capacity state
The struct sched_group obtains a pointer to a struct sched_group_energy.
The function pointer sched_domain_energy_f is introduced into struct
sched_domain_topology_level which will allow the arch to pass a particular
struct sched_group_energy from the topology shim layer into the scheduler
core.
The function pointer sched_domain_energy_f has an 'int cpu' parameter
since the folding of two adjacent sd levels via sd degenerate doesn't work
for all sd levels. I.e. it is not possible for example to use this feature
to provide per-cpu energy in sd level DIE on ARM's TC2 platform.
It was discussed that the folding of sd levels approach is preferable
over the cpu parameter approach, simply because the user (the arch
specifying the sd topology table) can introduce less errors. But since
it is not working, the 'int cpu' parameter is the only way out. It's
possible to use the folding of sd levels approach for
sched_domain_flags_f and the cpu parameter approach for the
sched_domain_energy_f at the same time though. With the use of the
'int cpu' parameter, an extra check function has to be provided to make
sure that all cpus spanned by a sched group are provisioned with the same
energy data.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
This patch introduces the ENERGY_AWARE sched feature, which is
implemented using jump labels when SCHED_DEBUG is defined. It is
statically set false when SCHED_DEBUG is not defined. Hence this doesn't
allow energy awareness to be enabled without SCHED_DEBUG. This
sched_feature knob will be replaced later with a more appropriate
control knob when things have matured a bit.
ENERGY_AWARE is based on per-entity load-tracking hence FAIR_GROUP_SCHED
must be enable. This dependency isn't checked at compile time yet.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
This documentation patch provides an overview of the experimental
scheduler energy costing model, associated data structures, and a
reference recipe on how platforms can be characterized to derive energy
models.
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Scenarios with the busiest group having just one task and the local
being idle on topologies with sched groups with different numbers of
cpus manage to dodge all load-balance bailout conditions resulting the
nr_balance_failed counter to be incremented. This eventually causes a
pointless active migration of the task. This patch prevents this by not
incrementing the counter when the busiest group only has one task.
ASYM_PACKING migrations and migrations due to reduced capacity should
still take place as these are explicitly captured by
need_active_balance().
A better solution would be to not attempt the load-balance in the first
place, but that requires significant changes to the order of bailout
conditions and statistics gathering.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
We do not want to miss out on the ability to pull a single remaining
task from a potential source cpu towards an idle destination cpu. Add an
extra criteria to need_active_balance() to kick off active load balance
if the source cpu is over-utilized and has lower capacity than the
destination cpu.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
find_idlest_group() selects the wake-up target group purely
based on group load which leads to suboptimal choices in low load
scenarios. An idle group with reduced capacity (due to RT tasks or
different cpu type) isn't necessarily a better target than a lightly
loaded group with higher capacity.
The patch adds spare capacity as an additional group selection
parameter. The target group is now selected based on the following
criteria:
1. Return the group with the cpu with most spare capacity and this
capacity is significant if such group exists. Significant spare capacity
is currently at least 20% to spare.
2. Return the group with the lowest load, unless it is the local group
in which case NULL is returned and the search is continued at the next
(lower) level.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Wakeup balancing is completely unaware of cpu capacity, cpu utilization
and task utilization. The task is preferably placed on a cpu which is
idle in the instant the wakeup happens. New tasks
(SD_BALANCE_{FORK,EXEC} are placed on an idle cpu in the idlest group if
such can be found, otherwise it goes on the least loaded one. Existing
tasks (SD_BALANCE_WAKE) are placed on the previous cpu or an idle cpu
sharing the same last level cache unless the wakee_flips heuristic in
wake_wide() decides to fallback to considering cpus outside SD_LLC.
Hence existing tasks are not guaranteed to get a chance to migrate to a
different group at wakeup in case the current one has reduced cpu
capacity (due RT/IRQ pressure or different uarch e.g. ARM big.LITTLE).
They may eventually get pulled by other cpus doing
periodic/idle/nohz_idle balance, but it may take quite a while before it
happens.
This patch adds capacity awareness to find_idlest_{group,queue} (used by
SD_BALANCE_{FORK,EXEC} and SD_BALANCE_WAKE under certain circumstances)
such that groups/cpus that can accommodate the waking task based on task
utilization are preferred. In addition, wakeup of existing tasks
(SD_BALANCE_WAKE) is sent through find_idlest_{group,queue} also if the
task doesn't fit the capacity of the previous cpu to allow it to escape
(override wake_affine) when necessary instead of relying on
periodic/idle/nohz_idle balance to eventually sort it out.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
To be able to compare the capacity of the target cpu with the highest
cpu capacity of the system in the wakeup path, store the system-wide
maximum cpu capacity in the root domain.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
arch_scale_cpu_capacity() is no longer a weak function but a #define
instead. Include the #define in topology.h.
cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Defines arch_scale_freq_capacity() to use cpufreq implementation.
Including <linux/cpufreq.h> in topology.h like for the arm arch doesn't
work because of CONFIG_COMPAT=y (Kernel support for 32-bit EL0).
That's why cpufreq_scale_freq_capacity() has to be declared extern in
topology.h.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Implements cpufreq_scale_freq_capacity() to provide the scheduler with a
frequency scaling correction factor for more accurate load-tracking.
The factor is:
current_freq(cpu) << SCHED_CAPACITY_SHIFT / max_freq(cpu)
In fact, freq_scale should be a struct cpufreq_policy data member. But
this would require that the scheduler hot path (__update_load_avg()) would
have to grab the cpufreq lock. This can be avoided by using per-cpu data
initialized to SCHED_CAPACITY_SCALE for freq_scale.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
If a newly created task is selected to go to a different CPU in fork
balance when it wakes up the first time, its load averages should
not be removed from the source CPU since they are never added to
it before. The same is also applicable to a never used group entity.
Fix it in remove_entity_load_avg(): when entity's last_update_time
is 0, simply return. This should precisely identify the case in
question, because in other migrations, the last_update_time is set
to 0 after remove_entity_load_avg().
Reported-by: Steve Muckle <steve.muckle@linaro.org>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
[peterz: cfs_rq_last_update_time]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <Juri.Lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20151216233427.GJ28098@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Single fix for machines with pages > 4k (PPC mostly). There's a bug in our
optimal transfer size code where we don't account for pages > 4k and can set
the transfer size to be less than the page size causing nasty failures.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJWkUiHAAoJEDeqqVYsXL0MArAH/2XWKJGI9tr0AQQ79WGD/kjV
KZsUjKP9sshjxXBB8jK+TFvO/Z2BE92XzXtIswgdc6OdeANyhE+LhdbNpuooX2gv
lW28RAbSVLrwJzyr7B2VGAiCOR9opGu2opOJnQMo05pSAFqJxNG4l1Ap+4pOX9/1
ffTwidgk6bWs5zKlDwbETHVv/X50U90O5MyJBvf9KC7YvFhD41OIz7QEqiHgs1qW
T6J80ZH4ZhWN+pRMHlybJ7RwP7TVjUSkDRLWRSX8IWjisbDqY86JVVt/BUA3lbhL
sLDc/mku3ZPsRAUJL544ydAPWA2DtJ9PjPkYuMgPQOCyUfAKq5OTf6hG0Mghm34=
=n00Y
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single fix for machines with pages > 4k (PPC mostly).
There's a bug in our optimal transfer size code where we don't account
for pages > 4k and can set the transfer size to be less than the page
size causing nasty failures"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
sd: Reject optimal transfer length smaller than page size
TI DRA7xx host bridge driver
Mark driver as broken (Richard Cochran)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=srOL
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.4-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixlet from Bjorn Helgaas:
"This marks the TI DRA7xx host bridge driver as broken. Apparently it
has never worked without some additional out-of-tree code, so I'm
going to mark it broken now and remove it completely next cycle unless
it's fixed"
* tag 'pci-v4.4-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: dra7xx: Mark driver as broken
kernel test robot has reported the following crash:
BUG: unable to handle kernel NULL pointer dereference at 00000100
IP: [<c1074df6>] __queue_work+0x26/0x390
*pdpt = 0000000000000000 *pde = f000ff53f000ff53 *pde = f000ff53f000ff53
Oops: 0000 [#1] PREEMPT PREEMPT SMP SMP
CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.4.0-rc4-00139-g373ccbe #1
Workqueue: events vmstat_shepherd
task: cb684600 ti: cb7ba000 task.ti: cb7ba000
EIP: 0060:[<c1074df6>] EFLAGS: 00010046 CPU: 0
EIP is at __queue_work+0x26/0x390
EAX: 00000046 EBX: cbb37800 ECX: cbb37800 EDX: 00000000
ESI: 00000000 EDI: 00000000 EBP: cb7bbe68 ESP: cb7bbe38
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: 00000100 CR3: 01fd5000 CR4: 000006b0
Stack:
Call Trace:
__queue_delayed_work+0xa1/0x160
queue_delayed_work_on+0x36/0x60
vmstat_shepherd+0xad/0xf0
process_one_work+0x1aa/0x4c0
worker_thread+0x41/0x440
kthread+0xb0/0xd0
ret_from_kernel_thread+0x21/0x40
The reason is that start_shepherd_timer schedules the shepherd work item
which uses vmstat_wq (vmstat_shepherd) before setup_vmstat allocates
that workqueue so if the further initialization takes more than HZ we
might end up scheduling on a NULL vmstat_wq. This is really unlikely
but not impossible.
Fixes: 373ccbe592 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress")
Reported-by: kernel test robot <ying.huang@linux.intel.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the final small set of ARM SoC bug fixes for linux-4.4,
almost all regressions:
OMAP: data corruption on the Nokia N900 flash
Allwinner: Two defconfig change to get USB working again
ARM Versatile: Interrupt numbers gone bad after an older bug fix
Nomadik: Crashes from incorrect L2 cache settings
VIA vt8500: SD/MMC support on WM8650 never worked
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Z1E0
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is the final small set of ARM SoC bug fixes for linux-4.4, almost
all regressions:
OMAP:
- data corruption on the Nokia N900 flash
Allwinner:
- Two defconfig change to get USB working again
ARM Versatile:
- Interrupt numbers gone bad after an older bug fix
Nomadik:
- Crashes from incorrect L2 cache settings
VIA vt8500:
- SD/MMC support on WM8650 never worked"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
dts: vt8500: Add SDHC node to DTS file for WM8650
ARM: Fix broken USB support in multi_v7_defconfig for sunxi devices
ARM: versatile: fix MMC/SD interrupt assignment
ARM: nomadik: set latencies to 8 cycles
ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption
ARM: Fix broken USB support in sunxi_defconfig
a patch found in your master branch but not yet in the kvm/next branch
that is destined for 4.5.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJWj+yRAAoJEL/70l94x66DulYH/0OGP+yIHDDFlBqtPRm6q0pr
r8pSVRPPd4GY2SOJDBsBvMmWphFSYKIoCTyMbFnikADHM2yh/pycwLU/uzCM5xQl
uABMsCUntwbGaKq+A4bOvsNO49ueRCkML4ToVuKNTeuEKRYfdnlj3XcAMMgsUfEF
QGz8W2cm9xPn69df91cfBuFLLFeQVv2XsjA5WpqzzvWy5HEs1F07aVh57TI4j8OF
eFdn3Lkes9Ync70KjEy2QKe2Su0EWjderE0oqAORKomwZFVCYv/Vg1wERJYsugg5
UyYCY2j1tKlycKYDnO47L1xoS9JgMHY05OsH08Sn/EXBjRjnEVwTyco5pGPmuNA=
=5Lst
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fix from Paolo Bonzini:
"A simple fix. I'm sending it before the merge window, because it
refines a patch found in your master branch but not yet in the
kvm/next branch that is destined for 4.5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: x86: only channel 0 of the i8254 is linked to the HPET
Just one obvious fix that adds a missing function argument in
ACPI code introduced recently (Kees Cook).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=XAk2
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Just one obvious fix that adds a missing function argument in ACPI
code introduced recently (Kees Cook)"
* tag 'pm+acpi-4.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / property: avoid leaking format string into kobject name
Pull x86 fixes from Ingo Molnar:
"A handful of x86 fixes:
- a syscall ABI fix, fixing an Android breakage
- a Xen PV guest fix relating to the RTC device, causing a
non-working console
- a Xen guest syscall stack frame fix
- an MCE hotplug CPU crash fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/numachip: Fix NumaConnect2 MMCFG PCI access
x86/entry: Restore traditional SYSENTER calling convention
x86/entry: Fix some comments
x86/paravirt: Prevent rtc_cmos platform device init on PV guests
x86/xen: Avoid fast syscall path for Xen PV guests
x86/mce: Ensure offline CPUs don't participate in rendezvous process
Pull perf fixes from Ingo Molnar:
"Two core subsystem fixes, plus a handful of tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix race in swevent hash
perf: Fix race in perf_event_exec()
perf list: Robustify event printing routine
perf list: Add support for PERF_COUNT_SW_BPF_OUT
perf hists browser: Fix segfault if use symbol filter in cmdline
perf hists browser: Reset selection when refresh
perf hists browser: Add NULL pointer check to prevent crash
perf buildid-list: Fix return value of perf buildid-list -k
perf buildid-list: Show running kernel build id fix
Pull block revert from Jens Axboe:
"The previous pull request had a split fix for NVMe, however there are
corner cases where that ends up blowing up.
So let's revert it for 4.4. The regression isn't introduced in this
cycle, and it's "just" a performance regression, not a
stability/integrity issue"
* 'for-linus' of git://git.kernel.dk/linux-block:
Revert "block: Split bios on chunk boundaries"
Late fixes for 4.4 are three fixes for drivers which include a
revert of mic-x100 fix which is causing regression, xgene fix for
double IRQ and async_tx fix to use GFP_NOWAIT
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jYJY
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-4.4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Late fixes for 4.4 are three fixes for drivers which include a revert
of mic-x100 fix which is causing regression, xgene fix for double IRQ
and async_tx fix to use GFP_NOWAIT"
* tag 'dmaengine-fix-4.4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: xgene-dma: Fix double IRQ issue by setting IRQ_DISABLE_UNLAZY flag
async_tx: use GFP_NOWAIT rather than GFP_IO
dmaengine: Revert "dmaengine: mic_x100: add missing spin_unlock"
Pull dmi fix from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi_scan: Fix UUID endianness for SMBIOS >= 2.6
A slightly higher volume than a new year's wish, but not too
worrisome: a large LOC is only for HD-audio device-specific quirks,
so fairly safe to apply. The rest ASoC fixes are all trivial and
small; a simple replacement of mutex call with nested lock version,
a few Arizona and Realtek codec fixes, and a regression fix for
Skylake firmware handling.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=XSAp
-----END PGP SIGNATURE-----
Merge tag 'sound-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A slightly higher volume than a new year's wish, but not too
worrisome: a large LOC is only for HD-audio device-specific quirks, so
fairly safe to apply. The rest ASoC fixes are all trivial and small;
a simple replacement of mutex call with nested lock version, a few
Arizona and Realtek codec fixes, and a regression fix for Skylake
firmware handling"
* tag 'sound-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: Intel: Skylake: Fix the memory leak
ASoC: Intel: Skylake: Revert previous broken fix memory leak fix
ASoC: Use nested lock for snd_soc_dapm_mutex_lock
ASoC: rt5645: add sys clk detection
ALSA: hda - Add keycode map for alc input device
ALSA: hda - Add mic mute hotkey quirk for Lenovo ThinkCentre AIO
ASoC: arizona: Fix bclk for sample rates that are multiple of 4kHz
on Nokia N900.
Looks like we have a GPMC bus timing bug that has gone unnoticed
because of bootloader configured registers until few days ago. We
are not detecting the onenand clock rate properly unless we have
CONFIG_OMAP_GPMC_DEBUG set and this causes onenand corruption
that can be easily be reproduced.
There seems to be also an additional bug still lurking around for
onenand corruption. But that is still being investigated and
it does not seem to be GPMC timings related.
Meanwhile, it would be good to get this fix into v4.4 to prevent
wrong timings from corrupting onenand.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QtBl
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.4/onenand-corruption' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Pull "urgent onenand file system corruption fix for n900" from Tony Lindgren:
Last minute urgent pull request to prevent file system corruption
on Nokia N900.
Looks like we have a GPMC bus timing bug that has gone unnoticed
because of bootloader configured registers until few days ago. We
are not detecting the onenand clock rate properly unless we have
CONFIG_OMAP_GPMC_DEBUG set and this causes onenand corruption
that can be easily be reproduced.
There seems to be also an additional bug still lurking around for
onenand corruption. But that is still being investigated and
it does not seem to be GPMC timings related.
Meanwhile, it would be good to get this fix into v4.4 to prevent
wrong timings from corrupting onenand.
* tag 'omap-for-v4.4/onenand-corruption' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption
This reverts commit d380561113.
If we end up splitting on the first segment, we don't adjust
the sector count. That results in hitting a BUG() with attempting
to split 0 sectors.
As this is just a performance issue and not a regression since
4.3 release, let's just rever this change. That gives us more
time to test a real fix for 4.5, which would be marked for
stable anyway.
Mark the dra7xx PCI host driver as broken. This driver was first merged in
v3.17 and has never worked. Although the driver compiles just fine, it is
missing an essential device reset. If the driver is included, the kernel
locks up hard shortly after booting, before any console output appears.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The dmi_ver wasn't updated correctly before the dmi_decode method run
to save the uuid.
That resulted in "dmidecode -s system-uuid" and
/sys/class/dmi/id/product_uuid disagreeing. The latter was buggy and
this fixes it.
Reported-by: Federico Simoncelli <fsimonce@redhat.com>
Fixes: 9f9c9cbb60 ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists")
Fixes: 79bae42d51 ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
The dn->name is expected to be used as a literal, so add the missing
"%s".
Fixes: 263b4c1a64 (ACPI / property: Expose data-only subnodes via sysfs)
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull drm nouveau fix from Dave Airlie:
"Still not back to work, but I decided to forward this fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/gr/nv40: fix oops in interrupt handler
The patches include fixes for:
* Two build issues, one in the ipmmu-vmsa driver and one for the
new generic dma-api implemention used on arm64
* A performance fix for said dma-api implemention
* An issue caused by a wrong offset in map_sg in the same code
as above
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=AFI4
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v4.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Two build issues, one in the ipmmu-vmsa driver and one for the new
generic dma-api implemention used on arm64
- A performance fix for said dma-api implemention
- An issue caused by a wrong offset in map_sg in the same code as above
* tag 'iommu-fixes-v4.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/dma: Use correct offset in map_sg
iommu/ipmmu-vmsa: Don't truncate ttbr if LPAE is not enabled
iommu/dma: Avoid unlikely high-order allocations
iommu/dma: Add some missing #includes
ftrace_module_init() and do_init_module() that the allocations made
in ftrace_module_init() will not be freed, resulting in a memory leak.
The solution is to call ftrace_release_mod() on the failing module in
the fail path befor do_init_module() is called. This will remove any
allocations made for that module, and nothing if ftrace_module_init()
wasn't called yet for that module.
Note, once do_init_module() is called, the MODULE_GOING notifiers are
called for the failed module, which calls into the ftrace code to do the
proper clean up (basically calling ftrace_release_mod()).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWjqzAAAoJEKKk/i67LK/8WgIH/3OTlOqrr527nodzj5glLgyn
GJRyQcI2VNq1m63KjWRO1QtH0OPIB/kFEyBVruNb3FEU3jQHgUNOk5whDkiOdcbp
yXBXkTkhyNOSAUxm95drUkEQiwDScfU6FjUy2dQjdyi4+86sYKRP+FIdL6B1Q5vk
M2w2JRVe2HU5RnONf63AUPcRRA+PbUqGk3S9i+HwOfCMqVEEoayRVmxibTnlEsba
YCf6d1ppzimd4c2FcyCnoyFGkfDUZWDQw2RFdWaEtOTKTzFz25hMebw4omwMQ9pt
gdbve/sY2e9BI4yHIew+tmDDWqfT8ejpXhn/eOzWd074HD7hzxU7xfd2UXZRD7w=
=x94j
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.4-rc4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"PeiyangX Qiu reported that if a module fails to load between calling
ftrace_module_init() and do_init_module() that the allocations made in
ftrace_module_init() will not be freed, resulting in a memory leak.
The solution is to call ftrace_release_mod() on the failing module in
the fail path befor do_init_module() is called. This will remove any
allocations made for that module, and nothing if ftrace_module_init()
wasn't called yet for that module.
Note, once do_init_module() is called, the MODULE_GOING notifiers are
called for the failed module, which calls into the ftrace code to do
the proper clean up (basically calling ftrace_release_mod())"
* tag 'trace-v4.4-rc4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/module: Call clean up function when module init fails early
If the module init code fails after calling ftrace_module_init() and before
calling do_init_module(), we can suffer from a memory leak. This is because
ftrace_module_init() allocates pages to store the locations that ftrace
hooks are placed in the module text. If do_init_module() fails, it still
calls the MODULE_GOING notifiers which will tell ftrace to do a clean up of
the pages it allocated for the module. But if load_module() fails before
then, the pages allocated by ftrace_module_init() will never be freed.
Call ftrace_release_mod() on the module if load_module() fails before
getting to do_init_module().
Link: http://lkml.kernel.org/r/567CEA31.1070507@intel.com
Reported-by: "Qiu, PeiyangX" <peiyangx.qiu@intel.com>
Fixes: a949ae560a "ftrace/module: Hardcode ftrace_module_init() call into load_module()"
Cc: stable@vger.kernel.org # v2.6.38+
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since WM8650 has the same 'WMT' SDHC controller as WM8505, and the driver
is already in the kernel, this node enables the controller support for
WM8650
Signed-off-by: Roman Volkov <rvolkov@v1ros.org>
Reviewed-by: Alexey Charkov <alchark@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 69fb4dcada ("power: Add an axp20x-usb-power driver") introduced a
new driver for the USB power supply used on various Allwinner based SBCs.
However, the driver was not added to multi_v7_defconfig which breaks USB
support for some boards (e.g. LeMaker BananaPi) as the kernel will now
turn off the USB power supply during boot by default if the driver isn't
present. (This was not the case in linux 4.3 or lower where the USB power
was always left on.)
Hence, add the driver to multi_v7_defconfig in order to keep USB support
working on those boards that require it.
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Tested-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
While setting the KVM PIT counters in 'kvm_pit_load_count', if
'hpet_legacy_start' is set, the function disables the timer on
channel[0], instead of the respective index 'channel'. This is
because channels 1-3 are not linked to the HPET. Fix the caller
to only activate the special HPET processing for channel 0.
Reported-by: P J P <pjp@fedoraproject.org>
Fixes: 0185604c2d
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When mapping a non-page-aligned scatterlist entry, we copy the original
offset to the output DMA address before aligning it to hand off to
iommu_map_sg(), then later adding the IOVA page address portion to get
the final mapped address. However, when the IOVA page size is smaller
than the CPU page size, it is the offset within the IOVA page we want,
not that within the CPU page, which can easily be larger than an IOVA
page and thus result in an incorrect final address.
Fix the bug by taking only the IOVA-aligned part of the offset as the
basis of the DMA address, not the whole thing.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
